wd 200 used for sale

Equipped with a 3-stage Rovatti pump (2023), Iveco” diesel engine, support legs, retractable drawbar. Auction-ID: A1-46064-10

Extraction diam 250mm, normal volume flow 3534 m3/h, max volume flow 6000 m3/h Auction-ID: A1-45502-129

FIORINI GRX tank, electric pump with buffer and electrical panel Serial: 40000001748 Estimated weight: 100 kg Approximate dimensions: 1300X700X1900 mm Auction-ID: A7-46655-23

600W Auction-ID: A1-45502-162

OM Carrelli CTX i 14 – Electric stacker / pedestrian stacker General data • Machine type: Electric stacker / pedestrian stacker • Manufacturer: OM Carrelli • Model: CTX i 14 • Year of manufacture: 2009 • Load capacity: 2,000 kg • Operating hours: approx. 6,297 h • Condition: used ⸻ Technical equipment • Electric drive (24 V) • Initial stroke (free lift) • Driver's stand platform • Side protection bars • Drawbar control • Battery with external charger • Forks for pallet handling • Mast with protective grille ⸻ Condition • Optical condition: used, signs of wear due to age and use • Technical condition: functional Ideal for in-house transport and warehouse work with high load capacity. Auction-ID: A7-46432-2037

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-4665 ...

40L/min; Packing 845x695x640mm; 5651 Auction-ID: A1-46415-700

Professional device 200 dpi; high-speed processor for precision printing; stand-alone use, PC or network application. Printing width 104mm; Printing speed 250mm/ sec.Serial: 5954505 Estimated weight: 12 kg Approximate dimensions: 500x700x700 mm Auction-ID: A7-46655-63

Estimated weight: 3 kg Approximate dimensions: 300x200xh150 mm Auction-ID: A7-46655-194

Power supply voltage: 220 V; installed power: 220 W; mixer motor power: 0.18 Kw; number of hoppers installed: 2; production: 30 Kg/h; hopper capacity: 18 Lt x 2; mixing chamber capacity: 7 Lt.Serial : 950000002663 Estimated weight: 170 kg Approximate dimensions: 1200x800xh1000 mm Auction-ID: A7-46655-43

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-699

Maximum temperature: over 85° C; heating power: 6 - 12 Kw; Pump power: 0.75. Serial: 74 Estimated weight: 130 kg Approximate dimensions: 1200x800xh1800 mm Auction-ID: A7-46655-40

table adjustable 0-45°, including 4 sanding drums Auction-ID: A1-45502-67

Very well maintained DAF CF (2009) with Palfinger crane. Always correctly maintained and technically in good condition. Reliable and immediately deployable crane truck Auction-ID: A3-44484-5690

5-layer feedblock Power: 9.6 kW. Approximate weight: 500 kg Approximate dimensions: 1200x800x1000 mm Auction-ID: A7-46655-50

Power: 2 x Volvo Penta D4-225; total ~450 hp (330 kW); diesel; sterndrive Operating parameters: Engine hours ~300 h; length 9.21 m; beam 3.56 m; class 10 m cabin cruiser Workpiece capacity: Up to 6 berths; cockpit + cabin layout (forward berth + mid cabin) Supported edges: Coastal & leisure navigation Edge types: Recreational cruising; sport navigation Included equipment: Raymarine navigation; GPS + autopilot; bow thruster; electric anchor windlass (remote); hydraulic gangway (pasarela); hardtop extension; cockpit table + convertible sunbed; 2 refrigerators; interior galley w/ gas hob; hot water boiler; shore power 220 V; solar charger; swim platform + ladder Compliance: CE pleasure craft (typ.); EU registration N/C Power supply: Diesel engines + 220 V shore power Year/Manufacturer: 2008 / Cranchi (IT) – Zaffiro 32 Sport cruiser 9.2 m with twin Volvo Penta engin ...

Supply voltage: 220 V, 50-60 Hz; installed power: 500 W; with dedicated PC. Serial: TCC 2001078 Estimated weight: 100 kg Approximate dimensions: 1200x800xh1500 mm Auction-ID: A7-46655-195

Pressure: 200 mBar Flow rate: 300 mc/h Approximate weight: 300 kg Approximate dimensions: 1300x800x1200 mm Auction-ID: A7-46655-54

Battery from 2016 With 4 functions up to the fork carriage With new spoons 2 meters long With suspension seat With power steering With good ties With good battery Leak-proof Viewing by appointment Auction-ID: A1-40252-125

Oxilating Auction-ID: A1-45502-72

Management of nr. 56 zones; microcontroller: TH-SYNC; output voltage: 230 V; temperature range: 0-400° C; Thermocouple cables not included, resistor not included. Serial: CC060150 Estimated weight: 90 kg Approximate dimensions: 1200x800xh1400 mm Auction-ID: A7-46655-35

40L/min; Packing 845x695x640mm; 5651 Auction-ID: A1-46415-701

Equipped with nr. 2 material trolleys, loading platform, new spare gasket for the door. Internal compartment volume: 1.5m³; internal measurements: 1000 x 1000 x h 1500mm; internal capacity: 400 Kg; Rated temperature: 250° C; maximum absorbed power: 29 Kw. Serial: 90256 Estimated weight: 1200 kg Approximate dimensions: 1800x1500xh2550 mm 1400x1200xh1000 mm Auction-ID: A7-46655-55

Equipped with a Rovatti F33K100H” 3-stage pump (2024), Iveco” diesel engine, support legs, retractable drawbar. Auction-ID: A1-46064-12

