we used for sale

Tol measurements: . 0 weight max.: . t range L-W-H: . mm Tool trolley with contents: 1 set of SK50 chucks High-speed spindle Spindle for internal cooling Cutter heads The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Follow-up time 149 sec The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 570 mm turning length: 2000 mm control: Siemens Sinumeric steady: chip conveyor: turning dia. in gap: 600 mm turning diameter over slide: 340 mm spindle bore: 63 mm Tool changer: total power requirement: 22 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5x1,5x1,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad ...

Rexroth 0 821 302 401 / Bosch 0 821 301 400 Wegeventil The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rexroth 0 821 302 401 Wegeventil The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 x available The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rexroth 0 821 300 363 / 0 821 300 930 / 0 821 300 931 / 0 821 300 917 / 0 821 300 917 / 0 821 303 536 Directional valve The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 600 mm turning diameter over slide rest: 360 mm turning length: 2250 mm spindle bore: 63 mm faceplate: 500 mm turning speeds: 11,2-2000 U/min bed width: 350 mm 3-jaw chuck: 300 mm steady: 160 mm Rapid travel: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team Th ...

turning diameter over bed: 950 mm turning diameter over slide rest: 569 mm turning length: 2200 mm spindle bore: 90 mm faceplate: 800 mm steady: 500 bed width: 580 mm Rapid travel: turning speeds: 800 U/min digital readout: stepless reg. with elect. turning speeds: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 No. 19276 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on ...

turning diameter: 720 mm turning length: 3000 mm control: Siemens 805 turning diameter over slide: 430 mm turning speeds: 1800 U/min tailstock quill taper MT: 6 steady: 3 Stück main drive motor: 36 kW z-axis: 3050 mm x-axis: 410 mm swing diameter over slide rest: 430 mm spindle motor: 28 kW workpiece weight: 3000 kg spindle passage: 106 mm 3-jaw-chuck diameter: 305 mm chip conveyor: faceplate: mm total power requirement: . kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4x2,4x2 m Steady rest 1: Diameter: 120-300 mm Steady rest 2: Diameter: 220-400 mm Steady rest 3: Diameter: 350-500 mm Chuck: Diameter: 315 mm Maximum workpiece weight: 3 t (with steady rest) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines  ...

There are 22 WEG electric motors available: 1x WEG IE3-IP23-B3-V, 1x WEG IE3-IP55-B35-FF500-V, 2x WEG IE3-IP23-B35-FF600-F, 3x WEG IE3-IP23-B35-FF400-F, rated power: 37kW, 1 WEG IE3-IP23-B3-F, rated power: 75kW, 2 WEG IE3-IP23-B35-FF600-F, 1 WEG IE3-IP23-B35-FF600-F, 1x WEG IE3-IP23-B35-FF500-V, rated power: 47kW, 5x WEG IE3-IP23-B35-FF600-V, rated power: 113kW, 1x WEG IE3-IP23-B3-V, rated power: 113kW, 1x WEG IE3-IP23-B3-V, rated power: 91kW, 1x WEG IE3-IP23-B3-V, rated power: 136kW, 1x WEG IE3-IP23-B3-V, rated power: 245kW, 1x WEG, rated power: 132kW. An on-site inspection is possible.

Roka Werk Kippfix TW-36E Fat Baking Machine with Accessories - Manufacturer: Roka factory - Model: Kippfix TW-36E - Fat baking device for donuts and donuts - made of stainless steel - Digital control with temperature and baking time display - With standby function at 140°C - With turning device - With tipping zone incl. drip tray - with 2 baskets - Hourly output approx. 360 pieces Technical data: - Power 7.2 kW - 3/ 400 V - 50 Hz

A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible.

Split nut, for die casting machine, TR370x12, 924399, Frech/Müller Weingarten, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Split nut, Tr370x12, 560x560x435mm high. 700kg Nut for automatic SZ F./PI. GDK/3800/4100 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D370, D330, D300

Bactofuge (Bacterial removing separator). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, baseframe with feet, manometer on in / outlet, control panel (upgraded by Centrimax with Siemens S7 PLC and CE labelling) and several service tools for maintenance. It was working till the end of the production of the former dairy., Additional features:, Excluding:, - Water valves., - Sludge tank / cyclone., - Counter pressure valve., Type of Machine: Bacterial-Removing Centrifuge (Bactofuge), Capacity: 25.000 liter per hour, Bowl speed: 4.700 rpm, Motor: 37 kW

