we used for sale

Gear motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Price: per piece -Number: 8x available -Dimensions: 405/140/H180 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 62 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 430/160/H200 mm -Weight: 16.7 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin: 50 x 125 mm -Number: 1x recordings available -Price: per piece -Weight: 4.6 kg/piece

Tool holder, milling holder, milling tool -Adjustment: SK50 -Test pin with tip: 40 x 143 mm -Number: 1x recordings available -Price: per piece -Weight: 3.7 kg/piece

pdf attached

Shared oven WP Matador Store 6.4 A used electrically heated shared oven WP Matador Store 6.4 for bakery and confectionery is currently for sale and immediately available in our warehouse in Bielefeld. The stove is equipped with base and exhaust hood. Floor oven W&P Matador Store 6.4 - 4 floors each 60x40cm -per floor one sheet 60x40cm -1 x Hood 8 x ADK with RBA 0.1 kW 230 Volt - 1x base 6.4 600 - with exhaust air hood including vapour condenser -electrical data per floor: 3.6kW; 3-400V; 1.45 kW - Year of construction External dimensions approx. Width : 93cm Depth 100cm Height: 210cm incl. hood Floor entrance height 14cm Oven is functionally tested and cleaned -Oven can be inspected and tested in our warehouse

CATALOG NUMBER 6674 TECHNICAL DATA - max planing width 150mm - max planing height 130mm 7 spindles: 1) horizontal lower 150mm 3kW 2) vertical right 130mm 3kW 3) vertical left 130mm 4kW 4) horizontal upper 150mm 4kW 5) horizontal lower 150mm 3kW 6) vertical right 130mm 4kW - diameter of all spindles 35mm - all adjustable spindles up / down and right / left - from above, 4 pulling rollers, toothed - 4 rubber, pulling rollers from above - 2 clamps from above - electric adjustment of the planing thickness of 0.25kW - length of the introductory top 1970mm - central lubrication of the table top - smooth regulation of the feed speed - 1.5kW feed motor - diameters of the extraction ports 6x120mm - dimensions length / width / height 4000x1300x1600mm - weight about 3000 kg - German production - for 6 heads - used planer, very good condition Net price: PLN 36900  ...

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 5x spindle tools -Adjustment: SK50 -different shaft sizes: 22/25/30/40 mm -Price: complete -Weight: 19.2 kg

Gear motor, electric motor, electric gear motor -Speed: 304 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/200/H190 mm -Weight: 15.7 kg

Tool trolley for bending tool, die, upper knife, upper tool, straight tool -Tool trolley for the: Tool for a press brake -with several compartments -Dimensions: 1165/720/H1000 mm -Weight: 208 kg

small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022

Geared motor, electric motor, three-phase motor -Speed: 64 rpm -Power: 2.2 kW -Design: B3 -Shaft diameter: Ø 60 mm -Protection class: IP 33 -Dimensions: 680/295/H420 mm -Weight: 103 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Grinding spindle: for lathe -Electrically operated -Max. Speed: 6900 rpm -Admission: M42 x 1.5 mm -Dimensions: 600/390/H355 mm -Weight: 64 kg

Gear motor, electric motor -Speed: 15 rpm -Power: 0.18 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Dimensions: 450/200/H200 mm -Weight: 23 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 11x spindle tools -Take: SK40 -partly with: CNC pull studs -different shaft sizes: 25-180 mm -Price: complete -Weight: 42 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 36x spindle tools -Take: SK40 -with: CNC pull studs -different shaft sizes: 30-125 mm -Price: complete -Weight: 86 kg

Gear motor, electric motor -Speed: 40 rpm -Power: 9 kW -Construction: B3 -Diameter shaft: Ø 80 mm -Protection class: IP 33 -Dimensions: 1000/385/550 mm -Weight: 260 kg

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK4 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 13x recordings available -Price: per piece -Total length: 200 mm -Weight: 1.1 kg/piece

SMA 700 Rocker saw Firewood saw Battery starter G&JAN-1055006

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK3 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 22x recordings available -Price: per piece -Total length: 175 mm -Weight: 0.8 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 8x recordings available -Price: per piece -Total length: 155 mm -Weight: 0.8 kg/piece

Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 8x recordings available -Price: per piece -Total length: 230 mm -Weight: 1.2 kg/piece

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 9x spindle tools -Take: SK40 -different shaft sizes: 85-125 mm -Price: complete -Weight: 17 kg

Weipert Crankshaft Grinding Machine Weipert Grinding lathe Centering tip: Röhm 110 H MK5 Machine length: 4300 mm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. More grinding machines in other sizes - new and used - can be found in our shop! International shipping costs on request!

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Number: 13x spindle tools -Take: SK40 -different shaft sizes: 22-63 mm -Price: complete -Weight: 24.3 kg

Webo BR 35 V / 1250 Radial Drill Workspace Delete. v Spindle to stand smallest 280 mm / largest 1250 mm Delete. v Spindle or drill. b. Table top smallest 0 mm / largest 900 mm Delete. v Spindle to base plate smallest 200 mm / largest 1400 mm Diameter of the drill smallest 860mm / largest 2800 mm Swivel range 2,200mm / clamping diameter approx. 240mm Aufspannfl. upper 650 x 500 mm / side 770 x 500 mm Drilling spindle 40/85 ⌀ mm Speed 30 - 1800 rpm Year of construction 1971 Further technical data can be found on the machine map Item condition: used, impeccably and top maintained. Action components: Only the Webo BR 35 V / 1250 without the shown reversible clamp, this can be done individually or as a combination offer in our other Auction can be purchased. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loadin ...

