we used for sale

General SKU204U042 MakeWerner &: pfleiderer TypeZSK 70F175E Mach.No.231783 Year of construction1996 ( gearbox 2017) Sizes Screw diameter70 mm Main Features Motor108 KW L/D23 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter70 mm L/D23 Co-rotatingcheck Water coolingcheck AC-motor108kW, 330Volt, 1500rpm With variable speed drivefrequency controller Screw speed198 rpm Exchangeable segments( not included) MaterialNichrome 2.4869 General LocationBarneveld With switchgearcheck Sizes switchgear1,25x0,7x2,15 m Floorspace4,6x2 m Total height1,7 m Weight6400 kg Extra Specificationsinlet: 142x130 mm- there are 2 screw shafts present- no screw segments present- no extruder head presentPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCata ...

General SKU032U183 MakeSuperior B.V. TypeSZV 800/5/6 No.8671 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Surface0.3 m2 Size length580 mm Sizes width480 mm Specified Features - Vibro sieve Vibro sieveSorting and dewatering sieve Sieve surface0,28 m² Number of sieve decks:4 Sieve sizes580 x 480mm With covercheck Inletø 100mm Outlet5x ø 75 mm + water outlet Drive vibro motorcheck Motor2x 0,4 kW, 220/380 V, 980 rpm Sieve perforation7,0mm, 6,0mm, 5,0 mm, 4,0 mm MaterialStainless steel General Mounted on mild steel framecheck Floor space1,3x1,0 m Total height1,2 m Weight400 KGPowdered foodsGeneric medicinesStarchOther chemicalRubberPlastic & polymersFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicConsumer wasteVibro sievesSup ...

General SKU054F306 MakeWerner &: Pfleiderer Stuttgart TypeUK-80 K4UH No.163 258 / 483 188 Year of construction1979 LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume80 Ltr. Specified Features - Z-blade mixer Z-blade mixer(1x) Capacity170 Ltr, Useful capacity 80 Ltr Trough sizes515x525x600mm With covercheck With jacketcheck Max. temperature350 Degr. C. Double geared(hydraulic driven, power pack is missing) With adjustable packing glandscheck Hydraulic tiltingcheck With hydraulic unitcheck Motor2,0 KW, 220/380 Volt MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Mounted on foundationcheck Floorspace2,8x1,2 M Total height1,9 M Weight2450 KG Extra information - With additional set masticator armsPowdered foodsStarchOther chemicalGreen FridayRubberPl ...

General SKU201P079 MakePfaudler-Werke AG (DE) TypeT800 No.204401 Year of construction1971 LocationBarneveld Pressure Working pressure1.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialMild steel Volume898 Ltr. Motor1.5 KW Specified Features - Mild Steel Reactor Reactorcheck Capacity898 l Vessel sizesdia.1100 mm x 1000 mm Dished bottomcheck Dished top sidecheck Top connectionsdia.200mm, dia.80mm, (3x)dia.70mm Outletdia.50mm With jacketcheck Max. temperature200°C With propellor stirrercheck Motor1,5 kW (380 V, 1450 rpm (Ex)) Speed mixing shaft86 rpm With jacketcheck Mild Steel Reactors MaterialMild steel General Floorspace1.4 x 1.2 m Total height2,6 m Weight1400 kg Extra information Not glassed Other chemicalRubberPlastic & polymersCatalysts & fillersPaper & otherSolventsDetergent & surf.OrganicsE-waste & metalLubricants &  ...

General SKU074S263 MakeSeitz Wega TypeEFT 30.52 Mach.No.13449 Year of construction1982 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Motor0.75 KW Surface0.1 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface0,07 m2 Capacity55 l Plate sizesDia. 300mm Vessel can be tiltedcheck With jacketcheck With stirrercheck Motor0,6/0,75 kW(380 V, 1450 rpm (Ex)) With variable speed drivecheck Stirrer speed5-25/10-50 Rpm Stirrer can be liftedcheck MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Mounted on framecheck LocationBarneveld Floorspace1,9 x 1,3 m Total height2,7 m Weight850 kgPowdered foodsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalGreen FridayBiotechnologyAgrochemicalsCatalysts & fillersFeed additiv ...

