127,838 used machines on RESALE, but how to find them? Machine Search
Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg
Electrode diameter 0.5 to 3mm Travels 300x400x350mm CE certification proves the best possible safety Complete series in above-ground construction Electrodes Ø 0.5-3mm Travel X-axis 300mm Travel Y-axis 400mm Travel Z-axis 350mm Travel W-axis 300mm Speed C-axis 30-60mm/min Rapid traverse Z-axis 120mm/min Aspect ratio 300:1 Table dimensions 320x440mm max. working current 30A
Turning diameter 410mm Turning length of 1000mm CE certification proves the best possible safety Complete series in above-ground construction Speed up to 3000rpm Center width 1000mm Turning Ø over bed 410mm Turning Ø over support 255mm Hbcfxifg Turn Ø in Bridge ----- Speed/Steps 50-3000 rpm / Stepless Tailstock mount MK 4 Feed longitudinal 0.025-085mm/rev Feed transverse 0.05-1.7mm/rev Motor 5.5KW
Workspace Workpiece, weight (max.) 270 kg Distance spindle nose - table surface 580 mm Table dimensions 635 mm x 305 mm Dimensions magnetic clamping plate 600 mm x 300 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel X-axis travel 765 mm Y-axis travel 340 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 2.9 m x 2.2 m x 1.9 m Weight 2800 kg
Workspace Workpiece, weight (max.) 500 kg Table dimensions 813 mm x 406 mm Distance spindle nose - table surface 580 mm Dimensions magnetic clamping plate 800 mm x 400 mm Scale ring pitch Y-axis 0.005 mm Scale ring pitch Z-axis 0.02 mm Auto. Transverse Feed Z-Axis 0.1 mm - 8 mm Speed 1450 1/min Auto. Vertical feed 0.005 mm - 0.05 mm Travel Travel X-axis 910 mm Y-axis travel 450 mm Feed hydr. Feed X-axis 7 m/min - 23 m/min Rapid traverse Y-axis 480 mm/min Rapid traverse Z-axis 990 mm/min Drive power Motor power main drive 4 kW Dimensions and weights Grinding wheel dimensions 350 mm x 40 mm x 127 mm Dimensions (length x width x height): 3.6 m x 2.4 m x 1.9 m Weight 3400 kg
Deck Oven W&P Matador MD101C Year: 2019 Little-used deck oven Werner & Pfleiderer Model Matador MD 101C from 2019 is for sale in stock. - Deck oven with gas burner - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: Matador MD101C52 - Fuel type : Oil gas / current is with gas burner - 79 kW - 5 shelves each 120cm wide and 160cm deep - 1 pull-out stove - With exhaust hood - Combitherm - 3N 400 V 50Hz 12A - Year of construction: 2019
3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition
1. Qty. 1 Second-hand slitting line Mfc.: DANIELI WEAN UNITED, LOOPCO, Built: 1994 Relocated: 2021 Raw Material CR, GI, COLOR COATING COIL Strip Width: 400 - 1,210 mm Thickness: 0.5 - 1.8 mm Slitter Stand (OD420 x ID255 10/15T=Each 30EA) Scope of supply: Uncoiler Coil Car with Coil Skid Uncoiler with Snubber Roll Coil Opener & No. 1 Pinch Roll Crop Shear Threading Table No. 2 Pinch Roll & Side Guide Slitter Stand Scrap Winder Loop Table Tension Pad with Separator Bridle Roll with Guide Table Recoiler with Separator Recoiler Coil Car with Coil Skid Hydraulic Equipment Electric Equipment 2. Qty. 1 Second-hand cut-to-length line Mfc.: DONGBU ENG Built: 1997 Relocated: 2021 Raw Material CR, GI, COLOR COATING COILS Strip width: 600 – 1540 mm Thickness: 0.5 - 2.0 mm Coil Weight Max. 15,000 Kg Sheet Length: 500 - 2,800 mm Scope of supply: Coil Car Unco ...
Precision machining center, Siemens Sinumerik 840 D Solution Line control, travels: X-axis 600 mm, Y-axis 630 mm, Z-axis 510 mm, 2 working spines 1-17,500 rpm, torque motor drive system, equipment including: oil distributor for rotary table, pneumatic pressure amplifier, magazine extension 144 tool positions (2 x 72), clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air query control, inductive tool breakage detection, scraper belt conveyor KNOLL 800 K-1/400, coolant cleaning compact belt filter KNOLL FKA 1200 and much more.
Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder
ZIM Hülsta Cabinet Press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Ser.-No.: 380125028 Body max. 260 x 1100 mm 2 supports at the bottom, sliding 2 press beams at the top, movable Beckoff Control Panel Roller track 4500 x 600 mm Roll width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm More items - new and used - can be found in our shop! International shipping costs on request!
