we used for sale

• Incl. hose package • for all further welding data see photographed type plate!

Attention: probably defective!

EWM MIRA 301 MIG KGE Welding machine Manufacturer EWM Model MIRA 301 MIG KGE Condition untested Location 35614 Aßlar DE Lot 53

Incl. 3-jaw chuck, diameter: 120 mm.

Additional technical specifications: • max. negative pressure: 2400 Pa • max. volume flow: 1000 cbm/h

Additional technical specifications: • Number of holes: approx. 1800 • Hole diameter: 16 mm • Accessories: incl. various construction accessories such as clamps

Additional technical specifications: • Secondary short-circuit current: 22.4 kA • Open-circuit voltage: from 1.8 to 3.6 V

Seriennummer: 0000213437

TEKA FILTOO Welding Fume Extraction Unit Manufacturer TEKA Model FILTOO Year 2017 Condition untested Location 73529 Schwäbisch Gmünd DE Lot 13

Consisting of various welding wires, including SG ALMg 3; for thicknesses, weights, manufacturers, and types, see pictures.

Additional technical specifications: • Hole diameter: 30 mm • Distance from hole center to hole center: 100 mm

Auflagefläche: ca. 2330 x 1500 mm

Attention: for all welding technical data see photographed nameplate! Attention: without the gas cylinder seen in the photos

Seriennummer: 978002, Betriebsspannung: 230 V, Frequenz: 50 Hz, Nennstrom: 7 A, Anschluss: 1,1 kW

SOYER BMS-901 Stud welding machine Manufacturer SOYER Model BMS-901 Condition untested Location 35614 Aßlar DE Lot 11

For all further data, see the photographed nameplate.

KEMPER Welding fume extraction unit Manufacturer KEMPER Condition untested Location 35614 Aßlar DE Lot 61

Gas metal arc welding machine, arc welding machine, MIG/MAG welding machine, pulse welding machine, inverter welding machine, impulse welding machine -Manufacturer: Messer Griesheim, MIG/MAG gas-shielded welding machine -Type: Euromag 25-2 -Max. welding power: 250 A -Wire feed: 4-roll drive, separate, mobile -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 970/490/H890 mm -Weight: 168 kg

chucking diameter: 315 mm table load: 300 Kg swivelling range: Grad turning speeds: 0,1 - 4,0 U/min connected load frequency: 220 V bore diameter: 63 mm weight: 0,09 t Dimensions (LxWxH): 0,8 x 0,6 x 1,2 m Welding turntable incl. - 315 mm chuck - 3-axis torch holder - Cutting torch - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Loma CW3 Checkweigher Serial: EQCW-143-DEV-026380 2022, Stainless checkweigher, belt dimensions 2050mm x 180mm, weigh bed 180mm x 200mm, weight range 100g - 1500g, with pneumatic push arm reject into locked reject bin, HMI Touch screen controls, 1Ph

Loma CW3 Checkweigher Serial: EQCW-143-DEV-028420 2022, Stainless checkweigher, belt dimensions 2200mm x 190mm, weigh bed 180mm x 200mm, weight range 100g - 1500g, with pneumatic push arm reject into locked reject bin, HMI Touch screen controls, 1Ph

IDEAL BAS 052 Ref. 38326 Band Saw Blade Welding Machine • 2012 • ID: 38326 IDEAL BAS052 is a band saw blade welding machine with 25 kVA power and operates at 400-440 V. It features UNIOP control. Flash butt welding of band saw blades from a UniOP control: that is the working arrangement on this BAS 052, year of manufacture 2012. The machine was repainted only, so it is presented as it came out of service rather than as a stripped and rebuilt unit. Clamping is hydraulic and annealing runs under pyrometer supervision with the temperature held automatically, which takes the heat treatment out of the operator's hands. Welding ranges Band saw blades for wood: 6-50 mm. Bi-metal bandsaw: 6-50 mm. Control and clamping UniOP process control. Annealing temperature held automatically. Annealing pyrometer. Clamping: pneumatic. Mass and footprint Around 500 kg, standing 14009001500 mm over wi ...

Loma CW3 Checkweigher Serial: EQXCW-143-DEV-026382 2022, Stainless checkweigher, belt dimensions 2080mm x 190mm, weigh bed 180mm x 200mm, weight range 100g - 1500g, with pneumatic push arm reject into locked reject bin, HMI Touch screen controls, 1Ph

Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sou ...