General SKU186K643 MakeWerner und Pfleiderer TypeLDUK 6 - IInS No.111045 Year of construction1962 Mounted on framecheck Pressure Working pressure10 Bar Main Features MaterialMild steel Volume18 Ltr. Motor7.5 KW Specified Features - Z-blade mixer Double screw cont. kneadercheck Jacketcheck With variable speed drivecheck Inlet30 x 195 mm Arm speed21,6-97,2/28,2-127 Rpm Arms can be cooled/heatedcheck Capacity18 l (usefull 8 l) Double shaft kneader:dispersion kneader: Masticator-armscheck Single gearedcheck With adjustable packing glandscheck With covercheck With hydraulic tiltingcheck Motor7,5 kW (400 V) With jacketcheck Z-blade mixers MaterialMild steel General LocationBarneveld With switchcheck Floorspace1,8 x 1,4 m Total height2 m Weight2500 kg Extra information Pneumatic tilting. With top ram (pneumatic) Fine chemicalsOther chemicalGreen FridayRubb ...

General SKU007C015 MakeSeitz-Werke GmbH Bad Kreuznach TypeEFT 60/180 CW Mach.No.13861 Year of construction1982 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Motor5.2 KW Surface0.3 m2 Specified Features - Nutsche filter Nutsche filter/dryercheck Filter surface0,3 m2 Capacity180 l Vessel sizesdia. 570x750mm Plate sizesdia. 620mm Vessel can be tiltedcheck Solids outletdia. 150mm (side outlet) With jacket(20 l + bottom 3,5 l) Max. temperature-10/+150 Degr. C. With stirrercheck Motor3,0/5,2 kW (380 V, 1450 rpm (Ex)) Stirrer can be liftedcheck MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Mounted on framecheck LocationBarneveld With switchgear(as is) Floorspace1,8 x 1,8 m Total height3,5 m Weight1900 kg ATEX designedcheckPowdered foodsGeneric medicinesOintmentsFine ch ...

Universal Tool Milling Machine Fritz Werner Type 5130 Extremely robust and precise universal tool milling machine from the traditional German quality manufacturer Fritz Werner (model 5130) This conventional bracket milling machine impresses with its solid grey cast iron design and maximum reliability. It is ideal for workshops, toolmaking, repair shops, demanding do-it-yourselfers or training institutions. The machine has a swivelling vertical milling head with manual quill feed (perfect for additional drilling work) as well as a mechanical feed gear. An absolute highlight is the retrofitted premium safety spindle protection from Tecno Più Technical data at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Type: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with tightening rod) Table d ...

A completely overhauled Kleemann large-format screening plant for the mining and recycling industry is available. Screening decks: 2, screen width: 1800mm, screen length: 5200mm, screening area per deck: 9.36m², total screening area: 18.72m². Overhaul: springs, base frame, cardan shaft, tensioning devices and electric motor. An on-site inspection is possible.

This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine.

A poultry cone cutting line from Westerhoff Geflügeltechnik GmbH is available. Number of operators: 10, cutting cones: 40, max. throughput capacity: 1000pcs/h, length: approx. 11000mm, width: approx. 2000mm. Including a platform for the operators. An on-site inspection is possible.

PETECH WEW5050 pillar drill is designed for precise drilling of holes with a maximum diameter of 50 mm. Machining is performed by means of a work head with a reliable spindle. The work table with adjustable height and rotation around the column allows for convenient positioning of the workpiece and adjustment of the working position. The workspace is illuminated by a lamp mounted on the body of the PETECH WEW5050 machine. Technical specifications of the PETECH WEW5050 column drill press - maximum drilling diameter: 50 mm - workspace illumination

turning diameter: - mm turning length: - mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PRO The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss Type: PT150M Box profile: 150 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 3,200 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

This 3-axis HOMAG WEEKE OPTIMAT BHX 055 was manufactured in 2018. It features a workpiece length capacity of 200 - 3,050 mm and a workpiece width of 70 - 850 mm. The machine includes 13 vertical drilling spindles and 4 horizontal drilling spindles, providing versatile machining capabilities. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG WEEKE OPTIMAT BHX 055 machine we have for sale. Contact us for further details.

