we used for sale

Intermediate conveyor belt / conveyor belt Type LTB 250-3500, S/N 81005, built in 1997 Length 3500 mm Width 250 mm Height 820-1000 mm Feed rate 20 m/min. with slip plate 3000 mm 2x pneum. Glass bead ejector Condition: technically and optically in very good functional condition Delivery: EXW Delivery time: at short notice by arrangement Viewing: by arrangement

Technical data of the pallet rack crossbar: Shelving system: Jungheinrich Type: MPB The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 1007 daffodil yellow Box profile: 160 x 50 mm Truss type: AUF ́B ́E0436 Agraffe: 4 HK (hooks) Clear width: 3,900 mm 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for pickup. A beyond desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Technical data of the pallet rack crossbar: Shelving system: Jungheinrich Type: MPB The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 1007 daffodil yellow Box profile: 160 x 50 mm Truss Type: AUF ́B ́E0436|3.6 Agraffe: 4 HK (hooks) Clear width: 3,600 mm max. load per pair of trusses 4,000 kg, with equal. distributed load. 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for pickup. A beyond desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Display press only - 159h Year of manufacture: 2023 Controls: Delem Da-66T with touch screen Pressing force: 36 t Bending Length: 1300mm Stroke: 150 mm Travel speed: 150 mm/s Working speed: 10 mm/s Return speed: 150 mm/s Installed power: 21 kW Power Supply: 400V/50Hz/3~ Tool clamp pressure: 50 bar Dimensions (L × W × H): 2050 × 2050 × 2310 mm Weight: 4350 kg

1) Retention of the current configuration with extended service life, Increase in uptime through targeted use of wear-resistant special alloys., • Market standard: Most manufacturers produce shafts from ordinary tool steel as well as knives and rake tines from conventional Hardox steel., • Tomcat operation: Our wave housings are made from wear-resistant special steel HP 400/450. Blades, hooks, and rake tines consist of the extremely wear-resistant high-performance alloy Creusabro., • Customer benefit: Extension of service life by 1.5 to 2 times. Clear reduction of shredding costs per ton and significant reduction of expensive shredder downtime., 2) Shafts in configuration Extra-Fine”, Specialized drill head versions to achieve especially fine final grain sizes., • Construction: Execution with an increased number of cutting discs and knives on the shredding shaft., • Result: R ...

A machining center from Schwäbische Werkzeugmaschinen in need of repair is offered. Travels X/Y/Z1/Z2: 400mm/500mm/425mm/425mm, Y tool-change position: 775mm, swivel axis Q: 180°, rotary axes: A + U, number of spindles: 2, spindle distance: 400mm, max. spindle speed: 17500rpm, spindle bearing diameter: 80mm, rapid traverse: 100m/min, max. tool positions: 232, tool interface: HSK-A63, max. tool diameter: 80mm, max. tool length: 300mm, max. tool weight: 10kg, Control: Siemens 840D. Motor of the C1 axis defective, W axis is defective. Replacement required. Machine dimensions X/Y/Z: 4350mm/7000mm/4000mm, weight: 14.5t. Documentation available. Inspection possible by arrangement.

Technical data of the pallet rack crossbar: Shelving system: Jungheinrich Type: MPB The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 1007 daffodil yellow Box profile: 100 x 50 mm Truss type: AUF ́B ́E 0480 Agraffe: 4 HK (hooks) Clear width: 1,800 mm max. load per pair of trusses 2,000 kg, with equal. distributed load. 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for pickup. A beyond desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Technical data of the pallet rack crossbar: Shelving system: Vogelsang NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 2,400 kg, with the same distributed load 02x Locking pins, used Design:sendzimir galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: MPB The scope of delivery includes: 01x Pallet rack crossbar, new Material colour: hot-dip galvanised Box profile: 160 x 50 x 1.75 mm Truss type: AUF ́B ́E0436 Agraffe: 4 HK (hooks) Clear width: 3,700 mm 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

For sale is a Grafix GX 1 N in a neat condition. The machine is ideal for anyone looking for a reliable and powerful device. It has been carefully treated and is ready for further use. Model: Grafix GX 1 N Condition: good / used Function: flawless Paper size 38 x 58 cm . Roller washer is available Ink rollers, printing cylinder and print bed flawless Scope of delivery: see pictures If you are interested or have any questions, please contact us. Viewing or pick-up possible by arrangement.