Large basket welding machine, Fabr. ZÜBLIN Machine data of the automatic welding machine: - Inner reinforcement diameter range: 1,465 - 4,100 mm - Diameter of the longitudinal wires: 6-10 mm - Number of longitudinal wires: 12 or 24 - Length of cylindrical reinforcement: any mm - Weight of the entire system: approx. 26.0 t - Foundation dimensions: approx. 14.0 x 11.5 m - Basket in basket production possible, i.e. for large-diameter pipes that have to be manufactured with a double basket from a static point of view - This system can also be used to produce baskets with bells

Travelling base and rails, welding head, controls and flux-handling components A6 Arc Master, LAF 1000, power slides and flux recovery . The column is eccentric, which means that the welding head is always lined up in the centre of the carriage. This to be able to weld round objects with turning rolls on the same rail. The CaB 300S can reach over high and long distances, both vertically and horizontally. The ±180° column rotation facility provides a total action radius. Extension (max mm) 5580

Used dough weigher and long moulder MERAND, type: RheoPan / -In very good condition- RheoPan Precision Dough Weigher with Double Dough Weighing - Very precise and gentle dough processing - Suitable for highly hydrated and fermented, but also for firmer doughs - 50 recipes can be stored - Program setting for easier cleaning Connection with other modules, such as circular knitters, etc. Visits and test runs are possible.

2 pieces dough divider RHEON, type: Twin DIvider 400 VX 202 incl. lifting tipper BMTEC Dough-friendly division from rye dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - 2 pieces of machines + lifting device from BMTEC - Condition: Good, ready to use Visits and test runs are possible by arrangement.

Gedreven Toerental : 60 - 1250 tpm Diameterbereik : 2700 - 6500 mm 4 in stock Max weight on both supports: 25 ton Adjustable in height: yes Number of wheels: 4 Motorpower: 20 kW / 16A Voltage: 3 x 400V Weight: 1290 kg

Media width: 610-3200mm, max. print width: 3200mm, max. borderless print width with Mesh Kit: 3200mm, min. media thickness: 0.2mm, max. roll weight: 100kg, max. roll diameter: 360mm, max. speed in Express mode: 75m²/h, max. speed in Production mode: 38m²/h, max. speed in Standard mode: 30m²/h, max. speed in High Quality mode: 23m²/h, max. speed in High Definition mode: 18m²/h, positive text quality: 4pt, negative text quality: 6pt, required footprint: 7700x3000mm, length: 5960mm, width: 1650mm, height: 1980mm, weight: 3.5t, an on-site inspection is possible.

1. Left device: Cloos GLC 556 (MIG/MAG welding machine) Type / Model: Cloos GLC 556-C (robust industrial device series with separate wire feeder case) Process: MIG/MAG welding power source for professional industrial and workshop use Welding current: Strong power in the upper ampere range (designed for heavy welding work up to approx. 550 A) Mains connection: 3-phase three-phase current (400 V) Construction: Two-part system consisting of a compact power source (on trolley) and an external wire feeder connected by an intermediate hose package Special feature: Often equipped with integrated liquid cooling for the welding torch 2. Right device: Linde MIG 200 (MIG/MAG welding machine) Type / Model: Linde MIG 200 (compact workshop and assembly device) Process: MIG/MAG welding machine (mixed gas / CO2 or suitable for flexible use) Welding current ...

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Year of construction unknown The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be placed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

Fully automatic capsule weighing unit Manufacturer Bosch/Mettler Toledo Type IPK Serial number 0042-08-2006 Year of construction 2006 The IPK is a weighing unit for statistical weighing of capsules. The IPK can only be placed in front of a capsule filling machine of the GKF 400/700/701/1400/2000/2500 series from Bosch. Consisting of: precision scale, automatic feeder and printer.

