we used for sale

Slot weights, commercial weights, test weights PAGUS 500 g brass set 2 pcs. Accuracy: M3 diameter Ø 90 mm Dimension: 90 x 90 x 27 mm

Slot weights, commercial weights, test weights PAGUS 250 g brass set 4 pcs. accuracy: M3 diameter Ø 50 mm Dimension: 50 x 50 x 72 mm

Slotted Weight Support Bar, Commercial Weights, Test Weights PAGUS 500 g Beam Bar + 10 pcs Slotted Weights Brass a 500 g Accuracy: M3 Diameter Ø 90 mm Dimensions: 90 x 90 x 410 mm

Slot weights, commercial weights, test weights PAGUS 100 g brass set 5 pcs. Accuracy: presumably M3 diameter Ø 33 mm Dimensions: 33 x 33 x 68 mm

Slot Weight Carrier Bar, Commercial Weights, Test Weights PAGUS 250 g Beam Bar + 14 pcs Brass Slot Weights a 250 g Accuracy: M3 Diameter Ø 50 mm Dimension: 50 x 50 x 810 mm

Welding cylinder, pneumatic cylinder VBS M13010579 stroke: 130 mm rod diameter: Ø 35 mm New ! Dimensions: 425 x 115 x 48 mm

Slot Weight Beam Bar, Commercial Weights, Test Weights PAGUS 100 g Beam Bar + 20 pcs Brass Slot Weights a 100 g Accuracy: presumably M3 diameter 33 mm Bore of weights: Ø 8 mm Slot of weights: 6 mm Carrier rod: Ø top 6 bottom 7 mm Dimensions: 33 x 33 x 710 mm

Welding cylinder, pneumatic cylinder VBS KN155591 stroke: 100 mm rod diameter: Ø 35 mm New ! Dimensions: 365 x 115 x 48 mm

Welding cylinder, pneumatic cylinder VBS M13010577 stroke: 80 mm rod diameter: Ø 35 mm New ! Dimensions: 325 x 115 x 48 mm

Welding cylinder, pneumatic cylinder VBS M13010407 stroke: 35 mm rod diameter: Ø 35 mm New ! Dimensions: 180 x 115 x 48 mm

Welding cylinder, pneumatic cylinder VBS M13014322 stroke: 35 mm rod diameter: Ø 35 mm New ! Dimensions: 265 x 95 x 70 mm

Welding cylinder, pneumatic cylinder VBS M13014400 stroke: 60 mm rod diameter: Ø 35 mm New ! Dimensions: 315 x 68 x 55 mm

Welding cylinder, pneumatic cylinder SAVAIR SV446-97 9227-0017-0065 stroke: 65 mm rod diameter: Ø 35 mm New ! Dimensions: 315 x 68 x 55 mm

MIG Stainless Steel Welding Wire PAGUS DT 1.4316 AWS 308LSi Diameter: Ø 1.0 mm coil K300 Quantity: 12 kg New ! Dimension: 300 x 300 x 105 mm

Welding rod OERLIKON OE-2,000 5 Ni DIN 8559 ASME Sec.II/C/SFA-5.28 ER80S-NI2 Diameter: Ø 2.4 mm Length: 1000 mm Quantity: 24 kg New ! Dimensions: 1030 x 80 x 60 mm

MIG Aluminum Welding Wire ALCAN MT-AL 4043A ALSi5 3.2245 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm

Inverter and holder for ultrasonic welding machine TELSONIC Ultrasonics SE-26/20-36kHz VK / max 500 W max. converter voltage: 1500 V with holder and pneumatic lowering stroke: 40 mm suitable for S840 and S842 used, tested ! Dimensions: 470 x 80 x 115 mm

MIG Aluminum Welding Wire ALCAN MT-AL 5356 S-ALMg 5 3.3556 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm

MIG Aluminum Welding Wire MTC MT-MIGAL 1450 SG/AlMg 99.5 Ti 3.0805 Diameter: Ø 1.6mm Coil: K300 Quantity: 6kg New ! Dimensions: 300 x 110 x 310 mm

MIG Stainless Steel Welding Wire BÖHLER SAS4-IG Si 1.4576 Diameter: Ø 1.0 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

MIG Aluminum Welding Wire ALCAN MT-AL 5183 S-ALMg 4.5 Mn 3.3548 Diameter: Ø 1.6 mm coil: Ø 300 mm Quantity: 6.5 kg New ! Dimensions: 310 x 110 x 320 mm