Capacity: 2000 Kg Serial: CE230202 Estimated weight: 5500 kg Approximate dimensions: 3400x1200x2700 mm Auction-ID: A7-46655-5

Complete with additional brush-grinding wheel and polishing wheel Auction-ID: A1-45502-135

Including N°2 current disconnectors: Power: 24 Kw Current: 400 A Power: 24 Kw Current: 630 A.Estimated weight: 850 kg Approximate dimensions: 1300X1100xh2300 (2X) mm Auction-ID: A7-46655-184

Double-hand operation, Drilling capacity 0-20mm Auction-ID: A1-45502-166

165000 km License plate: CA024GP Estimated weight: 2500 kg Approximate dimensions: 3600x1800x1600 mm Item sold ONLY in ITALY. Auction-ID: A7-46655-6

12v connection; 36l/min; 22A; 260W; Auction-ID: A1-46415-704

Equipped with 2x hydraulically foldable haulm toppers, height-adjustable gauge wheels, PTO drive, 2x 1800 mm working width, three-point linkage. Auction-ID: A1-46064-23

12v connection; 36l/min; 22A; 260W; Auction-ID: A1-46415-705

Equipped with a height-adjustable tow eye, hydraulic support leg, slewing ring, tandem chassis, turbine drive, gearbox, irrigation computer Irridoseur”, battery with solar charger, support legs, sprinkler car with adjustable track width. Auction-ID: A1-46064-7

Air flow rate: 1.8 m3/min with pressure 7 bar Refrigerant gas: R 134 Estimated weight: 70 kg Approximate dimensions: 600X600X1000 mm Auction-ID: A7-46655-17

Capacity: 2500 Kg; Lifting height: 3800mm, integral travel: 980mm. Serial: A416A02680C Estimated weight: 5000 kg Approximate dimensions: 3500x1300x2400 mm 600x600x900 mm Auction-ID: A7-46655-3

Hinged Lid Sight Glass Thermometer Auction-ID: A1-46529-3107

Telescopic boom forklift with maximum capacity: 3000kg, maximum lifting height: 41000mm. Serial: 1175493 Estimated weight: 5000 kg Approximate dimensions: 2800(without forks)x1300x2350 mm Auction-ID: A7-46655-2

with Netmak ST 4 feeder. including pallet with accessories Auction-ID: A1-45502-86

welding current range: 200A-35%, including welding cables Auction-ID: A1-45502-68

CYBELEC V-DNC-1200/B DNC 1200 Ps/B, working lengh - 4100mm, pressing force - 150 ton, max. stroke - 415mm, max. closing speed - 200mm/s, pressing speed - 1-10mm/s, Auction-ID: A7-46486-4

Control: Heidenhain iTNC 530 Speed: 10,000 rpm Travel in X/Y/Z: 1,050/540/720 mm Spindle: Technology: Belt spindle Speed: 10,000 rpm Power: 12 kW Tool holder: SK40 Work table: Clamping area: 1,120 x 610 mm Table load (max.): 1,000 kg General: Tool magazine: 30 stations Rapid traverse in X/Y/Z: 36/36/30 m/min Equipment/accessories: Chip management: Chip conveyor Coolant management: IKZ pump with filter and high pressure Setup operation: Electronic handwheel Other accessories: Div. gebr. Tool holder and 3 pcs machine vices (1x 125/2x 160), rinsing gun Auction-ID: A7-46660-102

Spindle diameter: 580 mm Tailstock stroke: 570 mm Turret stroke: 150 mm Machine not working, FANUC power unit NEEDS REPLACEMENT Sale intended only for revampists or scrap dealers Auction-ID: A7-46538-32

Management of nr. 2 zones; microcontroller: 1500W Incatronic AL 1; output voltage: 230 V; Temperature range: 0°-400° C.Estimated weight: 7 kg Approximate dimensions: 300x200xh200 mm Auction-ID: A7-46655-36

Clamping force: 200 Ton; piston closure; column passage: 520x520 mm; screw: 55mm; selogic control; Nr. 1 hydraulic jacks; Nr. 1 bellows; Euromap 12. Serial: 178453 Estimated weight: 6700 kg Approximate dimensions: 5500x2000xh2200 mm Auction-ID: A7-46655-25

Auction-ID: A1-45502-223

Equipped with 540/540e/1000 rpm PTO, front weights, hitch linkage, Fender controls, air brake connection, K80 lower drawbar hitch, airco, Auction-ID: A1-46064-6

Consisting of a trailed machine, equipped with 3x 1500 mm sieve beds, rubber-coated cross bar conveyor (500 mm), axle steering, hydraulically width-adjustable discharge conveyors. Note: control box not present, Currently not operational Auction-ID: A1-46064-36

brand: Bi-Matic ; type: Challenge 4.2; year: 2006; serial number: 4905; panel thickness: 40mm; edge tape thickness: 2 mm; Min. workpiece length: 70 mm; throughput: 7 m/min; connection: 400 V; Handbook available: yes; machine weight: 700 kg; size L: 3000 mm; size W: 825 mm; dimensions H: 2300 mm; description: equipped with digital control panel ; 2 x milling unit Auction-ID: A1-45502-2

Equipped with 540e/1000 rpm PTO, stub axles, wheel weights, hitch linkage, fender controls, K80 lower drawbar hitch, LED work lights, air brake connection, air conditioning Auction-ID: A1-46064-4

Diameter of the plate: 1650mm , useful height of the column: 2200mm various programs available Serial: KN/051386 Estimated weight: 500 kg Approximate dimensions: 3500x1700x600h mm Auction-ID: A7-46655-95