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PRO The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss Type: PT150M Box profile: 150 x 50 mm Agraffe: 5 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 4,250 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Hamlet of Commodor B -GS - Identifier -3 - Axis digital display "NEW" - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection -2x Emergency / Off -Swarf back wall -Coolant device - Work light - Multifix with inserts -Documentation

Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Guillotine Shears WEIKA 3200x10mm -Exhibition Machine / Unused -Cutting length 3200mm -Max. cutting thickness - steel 10mm Hjbkn Auowatxgj S Tjl - Max. cutting thickness - stainless steel 6mm -Max. cutting thickness - aluminum 12mm -Electric digital backgauge -Footswitch -Light barrier / Right -Left -Front support with ball rollers -Drive power 11KW Dimensions: LxWxH 4x2x1.9 meters / Weight 8000Kg

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

WEILER COMMODOR L&Z Spindle Lathe -Turning length 1000mm -Turning diameter max. 160mm Bar Passage 56mm -Speed range 25-2000 rpm -Automatic longitudinal/plane feeds - Thread: Metric/Inch/etc. -Tailstock Mk4 Hjbkn Au Ssun Ulhs Tsl -Three-jaw chuck approx. 250mm -Multifix base holder with insert -Coolant device -Electric lining protection -Swarf back wall -Machine documentation -Good operational condition Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Key data: 410 mm, 800 mm

TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant

A double-sided trolley cooling system Werner & Pfleiderer for bread production is available. Refrigerant: R404A, refrigerant type: HFC, minimum temperature: -25°C, design temperature low pressure/high pressure: -45°C/50°C, design pressure low pressure/high pressure: 16bar/28bar, internal dimensions X/Y/Z: 1800mm/1200mm/1900mm. Machine dimensions X/Y/Z: approx. 2750mm/2200mm/3150mm. Baguette target temperature/cooling time: -20°C/28min, bread roll target temperature/cooling time: -20°C/14min, pretzel target temperature: -14°C. Documentation available. An on-site inspection is possible.

Manufacturer: Pee-Wee Model: UPW 24 Type: Thread Rolling Machine Year of Manufacture: 2009 Weight: 2400 kg Rated Voltage: 400 V Control Voltage: 24 V Frequency: 3 Ph / 50 Hz Rated Power: 12 kW Rated Current: 32 A Fuse: 32 A Compliance: CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

A Weier generator is available. Power: 1650kW, Voltage: 690V, Speed: 1575rpm, Design: B3, Current: 1517A, Power factor: 0.91, Insulation class: H, Lubricant quantity: 88cm³, Lubrication interval: 3600h, Weight: approx. 5900kg. The generator originates from an RCC plant, however without control or regulation electronics. The generator was completely overhauled, including rewinding and ceramic bearings. An on-site inspection is possible.

Internal grinding machine: grinding diameter: 300 mm grinding depth: 300 mm Travel distance - Z1: 470 mm Travel distance - X1: 200 mm Tilt angle - B2: 1/1000 ° power capacity: 3,5 kW External and face grinding unit (Z2/X2): Travel distance - Z2: 470 mm Travel distance - X2: 325 mm Drive power – External grinding spindles: 16,5 kW : 120 mm grinding diameter - cylindrical: 400 mm sanding belt length: 400 mm grinding wheel size: Ø 500 x 50 x Ø 127 mm Workpiece spindle unit: Travel distance - U: 470 mm Tilt angle – B1 with longitudinal adjustment: -1/+12 ° Tilt angle - B1 with workpiece spindle unit: -20/+30 ° Manual longitudinal adjustment of the workpiece sp: 470 mm Drive power – workpiece spindle: 3,8 kW turning speeds: 1-895 U/min Load capacity - Spindle head: 200 kg Centre height above the swing bridge: 200 mm total power requirement: 47 kW weight of the machine ca.: 10 t  ...