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR350 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: light blue (rusted) Truss type: TRN1-270-10-l INP profile: 100 x 50 mm Agraffe:5 HK (hook) Clear width: 2,700 mm 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR350 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: light blue (rusted) Truss type: TRN1-270-10-l INP profile: 100 x 50 mm Agraffe:5 HK (hook) Clear width: 2,690 mm 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR350 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss type: TRN1-270-08-l INP profile: 80 x 42 mm Agraffe: 5 HK (hooks) Clear width: 2,700 mm 02x Safety pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

max. turning length: approx. 800 mm, centre height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, Fabr. ELESTA, type: VISULESTAIIE, with multifix steel holder, magnetic chuck, coolant device, splash guard and machine light as well as various machine accessories

Key data: 3130 mm, 1250 mm, 100 mm

WEEKE Venture 108 - CNC machining center - Year of construction 2013 - Availability 11.2026 - Without tools/aggregates - V12 drill head - HSK 63 - PowerControl - Flex-5 interface (C-axis) - Tool changer 8-fold - Good condition

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, new Material colour: RAL 2004 orange Box profile: 100 x 50 x 1.5mm Truss Type: PNB 0480 Weight/piece: 14.25 kg Agraffe: 4 HK (hooks) Clear width: approx. 3,600 mm Max. load per pair of trusses 1,000 kg at the same distributed load 02x Safety pins, new Design: compl. galvanized For securing the longitudinal members against unintentional lifting Note: These are new goods with traces of storage in the form of of dust deposits or the like. One-time special price, due to customer cancellation, subject to sales. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for collection. An additional transport requ ...

Technical data of the pallet rack crossbar: Shelving system: Mecalux The scope of delivery includes: 01x Pallet rack crossbar, new Material colour: RAL 2001 orange Truss Type: TB-S 100 Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Clear width: 1,825 mm Max. load per pair of trusses 2,000 kg, with the same distributed load 02x Integrated locking pin, new For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Belt dewarper Weber ASB 600/2, with ribbon and open use, 2 speeds, for an extra charge, the belt and the pressure wheels can be renewed, Connection 400V, dimensions LxWxH approx. 85x77x125cm, weight approx. 220kg, very good used condition, fully functional

: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our fa ...

turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm turning length: 500 mm spindle bore: 36 mm turning speeds: 30 - 3550 U/min spindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,511,5 m On customer order - Private machine - Accessories: 3-jaw chuck 4-jaw chuck Collet chuck with lever clamping Multifix A + various holders Operating tool Various turning tools Original documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig Unimat 23 E + Uniplan 23 planing line, including a return conveyor. An NC-controlled line for planing and profiling window scantlings, including glazing bead cutting or other planing tasks, with automatic return of the workpieces to the operator. Technical data: Spindles: 4 + 2 Working width: 230 mm Working height: 120 mm Spindle 1: 7.5 kW / 50 mm / 8,000 rpm Spindle 2: 11 kW / 50 mm / 8,000 rpm Spindle 3: Shared motor with spindle 2 / 50 mm / 8,000 rpm Spindle 4: 7.5 kW / 50 mm / 8,000 rpm Spindle 1 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Spindle 2 Uniplan: 5.5 kW / 50 mm / 7,200 rpm Feed rate: 5–24 m/min Control: Nexus PC control NC axes: Unimat 2 & 3, Uniplan 1 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Profimat 23 automatic planing and moulding machine for four-sided planing and profiling of timber, with a mobile spindle. Technical data: Spindles: 5 Spindle 1: Bottom / 5.5 kW / 40 mm Spindle 2: Right / 5.5 kW / 40 mm Spindle 3: Left / shared motor with #2 / 40 mm Spindle 4: Top / 7.5 kW / 40 mm Spindle 5: Bottom / 4 kW / 40 mm Working width: 230 mm Working height: 120 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

greates pass round over bed: 320 mm turning dia. over face-slide: 198 mm centre height: 160 mm turning length: 650 mm spindle turning speed range: max. 3.000 U/min spindle passage: 40 mm tailstock quill taper MT: 3 quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams The data for this ad was created with ModulMWS  ...