MIG Stainless Steel Welding Wire BÖHLER SAS2-IG 1.4551 Diameter: Ø 1.2 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

MIG Stainless Steel Welding Wire BÖHLER SAS4-IG 1.4576 Diameter: Ø 1.6 mm Reel: Ø 300 / 370 mm Quantity: 12 kg New ! Dimension: 370 x 370 x 90 mm

TIG welding machine with water cooling CLOOS GL 250 I-HAT 20 / 250 A 10 / 20 V year of construction 1990 used, tested ! Dimensions: 1200 x 600 x 800 mm

Stainless Steel Welding Wire, MIG Wire Electrode, Solid Wire AVESTA 316LSI/SKRSI DIN 8556 SG X 2 CRNIMO 19 12 W. -No. 1.4430 Diameter: Ø 1.6 mm Coil: Ø 300 mm Quantity: 12 kg New ! Dimensions: 310 x 110 x 300 mm

Welding machine EWM MESSER TIG 350 DC 350 A 400 V Dimensions: 1000 x 520 x 900 mm

Stainless Steel Welding Wire, MAG Wire Electrode AVESTA 316L-SI/SKR-SI DIN 8556 SG X 2 CRNIMO 19 12 W. -No. 1.4430 Diameter: Ø 1.0 mm Coil: K300 Quantity: 15 kg New ! Dimensions: 310 x 110 x 300 mm

MIG / MAG Welding Machine JUPITER MIG 230 230 A 400 V used ! Dimensions: 350 x 1000 x 700 mm

Shielded Welding Wire OERLIKON CARBOFIL 1 R EN 440 - G 46 2 M G3 Si 1 Material: 1.0 5125 Diameter: Ø 1.2 mm Coil: Ø 500 mm Quantity: approx. 185 kg New !' Dimension: 500 x 500 x 320 mm

Cooling Module for Welding Machines, Convection Cooling Module for Water-Cooled Welding Machines KJELLBERG KWE 501 400 V Dimensions: 530 x 335 x 395 mm

Medium Frequency Welding Inverter, Welding Inverter REXROTH / BOSCH PSI 6000 PSI 6100.350 L1 1070081665-219 GK100LS105 1070086966-102 100 A 400 V with control cabinet ! also without cabinet SG266 ! Dimensions: 800 x 450 x 450 mm

Welding converter, DC welding machine, welding transformer ELIN SWA 304 P 7.5 kW 25 - 300 A 220 - 500 V 3AC used ! Dimensions: 1000 x 600 x 840 mm

Medium Frequency Welding Inverter, Welding Inverter REXROTH / BOSCH PSI 6000 PSI 6100.350 L1 1070081665-219 110 A 400...480 V also with cabinet SG265 ! Dimensions: 465 x 315 x 320 mm

Welding Machine VEM, SCHRÖDER Welding Rectifier: RGSa 315.1 Wire Feeder: DVG 400 electronic Year: 1977 / 2001 50 - 315 A 220 / 380 V used, tested ! Dimensions: 800 x 600 x 1400 mm

Welding machine, welding rectifier, jump starter, battery starter, charger VISZEK TIRISZTAR 24 SV built: 1988 charging current: max. 63 A < < br />jump start: max. 400 Abr /> welding current: max 130 A 9 kW 380 V 3AC used, checked! without batteries ! Dimensions: 820 x 520 x 940 mm

welding manipulator, welding turntable, welding table HEINRICHSGLÜCK H50 payload: 5000 kg clamping plate: 1200 x 1200 mm 360° rotatable ca 110° tiltable 380 V used, tested ! Dimensions: 1500 x 2800 x 1700 mm

table load: 150 kg weight of the machine ca.: 250 kg dimensions of the machine ca.: 800 x 700 x 950 mm Exhibit Machine Producer: BENDMAK Type: SRP 015 Load capacity: 150 kg Load center: 100 mm Eccentricity: 100 mm Rotation of the turntable: 360° Strongest inclination: 90° Input Power: 380 V Rotary motor: 0,18 kW tilt motor: 0,25 kW Speed: 1,4 m/min Slew: 30 sek. Table-Ø: 500 mm T-Slots: 5-72 Height in horizontal rotation: 700 mm Dimensions: Height: 950 mm Length: 800 mm Width: 700 mm Weight: ca. 250 kg Earthing: 300 Amp. Additional information: - adjustable speeds - control panel with 5 m cable - digital speed indicator on the control panel for monitoring the rotation - weld grounding mechanism - mechanical angle indicator - engine brake with air cooling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wedge gate valve, shut-off valve MAW DN80 PN10 GG-25 DIN3352 flange Ø 200 mm Sealing surfaces: stainless steel ! New ! without handwheel ! Dimensions: 200 x 180 x 415 mm