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV W 50/50), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ032, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 642, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and only a few service tools for maintenance, holding tube with slope, booster pump (APV Puma 2-2 1/2) s ...

The roughing and copying steels are provided with fine adjustments. Template adjustment can be adjusted from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feeds for turning highly profiled workpieces. Drive motor 400V/3kW with electric motor brake Two speed levels can be adjusted via belt belts, within the stages it is possible to work continuously via frequency converter. Speed level 1: 200 - 2000 rpm Speed level 2: 350 - 3400 rpm Center width approx. 1550mm Copy length with bezel approx. 1350mm Bed length approx. 2100mm Feed infinitely adjustable, rapid decline with safety limit shutdown Hydraulic copy carriage with V-lathe steel Spindle with M33 thread and MK3 inner cone Tailstock MK3 and with quick-release device Lots of accessories: Ring bezel with pre-turning steel and insertion aid Four-ja ...

x-travel: 800 mm y-travel: 700 mm z-travel: 700 mm Control: Wenzel max. workpiece weight: 300 kg accuracy: Renishaw SP 25 M Measurement inaccuray: 2,6 µm repeatability: 1,6 µm Longitudinal uncertainness: MPE: 3,5 + L/300 µm (standard) Longitudinal uncertainness: MPE: 3,5 + L/300 µm (extended) 0: 15 - 30 °C 0: 18 - 22 °C (standard) 0: 18 - 28 °C (extended) speed: Joystick 0 - 20 | 0 - 100 mm/s speed: CNC axis related 300 mm/s speed: CNC vectorial 520 mm/s Accelaration: CNC axis related 700 mm/s² Accelaration: CNC vectorial 1200 mm/s² total power requirement: - kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 3,38 x 2,2 x 3,0 m Documents: elektr. hand wheel: PC: Intel Core i7, 16 GB RAM Measuring Machine WENZEL - SF 87 - Renishaw FCR25-L6 Stand Alone Changer with 6 Storage Positions - Renishaw PH 10 M Probe - Wenzel WPC 2040 Path Control System - WM | Quartis M ...

Coordinate measuring machine for sale: The Video Check is built in 2004, has Windows XP with WinWerth V 7.32. The measuring range is 1000x650x600 A Renishaw PH10M is installed The device has 2 Z quills (1x zoom/1x button or laser) To be included in the package: - Bracket changer - Laserline - Pushbutton/probe - Screw compressor - Air pressure vessels - Documentation The device is in storage.

Used double conical kneader WP, type: DK 150 -In bakery condition- - for max. 150 kg flour or 240 kg dough - Incl. 3 tank cars Visits and test runs are possible.

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), main panel and control panel with GEA Operator Panel, all inlet/outlet pipes with pumps, manual counter pressure valve, manometer and service tools for maintenance including pressing tool., Additional Features:, Machine has several repairwork to be arranged by the new owner:, - Small corrosion on the bowl bottom part., - Upper bowl part has small dents., - Weldings inside the hood., - Topdisc has welded cracks., Type of Machine: Cream Separator / Skimmer, Capacity: 30.000 liter per hour, Bowl speed: 4.850 rpm, Motor: 37 kW - 400 V - 50 Hz - 1.470 rpm - 57 A , Production hours: 40.164 hours, Weight: 2.150 kg, Dimensions: 205 x 111 x 180 cm

Description Weber – Bluhm label printing & dispensing system Leg i-Air 4050E-30-RH-2E542-RO90_312-CC from 07/2018 Basic system Legi-Air 40508-CC on K-tripod spindle Rol+Tel Gr2 incl. – vacuum shut-off – digital l/O interface – compressed air monitoring and shutdown – sensor label on stamp – label end of roll warning – 2-stage vacuum – U-arm – terminal terminal – multilingual text display – label large roll unwinding up to 450m running length – design: right / right hand – Pressure module: Zebra 2E500 # 4#-200 dpi – Applicator: rotating stroke 90" – 312mm arm length -RO90_312