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 4 kW 960 rpm -Max. Delivery rate: 2.58 m³/h -Max. Pressure: 3 bar -Max. Temperature: °C -Dimensions: 730/350/H310 mm -Weight: 88 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 295 mm -Length: 496 mm -Height: 95 mm -Plate thickness: 30 mm -with: support ribs -Weight: 30 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 180 mm -Plate thickness: 25 mm -with: support ribs -Weight: 90 kg

Gear motor, electric motor -Speed: 50 rpm -Power: 2.2 kW -Design: B5 -Diameter shaft: 40 mm -Flange diameter: 250 mm -Diameter recess: 180 mm -Protection class: -No nameplate -Quantity: 1x motors available -Dimensions: 700/280/H300 mm -Weight: 63kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 450 mm -Flange: Ø 172 mm -Hole circle: Ø 135 mm -Through hole: Ø 80 mm -Weight: 80 kg

Available in stock 1 x Used Westfalia Lub. Oil Separator, model OSA 20-96-066. The unit was installed in a HFO power plant that stopped operating. The equipment is used but in good working conditions. Note: We also have some original parts from GEA Westfalia to sell. If you are looking for something in particular, please contact us and we will see if we have anything in stock.

Westfalia MSD 60-06-076 | Clarifier | Y.O.M 1992 | Max Output : 30,000 L/H Condition : Good & Complete Tools Controls Manuals Contact us for more information

Gear motor, electric motor -Speed: 204 rpm -Power: 4.0 kW -Construction: B3 -Diameter shaft: Ø 60 mm -Protection class: IP 33 -Dimensions: -Weight: 113 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 150 rpm -Power: 1.5 kW -Construction: B3 -Diameter shaft: 50 mm -Protection class: IP 33 -Dimensions: 660/260/H300 mm -Weight: 74 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 51 rpm -Power: 0.25 kW -Design: B14 angle -Shaft diameter: 25 mm -Protection class: IP 44 -Dimensions: 580/250/H200 mm -Weight: 35 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 50 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Dimensions: 450/230/H180 mm -Weight: 18 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Transfer in current condition as seen -Speed: 20/63 rpm -Power: 0.5/0.9 kW -Construction: B3 -Shaft diameter: Ø 35 mm -Protection class: IP 44 -Dimensions: 680/195/H320 mm -Weight: 53 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 146 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 45 mm -Protection class: IP 33 -Dimensions: 630/260/H300 mm -Weight: 75 kg

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 154 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 50 mm -Number: 1x motors available -Price: per piece -Dimensions: 590/250/H310 mm -Weight: 57 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 122 rpm -Power: 1.1 kW -Construction: B3 -Diameter shaft: 50 mm -Number: 3x motors available -Price: per piece -Dimensions: 590/250/H310 mm -Weight: 63 kg

SAA 3001/3003 Suction sturdy construction made of solid sheet steel lower static charge compared to plastic constructions Easy to drive thanks to swivel castors Air capacity 3910m³/h Diameter on the device: 150mm Diameter at distributor: 3x 100mm 50Hz 2200W Weight 59kg G&STÜ-5922301 230 volts G&STÜ-5922303 400 volts

Ice-generator Ice production: approx. 700 kg in 24h Power supply: 400 V, 50 Hz, 3 phase, 16 A Control voltage: 24 V Power consumption: 2,1 kW Refrigerant: R 404 A Dimensions: Width 1000 mm Depth 800 mm Height 1100 mm

ASA 4303 Aspirator Nominal volume flow: 4300m³/h Filter area 2x 2.4 m² Chip collection volume 2x 215l Suction nozzle outlet: 2x 100mm, 2x 120mm Input power 3,8kW Motor 400V 50Hz LxWxH 1700 x 600 x 2400mm Weight 69kg G&STÜ-5128433

Weibert WBBS 550 Log band saw The drive is via a 9kW petrol engine trunk diameter 555mm board width 530mm band saw blade stroke 540mm Min band saw blade stroke 20mm cutting depth 220mm Cutting length 3.7m Min. cutting length 0.9m Motor power drive 5.5 kW Wheel-D: 400mm Impeller width: 25mm Band saw blade: 3200 x 27 x 0.9mm Waste 1.5-2.2mm Saw band speed 15 m/s Electric height adjustment of the band saw blade Width 1750mm Height 1450/1660 Weight 360kg WJ-WBBS-550-BEN Optional: Extension section 2.3m Aspirator Slewing timber bar: length 4,6m

Weibert SMA-700T Rocker saw PTO drive Tractors power min. 15hp PTO speed: max. 540 rpm Drive saw blade: belt drive Saw blade speed: max. 1440 rpm Saw blade diameter: 700mm Carbide-tipped Holder 30mm, tooth pitch 32mm, thickness 3.2mm Total weight 136kg Dimensions: 109mm x 85mm x 110mm (LxWxH) G&JAN-1055004

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 256 rpm -Power: 0.55kW -Construction: B3 -Diameter shaft: 25 mm - Degree of protection: IP 33 -Number: 1x available -Dimensions: 405/200/H210 mm -Weight: 22kg

Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 -Admission inside: MK4 -Tip height: 165 mm -swiveling -Dimensions: 600/500/H300 mm -Weight: 84 kg