we used for sale

greates pass round over bed: 480 mm swing diameter over bed slide: 300 mm turning length: 1500 mm centre height: 240 mm centre distance: 1500 mm spindle bore: 42 mm spindle turning speed range: 14 - 1400 U/min total power requirement: kW weight of the machine ca.: 2,4 t dimensions of machine L x W x H: 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Temperature range: -60 to 130°C, the control system is defective, including documentation and wiring diagrams, on-site inspection is possible.

Manufacturer: Weber Type: CCS 305 Year of Make: 2019 Weight: 990 kg Machine dimensions: H 2065 x W 960 x L 2353 mm Total length incl. discharge belt: 4000 mm Power supply: 400 V, 50 Hz Power: 4 kW Cutting speed ( rpm ): max. 400 Cutting chute height : 12/135/150 mm Sniggle width : 250 mm Product length: 1000 mm Cutting System: Circular Knife Cutting thickness : 0.5–50 mm Manual loading The Weber CCS 305 is an entry-level model in high-tech cutting technology. It is loaded exclusively manually. Operation is simple, product changeover is uncomplicated and the cutting edge and side stop can be adjusted to the product width. Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

LISTING ID 22518 Brand: YANMAR Model: 6HYM-WET Condition: Brand New Specification - Model : 6HYM-WET - Number of cylinders: 6 in-line - Bore × stroke (mm) : 132.9 × 165 - Displacement (lit): 13.733 - Rated output (kW(hp)/rpm):M : 441(600)/2100 - Combustion system: Direct injection - Aspiration: Turbocharger + intercooler - Starting system: Electric starting motor (24V 6.0kW) - Cooling system: Heat exchanger - Size of flywheel housing and flywheel: SAE #1 and 14 in.

Main spindle bore: 42mm, rated voltage: 400V AC, rated current: 45A, connected load: 26kW, control: Siemens SINUMERIK 840D/PCU50, length: 3400mm, width: 1400mm, height: 1750mm, weight: 2.5t, operating hours: >100,000h, spindle hours: 48,348h, with FMB Turbo 5-42 bar feeder, documentation and service reports, regularly maintained, an on-site inspection is possible, available from March 2027.

Weibert F40 - Table milling machine Milling spindle 30mm 90° Speeds: 1400/ 3500/ 6000/ 8000 rpm Casting table length 1000 mm width 500 mm Motor 2.2kW 400V Integral Safety Rails 500mm Pressure Device MORI Table extension right and left Right-counterclockwise rotation of the milling spindle

turning diameter: mm turning length: mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Variable speed 5 - 22 m/min Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood

Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Cardan shaft drive Pneumatic pressures Feed speed variable 5 - 24 m/min, motor 3 kW Motorised height adjustment of top presssure beam Infeed table 2200 mm length tools not included

curved conveyor belt bend 90° width carpet 500 mm total width 700 mm min/max height 890/990 mm length inner size 2800 mm engine 0.55 kW

" SPECIAL PRICE DUE TO BUSINESS CLOSURE" 200 mm K+G WETTER Mixer Grinder Type: MAW U200 Model: 431 Type designation 431 Year of Make: 1998 2 speeds Nominal power meat auger drive 21/35 kW Nominal power feeder drive and mixing shaft drive 4.7/5.9 kW Standard operating voltage (special voltages available on request) 400 V / 50 Hz Nominal power 41 kW Rated current 85 A Fuse 100 A gL Cutting Set Unger U 200 Perforated disc diameter 200 mm Processing capacity 184 kg/min (11 t/h) Hopper capacity 530 l Mixing capacity 350 kg Weight 2280 kg Ejector for auger and cutting set hydraulic Support device of the pre-cutter Mixed Time Selection incl. mast load for 200 litre cutter wagon – manufacturer Kittner – year of construction: 2017 completely overhauled Shipping time: immediately