Key data: 570 mm, 2000 mm, 2500 1/min

The WEILER E50HD x 2000 is a robust, cycle-controlled precision lathe for single part and small batch production. It offers a centre width of 2,000 mm, a rotation diameter over bed of 570 mm, a speed range of 1–2,500 rpm and a 20 kW main drive with high torque up to 1,300 Nm. The machine is designed for demanding turning operations and combines manual work with convenient WEILER cycle control and an easily accessible working area.

General SKU015E073 MakeSeitz Werke GmbH Bad Kreuznach TypeVacubloc Drehfilter Year of construction1982 LocationBarneveld Main Features MaterialStainless steel Motor0.18 KW Surface6 m2 Specified Features - Rotating vacuum filter Rotating vacuum filter(1x) Filter surface6,0 m2 Drum sizesdia. 900x2050mm Motor0,18 KW, 220/380 Volt With variable speed drive, Trough without stirrer With knife dischargecheck Manual operatedcheck With vacuum pumpmake SIHI, type LPHE-40516 Motor5,5 KW, 380 Volt With vacuum vesselcheck With liquid pumpmake Netzsch, type NU-50 Motor1,3/1,8 KW, 380 Volt MaterialStainless steel 1.4301 (304) General With switchgear(as is) Floorspace3,9x1,7 M Total height1,8 M Weight1400 KGPowdered foodsStarchGreen FridayBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountRotating vacuum filtersFood additivesSugarAnima ...

General SKU081B448 MakeSeitz Enzinger Noll AG TypeVacubloc Drehfilter Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor15 KW Surface8 m2 Specified Features - Rotating vacuum filter Rotating vacuum filtercheck Filter surface8,0 m² Drum sizesdia. 1200x2120mm Motor0,75 KW, 220/380 Volt With variable speed drivecheck With knife dischargecheck With vacuum pumpmake SIHI, type LEHA-450 Motor15,0 KW, 380/660 Volt With vacuum vesselcheck With liquid pumpcheck Suitable for pre-coatcheck MaterialStainless steel 1.4301 (304) General With switchgear(as is) Floorspace4,1x1,9 m Total height2,6 m Weight2100 kgPowdered foodsStarchGreen FridayBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountRotating vacuum filtersFood additivesSugarAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsMinerals &  ...

This 4-axis Burkhardt-Weber MC100 was manufactured in 1998. It features a working range with an X-axis travel of 3,000 mm, Y-axis travel of 2,500 mm, and Z-axis travel of 1,500 mm. The machine has a maximum table load capacity of 20,000 kg and a spindle speed of 3,500 RPM. If you are looking to get high-quality milling capabilities, consider the Burkhardt-Weber MC100 horizontal machining centre we have for sale. Contact us for further details.

Key data: 22 KW, 2960 1/min

Electric motor, Flanged motor, 22 kW, 2,960 rpm, 400V, 180M-02, Premium W22, Weg, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, - Please note: A stainless steel fan impeller is fitted to the motor; we will include this free of charge, or, if you prefer, we will remove it before dispatch. - We are offering an exceptional special price; a comparable new engine costs around €2,100 excluding VAT or €2,500 including VAT. - The engine is fitted with thermal protection - Engine weight: 182 kg 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of a ...

Used decanter centrifuge from GEA Westfalia type UCD 305-00-32. Year of manufacture 2020. Control included. Centrifuge after technical inspection, ready for operation.

Design: drop through rotary valve, top connection: round flange, drive: SEW gear motor, with pneumatic air purge shaft sealing unit, filter regulator, pressure gauge, and hose connections, suitable for plastics, food products, pet food, animal feed, pharmaceuticals, infant formula, chemicals, biomass, aquaculture, dairy products, cosmetics, paints and coatings, minerals, recycling, batteries, and tires. Inspection on site is possible. The machine is not under power.

