we used for sale

Type: Petrol engine driven welder-generator set Manufacturer: Mosa / Novellini Model: WS 220 TDC / EW220TDC Engine: Briggs & Stratton Vanguard petrol engine Generator output: 6.5 kVA three phase Single phase output: 3.5 kVA Welding current: 40 - 220 A Voltage: 230 / 400 V Frequency: 50 Hz Speed: 3000 rpm Phase: 3 phase Control panel: Welding current selector, industrial sockets and generator mode switch Cooling: Air cooled Condition: Used condition with scratches, paint damage and traces of corrosion Remarks: Mobile combined generator and welding unit mounted in tubular steel frame; functionality not tested Auction-ID: A7-45990-92

Heavy‑duty industrial welding power source Auction-ID: A7-45993-189

This inverter model has the latest functions and features to successfully complete welding work. The inverter is user-friendly and efficient and thus a valuable addition to the workshop of the professional welder or solder. The high-frequency ignition on this inverter makes it possible to use the device without having to stroke the electrode during stick welding. The robust handle also gives you more grip during heavy work. In addition, this makes it a lot easier to take the tool with you for working on location. The inverter housing is also extremely strong, so vibrations and even unexpected contact with other devices or components do not have a negative impact on operation or durability. Auction-ID: A1-40256-138

3 industrial welders with wire feeder Auction-ID: A7-45993-190

2 industrial welders with wire feeder Auction-ID: A7-45993-183

Type: Toe hydraulic jack Manufacturer: Webley Technical data: Lifting capacity: 20 t Lifting height: 6 inch Execution: Mechanical/hydraulic lifting jack with toe support Remarks: Surface wear and paint damage visible Remarks 2: Rust traces present Remarks 3: Sold as shown in photos Condition: Used Auction-ID: A7-45993-112

Cycle lathe Weiler E 50/1 Year of Make: 1997 Technical data Manufacturer: HAMLET Type: E 50 / 1 Year of Make: 1997 Tip height: 280 mm Center width: 1,000 mm Swing diameter: 500 mm Circumferential diameter over bed: 570 mm Circumferential diameter over support: 340 mm Spindle speeds: 0 - 2,500 rpm Lining: available Auction-ID: A1-46872-35

Industrial vacuum cleaner 80L wet/dry AND a spot cleaner, powerful steam cleaning. Vacuum cleaner: 3 motors a 1000w / per motor can be turned on, for wet and dry use. Spacious capacity – 80 liter tank. Safe & certified – The vacuum cleaner complies with CE standards, which guarantees safety and reliability. Industrial design – Built for the toughest conditions. Solid wheels, strong housing and easy-to-clean filter system. AND Steam cleaner 1200W: efficiently cleans stubborn dirt stains, e.g. for carpets, stairs, sofas, mattresses, curtains, car, lime and grease. Compact size. 220 V - 50 Hz Rated power: 1200 W Clean water tank capacity: 1600 ml Waste water tank capacity: 900 ml Power cable length: 5 m Hose length: 1.7 m 2 extra brushes Auction-ID: A1-40256-123

Welding machine |AND a tool case Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min AND Tool case incl 144 pcs tools Auction-ID: A1-40256-129

QUANTITY : 50 pcs Ideal for: building Residential and commercial construction Export & resale Buyers are strongly encouraged to attend the viewing/inspection before placing a bid, in order to assess the condition of products After purchase, we provide assistance with loading of the products. All items are sold as-is, where-is, with no guarantees or warranties. No complaints or claims will be accepted after the purchase is completed. Truck capacity may vary depending on pallet dimensions, packaging and loading method.” Images are for illustrative purposes only. The actual product is defined by the material list and quantities provided in the description Auction-ID: A7-46792-71

2 industrial welders with wire feeder Auction-ID: A7-45993-175

QUANTITY : 50 pcs Ideal for: building Residential and commercial construction Export & resale Buyers are strongly encouraged to attend the viewing/inspection before placing a bid, in order to assess the condition of products After purchase, we provide assistance with loading of the products. All items are sold as-is, where-is, with no guarantees or warranties. No complaints or claims will be accepted after the purchase is completed. Truck capacity may vary depending on pallet dimensions, packaging and loading method.” Images are for illustrative purposes only. The actual product is defined by the material list and quantities provided in the description Auction-ID: A7-46792-70

