wd 200 used for sale

Incremental precision measurement and displacement measurement system for precise recording of small travels. The Steinmeyer/FMS IKF 10 measuring head works incrementally and is suitable for comparative and relative measurements. The measured value is displayed via the external display unit PU 11 with digital display and switchable units (mm/inch/degree). The stable mechanical design with solid base plate, rotary table and fine adjustments allows it to be used as a stationary test or measuring station, e.g. in quality assurance, production control or development. Scope of delivery:     •    Incremental precision probe / measuring head IKF 10     •    Display unit PU 11 incl. connection cable     •    Measuring stand with base plate     •&nbs ...

CNC Control: MAZAK & FANUC L-64 Cutting table: spiked Cutting head: CO₂ laser Suction system: KEMPER with external unit Indicated voltage: 40000 V X-Y-Z axis strokes: 3335 x 1545 x 420 mm A-axis: ±360° B-axis: ±135° Maximum part dimensions: 3050 x 1525 x 22 mm Load capacity: 7.9 kN / 810 kgf Laser power: 4000 W Laser Model: YB-L400A8M Weight: 14600 kg Status: Complete machine with suction unit and accessories Additional information: Sold with an additional laser unit and many spare parts Additional information: Disassembly and loading at the expense of the buyer

Tap capacity M.30 Drive gears (hardened and ground) Automatic power supply Number of power supplies 3 x 0.10-0.20-0.30 Clutch electromagnetic Main engine power 2 HP 380 Volt Material clamp automatic manual operation System air pressure 8 bar Spindle column distance 300 mm Table size 520 x 390 mm Cooling device with lubrication system. Drill ejector . Light installation. Drill protection with microswitch. MPS automatic feed table: Type MPS system 4010 Roll feed table l x w 3000 x 360 mm Complete with control cabinet with digital readout

Tool presetting and measuring device from Zoller, smarTcheck series, with PC and monitor unit. Equipment / scope): Tool presetter with measuring optics Machine base / base cabinet Monitor stand with 2 monitors, keyboard and mouse Integrated industrial PC Lighting and camera unit Documentation and documents Condition: Used. Visually well-groomed overall impression with usual signs of wear due to age and use. Machine was last in use. Software starts (see screenshot). Scope of delivery: Zoller smarTcheck complete PC unit in the base cabinet 2 monitors, keyboard, mouse Documents / printouts Manufacturer: E. Zoller GmbH & Co. KG Machine: Zoller smarTcheck Type: V400S-00083 Serial No.: 876-0608/0 Year of manufacture: 2006 Power supply: 230 V / 50–60 Hz Power: < 1 kVA Pneumatics: 4–6 bar Software: Zoller (Version 3.14.013, according to the display) PC: Zoller-IPC (Pentium 4, 2.4 G ...

Starthole Drilling Machine / Super Drill EDM Starthole Drilling Machine (EDM) for the production of starting and through holes in hard materials, e.g. for die-sinking EDM or wire EDM. Manufacturer: CASTEK Mechatron Ind. Co., Ltd.Model: HK-24 Year: 02 / 2002 Serial No.: 9024080 Equipment: Cross table (manual) Digital control and operating unit Protective cover / splash guard Cooling/flushing device Emergency stop operating instructions available (provisional manual HK-24) Accessories / scope of delivery: Electrode material (brass tubes, mixed, as shown) Various clamping and small parts Tool cabinet with Drawers incl. contents. Condition: Used Normal signs of wear due to age and use Machine comes from ongoing workshop operation. Connection: 400 V / 3-phase (3 PE) Power consumption: 4.5 kVA Compressed air requirement: approx. 25 l/min Operating pressure: 4–8 kg/cm² Electrical control:  ...

Roughness Gauge / Surface Gauge Manufacturer: Hommelwerke (Hommel-Etamic / Jenoptik) Type / Model: T 2000 Machine Type: Roughness Gauge / Surface Gauge Condition: used, decommissioned, unchecked / defective Year of manufacture: not known Serial number: 506680 Country of manufacture: Germany Equipment / scope of delivery • Roughness gauge Hommelwerke T 2000 • Measuring column LV-50 • Stylus TKL 300/17 • Stylus with magnetic adapter TKU • Control unit MSC-1 • Machine table with integrated granite measuring plate • PC unit with monitor • Connection cable and visible accessories Condition / Notes • The system has been shut down. • A functional test has not been carried out, the overall technical condition is unknown. • The evaluation unit has a display, but it remains black, there is no display. → It can therefore be assumed that the display unit is defective. •  ...

Machine number: A0045A0007 Operating voltage: 400 V Frequency: 50 Hz Connection: 17 kVA Rated current: 35 A Travel X-axis: 2015 mm Travel Y-axis: 1215 mm Max. material thickness: 6.4 mm Max. workpiece weight: 150 kg Max. punching force: 165 kN max. hold-down force: 10 kN Max. stroke sequences punching Hole spacing 1 mm: 600 rpm Signing: 1300 rpm Max. axis speed X-axis: 80 m/min Y-axis: 55 m/min simultaneous: 97 m/min max. acceleration X-axis: 10 m/qs Y-axis: 5 m/qs C-axis punching/thread forming: 175/min Number of positions in the linear magazine: 17 Number of tools/claws: 15/2 Number of tools when using multi-tool/claws: 15-150/2 Number of claws location/2: max. 2/3 Reject parts: max. part size via disc chute: standard 180 x 150 mm max. part size via disc chute with movable support table: 460 x 500 mm Accuracy position deviation: +- 0.1 mm Average position spreading width: +- 0.03 mm in ...