ZIM Hülsta Rear Wall Saw Make: ZIM Hülsta-Werke Description: Backwall saw Year of Make: 2014 Serial Number: 380114008 Description: 2 movable Benz saw/drill units Feed roller table Protective enclosure with Leutze laser barrier system Switchboard Extraction piping Control terminal, consisting of: PC, flat screen EIZO FlexScan S1911 Keyboard and mouse, handheld scanner, terminal cabinet Mobile steel skip (beige) More items - new and used - can be found in our shop! International shipping costs on request!
SPECIFICATIONS: Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm Intake manifold: Ø 200 mm For the shredding of the following wood waste: - MDF strips - Pressed chipboard -Plywood -Cardboard EQUIPMENT: Motorized carpet: 11000 x 330 mm
Tenoning spindle: 1 St. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles -------------------------------------------- Machine is currently being checked! Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ------------------------------------------- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ------------------------------------------- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 13 ...
Fettbaker Kippfix Roka Werk TW 36-E -with 10 tilting planks Pool dimensions: 50x88cm and 8.5cm high Dimensions: 218cm length 92cm height
pressure: 500 t distance between columns: 1600 mm stroke: 60 mm max. ram stroke: 60 1 / min ram adjustment: 100 mm dayligth: 700 mm Table area: 1600x1400 mm ram surface: 1400x1150 mm total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 950 mm turning diameter over slide rest: 569 mm turning length: 2200 mm spindle bore: 90 mm faceplate: 800 mm steady: 500 bed width: 580 mm Rapid travel: turning speeds: 800 U/min digital readout: stepless reg. with elect. turning speeds: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x2x1,8 m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t passage width: . mm stroke: . mm tracking travel: 45 mm safety distance: 208 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding diameter: 660 mm grinding length: 2000 mm workpiece weight: 1500 kg grinding wheel diameter: 400 mm control: X-As. Diatos 602 total power requirement: 12/22/30 kW weight of the machine ca.: t dimensions of the machine ca.: m Including: With Diamant Wheel / Plunge Grinding With Spark out / Face Grinding The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes doubel-strokes per min.: 55 / 82 ram - range of adjustment: 80 mm table surface area: 950 x 700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 7,0 t dimensions of the machine ca.: 1400x2200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 300 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram adjustment: 80 mm table surface area: 700x550 mm ram surface: 400x300 mm table height: 870 mm hole in the table: Ø 280 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,0 t dimensions of the machine ca.: 1500x2000x2700 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40 t throat: 230 mm stroke: 8-88 mm throat: 230 mm no. of strokes: 130 Hub/min ram - range of adjustment: 63 mm table surface area: 560x450 mm ram surface: 250x200 mm hole in the table: Ø 190 mm table height: 790 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 3,0 t dimensions of the machine ca.: 1000x1800x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm ram surface: 310x260 mm table surface area: 620x500 mm hole in the table: Ø 250 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm weight of the machine ca.: 4,0 t dimensions of the machine ca.: 1200x1900x2800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 410 mm stroke: 8-112 mm no. of strokes: 55/82 Hub/min ram - range of adjustment: 80 mm table surface area: 950x700 mm ram surface: 700x450 mm hole in the table: Ø 280 mm table height: 800 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: BxTxH 1600x2200x3000 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 320 mm stroke: 8-112 mm no. of strokes: 60 Hub/min ram - range of adjustment: 80 mm : 355 mm table surface area: 720x550 mm ram surface: 400x310 mm sheet thickness - max.: 11 mm weight of the machine ca.: 9,5 t Overall size: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 8-112 mm no. of strokes: 55 / 82 Hub/min ram - range of adjustment: 80 mm table surface area: 800x570 mm ram surface: 560x355 mm hole in the table: Ø 280 mm table height: 800 mm tool hole in ram: Ø 50 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of the machine ca.: BxTxH 1600x2200x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 330 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 850x600 mm ram surface: 550x360 mm hole in the table: Ø 240 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1300x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t throat: 330 mm stroke: 20-120 mm no. of strokes: 50 Hub/min ram - range of adjustment: 100 mm table surface area: 800x640 mm ram surface: 500x400 mm hole in the table: Ø 330 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: 1500x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 400 mm plate thickness: 6 mm plate length: 0-6000 mm speed: 90 m/min material cross-cut: 1200 mm² total power requirement: 6 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 320 mm stroke: 8-100 mm no. of strokes: 120 Hub/min ram - range of adjustment: 63 mm table surface area: 860x620 mm ram surface: 540x360 mm hole in the table: Ø 270 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 415 mm stroke: 8-140 mm no. of strokes: 48 Hub/min ram - range of adjustment: 80 mm table surface area: 920x670 mm ram surface: 700x450 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 1500x2000x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: 45 Hub/min ram - range of adjustment: 100 mm table surface area: 800x620 mm ram surface: 500x400 mm hole in the table: Ø 360 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2200x2000x3600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 280 mm stroke: 8-100 mm no. of strokes: 56/84 Hub/min ram - range of adjustment: 63 mm table surface area: 620x500 mm ram surface: 310x260 mm hole in the table: Ø 250 mm table height: 850 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1200x1900x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
for sale is a table drilling machine from Westfalia, Subject to prior sale, changes and errors!