Industrial welder with wire feeder Auction-ID: A7-45993-182

5 industrial welders with wire feeder Auction-ID: A7-45993-180

Produces 30 kg of ice cubes per 24 hours, storage capacity of 13 kg. Viewing by appointment. Auction-ID: A1-40256-44

Technical details Manufacturer: CEM Model: PBF 26P Type: Pneumatic resistance spot welding machine Power: 25 kW Duty cycle: 20% Configuration: - Pedal-operated system - Dual copper welding arms - Pneumatic actuation - Water-cooled electrodes and arms Equipment: - Foot pedal - Adjustable weld cycle controls - Adjustable amperage controls - Cooling and ventilation system Application: Resistance spot welding of sheet metal components in industrial fabrication and workshop environments Condition: Used Auction-ID: A7-40834-5

5 industrial welders with wire feeder Auction-ID: A7-45993-176

2 heavy‑duty industrial welding power sources Auction-ID: A7-45993-179

Tool trolley 12 drawers, 293 pcs AND an industrial vacuum cleaner 80 liters. Professional tool trolley, 12 drawers of which 11 filled with 293 pcs tools, Heavy equipment. 600 kg load capacity. Softclose mechanism. 2 swivel wheels and 4 keys. AND an industrial vacuum cleaner wet/dry, 80 liters, 3 motors a 1000w / per motor to be turned on, for wet and dry use. This vacuum cleaner is designed for maximum flexibility. Whether it's fine dust, coarse dirt or liquids: it sucks it all up Auction-ID: A1-40256-71

2 industrial welders with wire feeder Auction-ID: A7-45993-186

2 industrial welders with wire feeder Auction-ID: A7-45993-191

Multi-Process Welding Machine Functions: MIG/MAG, TIG & MMA Adjustable amperage: 30-400 amps duty cycle: 100% duty cycle at 221 Amps Equipped with: LCD color display Equipped with: wire feed unit Includes: MIG/MAG torch Includes: MMA torch Includes: TIG torch Including: ground cable Includes: Electronic gas regulator Connection: 380 volts (plug not included) Technology: IGBT Technology Protection: circuit breaker Including: manual Condition: unused, in the original packaging

Basic set 3 / 43 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 12 pcs quick-clamping bolts 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 100mm 2 pcs stop and clamping angle 175mm 2 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 pc. eccentric stop 100mm diameter 1 Burner Holder 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, natural, organic based 2 pcs Welding Table Cleaner 500ml, natural, bio-based Condition: never used / new (5)

portable MMA welding machine Function: Electrode Welding (MMA) Adjustable amperage: 10-130 amps Electrodes: Suitable for electrodes from 1.6 to 3.2 mm Ø duty cycle: 25% duty cycle Equipped with: LED display Includes: MMA torch Connection: 220 volts Technology: IGBT Technology Equipped with: "Hot-start", "Arc Force" & "Anti-sticking" function Features: Small size, lightweight, portable and easy to use Including: manual Condition: unused, in the original packaging

portable MMA welding machine Function: Electrode Welding (MMA) Adjustable amperage: 10-130 amps Electrodes: Suitable for electrodes from 1.6 to 3.2 mm Ø duty cycle: 25% duty cycle Equipped with: LED display Includes: MMA torch Connection: 220 volts Technology: IGBT Technology Equipped with: "Hot-start", "Arc Force" & "Anti-sticking" function Features: Small size, lightweight, portable and easy to use Including: manual Condition: unused, in the original packaging

Technical data Manufacturer: WEILER Model: Commodor B Machine Type: Lead and Pull Spindle Lathe Turning diameter over bed: 380 mm Turning diameter over slide: 190 mm Center width: 750 / 1000 mm Spindle bore: approx. 56 mm Spindle speed: 25 – 2000 rpm Connected load: 4 kW Voltage: 380 V Weight: approx. 1300 – 1500 kg Configuration Lead and pull spindle Tapping function (metric / inch) 3-jaw chuck Additional chuck Multifix tool holder Tailstock Coolant Setup Chip tray Note Technical data was taken from the nameplate and machine documentation. Specifications may vary depending on the version.

This inverter model has the latest functions and features to successfully complete welding work. The inverter is user-friendly and efficient and thus a valuable addition to the workshop of the professional welder or solder. The high-frequency ignition on this inverter makes it possible to use the device without having to stroke the electrode during stick welding. The robust handle also gives you more grip during heavy work. In addition, this makes it a lot easier to take the tool with you for working on location. The inverter housing is also extremely strong, so vibrations and even unexpected contact with other devices or components do not have a negative impact on operation or durability.