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

# GEA Westfalia SC 70 Self-Cleaning Industrial Clarifying Centrifuge – 37 kW Overview Industrial self-cleaning clarifying centrifuge manufactured by Westfalia Separator AG, part of GEA Westfalia Separator, designed for the centrifugal separation and clarification of liquid products containing low concentrations of suspended solids. The equipment is configured for processing vegetable and fungal fermentation broths, botanical extracts, protein broths and other liquid products requiring fine-particle separation. It can also be used downstream of a decanter or another preliminary separation stage to improve liquid clarification. The centrifuge features a hydrohermetic configuration, an automatic Hydrostop solids discharge system, vertical motor drive, a centripetal pump impeller for pressurised clarified-product discharge, and associated feeding, discharge, instrumentation  ...

new standing seam roll forming machine, without length measuring device, without cross shear, emergency stop switch, 7 stations, Sheet width: 250 - 700 mm Sheet thickness steel: 0.7 mm Sheet thickness aluminium 0.8: mm Sheet thickness stainless steel 0.5 mm Machine weight :190 kg Dimensions: 1200 x 900 x 580 mm Total power requirement: 220 V Colour: grey Profile height: 25 mm with width adjustment Infeed width: 250 - 700 mm Roll forming speed: 9 m/min

Measuring length: 500mm, measuring diameter: 160mm, max. workpiece weight: 15kg, axes: 4, measuring mode: optical/laser/fiber probe. Including hydraulic chuck and fiber insert for Werth Fiber Probe. Documentation available. On-site inspection is possible.

Offer 24130 Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified

WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm

Condition: used, ready for use Year of manufacture: 1998 Control: Siemens 840 C Travel X/Y/Z: 2x600 or 1x1,800 / 425 / 400 mm Main spindle: SK40 / 7,500 rpm / 106 Nm / 14 kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 kg

Wood chipping machine Low-noise low-speed machine with press drawer WL12/30 Hopper dimensions 1200x1200 Diameter of shaft 368mm 58 cutting blades in two rows 15/20mm Strainer Main motor 30kW Weight approx. 3200kg

UD 24 CNC YOC 1990 Condition: well-maintained Year of Make: 1990 Control: Bosch CC200 Max. turning diameter with jaw chuck: Ø110 mm Max. turning length: 180 mm Bar passage: Ø24 mm Main spindle: 5,000 rpm / 5kW Tool turret: 8-cavity VDI20 W/D/H: 1,830 x 1,435 x 1,625 mm Weight: 1,600 kg Bar feeder: Ø24 x 3,000 mm Bar feeder W/D/H: 4,800 x 900 x 1,300 mm Equipment: - Collet + jaw chuck -Tailstock - IRCO Bar Feeder - Parts catcher - Optics for tool measurement - 8 pieces of VDI mounts

WEIBERT WJ-K315-A new Sliding table saw The original Weibert sliding table saw should be it! Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!

WEIBERT WJ-K315-A new Sliding table saw Format sliding table: 2600mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A Optional equipment at an additional cost: With sliding table 2743mm WJ-800102 With sliding table 3000mm WJ-800103 With sliding table 3200mm WJ-800104 Cutting width of 1270mm, WJ-800106 Cutting width of 1500mm, WJ-800107 Miter stop 900mm, WJ-400207 Eccentric clamp Images with special equipment if necessary!

Key data: 400 mm

Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets

Grinder Manufacturer: Kramer Grebe Wetter Model: Grinder 130mm Made of stainless steel Lowest noise level Easy cleaning Hopper volume: 245 liters Voltage: 400V 50Hz Weight: 850kg

120 ltr. stepless with feeder and ejector

Manufacturer: Webomatic Type: CD 110 Machine dimension L x B x H: 1140 x 900 x 1050 mm Two cutting-sealing bars: 500 mm Chamber dimensions L x B x H: 650 x 500 x 220 mm Possibility to work with gas Vacuum pump: 100 m3/h Machine cycle: 15 - 40 sec Voltage: 380 V, 50 Hz Power 2.2 kW

Wooden entrance length: min. 130 mm Max. 1000mm Ø370mm Wood cross-section: Min. 20x40mm Max. 80x180mm Wooden output length: Min.3700mm Max.7400mm Tine version vertical/horizontal 10/11 3.8mm pitch PVAC White Glue, 2-sided glue application Connected load 65 kW

