we used for sale

Safety relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: SVS11/R-2-24 V -Allow. Operating temp.: -20/+50 °C -Response time: 50 ms -Obstacle size: Ø 50 mm -Fuse: M400 mA -Weight: 2.1 kg

Running bezel of a hamlet E110 The bezel is almost unsubstonible

Weingarten Excenter Press

Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg

Massive aluminium die-cast base Engine S1: 1800W Weight: 23kg HM Circular Saw Blade D: 305mm Idle speed 4200 rpm Swivel -45/+45° extendable back stop Quiet Belt narrow laser stroke marks exactly the cutting line Deep stop G&HM-KAP-305JL

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.

Grease baking device Roka plant Tippfix Model DA 900 -14.4 kW -Outside mass: 80x204cm -Basin indoor mass: 70x194cm

Face plate, face plate chuck, four-jaw chuck, facing chuck -Transfer: in the current condition as seen -Face plate: without jaws -Chuck size: Ø 770 mm -Shot: short taper 11 -Hole circle: Ø 235 mm -Through hole: Ø 120 mm -Groove width: 24 mm -Weight: 234 kg

Weibert Z-400-EL Format circular saw Sliding table 420x3200 mm anodized, cutting length 3500 mm Motorized height adjustment and inclined position saw blade 3 Cutting speeds: 3000/4000/5000 rpm Car. Star/Triangle Switch 7KW 400V 50HZ Vorritz engine 1.3 kW 3 Cutting speeds: 3000/4000/5000 rpm Cutting height at 90° 125 mm, at 45° 90 mm Cutting width between saw blade and parallel stop 1350 mm Laying table (1420 x 650 mm) with miter stop with 2 folding stops G&RO-Z-400-EL

Saw milling Weibert FR3 new â?¢ Format sliding table 2000mm â?¢ Cutting height: 103mm â?¢ Boom table cpl. â?¢ Saw blade: swivel, max.315mm â?¢ 3KW motors (4KW) 400V 50HZ â?¢ Mill: rigid 90° â?¢ Milling rpm: speeds: 1500/3500/6000/8000 rpm. â?¢ Safety railmilling stop 500mm â?¢ Right- and left-hand-running milling â?¢ WJ-400100W7 Accessories: Driving equipment

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet -Width: 560 mm -Depth: 665 mm -Height: 800 mm -Weight: 78 kg

Hydraulic pump, oil pump, gear pump -Max.: 600 rpm -Working pressure: 2 bar -Output: 3 l/min -Number: 1x pumps available -Price: per piece -Dimensions: 95/100/H90 mm -Weight: 2.3 kg

Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion

Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.

Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Wabco Westinghouse, compact cylinders -Stroke travel: 900 mm -Piston: Ø 80 mm -Piston rod: Ø 22 mm/M20x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 1165/95/H95 mm -Weight: 15.2 kg/piece

Wehmoner Membrane Press

Weibert ASA 2803 Aspirator Rated volume flow: 2800m3/h Filter area 3.84 m2 Chip collection volume 240l Suction socket: 203mm Suction nozzle outlet: 3x 100mm Sound pressure level max. 87.5dB (A) Recording power 2.2kW Engine 400V 50Hz LxWxH 1500 x 500 x2100mm Weight 53kg

Robland HX TZ Saw milling Engine: 2x 4 hp, 400V, 50hz Saw blade diameter 250mm Cutting height 85mm to 90° Cutting height 55mm to 45° Sliding table 1450 x 320mm Cutting length 1200mm Cutting width between Saw blade and parallel stop 600mm Miter attack with ezenter tensioner Weight 340kg

Stainless swing top vacuum packer, chamber dimensions 500mm x 430mm x 100mm, seal bars 400mm, timer / temp controls, mobile, 3Ph

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor, overvoltage protection switch -Manufacturer: Weidmüller, surge protection switch -Type: PU 1+1 C Class II -Number: 6 pieces available -Price: per piece -Dimensions: 90/35/H60 mm -Weight: 0.2 kg/piece

MABS1500 Extraction system metal for metal shavings easy filter change large collection container with drawer stable housing Engine: 1500W, 230V or 400V Suction capacity 1500 m3/h Fan wheel diameter: 300mm Suction connection: 100mm Weight 73kg

Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price

Make: WEGER Type: AL 96 Built: 1999 Power: 6700 m3/h Current consumption: 7.65 A 2 pieces Available Price on request Contact details can be found under Contact

Kegelrundwirker W&P CR 59 -Bread dough Rundwirker Werner & Pfleiderer -Model CR 59 -with oiling -With Teflon Kegel -with hot air