Mobile stationary welding fume extractor. dust extractor, filter ESTA SRF K-10 1.3 Kw (230V) fan placed on the clean side. Extraction arm with a range of 2 m. Capacity 950 m3/h. Vacuum pressure 2800 Pa. The SRF K series is designed for the extraction and filtration of welding fumes and light grinding dust. It is the perfect solution to the problem of welding fumes and other dust pollution. Fjc Hrpqslqw Igol Dofw Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. Thanks to the high air flow rate, even large clouds of smoke can be extracted. Manually activated automatic filter cleaning - after the work is finished, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through the rotating nozzle, significantly extending the life of the cartridge. ...

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, so the table with pallet truck. The accessories shown are optional Table length 2000 mm Table width 1000 mm Table height 850 - 900 mm Machine weight approx. 0.45 t Condition: never used / new (5)

Water-cooled multi-process welding machine Functions: MIG/MAG, TIG & MMA Adjustable amperage: 30-350 amps duty cycle: 60% duty cycle (250 A) Equipped with: LCD color display Equipped with: water cooler for MIG/MAG torch Includes: water-cooled MIG/MAG torch Including: TIG torch with accessories Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Including: manual Condition: unused, in the original packaging

Siegmund Set 2, 57-piece, 28mm system, consisting of: 18x quick-release bolts with twist lock short, without O-rings 6x Universal Stop 150 L - Nitrided 6x Universal Stop 225 L - Nitrided 4x Stop and clamping angle 175 L - Nitrided 2x Stop and clamping bracket 300 G left - Nitrided 2x Stop and clamping angle 500 G left - Nitrided 4x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 6x Professional Screw Clamp - Nitrided 4x Professional Screw Clamp 45°/90° - Nitrided 4x Magnetic Bolts Aluminium 1x accessory set (283999) consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample non-stick and burner holder. Condition: never used / new (5)

This inverter model has the latest functions and features to successfully complete welding work. The inverter is user-friendly and efficient and thus a valuable addition to the workshop of the professional welder or solder. The high-frequency ignition on this inverter makes it possible to use the device without having to stroke the electrode during stick welding. The robust handle also gives you more grip during heavy work. In addition, this makes it a lot easier to take the tool with you for working on location. The inverter housing is also extremely strong, so vibrations and even unexpected contact with other devices or components do not have a negative impact on operation or durability.

Special set 96 pieces consisting of: 1x Tool Trolley 30x quick-release bolts with twist lock short, without O-rings 8x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 8x Stop and clamping angle 175 L - cast iron 2x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping bracket 750 G left - Nitrided 1x Stop and clamping bracket 750 G right - Nitrided 1x Stop and clamping angle 500 G left - Nitrided 1x Stop and clamping angle 500 G right - Nitrided 4x Stop and clamping angle 300 G left - Nitrided 8x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 16x Professional Screw Clamp - Nitrided 6x Professional Screw Clamp 45°/90° - Nitrided 4x Universal Stop 300 - Nitrided 1x accessory set consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample Non-stick and burner holder. Condition: n ...

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Pictured accessories are not included! Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, so the table with pallet truck. Table length 2400 mm Table width 1200 mm Table height 850 - 900 mm Machine weight approx. 0.65 t Accessories on the table and pallet truck are not included Condition: never used / new (5)

Basic Set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 quick-clamping bolts 2 pcs universal stop 100mm 6 pcs universal stop 150mm 4 pcs universal stop 225mm 2 pcs universal stop 300mm 2 pcs stop and clamping angle 75mm 4 pcs stop and clamping angle 175mm 4 pcs stop and clamping angle 275mm 2 Prisms 60mm 1 Burner Holder 1 pc. eccentric stop 100mm diameter 1 pc. hole brush 30mm 2 pcs separating lotion 500ml, natural, organic based 2 pcs Welding Table Cleaner 500ml, natural, bio-based Condition: never used / new (5)

Welding table with accessories: - Table size: 2400x1200x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges and holes chamfered 45° - Height of sidewall 200 mm - Holes sidewall in diagonal grid - Construction reinforced by ribs Accessories: - 6x 280610.N Screw clamp - 12x 280511 quick-release bolts - 8x 280420.N Universal Stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set Table length 2400 mm Table width 1200 mm Table height 850 mm Height adjustment 50 mm Machine weight approx. 0.99 t