Year: 2020 - technically efficient, ready to work - after full service - automatic feed - disc diameter: 400 mm - cooling system - disc rotation 45/90/135° and tilt 45° - vertical and horizontal pneumatic pressure - compressed air preparation station

5-shaft automatic planer WEINIG PROFIMAT 22N second hand machine in very good working conditions n.5 spindles working condition : good CE mark : NO volt. 380/50 with tools : Yes . n.04 LEITZ tools with interchangeable knives + n.04 spare tools (see photo) Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 7,5 ( Kw 5,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) Technical details : forward motor power Hp 3 ( Kw 2,2 ) spindle rotation speed rpm 6000 feed speed : from 6 to 22 mt./min max. useful working width mm. 220 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 lubrication system electric height adjustment set of service keys / documentation

Weibert FS32 Spiral Dressing thickness planer FS32 Dressing Thickness Planer with Spiral Knife Shaft Weibert FS32 Planing width: 320mm Spiral knife shaft Motor power: 4KW n=4500rpm, 400V Passage height: 4-225mm Professional stop Digital height adjustment WJ-300100 Special price: OPTIONS AT EXTRA COST: Slotted Hole Drilling Device Wescott Drill Chuck 0-16mm Driving equipment Dressing table extension adjustable 750mm

Automatic planing profile milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm(140) 5 working spindles DM 40 mm Long work table in the inlet ( approx. 2000 mm ) Working spindle bottom 4 kW / Left + Right 7.5 kW / Top 5.5 kW / Plastering bottom 5.5 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 - 24 m/min. Feed roller in front of dressing Control - Button operation Auto. Lubricant pump Mechanical Digital Displays Machine in CE version Year of manufacture 2001 Without editing tools Machine is WORKSHOP OVERHAULED in GOOD - CONDITION from stock Lieboch

Heat exchanger thermal works 4 pcs. in different Sizes Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

Control Heidenhain TNC 620 Travel X/Y/Z 700/500/500 mm Speed 12,000 1/min IKZ 30 bar Belt filter system Probe Tool magazine for 30 Wkz. SK 40 Conveyor

WEIBERT WJ-K315-A Sliding table saw Format sliding table: 3000mm Engine power: 4 KW (5.5 HP), 400V, n=4000 min Cutting height: 103mm Saw blade: 250-315mm Swivel: 90°-45° with motorised height adjustment and swivelling of the sawing unit Saw blade pendulum protection upper protective cover wide and narrow Scoring unit with motor WJ-800100-A

Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90

Inv. Num. : 7918 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1984, GO 2006 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 2000 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Inv. Num. : 7920 Type: UPW 12,5 Producer: VEB Wema Bad Düben DDR Created: 1980-GO 1998 Parameters: Rolling force: 12.5 t Max. workpiece diameter: 70 mm Workpiece width: 200 mm Power consumption: 4 kW Length: 1125 mm Width: 1400 mm Height: 1150 mm Weight: 2100 kg Equipment: Thread Rollers Ring magazine for automatic operation Support ruler

Bread Ribbon Rounding and Long Forming Machine WP Globus U -Bread round and long knitting machine -Werner & Pfleiderer Globus U -with 2 flour shakers -Mobile on castors Dimensions: 180x73x169cm (WxDxH)

SW BA600-2 CNC machining center with swivel table / built in 1999 / Siemens 840C control / incl. chip conveyor, coolant lubricant preparation and extraction

Capacity 75 kg Output capacity max. 800 kg/h Blank weight 0.25 - 3100 g

Cross-cut line Opticut 150 -4 4 ejections built in 2004

Panel length: 3,500 mm Panel width: 1,300 mm Workpiece thickness min: 11 mm Workpiece thickness max: 60 mm Crkikw9B Input length min: 300 mm Cycle time: 200 s Capacity m2/ 8h: 720 High Frequency Press: Yes Power HF generator: 30 kW Gluing unit: Yes Joint gluing press: Yes