- Vertical drilling unit with 16 drilling spindles in the X direction - Vertical drilling unit, with 15 drilling spindles in the Y-direction - Vertical drilling unit, with 13 drilling spindles in the Y-direction (grid 25 mm) - Horizontal drilling unit with 6 drilling spindles - Horizontal drilling unit with 2 drilling spindles. - Main spindle 7.5/10 kW - (S1/ S6 operation HSK F63, incl. liquid circulation cooling with integrated CNC axis rotating 360 degrees incl. torque support. - Automatic tool change magazine for 8 seats (plate changer) - HOMATIC - 2000 IPC with WoodWOP 4.0 programming software - Pillar extension Y-direction 120 mm and K-table 1500 mm - Incl. 2 adapter units, see photos

General SKU343Y850 MakeWerkstatten Nordhorn Serial54 284 TypeW 402b Pressure Working pressure0.5 Bar Working pressure vapour evaporator9.6 Bar Main Features Surface170 m2 Specified Features - Falling film evaporator Falling film evaporatorcheck Number of stages:1 MakeWerkstatten Nordhorn TypeW 402b Mach.No.54284 Year of construction2006 Heating surface170 m2 Number of tubes:276 Tube diameter33 mm Tube length6000 mm Max. temperature140/165°C MaterialStainless steel 1.4571 (316Ti) General Year of construction2006 LocationBarneveld Weight4000 kg CEcheck Extra information Extra SpecificationsHeating surface approx. 170 m2, 276 tubes (MoC 1.4571) dia. 33mm, tube length 6000 mmFine chemicalsOther chemicalFeed additivesSolventsFood additivesLubricants & oleoAnimal feedBeveragesAPIOils & fatFalling film evaporatorsWerkstatten NordhornIndustries > Chemical > Fine ch ...

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack AS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 160 x 50 mm Truss Type: PAB0336 Design: Head crossbeam Agraffe: 3 HK (hook) Clear width: approx. 3,600 mm 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

approx. 10 pieces, labeller incl. printer – used - : Price per piece from location: Lift from above onto the boxes: now only 3.500.-€ instead of 3.950.-€ (net)! Lift from the side to the boxes: now only 2.950.-€ instead of 3.950.-€ (net)! Price for the BJ 2023 device: now only €3,950 instead of €4,950 (net)! Manufacturer: Weber Type: Legi Air 4050EG, and e.g.: 4050E CC (Gen.3- from BJ 2023) Year of Make: 2014 SN: e.g.: 50001222 Incl. column and applicator (partly from the side, partly from above) 5 devices glue the labels to the cardboard from above, 5 devices stick the labels from the side to the box Condition: good Available: from approx. Q4/2026 Location: Frankenberg camp / Saxony

approx. 11 pieces of compact label dispenser for the application of pre-printed labels, Weber, Alpha Compact – used - : Price per piece from location: now only 950.-€ instead of 2.950.-€ (net)! Manufacturer: Weber Type: Alpha Compact Year of Make: 2014 Incl. column and applicator 100 – 240VAC, Condition: good Available: from approx. Q4/2026 Location: Frankenberg camp / Saxony

turning diameter over bed: 280 mm turning dia. over face-slide: 150 mm centre height: 140 mm turning length: 500 mm main drive stepless adjustable: 0 - 6.000 U/min spindle speed: 30 - 5.000 U/min max. workpiece weight between centers: 100 kg quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1430 x 950 x 1550 mm Bed Slide (Z-Axis): - Guide length of the bed slide: 350 mm - Bed width: 205 mm - Slide travel: 500 mm - Max. feed force: 3500 N Flat slide (X-axis): - Slide travel: 150 mm - Slide width: 140 mm - Max. feed force: 2500 N Upper slide (Z-axis): - Slide travel: 100 mm - Slide width: 92 mm - Swivel range of the cross slide: 75 ° The data for this ad was created with ModulMWS - the soft ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic length s ...

Short infeed table (700 mm) with 2 driven feedrollers above and 1 driven feedroller in the infeed table In the machine 4 driven feedrollers Hardened table (with exception of the infeed table) Separate controll cabinet and electrical cabinet Automatic bed lubrication Pneumatic pressures Outfeed table with height adjustment 0/0,5/1 mm Sound enclosure with electromagnetic security Capacity: width 20 - 230 mm x height 8 - 160 mm (with cutting circles resp. 140 and 163 mm) Feedspeed: 6 - 36 m/min, motor 7,5 kW Number of spindles: 8 Spindle diameter: 50 mm Spindle speed: 6000 rpm Bottom 7,5 kW, outboard bearing Fence 7,5 kW Near 11 kW Fence 11 kW Top 15 kW, outboard bearing, straight jointer Bottom 22 kW, table prepared to take wooden inserts in case of ripping (tool diameter up to 250 mm) Top 11 kW, table prepared to take wooden inserts Bottom 11 kW, outboard bearing, straight jointer