TRUMPF HL 54 P is a Impuls Schweissanlage, entwickelt für präzise, hochgenaue und zuverlässige Anwendungen. Arbeitskapazitäten nicht angegeben. Leistungsaufnahme 2.5 kW; Anschluss 50 Hz 3x 400 V; Gewicht ca. 220 kg; Abmessungen L600×B1020×H840 mm. Keine spezifischen Zubehörteile aufgeführt. Ermöglicht enge Toleranzen; typische Bereiche: Automotive, Luftfahrt, Uhren, Medizintechnik, Werkzeugmaschinen. Technische Daten ohne Gewähr

TRUMPF TrumaWeld L1000 laser welding system – built in 2004 For sale is a used TRUMPF TrumaWeld L1000 laser welding system for industrial laser processing. The system has a large work table of approx. 2,000 x 1,000 mm and enables flexible positioning of workpieces. It is particularly suitable for precise laser welding work on metallic components. Technical data: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: TrumaWeld L1000 Year of Make: 2004 Serial / Machine Number: A0460A0007 Mains connection: 400 V / 50 Hz Connected load: 11 kVA Control voltage: 24 V DC Required fuse: 3 x 16 A Compressed air connection: 7–10 bar Inert gas connection: argon, 10 bar Work table: approx. 2,000 x 1,000 mm Total dimensions: approx. 2,000 x 1,800 x 2,050 mm The machine is currently in storage and is not connected. An inspection under power or an up-to-date functional test is ...

Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table, welding fixture, circumferential seam welding machine -Manufacturer: Carl Cloos, Welding rotary device type CD 100 SR -Turning length: 1030 mm -Turntable: Ø 500 mm, tiltable -Peak height: 375 mm -Speed: electrically continuously variable 0-3.5 rpm -Control: via foot pedal -Burner stand: manually adjustable -Tailstock: with pneumatically operated quill, 90 mm stroke -Transport dimensions: 2025/800/H1350 mm -Weight: 400 kg

2 x Oerlikon Citoline 3000T welding machines

Stud welding machine, stud welding compact system, stud welding machine, stud welding, stud welding system -Manufacturer: Heinz Soyer, stud welding machine with stud welding gun -Type: BMS-8H -Connection voltage: 230 V / 50/60 Hz -Stud welding gun: PS-3K -Welding area: Bolts and pins from M3 – M8 or Ø 2 – 8 mm -Quantity: 1x stud welding machine available -Dimensions: 350/350/H270 mm -Weight: 15.4 kg

CONTROLS   conventional FEEDSTOCK STEEL STRIP   sheet thickness max.: 3 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 139 mm ROLL FORMING LINE P110K I am providing the list of profiles and tubes that we used to manufacture on the TEGALNIK P110K line! Open cold-rolled steel profiles made from cold-rolled (CR) and hot-rolled (HR) strip: Steel angle profiles (Equal angles): • 15 x 15 x 1.5 mm • 20 x 20 x 1.5 mm • 20 x 20 x 2 mm • 25 x 25 x 3 mm • 30 x 30 x 3 mm Steel U channels: (Width x Height x Thickness) • 10 x 15 x 1.5 mm • 15 x 15 x 1.5 mm • 18 x 20 x 1.5 mm • 20 x 20 x 1.5 mm • 25 x 20 x 2 mm • 25 x 25 x 2 mm • 30 x 20 x 2 mm After modifying the machine, we also manufactured welded stainless steel tubes in the following dimensions using a special process: Round stainless steel tubes: • ø 16 x 1.5 mm • ø 18 x 1.5 mm • ø 20 x 1.5 mm • ø ...

Manufacturer & Model: Manufacturer: Gubisch (Made in West Germany) Model / Type: GN 147 Year of Manufacture (Baujahr): 1972 Machine Serial Number (Masch.Nr.): 1394 Electrical Specifications: Voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Connected Load / Power (Leistungsaufnahme): 33.0 kW Machine Configuration & Features: Type:industrial automatic four-side moulder and planer / multi-spindle profiling machine. Construction: Solid heavy-duty cast iron chassis. Processing Stations: Multi-spindle setup powered by independent electric motors. Infeed System: Extended alignment/infeed table with side guide and roller feed drive system. Controls: Integrated control console with push buttons, selection switches, and emergency stop button. Adjustments: Mechanical handwheels for spindle and guide adjustments. Dust Extraction: Multiple flexible suction hoses connected to top processing stati ...