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (11 kW), base plate, feet, control panel, water valves, inlet and outlet pipes and service tools for maintenance., Additional features:, Excluding:, - Motor cover., Type of Machine: Cream Separator / Skimmer, Capacity: 5.000 - 7.000 liter per hour, Bowl speed: 6.520 rpm, Motor: 11 kW - 380 V - 50 Hz - 1460 rpm, Weight: ± 1.300 kg

Multiweigh 10 heads Multihead weigher., Stunning multihead weighers from Multiweigh. They are in a very good condition ready for production., - Large stainless steel buckets, - Ridigized, - 10 heads with in-feed ring, - Collection gate, More photos and full specifications: stcfoodsolutions.nl/en/machine/multiweigh-hdw-10-multihead-weigher-10- weigh-hoppers/

Yamato ADW 514 multihead weigher, MHW : Yamato Sigma 514SV, Ingress Protection: :IP65, Weighing capacity : 20 - 2000 grams per dump, Weighing volume : max. 5 liter per dump, Configuration Details:, Machine completely built in 304 Stainless steel., TC : 15 degrees, vibratory type, LFP’s : Sigma Type, Feed Buckets : Double door opening, Bucket volume : > 2,5 liter, Weigh Buckets : Double door opening, Bucket volume : > 2.5 liter, Collating chutes : 60 degrees, HMI : RCU810 color touch screen, The model comes with a newer upgraded RCU (control panel)., MHW: Yamato Sigma 514SV, HMI: RCU810 color touch screen, Bucket volume: > 2.5 liter

Mettler Toledo weigh price labelling line, More info soon, dimensions in the photo album

Weiler DZ 40, Year of manufacture 2008, Control Siemens 840 D, Travel X/Z 200/350 mm, Turning diameter 180 mm, Bobmkney Ev Iujrzedf Circulation Ø max. 560 mm, Y axis +/- 25 mm, Q axle / programmable tailstock, Q axis travel 360 mm, Q axis measuring system rotative, Tailstock MK 4, Main spindle max. rod passage 42 mm, Spindle bore 52 mm, Rapid traverse X/Z/Q 30/30/20 m/min, Turret 16 speed - all stations driven, VDI 25, Shaft diameter 25 mm, Requested. Tools up to 4,500 rpm, Parts tray, accessories, Requested. Tool holders, rigid holders,

Key data: 7 , 170 mm, 140 mm

Four-sided planer Weinig Type: U 17 A Year of Make: 1979 Planing width 170 mm Planing height 140 mm Dressing table 1960 mm long 7 Waves: 1. Bottom 4kw 2. Right 3 kW 3. Left 4 kW 4. Right 4 kW 5. Top 5.5kw 6. Bottom 4kw 7. Universal 4 kW Feed speed max. 18.5 m/min. with manual Waxilit pump well-functioning condition

Make WEDECO Type ME 450 Capacity 35 cbm/h Consisting of: UV Reactor, Stainless Steel Housing Material 1.4301 Reactor chamber material: pure quartz Volume 25.0 l Flange connection DN 100, 1.4571, DIN 2576 Empty weight approx. 140 kg, dimensions: 380 mm width x 2215 mm high x 415 mm depth Water temperature 5 °C – 60 °C, operating pressure 10 bar, pressure loss approx. 0.01 bar Protection class IP 65 UV lamps Hg Low Pressure Spectrothermal Emitters Power 160 watts, quantity 10 pieces UV sensor Accuracy +- 10% Control cabinet

USED TETRA PAK A1 TWA 180ML ULTRA WEDGE FILLING LINE FOR SALE YEAR 2019 Item #: Usm-250 Category Tetra Pak A1 A1 TWA 180ml Ultra wedge filling line, year of manufacturing 2019, version 1000v, speed 10000 packs per hour. with straw applicator ,Packer, conveyors and paper trolly.

Machine type: Wolf (meat mincer) K+G WETTER – 114 mm Manufactured in Germany Equipment: The machine comes with a complete toolkit Dimensions: 950 mm x 700 mm x 1200 mm Condition: Complete factory renovation by MM SERVICE LTD

Manufactured in Germany. Power 9.5 KW. Productivity per hour between 1.5 to 2 tons. The machine is fully factory refurbished and comes with a 1-year full warranty, including the full range of cutting tools. Delivery, installation, samples and training at the price Two augers – Large Feeding Auger for large pieces of meat and Working auger. Two speeds on each of the screws. The machine is ready for commissioning.