Set 1 - 33 pieces, 28mm system, consisting of: 12x quick-release bolts with twist lock short, without O-rings 4x Universal Stop 150 L - Nitrided 4x Universal Stop 225 L - Nitrided 2x Stop and Clamping Angle 175 L - Cast Iron 2x Stop and clamping bracket 300 G left - Nitrided 2x Prism Ø60-135° burnished - with collar Complete with shovel and countersunk head 4x Professional Screw Clamp - Nitrided 2x Professional Screw Clamp 45°/90° - Nitrided 1x accessory set consisting of: Eccentric, Allen Wrench, Brush, Whetstone, Sample CleanBasic, Sample non-stick and burner holder. Condition: never used / new (5)

Technical Specifications & Performance Data This automatic shrink wrapper with welding bar is engineered for reliable multi-row collation and high-quality bundling in beverage production and broader industrial packaging environments. Designed for in-line or 90° infeeds, it handles film-only multipacks as well as packs on a flat pad or tray when configured accordingly, making it ideal downstream of filling, capping, labeling, and rinsing stations. Type: Automatic shrink wrapper with welding bar Condition: NEW Output: Up to 25 bundles/minute (format-dependent) Infeed: In-line or 90° multi-row collation conveyor Film: PE shrink film, plain or printed with register mark alignment Packaging styles: Film-only bundles; optional flat pad or tray capability (configuration dependent) Welding bar: Available with multiple bar widths to match bundle size range Electrical: 50 Hz Dimensions (W x  ...

Fronius TransPuls Synergic 2700 CMT welding machine. Professional MIG/MAG installation. Cold Metal Transfer (CMT) version. 3-phase connection. Including cables and base. Coming from a business environment. Auction-ID: A3-43535-11363

The 4 columns work together. Auction-ID: A1-46768-19

Activa Paper Wet Adhesive Tape Machine NK4000 Estimated value of goods: 1200€ Bid only if you have sufficient financial means, a bid is binding. The Euro pallet is not part of the promotion. Auction-ID: A7-46944-242

The 4 columns work together. Auction-ID: A1-46768-20

Universal horizontal milling machine – FRITZ WERNER German-made machine tool renowned for its robustness. Universal horizontal milling machine ideal for surfacing, grooving and tooling work. Heavy cast iron construction for excellent stability. Features: Brand: Fritz Werner Type: Universal horizontal milling machine 3-axis cross-table with rotation Horizontal spindle with cutter holder Prismatic slides Integrated mechanical feed box (gears visible in photo) Siemens motor with 400–500 V power supply Manual handwheel controls Disassembled side cover supplied with the machine Complete machine with levers, handwheels and guards Estimated dimensions: Table: approx. 700 × 250 mm Estimated weight: 900 – 1200 kg Status: Antique but functional machine, ideal for mechanical workshop, restoration, or machine tool collector. Wear consistent with age. Auction-ID: A3-43535-33380

Water-cooled multi-process welding machine Functions: MIG/MAG, TIG & MMA Adjustable amperage: 30-350 amps duty cycle: 60% duty cycle (250 A) Equipped with: LCD color display Equipped with: water cooler for MIG/MAG torch Includes: water-cooled MIG/MAG torch Including: TIG torch with accessories Includes: Electronic gas regulator Connection: 380 volts Technology: IGBT Technology Protection: circuit breaker Including: manual Condition: unused, in the original packaging Auction-ID: A3-43535-578

Consisting of 2x welding station and 1x assembly station, nominal voltage 3x400 V, power 9.18 kW, control voltage 24 V, incl. conveyor technology and enclosure to interfaces Auction-ID: A7-46821-3

Plastic Systems industrial dryer dehumidifier, model DR102HT, designed for drying and dehumidifying plastics in industrial environments. This equipment is particularly suitable for production lines and plastics processing applications requiring precise control of material moisture. Italian manufacturing recognized for its quality and reliability in specialized industrial equipment. Features: Brand: Plastic Systems Model: DR102HT Type: Industrial dryer dehumidifier Serial Number: H116-00 Manufacture: Made in Italy Dimensions: L78 x H160 x W78 cm Condition: Sold as is. Professional equipment that may show traces of use related to its industrial operation. Auction-ID: A1-46647-72