141,127 used machines on RESALE, but how to find them? Machine Search
Hydr. Scissor lift table WEIDMANN type E5/13-1Fabr. No. 30403339 Year of construction 1982 / 2007Load capacity 500 kgPlatform size 2000 x 1200 mmStroke max. 1280 mmOverall height - table bottom 290 mmOverall height - table top max. 1570 mmTable height with safety support 1430 mmLifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 barEngine power 1.5 kWNex connection 400 volts, 50 Hz.- Rotary switch switch on the hydraulic power unit for up and down lowering speed
Radial drilling machine WEBO type R4bRFabr. No. 15 / E195 Year of construction approx. 1965Drilling capacity 40 mmThroat: approx. 1250 mmSpindle holder: MK 4Spindle speed: 30 - 1325 rpm. 9 stepsFeed from 0.12 - 2 mm/rev. 9 steps; used
L + Z Lathe WEWAG Model 250 / 1500Fabr. No. 20953 Year of construction approx. 1975Center width 1500 mmNominal turning diameter over bed 500 mmTurning diameter over bed max. 510 mmCenter height over bed 255 mmTurning diameter over support 300 mmCenter height over support 150 mmSpindle bore 56 mmSpindle speed 18 - 1800 rpm. 24 stepsRotary chuck mount short taper DIN 55022Tailstock inner taper MK 5Drive power 4 kW and 6.7 kW pole-switchable- 3-jaw lathe chuck BISON, 250 mm-
Single-column eccentric press WEINGARTEN type E 40Masch. No. 643/62 Year of construction 1963Pressure capacity 40 ton. Projection 250 mmTable opening 150 x 80 and 200 mmTable area 560 x 460 mmPlunger area 250 x 200 mmPlunger stroke adjustable 8-88 mmPlunger adjustment 63 mmInstallation height 320 mmPin hole 40 mmStroke rate 100/130 strokes / min. Motor power 2.2 / 3 kWNetz connection 400 volts, 50 HzTable height above floor 840 mm- Clutch-brake combination by WEINGARTEN friction threaded coupling with TDC
1 used WEINMANN Gebertisch, built in 2022, as good as new, For now.. without control, as this remains in the overall production control. Control is about 6000 euros new from Weinmann. Size 12 x 3 m - Model BuildteQ A 570.. Sale as seen from site without warranty, dismantling is helped with overhead crane and forklift free of charge without warranty.
Technical data of the steel girder: Manufacturer: Dexion Type: P90 The scope of delivery includes: 01x Steel beams, used Material colour: sendzimir galvanised Box profile: approx. 147 x 50 mm Clear width: approx. 4,060 mm Headstock dimensions: approx. 192 x 50 mm Weight|pcs.: 33,34 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Technical data of the pallet rack crossbar: Shelving system: META Thyssen The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: orange Truss type: HS 140|15 Box profile: 140 x 50 mm Agraffe: 4 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 3,300 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.
Technical data of the pallet rack crossbar: Shelving system: Bito Type: PRO The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss Type: PT150S Box profile: 150 x 50 mm Agraffe: 5 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 4,000 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Lead and pull spindle lathe WEIPERT Year of Make: 1956 Spindle bore: 90 mm Center width: 3000 mm Circulation Ø over bed : 800 mm Circulation 0 over slide: 610 mm Circulation 0 in offset: 1120 mm Speed range: 7.5 – 475 rpm With the following accessories: Multifix tool holder with 11 inserts Coolant Setup Three-jaw chuck 0315 mm Three-jaw chuck 0 400 mm Three-jaw chuck 0 500 mm Face Plate 0 400 mm Face Plate 0 800 mm Face Plate 0 1000 mm Running Lynette Various turning tools (30 pcs. indexable insert tools) 2 moving centering tips 1 drill chuck Operating instructions
Approx. 170 tool holders, some with tools
Manufacturer: WEEKE Model: OPTIMAT BHT 500 Year of Manufacture: 2009 Technical Specifications: - Voltage: 400 V - Frequency: 50/60 Hz - Phases: 3 + N (three-phase with neutral) - Power Consumption: 45 kW - Current Rating: 100 A - Control Voltage: 24 V Find more here - .ucymachines/ Contact us at - sales@ucymachines
Grinder with mixer Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg
Table clamping surface: 600 x 300 mm Coordinate travel: X 350 Y 250 mm W-axis adjustment range (motor): 200 mm servo-controlled EDM axis Z: 340 mm Holes with electrodes from Ø 0.2 to 4 mm Max. workpiece weight: 300 kg Connected load: 3.5 kVA Machine weight: 700 kg
Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Travel X/Y/Z: 600mm/750mm/500mm, max. length measurement error: 3 + L/350, max. single-point error: 3, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
pressure: 1000 t distance between columns: 5000 mm stroke: 500 mm Height of centres: 400 mm Motor output: kW reus: U/min Overall size: 6000 x 2500 mm Weight: 1000 kg Distance between centres: 3500 mm total power requirement: kW weight of the machine ca.: 220 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Technical data of the pallet rack crossbar: Shelving system: Dexion (Hovik) Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: white I-profile: 100 x 50 mm Agraffe: 5 HK Clear width: 1,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Technical data of the pallet rack crossbar: Shelving system: Dexion (Hovik) Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material color: white I-profile: 100 x 50 mm Agraffe: 5 HK Clear width: 950 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Travel X/Y/Z: 4000mm/1800mm/2500mm, max. length measurement error: 55 + L/35, max. single-point error: 35, control: WPC 2040. Includes test head PH10M Plus, PHC10-3, sensor TP20, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible.