Planscheibein little used condition Manufacturer TG Diameter approx.500mm Body bearing traces (can be easily removed!) Through hole, approx. 90 mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Floor cutters, asphalt cutters, concrete cutters -without: saw blade and cable -Saw blade: Ø 360 mm -Cutting depth: 120 mm -Motor: Robin EH25D 8 HP -Dimensions: 1200/500/H950 mm -Weight: 100 kg

Complete 48 MW Westinghouse W251-B11A Gas Turbine with a Brush electric generator, 3000 rpm, 50 HZ, 11.5 KV, may be modified as Dual Fuel GT ied

Laboratory kneader Volume: 1 litre Product-contacted areas: stainless steel VA Vacuum-resistant Temperable Subject to prior sale - Errors possible

Terminal block, terminal block, feed-through terminal block -Type: SAKG 40 -Price: per package -3 packs of 10 pieces each -Weight: 2.3 kg/package

Terminal, series terminal, through terminal -Type: SAKG 46 -1x package: 9 pieces -Weight: 3.4 kg

Cable reel, Cable reel, Power cable reel, Cable reel, Workshop reel, Cable drum, Wall cable drum, Workshop cable drum, Wall reel -Cable reel -Drum: Ø 300/160 mm -Weight: 11 kg

Table saw, aluminum profile saw -2x saw: Wegoma TS 250 -Fixed cutting distance: approx. 450 mm -Saws: individually or simultaneously controllable -with: foot switch -Saw blade: Ø 250 mm -Voltage: 220/380 V -Saw motor: 0.75 kW -Dimensions: 850/790/H1660 mm -Weight: 234 kg

Weibert K350 Format circular saw Format sliding table: 3.2m Engine: 5.5kW 400V 50Hz S1 Speed: 3800- 5200 rpm Saw blade diameter: max. 400mm Electrical height adjustment Electric swivel 0-45° Cutting height 90°: 120 mm Cutting height 45°: 75 mm Cutting width: 1250mm with pre-scratcher D=120 bore 20mm Electrical height adjustment Weight 1100kg

Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Copy router: Wegoma SK6 -Copy router: swiveling -with support rail length: 1910 mm -Motor: 220 V 1.4 kW -Spindle speed: 22000 rpm -Dimensions: 500/460/H1530 mm -Weight: 46.5 kg

Power converter, power supply, power supply unit, switching power supply unit, power supply unit module -Input: 100-240 V AC 50/60 Hz 6.5 A -Output: 24 V DC/20 A -Price: per piece -Number: 11 pieces -Dimensions: 295/125/H50 mm -Weight: 1.7 kg/piece

Weima WL 4 Hackers Weima Single-shaft Shredder NEW Funnel opening with logspacer 600x1050mm Funnel content 0.6m/3 Working width of the rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Knife number 28 pieces Type & size of knives concave / 40 x 40 mm Sieblochung 10 - 100 mm Painting WEIMA Standard RAL 2002 / 7016 Connection value 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg 2nd knife row

Clamping car Braun WES fully hydraulic with auxiliary trolley with tracks

Tool benches, tool cabinets and cassettes directly from the manufacturer

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Unit comes from: grinding machine WERKO SKSt 200 -Motor: VEM type KMR 56 G 4 -Pump: 220/380 V/1360 rpm/0.18 kW -Dimensions: 470/570/H445 mm -Weight: 88 kg

Control board for Werner & Pfleiderer Rototherm Stikkenofen Type: RZK 128

Automatic multi-platform saw with leaf adjustment and part back conveyor Neumann Type: MRF 16/4.000: Technical data: Follow later!

Automatic optimization crosscut saw: Technical data: Follow later!

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

Sensor-actuator distributor, distributor strip -Connection: 15 - 30 V DC -Distributor: 6-way -Weight: 90 g

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist -Traverse for: the transport of different loads -Load capacity: 8000 kg -Dimensions: 4070/230/H770 mm -Own weight: 715 kg

Weipert start hole drilling machine Flexibility and economic Producing micro-bores TECHNICAL DATA: Electrodes: 0.50-3mm Travel X-axis: 250mm Travel Y-axis: 350mm Travel Z-axis (Z1& Z2) 600mm Travel W-axis 300mm Feed X,Y,Z-axis 200mm/min Spindle speed 20-120rpm Aspect ratio 300:1 Table dimensions 436x316mm max. working current 30 A Table electrode 360mm Dielectrium container 25L Power 3.5kW Weight 600 Kg

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Material : Stainless steel Mixed roe with double sheath, heatable / coolable Mixing tool : Z-arms Total volume: 3.75 l. Usable volume: 2.5 ltr. Main drive: 0.81 KW, 1400 / 43 rpm Bucket speeds: rear shovel: 25 rpm front shovel: 43 rpm permissible vapour pressure: 5.88 bar;