Meat grinder (Wolf) K+G WETTER 114 mm – manufacturer Germany; Power 5.5 KW, 400V; Dimensions 950 mm × 550 mm × 1450 mm; The machine comes with a complete factory refurbishment; 1 year warranty included in the price; Complete with all tools; The price includes delivery, installation, samples and training;

Shredders, shredders, shredders, shredders Fabr Weima Type WL 4 Built in 1996 Motor 18.5 kw

Cutter K+G Wetter – 90 liters, set with emptying device Power supply: 400 V, 3 phases, 50 Hz Power: 34 kW Current: 70 A Material: -stainless steel Volume: 90 liters Dimensions: 1300 mm x 1900 mm x 1650 mm The machine is available after it has been completely factory refurbished and with a 1-year warranty. The price includes delivery, installation, samples and training.

Key data: 38 liter, 25 liter

Werner & Pfleiderer Mixer Model GK12 Rotor type Tangential Total chamber volume 38 L Unable volume. 25 L Complete with motor Electrical control panel Chamber dims: 40x40x40cm = 0,064m3 Rubber used: EPDM, Natural EPDM, NR BR.

General SKU291Y500 MakeWestfalia TypeKO 8006 No.1641680 LocationBarneveld Main Features MaterialStainless steel Capacity3000 Ltr./Hr. Motor7.5 KW Specified Features - Separator Separatorchamber separator Capacity± 1500 - 3000 l/h Suitable forLiquid clarification — separating a solid phase from a liquid phase Motor± 7,5 - 8 kW (380V (Ex)) Max. rotor speed6500 rpm Inletø 35 mm Liquid outletø 25 mm Solids outletø 50 mm MaterialStainless steel 1.4404 (316L) General Floorspace1,2 x 0,7 m Total height1,1 m Weight500 kgGeneric medicinesBiotechnologyFeed additivesCosmeticsFood additivesLubricants & oleoDairySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIOils & fatSeparatorsWestfaliaIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndustries > Chemical > CosmeticsIndustries > ...

General SKU291Y506 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor7.5 KW Rotor140 mm Specified Features - Inline mixer Rotor sizesDia. 140x18 mm and dia. 90x20 mm InletDia. 50 mm OutletDia. 35 mm Number of stages:4 and 1 Motor7,5 kw, (400 V, 3230 rpm)- 2,2 kw, (400 V, 3420 rpm)- 2,2kW, (400 V, 900 rpm.) Rotor speed3230 rpm. and 3420 rpm. MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) General MakeYtron Process Serial0103201 TypePID PAJAM Year of construction2001 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,3x0,9 m Total height1,4 m Weight500 kg Extra information specifications impellerpump: motor: 2,2 kW, (400 V, 900 rpm.) 11m³/h at 1 bar. material AISI 316 The YTRON-PID Principle, Powder-Inject-Dispersing, The thickener or gelling agent is sucked, out of a hopper, BigBag or a silo i ...

Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max.  ...

General SKU291Y507 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor7.5 KW Rotor140 mm Specified Features - Inline mixer Rotor sizesDia. 140x18 mm and dia. 90x20 mm InletDia. 50 mm OutletDia. 35 mm Number of stages:4 and 1 Motor7,5 kw, (400 V, 2920 rpm)- 2,2 kw, (400 V, 2850 rpm)- 2,2kW, (400 V, 900 rpm.) Rotor speed2920rpm. and 2850 rpm. MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) General MakeYtron Process Serial02121140 TypePID PAJAM Year of construction2003 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,3x0,9 m Total height1,4 m Weight500 kg Extra information specifications impellerpump: motor: 2,2 kW, (400 V, 900 rpm.) 11m³/h at 1 bar. material AISI 316The YTRON-PID Principle, Powder-Inject-Dispersing, The thickener or gelling agent is sucked, out of a hopper, BigBag or a silo in ...

Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...