Separator GEA Westfalia Type: MSE 100-06-177 Properties: Manufacturer: GEA Westfalia Type MSE 100-06-177 Machines No. 1731-518 Year of construction 2012 Engine power 37 kW Total height 2150 mm Width 1600 mm Length 2000 mm Description: The separator is a cleaning separator to remove solids from milk/juice, etc. No cream separator that separates skim milk and cream! Part 1/3 - Separator Dimensions: Width: 1,600 mm Length: 2,000 mm Height: 2,150 mm Part 2/3 Control cabinet Dimensions: Width: 800 mm Depth: 400 mm Height: 2,100 mm Part 3/3 Tools
Two-way crossover, Folding box, Two-way flap, Raw folding box used Manufacturer: WEGEN GmbH Type: EP 150/2Fl. DN150 Stainless steel pneumatic Trouser section ROWEFLEX EPDM 4502 Drive: GTK63 180° Shut-off valve: Shut-off valve Drain in 2 hoppers (with additional inflow openings) with three ATEX turbine vibrators each JOLLIER NCT 4E Ex II2GD85°C (T6) as well as one on each of the outlet hoses (approx. 2 m) Dimensions without hoses approx.: 1200 x 700 x 1100 mm
Weibert BS 750E profi Log band saw The log band saw is designed exclusively for sawing soft, hard, dry, wet and frozen materials, tree trunks or prismatic workpieces. Their length depends on the design of the machine. The material is placed on the supports of the rail track and fastened. The sawing unit is fed manually. Max. trunk diameter 750 mm Max. width of the boards 730 mm Max. cutting length 3,700 mm (3.7 meters), expandable! Min. cutting length 900 mm (0.9 meters) Saw blade stroke min./max. = 20/540 mm Max. cutting depth 220 mm Wheel diameter/width = 400/25 mm Motor power 7.5 kW (5.5 kW S1/100%) Motor power height adjustment 0.12 kW Saw blade length 3,600 mm Saw blade speed 15 m/s Total length of the basic version 4,600 mm (4.6 metres) Weight approx. 450 kg Optional for an extra charge: Extension section 2.3m Aspirator Lathe rod
Height=1.39 m, Overall length= 1.13 m, Overall width= 1.18 m, Net weight= 470 kg,
Height=1.51 m, Overall length= 0.57 m, Overall width= 0.67 m, Net weight= 91 kg,
Height=1.6 m, Overall length= 0.4 m, Overall width= 0.99 m, Net weight= 451 kg,
Height=1.68 m, Overall length= 2.27 m, Overall width= 1.48 m, Net weight= 936 kg,
Height=2.08 m, Overall length= 0.84 m, Overall width= 4.74 m, Net weight= 900 kg,
Height=1.62 m, Overall length= 0.8 m, Overall width= 0.6 m, Net weight= 220 kg,
Height=1 m, Overall length= 0.9 m, Overall width= 1.15 m, Net weight= 325 kg,
Height=1.3 m, Overall length= 1.1 m, Overall width= 1.6 m, Net weight= 1195 kg,
Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Pallet rack crossbar, used Material color: green Box profile: 155 x 55 mm Agraffe: 4 hooks Clear width: 3,610 mm 02x Locking pin, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 80 x 50 mm Truss type: BX 80|50|13 Agraffe: 5 HK Clear width: 1,800 mm 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.
Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: mm Feed motor: 2,2 kW Feed speed: 5 - 22 , Stufenlos m/min. total power requirement: 17 kw Dimensions (L/W/H): 3.310 x 1.740 x 1.700 mm weight of the machine ca.: kg spindle diameter: 40 mm turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hacker Weima WL 4 Single Shaft Shredder NEW MACHINE The WL 4 single-shaft shredder is a proven classic for shredding waste and residues of all kinds. For example, it is used thousands of times in woodworking companies worldwide. The high number of these shredders, which are in high demand, ensures proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely high durability (even outdoors). Weima Single Shaft Shredder NEW Hopper opening with logspacer 600x1050mm Hopper capacity 0.6m/3 Working width of rotor 600mm Diameter of rotor 252mm Drive power 18.5 kW Rotor speed 80-120 rpm Number of knives 28 pieces Type and size of the knives concave / 40 x 40 mm Screen perforation 10 - 100 mm Paintwork WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5 % / 50 Hz Weight approx. 1, ...
Height=1.2 m, Overall length= 0.96 m, Overall width= 1.07 m, Net weight= 50 kg,
WE sharp 7000, sharpening station for slicer knives, demo machine from exhibition
Weiss Climate Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless Steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 litres Outer housing Material: double-coated zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paintwork: light grey (RAL 9002) Door, double-leafed: hinged left and right Equipment: Feed-through in floor and ceiling: 2 pieces each, NW 100 mm, for inserting the pulsating tables Feed-through in the side walls: 1 piece each, left, right, 100 mm Refrigeration unit: air-cooled Control: Digital measurement and control system DMR Basic control panel: integrated in the main switch panel Interface: RS 232 C, for connection to a PC Software: Opera ...
maximum number of results exceeded
please refine your search