turning diameter over bed: 600 mm turning diameter over slide rest: 360 mm turning length: 2250 mm spindle bore: 63 mm faceplate: 500 mm turning speeds: 11,2-2000 U/min digital readout: Haidenhain bed width: 350 mm 3-jaw chuck: 300 mm steady: 160 mm Rapid travel: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Chip conveyor can be purchased as an option for €7,500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Throughfeed Drilling Machine Weeke PKA3 Workpiece length up to 3000mm 6 x 2 drilling units vertical / from below 2 x 2 drilling units horizontal / from left and right side
CNC lathe WEISSER Univertor AS 90L, Maximum clamping diameter: 200 mm, Maximum workpiece diameter: 120 mm, Maximum workpiece length: 400 mm, travel:, X-axis: 280 mm, Z-axis: 500 mm, Siemens Sinumerik control system, 12-station tool turret, With automated loading and unloading
CNC lathe WEISSER Univertor AS 90L, Maximum clamping diameter: 315 mm, Maximum workpiece diameter: 400 mm, Maximum workpiece length: 150 mm, travel:, X-axis: 400 mm, Z-axis: 280 mm, Siemens Sinumerik control system, 1 attached industrial filter, 12-station tool turret, 1 measuring system Marposs Compact IPC6
Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are used to illustrate the material. - The material color may vary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. The scope of delivery includes: 02x Workbench stand, used Material colour: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( bolted truss ) 04x Workbench crossbar, used Material colour: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x Screw M10x35 08x Nut Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only a ...
Westfalia MSD 50 01 076 Milk & Whey separator Application: Fat separation, cream separation, milk skimming, whey skimming Capacity: 5.000 lt per hour feed milk Including tools and stainless steel base frame
Werner & Pfleiderer WP Model: Multimatic MUC 5 5-row Weight approx. 35 to 85 grams Output approx. up to 8750 pieces/hour Press pressure adjustable Ribbon flour Interchangeable chamber drums Connection 400V, 16A-CEE plug Machine We have more bakery machines in stock for you!
Laurijsen WeegAutomaten COMBIMAT CM-L4S Linear scales The linear scales from Combimat were specially designed as an initial model for the first first step in the automation of the packaging process. Thanks to the compact design, the weighing devices can be easily installed in any production area and can be cleaned very quickly when changing quickly when changing products. Applications The linear scales from Combimat are particularly suitable for dry, fine-grained products that can be easily conveyed in the conveyed in the vibrating chute: Tea, coffee, corn, rice, seeds, grain, animal feed, granulates, grain, etc, Advantages The weighing machines from Laurijsen WeegAutomats offer numerous advantages: - Very compact design - Machine made entirely of stainless steel - Touchscreen operation - Quick cleaning, very suitable for short suitable for short passages - Maintenance-fre ...
1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - / Contact us at -
LWA (Laurijsen WeegAutomaten) Atoma E233 Technical data Construction data: Machine type : Atoma E233 Weighing range : Weighing speed : up to 15 weighings per minute The following products can be processed on the automatic weighing machine: General dimensions: Overall dimensions W x D x H : 2,000 mm x 650 mm x 1,100 mm Total weight: approx. 500 kg Required power supply: Supply voltage : 230 V alternating current Control voltage : 24 V direct current Operating pressure : 4 to 6 bar Protection class : IP 65 Mains earthing : for example TN system Frequency : 50 Hz +/- 1 % continuous operation +/- 2 % short time Physical operating conditions: Ambient temperature, in operation : +10 to +40 degrees Celsius Relative humidity (RH) : 30% to 85%, non-condensing Lighting : normal ambient lighting. Altitude : up to a maximum of 1000 metres above sea level. Find more here - / C ...
Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - / Contact us at -
Used envelope film machine, cellophone machine by WEGA type Fk-6 . Technical parameters of the machine: - Overall dimensions (L x W x H): 1050 x 670 x 980 mm; - Weight: approx. 180 kg; - Power supply: 1220V, 50-60Hz, 10000W; - Pneumatic supply 0.4-0.6 MP, 20 l/min; - Operating temperature: 15÷40oC. The semi-automatic foiling machine type FK-6 is designed for foiling rectangular boxes with flat and rigid surfaces using the enveloping method. Maximum output: 400 - 600 boxes/hour Maximum box dimensions: 70 x 200 x 230 mm Minimum box sizes: 7 x 60 x 50 mm Film parameters: - polypropylene coextruded film, heat-sealable on both sides, bi-directionally oriented; - thickness: 20-35 µm; - maximum width: 300 mm - minimum width: 70 mm - maximum diameter of film roll: 300 mm; - inner diameter of thimble: 76 ± 5 mm; - recommended film type: 25MB 400 Mobil Pl ...
maximum number of results exceeded
please refine your search