Inv. Num. : 9295 Type: XO 87 Producer: Wenzel Created: 2007 Parameters: Axis X: 1500 mm Axis Y: 800 mm Axis Z: 700 mm

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), main panel and control panel with GEA Operator Panel, all inlet/outlet pipes with pumps and service tools for maintenance including pressing tool., Additional features:, - Damage to the sliding piston rim., - Repair work needed on the pump., - Upper bowl part has small dents., Type of Machine: Cream Separator / Skimmer, Capacity: 30.000 liter per hour, Bowl speed: 4.850 rpm, Motor: 37 kW - 400 V - 50 Hz - 1.470 rpm - 67 A , Weight: 2.150 kg, Dimensions: 205 x 115 x 180 cm

This 3-axis WEMO 16-5 eDesign gantry robot was manufactured in 2019. It features a maximum X-axis stroke of 800 mm, a Y-axis stroke of 1,800 mm, and a Z-axis stroke of 4,550 mm, with a maximum handling weight of 13 kg. Designed for injection molding automation and part handling, consider the opportunity to buy this WEMO 16-5 eDesign gantry robot. Contact us for further details.

Westfalia Separator, last used in a fruit juice plant. The separators control system was modernized by GEA. The product is clarified in the centrifuge bowls and conveyed further under pressure. Solids collect in the solids chamber and are periodically discharged automatically. During CIP cleaning, the cleaning fluid is pumped in a circuit., Additional title: Disc centrifuge, Intake capacity: 22000 l/h flow rate for fruit juice approx. 4,000 l/h, Drum velocity: 6500 rpm, Density liquid phase: 1 kg/dm³ , Density solid phase: 1.4 kg/dm³, Power: 18.5 kW, Current: 37 A, Voltage: 380 V, Frequency: 50 Hz, Length: 1485 mm, Width: 850 mm, Height: 1470 mm, Weight: 1200 kg, Material: Stainless steel surfaces that come into contact with the product, Position: on a 685 x 585 mm foundation, Features: Drum, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, dra ...

Newtec H3013MD 13-Lane Linear Weigher with Elevating Belt – Double PCS (2013), The Newtec H3013MD is a high-capacity 13-lane linear weigher featuring an integrated elevating belt and a Triple PCS (Portion Collection System). This dual collection system enables significantly higher throughput by collecting and discharging two weighed portions simultaneously, making it an excellent solution for high-speed fresh produce packing lines., Designed specifically for products such as potatoes, onions, carrots, tomatoes, citrus fruits and other fresh produce, the H3013MD combines accurate weighing with gentle product handling and exceptional reliability. The hygienic stainless steel construction and proven Newtec technology make it a popular choice for demanding packing operations., Technical Specifications, - Manufacturer: Newtec, - Model: H3013MD, - Type: 13-lane linear weigher with elevating  ...

Combination Kieselguhr and Sheet filter. Stationary sheet filter with square filter elements in vertical row arrangement. Hydraulic filter layer compression. Control of hydraulics from built-in electrical panel., Additional title: Kieselguhr and sheet filters as a combination design; years of construction 1979, Capacity approx.: 380 hl/h Combination filter - filtration area approx. 76 - 108 m² KG; 180 - 253 m² Sheet with beer filtration, Operating pressure: 8 bar , Power: 6 kW, Voltage: 220/380 V, Frequency: 50 Hz, Length: 10100 mm, Width: 1320 mm, Height: 1750 mm, Formats: square filter elements, Operation / Control: built-in control panel, Material: Stainless steel, Position: Horizontal, Base construction: Frame, Features: Filter plates; Filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump, Layer patterns: vertical row arrangement

plate filter, 60 x 60 cm with 142 plates, manual pressing., Number of plates: 142, Length: 3,6 m, Width: 0,8 m, Height: 1 m, Weight: 2000 kg