A 3D CNC coordinate measuring machine in need of repair is offered for sale. Max. measuring range X/Y/Z: 400mm/400mm/300mm, measuring principle: hybrid (optical/tactile), optical system: CCD camera with motorized zoom optics, focusing method: contrast autofocus, max. accuracy: 1.5µm (MPE), guideways: mechanical precision guideways, base structure: granite construction, control: CNC in all 3 axes, software: WinWerth®. The Z-axis no longer moves. An on-site inspection is possible.

max. workpiece length: 4500,6000 mm profile spindle: 4 Stück main drive: 30 kW Weinig Conturex C226 Machining Center ---------------------------------------------- For sale on behalf of a client, includes software (Klaes) and tooling (Oertli) for IV68/IV78/IV92 and Wood/Alu 68–92 systems. Machine still is electrically connected. Technical specifications and window cross-sections available upon request! ---------------------------------------- Price of the above-mentioned machine available upon request! ---------------------------------------- Dismantling and reinstallation available upon request! (Technical specifications provided by the manufacturer – subject to change/no liability assumed!) All prices are net, plus statutory VAT. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI 40 DIN 69880 number: 22 Stück A range of tool holders in good condition. Tool holder size: VDI 40, DIN 69880 Were used on a Gildemeister CTX 500 E CNC lathe. Quantity: 1 driven tool holder, angled design. 18 driven tool holders, straight design. 3 standard tool holders. Only sold in a package! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 1250 mm z-travel: 1600 mm B-axis (table): 360.000 x 0,001° deg milling-head swivable +/-: (HV) 360.000° deg pallet size:: 1000 x 800 mm table load: 3000 kg tool taper: SK 50-B Plananlage 125 spindle turning speed range: max. 8000 U/min transmission ratio: 2 spindle drive: (100/40 % ED) 37/50 kW feeds x/y/z -stepless: 30000 mm/min max. torque on the spindle: 1410/2000 (100/40 % ED) Nm total power requirement: 100 kVA weight of the machine ca.: t dimensions of the machine ca.: 11555 x 7998 x 5050 mm Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-posit ...

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - ...

pressure: 80.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 250 mm table width: 85.0 / 135 mm stroke: ca. 390 mm dayligth: ca. 585 mm ajustment speed: 180 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec work height max.: 1050 mm Number of working hours: 32.495 h oil volume: 200 l operating pressure: 320 bar total power requirement: 11.6 KW weight of the machine ca.: 7300 kg range L-W-H: 3700 x 2000 x 3000 mm Good/well-maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=IKyUmzB0WTI ------------------------------------------------- CNC electro-hydraulic press brake with: Increased installation height .. approx. 550 mm Increased cylinder stroke .. approx. 390 mm ------------------------------------------------- Features: - Robust electro-hydraulic press brake MADE IN GERMANY () - CYBELEC CNC control  ...

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, w ...

turning length: 500 mm turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm spindle bore: 36.0 mm tool adaptor: DIN 55022 Gr. 5 quill:: 3 MK quill travel: 90.0 mm turning speeds: 30 - 3550 U/min motor speeds:: 1410 / 2830 U/min total power requirement: 3.3 kW voltage: 380 V weight of the machine ca.: 620 kg. range L-W-H: 1420 x 700 x 1200 mm from a vocational school - very good condition () regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip spla ...

machine measurements: -- mm machine weight: 1.500 kg power capacity: 30 kW Condition: used, Specification: shredder/Shredding plant with two shredders type: WLK 6 S / 30 V-rotor Weima low and slow speed rotor, and second shredder make: AMIS complete plant ready for operation, incl. hopper with lid and platform. Special accessories: - automatic star-delta start-up - gear motor with transport screw - lid with limit switch - quick-change sieve - Hopper can be lifted manually - Equipment for underfloor installation consisting of hopper elevation, guard rail, external emergency stop WLK version with sound insulation, sound-insulated lid and front door Technical data: - Hopper volume: 0.9 m³ - Operating voltage: 3x 400 V - Motor power main drive: 30 kW, 1,500 rpm - Motor power hydraulics: 1.5 / 2.0 kW, 1,500/3,000 rpm - Weight approx.: 1,500 kg ...

diameter: div. number: 36x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 56x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: div. number: 16x tool adaptor: SK 50 Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t stroke: 810 mm throat: 360 mm table-size: 900 x 630 mm dimension of ram: 750 x 450 mm dayligth: 800 mm diameter of pistons: 400/360 mm ram stroke speed: 200 mm/sec total power requirement: 17 kW weight of the machine ca.: 7 t Press force: 160 t Stroke: 810 mm Throat depth: 360 mm Table size: 900 × 630 mm Ram clamping surface: 750 × 450 mm Installation height (daylight): 800 mm Main cylinder diameter: 400 / 360 mm Ram speed: 200 mm/s Total power requirement: 17 kW Machine weight: approx. 7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.