Continous Form Collator Micro Pack S 50 Serial-No. 92-164 / 1992/51/ mpkc 6 Stationen / Stations Format / Size max. 330 x 12 Zoll umstellbar bis auf 7 Zoll / convertible until 7 inch Standard 240 x 12 Zoll / inch Einlauf breite bis / Infeed width until 55 cm Crimpung alle 2 Zoll mit Ersatzmesser / Crimp every 2 inches with spare blade Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

machine measurements: 2.100 x 2.200 x 2.100 mm machine weight: 2.000 kg power capacity: 36 kW Condition: used Specification: cleaning and degreasing system FIRBIMATIC LOGICA 200V closed cleaning system for the cleaning of of metallic components with highly stabilised perchloroethylene - second-hand - Closed cleaning system for the cleaning of metallic components components with highly stabilised perchloroethylene. - PER-based cleaning and degreasing system Possible cleaning cycles: 1. pre-cleaning (spraying) 2. main cleaning (spray and flood cleaning) 3. rinsing (hosing down) 4. vapour degreasing 5. vacuum drying - All cleaning cycles are freely programmable. - Filling volumes: Tank 1: 170 litres Tank 2: 80 litres - Type of solvent: Perchloroethylene - Total connected load of motors: 9.65 kW - Installed electrical power incl. heating syst ...

Single column - eccentric press WEINGARTEN type E 40 Masch. No. 643 / 62 Year of construction 1963 Pressure capacity 40 ton. Projection 250 mm Table opening 150 x 80 and Ø 200 mm Table area 560 x 460 mm Plunger area 250 x 200 mm Adjustable ram stroke 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100 / 130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 volts, 50 Hz Table height above floor 840 mm - Clutch-brake combination thanks to WEINGARTEN friction threaded clutch with OT flow protection - Electric stroke release via two-hand operation - Overload protection by crushing plate - Manual grease central lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirements L x W x H 1800 x 1500 x 2200 mm Weight 3.1 ton.

SKU BS-250M Return Manual Rake angle adjustment Ehrwinkelkopf Grit angle 1 – 60° Motor power 2.2 kW Cutting area 90° rectangular 259 mm x 110 mm Capacity Round 90° x 45° x 60° 227mm / 150mm / 90mm Square capacity: 90° x 45° x 60°, 220 x 220 mm / 144 x 144 mm / 84 x 84 mm Table height 889 mm Strip guide carbide and ball bearings Belt dimensions (H x W x L) 27 x 0.9 x 2470 mm Blade speed 20 - 85 rpm Lowering Control Hydraulic Support Drive Gear Operating voltage 230 V, 50 Hz, 1-phase Delivery weight: 216 kg Shipping dimensions (L x W x H) 1524 x 1118 x 1219 mm

SPECIFICATION KB-45 Cutting capacity 455mm Maximum working height 255mm Table 600 x 500 mm Inclination: 4 ways up to 15° Saw blade length 3490mm Saw blade width 3-16mm Bsjuxvmq0O3 Saw blade speed 25-115m/min Butt welder capacity 3-16mm Engine Size: 1HP Weight 285 Kgs Height 2020mm Width 1100mm Depth 660mm STANDARD FEATURES Circuit breaker Single-phase / 3-phase supply Built-in saw blade and tire cleaning brush Saw blade welding machine, blade shears and grinding machine Nuttisch Low-voltage halogen lamp Mitre protection for oblique cuts Quick-gap stop for straight cuts

Universal lathe of the Weiler brand suitable for tooling, fixture construction, training and mould making Tip Height : 280mm Speed :48-2500 rpm Tip height : 280 mm Circumferential diameter over bed : 570 mm Circulation diameter over face slide : 340 mm Center width : 1,000 mm Rhqel FULCRUM SHAFT Spindle head DIN 55027/DIN ISO 702-3 : Gr. 8 Spindle bore : 83 mm Spindle diameter in front bearing : 120 mm MAIN DRIVE Drive power 60 %/100 % ED : 15/12 kW Speed range : 1 – 2,500 rpm Number of speeds : infinitely variable FEED RANGE Number : infinitely variable Longitudinal : 0.001 – 10 mm/rev Plan : 0.001 – 10 mm/rev Longitudinal feed force : 10,000 N Feed force plan : 7.000 N Max. longitudinal rapid traverse speed : 6/3 m/min THREADING AREA Metric threads : 0.1 – 400 mm Inch thread : 56 – 1/4 TAILSTOCK Quill ...