Capacity: 230 x 130 mm. Spindles: 7 Bottom 7,5 kW, right 7,5 kW, left 11 kW, right 7,5 kW, top 11 kW, bottom 11 kW, universal 11kW spindles 2, 3, 4 and 5 are 8000 tr/min straight jointer on 2nd bottom spindle Cardan shaft drive Pneumatic pressures Intermediate driven feedroller for short pieces 0,8 m infeed straightening table manual bed lubrication Spindle diameter: 50 mm. 5 driven rollers in table Feed: 6 - 36 m/min, motor 7,5 kW motor height adjustment

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Weinig Unicontrol 6 with NC-controlled spindles ----------------------------------------- The machine was in daily operation until September 2026, at which point it was professionally dismantled and placed into storage at our facility. Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) Pos. 1: Cross-cut saw ---------------------------- > Electronic cross-cut saw, horizontally infinitely adjustable > Number of tools: 1 > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for identifying the cut line > NC-controlled length stop, mounted on the tenoning table, positioning of the cross-cut saw is integrated into the control system. > Length 3500 mm Item 2: Tenoning and slotting ...

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW– Fence / Near 11 kW – Top 7,5 kW – Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included

Capacity: 230 x 130 mm. Number of shafts: 9 Bottom 7.5 kW, right 7.5 kW, left 7.5 kW, right 7.5 kW, left 7.5 kW , top 7.5 kW, bottom 7.5 kW, top 7.5 kW, bottom 7.5 kW Kardan drive Pneumatic pushers Front surface table Feed rollers for short workpieces Manually operated pump for bed lubrication Shaft diameter: 50 mm. Powered rollers in the table Feed: 6 - 36 m/min Motorized height adjustment

Process: horizontal drilling - injecting glue - driving dowels 1 drilling and doweling unit, freely programmable Workpiece dimensions: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/ max: 10 / 60 mm Z-axis manually adjustable Drilling depth manually adjustable Center stop pneumatically lowerable 4 vertical pushers Double diaphragm pump 1:1 Dowels: 8 mm x 30 mm, 8 mm x 35 mm Control: Powercontrol PC85T with Woodwop software

horizontal boring - glue injection - dowel inserting Single drill and inserter which can be freely programmed Drilling depth manually adjustable Z-axis with manual setting Workpiece sizes: Length min/max: 20 / 1250 mm Width min/max: 50 / 800 mm Thickness min/max: 10 / 60 mm max. workpiecewidth with middle fence on 2 fields: 600 mm, on 1 field: 1200 mm Middle fence with pneumatic rise/fall 6 vertical pressure units Double membrane glue pump 1:1 Glue viscosity 350 mPas Dowels: 8 mm x 30 mm, 8 mm x 35 mm Controlls: Powercontrol PC85 with Woodwop software

X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90°, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360° C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90° groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented prog ...

Meat grinder K+G Wetter EW D114, Machine completely in stainless steel, with cutting set, operating instructions, year of construction 2007, Connection 400V, 5.5kW, dimensions LxWxH approx. 93x68x112cm, weight approx. 320kg, Very good used condition, fully functional

Offered are two Weingarten single-column eccentric presses. 1) Weingarten AR 125 single-column eccentric press, delivered: 1970, pressing force: 125t, max. sheet thickness: 13mm, stroke rate: 44/66strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. 2) Weingarten AR 125 single-column eccentric press, delivered: 1974, pressing force: 125t, stroke rate: 42/62strokes/min, ram stroke: 20-120mm, ram adjustment: 100mm. Inspection possible by arrangement.

Cooling unit (chiller) - GWK Weco 24.4 wb / Like new Description: Cooling capacity 35 kW Refrigerant R134a The device has: - Compressor - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 1 The device after maintenance, fully functional 3-month operation warranty in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

A complete extrusion line is available, equipment: 5x control cabinets, 1x frequency inverter for the main drive, 1x frequency inverter for ZSB/heating, 1x PLC control system, 1x feeder, 1x vibrating screen with Congrav, 2x pre-feeders from Brabender, 2x gravimetric feeders from Brabender, 1x volumetric feeder from Brabender, 1x Coperion ZSK 58 Mc twin-screw extruder, 1x ZS-B 58, 1x frequency inverter cabinet, 1x SL cabinet with Siemens S7-300 control system, 1x local control cabinet at the machine with integrated EPC NT operator terminal with LM3 from Brabender, 1x cooling unit, 1x complete strand pelletizing system, 1x classifying screen with extraction system, 1x pair of spare screw shafts with screw elements, material 15, unused, total weight of the system: 5.843t, with documentation. An on-site inspection is possible.