Machine type: MIG/MAG welding machine Make MERKLE Type RedMIG 3000 K Appendix No. 132.175 Connection voltage 3 x 400 volts Adjustment range 25 – 280 amps Duty cycle 35% ED at 280 amps 60% ED at 240 amps Current setting 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 4-roller drive DV 26 Fuse 16 Ampere Dimensions L x W x H 940 x 445 x 760 mm Weight 120 kg Age 3 years Condition workshop tested, very good, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Equipped 1 pair of welding gloves 1 Piece Instruction Manual Warranty 24 months from ...

Wedge gate valve, shut-off valve JKO DN80 PN10 GG-25 DIN3352 flange Ø 200 mm Sealing surfaces: stainless steel ! New ! without handwheel ! Dimensions: 200 x 180 x 400 mm

Hot gas welding machine, multi-stage SCHLOMA ZIS-487/2 200 / 400 / 600 W 220 V AC approx. 2.8 m connection cable suitable air supply - see LU235 ! New !' Dimensions: 470 x 200 x 50 mm

2012 BEAM MATIC LM4 Starmatic 1003 AC / DC Submerged arc welding system for sale, second hand. Already dismantled and stored Find more here - / Contact us at -

1994 Hacoba USK S1000 KSER Cone Warping machine Model: USK S1000 KSER YOC 11-1994 Condition: ready for use Working range up to 1800 mm Find more here - / Contact us at -

Welding robot great working condition Find more here - / Contact us at -

2014 KOCEVAR & SONS R-94-K0LQ-320/750-DD160 Find more here - / Contact us at -

Fully automated welding system for steel profiles Steel frame construction EWM type Phoenix Plus Electromotive NC drive integrated as robot axis Combination with welding process possible Flexible set-up via interchangeable inserts for IPE profiles from 80 - 160mm various head end variants possible Programming according to customer order Number of combinations according to customer requirements, e.g. : 5 welding programmes and 3 handling programmes ABB type TSC 2013 integrated in MAG package ABB type 7600 Feeding of the profiles: Accumulating roller chain conveyor with stopper and separating function Accumulating roller chain conveyor with stopper and separating function Roller conveyor - gravity principle Find more here - / Contact us at -

IGM-Welding-Station IGM Robot Designation: Rti 330 Year of construction: 2005 1st welding unit Manufacturer: Fronius Hoist no.: 4,0750,100 Designation: Transpuls Synergie 4000 2nd welding unit Manufacturer: Fronius Hoist no.: : 4,075,097,R Designation: Transpuls Synergie 4000 Extraction system Manufacturer: Füchtenkötter Designation: FKPF 64/4 V Year of construction: 2005 Find more here - / Contact us at -

Ultrasonic welding machine for the production of thermal solar absorbers Dimensions and Material Specifications: - Pipe Diameter Options: 8, 10, 12, or 15 mm - Material Thickness: - Copper Sheet: 0.12 to 0.5 mm - Aluminum Sheet: 0.3 to 0.5 mm - Sheet Width: Up to 200 mm - Programmable Welding Length: 1 mm to 9999 mm or continuous - Overall Height: 1250 mm - Overall Depth / Width: 1100 mm / 900 mm - Table Height: Adjustable to 900 mm - Total Weight: Approximately 150 kg Electrical and Pneumatic Requirements: - Supply Voltage: 230V | 50Hz - Power Consumption: Maximum 3500 VA - Compressed Air Supply: Minimum 300 liters/min at 8 bar, clean and dry Performance and Features: - Mechanical Repeatability: Less than 0.2 mm - CNC Module: B&R with CAN-BUS connection for frequency inverter - Memory: 128 MB CF card for programs - Interfaces: - 1 x RS 232 - 1 x USB - 1 x Ethernet - Control Panel: ...

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - / Contact us at -

2016 HR(RUDHOLZER) Warmnietanlage Plastic welding machine Dedicated equipment for JQ specific process, machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities. Find more here - / Contact us at -