Battering machine with variable adjustable belt speed., Belt width: 600 mm, Pump: Gedong SCP-10418 flat vane pump, Power: 3 x 380V, 50Hz, 2.45kW, Dimensions: 1800 x 1150 x 1350 mm, Weight: 300 kg

Battering machine with variable adjustable belt speed., Belt width: 600 mm, Pump: Gedong SCP-10418 flat vane pump, Power: 3 x 380V, 50Hz, 2.45kW, Dimensions: 1800 x 1150 x 1350 mm, Weight: 300 kg

table length: 1200 mm table width: 800 mm table height: 200 mm bore: 28 mm weight: 408 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 V / 50 Hz : < 75 dB(A) power capacity: 15 kW volume capacity: 20.000 m³/h weight: 1590 kg Modular plug & play airtower for hall extraction of welding fumes with integrated, soundproofed Fan, automatic, differential pressure controlled Filter cleaning, system control with color display, particle pre-separation and IFA - tested filter cartridges. The system is for a volume flow of average 20,000 m³ / h designed 1st filter stage - main filter: Filter area: 222 m² Number of filters: 6 pieces Dust class according to DIN EN 60335-2-69: M. Degree of separation:> 99.9% Cleaning: Jet - Pulse Compressed air connection: NW 7.2 mm, 4-6 bar, oil and water free 2nd filter stage - fine dust filter. Filter area: 65 m² Filter class according to ISO 16890: ISO ePM1 80% 3rd filter stage - Synthetic fiber mats: Filter area: 8 m² Filter class according to ISO 16890: ISO coarse 60% Total filter are ...

Advanced technological tooling with a dense and symmetrical structure of executive components. Designed for precise positioning and rigid locking of geometrically complex components (e.g. car body sheets) during automated welding or welding processes. The design is characterized by a high degree of repeatability of base points and is fully adapted to be mounted on a welding turntable. LIST OF COMPONENTS: 1. DESTACO pneumatic (knee) clamps – 30 pieces. Heavy actuators responsible for mechanical locking of the workpiece. 2. FESTO compact pneumatic actuators – 14 pieces. They are used to eject positioning pins or auxiliary locks. 3. Pressure position sensors (inductive/magnetic) – approx. 30 pieces. They monitor the opening and closing states of actuators. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete bus system with flexible hos ...

GENERAL CHARACTERISTICS: Stand-alone technological tooling dedicated to a specific operation in an automated production line. It is characterized by a massive, open central frame and unified, heavy clamping units. The device works directly with industrial robots in the thermal hazard zone, having advanced installation protection and a dedicated mass current dissipation system. LIST OF COMPONENTS: 1. DESTACO main welding clamps with opening angle control – 20 pieces. Equipped with a mechanical angle scale (range 5-135°) facilitating collision-free loading. 2. Eye bolts (transport eyelets) – 4 pieces. 3. Copper ground blocks (welding ground) – approx. 2 terminal points. Thick copper connections to protect electronics and positioner bearings from welding current. 4. Electro-pneumatic box (I/O junction box) – 1 piece. A collection enclosure for signals fr ...

Doses product into trays under a weigher, The JASA filling station from 2015 sits under a weigher and catches the weighed portions in a hopper. Two flaps drop the product into the tray below, so you can fill trays of vegetables, fruit or salads neatly and without spillage., The station stands on a mobile stainless frame and has its own control box with on/off and two adjustable fill times. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/jasa-tray-filling-station/, Type: Tray filling station, Filling: Hopper with two flaps, Controls: On/off and two adjustable fill times, Electrical: 230 V, Construction: Stainless frame on castors

Weighing station for the food industry, The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/topcontrol/, Type: Weighing scale / weighing station, Indicator: Top Control colour touchscreen, Construction: Stainless steel frame with weighing platform and product tray

Stainless steel version; Min. Capacity 48 grams; scale 5 grams; resolution 2 grams; Equipped with digital readout Auction-ID: A1-50542-4

Handles the full spectrum of blade types — bi-metal, carbide, wood, and stainless steel — up to 50 mm clamping width, covering blade dimensions from 6×0.40 mm up to 54×1.60 mm on bi-metal stock. At 25 kVA with 38 kN clamping force and 10 kN upsetting force, it delivers consistent, high-integrity welds across carbon and stainless steel strip with max. cross-sections of 150 mm² and 60 mm² respectively. The fully automatic welding and annealing cycle is recipe-controlled via touch panel — operator inserts the blade, hits start, and the machine handles the rest. Robust pneumatic clamping, water-cooled electrodes, and a 800 kg industrial frame make this a workhorse for sawmills, blade service centers, and large metalworking operations. Make and Model iDEAL BAS 320 Nominal output (50% DC) 25 kVA Secondary voltage 2.8 – 5.5 V (6 stages) Control voltage 24 DC Clamping force 38 k ...