Number of spindles: 4 St. Number of tools: variabel St. Spindle diameter: 50 mm Spindle length: 320,320,320,160 mm WEINIG UNIVAR 12 NC AUTOMATIC PROFILING AND MILLING MACHINE ----------------------------------------- Machine can still be seen in operation! Includes mechanization/handling equipment. For milling the perimeter of windows, doors, and similar items with non-uniform (varying) profiles. For profiling individual components. PROCESSING UNITS ----------------------------------------- 1. Profiling Spindle ----------------------------------------- Motor power: 11 kW (15 hp) Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool clamping length: 320 mm Number of tool positions: variable, infinitely adjustable via NC Radial and axial adjustment: NC-controlled axes Synchronous feed device with automatic plunge function 2. Profiling Spindle ----------------------------------------- Motor  ...

Key data: 400 t, 120 1/min

Müller Weingarten Punching Machines Type. HQR 400.25 with Schuler conveyor system.

Key data: 250 t, 200 mm, 60 1/min

WEINGARTEN DE 250 Punching machines with conveyor system for sale. Table 2,000 mm x 1,200 mm

x-axis: 3000 mm y-axis: 2000 mm z-axis: 1100 mm distance between columns: 3800 mm spindle motor: 18 / 23 kW spindle turning speed range: 18000 U/min rapid traverse: - m/min table-size: 2800 x 2000 mm workpiece weight: 7,5 t/m² Control: Heidenain TNC 640 workpiece width - max.: 3650 mm A-Axis: +/- 115 / 0,001 ° c-axis: 360 / 0,001 ° total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Machine equipped with: - 5-axis machining centre - Heidenhain 640 iTNC CNC control (15.1” LCD) with Kinematics Opt. function - 24-position tool changer (HSK A63) - (German) Cytec S8 A/C milling head (18,000 rpm, 56/72 Nm, integrated) - Linear guides with rollers for the X/YU/Z axes - Heidenhain linear scales for the X/YU/Z axes - Coolant supply through the spindle, 20 bar - Air blow-off device on the spindle - Blum TC-60 workpiece measuring system - Blum NT-A3  ...

centre height: 280 mm centre distance: 1000 mm turning diameter over bed: 570 mm turning diameter over slide rest: 340 mm turning length: 1000 mm spindle head: A8 DIN55027 spindle diameter: 120 mm spindle bore: 83 mm torque: 1600 Nm turning speed range: 1-2500 (2 Stufen) U/min worktool system: Multifix C face stroke: 340 mm rapid power traverse in X-and Z direction: 5 / 10 m/min feed Z / X: 0,001 - 20 m / U feeding dorce: 10000 / 7000 N tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock quill taper ISO: MK 5 total power requirement: 15 kW Weight: 3550 Kg dimensions of the machine ca.: 3,85 x 2,30 x 1,80 m WEILER D3 Control Unit (SIN810D), Three-Jaw Chuck Multifix C Steel Holder, Chip Conveyor, Various Interchangeable Jaws MULTIFIX C Quick-Change Steel Holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Serviced Continuous Butter Making Machine (CBM) equipped with a new Rittal control panel with simple and user-friendly controls. Stainless Steel frame execution. The machine is designed for the continuous production of sweet butter from cultured and / or sweet cream and is suitable for hygienic dairy processing applications. The CBM has a butter production capacity of approximately 1.500 kg per hour and is designed for an input of approximately 3.000 litres of cultered or / and sweet cream per hour (38/42% fat, pH of 4,5/4,8 and infeed temperature ± 10 - 13 °C). Completely electrically driven; Churning cylinder / Beater I: 22 kW, Churning cylinder II: 2,2 kW and Squeezer / Working section: 5,5 kW., The machine is equipped with a new Rittal electrical control panel, incorporating simple and clearly arranged controls for the main machine functions. The control panel includes:, - 3 x Danf ...

DMN Westighouse, type AL 200 SD, inlet and outlet 200 mm, housing and rotor in full stainless steel 1.4408 - Flange connection DIN PN 10, rotor volume 10.5 litres, direct drive SEW 0.55 KW, output speed 20 rpm

Key data: 140 °C, 6 kW, 45 W

Type WTD-6, make Weinreich, year 2011 Heating capacity 6 kW, cooling capacity 45 kW at 90°C