wd 200 used for sale

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3469

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/4xJHbE9sQV0 - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 10/04/2017, 24V 3PzS 345Ah, very good performance measured with 25.1V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-466

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/YA0qK5c_LvY - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 2020 24V 4PzS 500Ah, good performance measured with 24.7V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-349

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/LjptB6YDkRQ - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery:05/2016 24V 5PzS 625Ah, very good performance measured with 24.9V - Triplex mast with full free lift - 3rd valve, sideshift - Roof pane - Warning light orange - Comfort seat Auction-ID: A1-45451-115

does not start, drive defective - lights missing - 801h - can be loaded for transport Auction-ID: A3-43524-10004

Type: Coupé Year of production: 2004 Mileage: 311,000 km Engine capacity: 2148 cm³ Power: 150 HP Fuel type: Diesel Transmission: Manual Number of doors: 3 Color: Burgundy (Bordowy) VIN: WDB2037081A712156 Auction-ID: A7-46319-23

Youtube function and status video: https://youtu.be/lYqQRQ0mabk Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: 11/10/2019 24V 5PzS 625Ah, with very good performance; measured with 25.03V - Trplex mast with full free lift - 3rd valve; Sideshift - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45451-192

General information: • Brand: Saelens • Type: S3500D • Year of construction: 2004 • Chassis number: 2600002TZ / 53 • PVG number: R00446 • Type-approval number: R/00360 Technical specifications: • Number of axles: 2 • Suspension: Mechanical • Tare (mass ready to drive): 1,660 kg • Maximum Gross Vehicle Mass (GVW): 2,600 kg • On the certificate of conformity: 3,500 kg HTG • Coupling: KNOTT K17-A (4-ball coupling) • Permissible nose weight: 150 kg • Permissible axle load: 2 × 1,600 kg • Braking system: Unbraked in MTM 0, braked at higher MTM • Color: Not specified in the documents Registration details: • Date of first occupation: 02/04/2004 • Last registration in DIV: 09/08/2011 Auction-ID: A3-44483-11708

Opel Combo light truck Isuzu diesel Compact van with strong Isuzu engine. Specifications 1.7 diesel 1870 cc Euro 3 1 + 1 seats 155150 km 29/03/2001 Chassis number W0L0SBF25130253 State Starts and drives Lots of rust Exhaust defective Ignition switch problem temporarily solved Battery faulty Standing still for a long time Extra Mechanically simple Good for project or export Important information Vehicle sold in current condition without warranty. Start and drive does not guarantee roadworthiness or long distances. Description is indicative and non-binding. . Auction-ID: A3-44483-11909

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/3eb8PQxBTuk - Former Linde full-service device - Battery: 44/2023 48V 375Ah, very good performance measured at 25.8V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-367

ATTENTION! Vehicle is in Poland but can be brought to BE by seller for a fee! Auction-ID: A3-43524-13001

Machine Vise Dimensions of elongated holes on the side: 460 x 14mm Dimensions of slotted holes at the front: 250 x 14mm Jaw width 200 mm Clamping range 210 mm Clamping height 55 mm Weight 34.5 kg Condition: never used / new (5) Auction-ID: A7-46460-615

Please note the machine needs to be collected on Tuesday 26th May. Seller can assist with loading with prior notice if required. Full machine specification can been viewed on the PDF link. This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-46471-1

MERCEDES-BENZ C 220 CDI (W203) – Sedan General data: VIN: WDB2030071F470141 Body type: Sedan Number of doors: 4 Mileage: 361000 km (German registration) Engine: Type: Diesel, turbocharged Displacement: 2148 cm³ (2.2 CDI) Engine code: OM646 Cylinders: 4 (in-line) Power: 90 kW (122 HP) Torque: approx. 270 Nm Drivetrain: Drive: Rear-wheel drive (RWD) Gearbox: Manual Performance: 0–100 km/h: approx. 11.5 s Top speed: approx. 200 km/h Fuel consumption (combined): approx. 5.5 – 6.5 l/100 km Dimensions: Length: approx. 4526 mm Width: approx. 1728 mm Height: approx. 1426 mm Wheelbase: 2715 mm Weights & capacities: Vehicle weight: approx. 1450 – 1500 kg Fuel tank capacity: 62 L Trunk capacity: approx. 455 L Description: Mercedes-Benz C-Class (W203) sedan equipped with a reliable OM646 diesel engine. Suitable for everyday driving and long-d ...

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/BeUnCendmDs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 08/2021 24V 3PzS 375Ah, very good performance measured with 25.3V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-306

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/0X9SfMVZ7Do - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 24V/3PzS/375Ah, good performance measured with 24.5V Auction-ID: A1-45451-345

Industrial tray sealer from the renowned brand Reepack, suitable for packaging vegetables, fruit, meat and other food products. This machine is equipped with a conveyor belt and film system and can be used for gas packaging (MAP) in addition to standard sealing, which significantly extends the shelf life of products. The machine has a user-friendly ESA control with adjustable parameters such as temperature and process settings. Application: Packaging of vegetables, fruit, meat, fish, meals - Functions: Sealing trays with foil, Possibility of gas packaging (MAP – Modified Atmosphere Packaging), Automatic and manual mode, Conveyor belt infeed and output, Foil roll holder on top - Control: ESA VT60 display/controller, Adjustable temperature and parameters, Emergency stop present - Technical data: Power supply: 400V, Frequency: 50 Hz, Phase: 3~ Current: max. 22 A - Components: Vacuum pump: ...

-Front linkage -Front PTO -Top link in the front -Hydraulic top link at the rear -DW valve in front -4DW rear valves -Adjustable tow bar -Air brakes -Oil brakes -PTO 540/750/1000 -Reversing device -No documents Auction-ID: A3-43524-30087

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/D-cJO92WeE0 - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery:08/03/2024 24V 3PzS 375Ah, very good performance measured at 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-322

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/x3tg9I5ps6k - Former Linde full-service device - Battery: 44/2023 48V 375 Ah, very good performance measured with 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-318

Air conditioning Cab suspension Charger 2022 6 cylinders Auction-ID: A3-43524-39067

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug officially for batteries with 300-500Ah, but works up to 800Ah Delivery by freight forwarder possible on request. Auction-ID: A1-45451-4850

Bolzoni Auramo side shift fork positioner, front work lights, flash light, gold edition Auction-ID: A3-43525-280

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Lxz-e8CnyB4 - Former Linde full-service device - Battery: 44/2023 48V 375Ah, very good performance measured at 25.4V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-311

Power: 80 kW (~109 hp); 1.6 gasoline; 1,587 cm³ Operating parameters: Manual gearbox; mileage 146,000 km; VIN VF33BNFUC83742922 Workpiece capacity: 2 doors; cabriolet (CC, retractable hardtop); 4 seats Supported edges: N/A Edge types: N/A Included equipment: Standard road equipment (details N/C) Compliance: EU road approval Power supply: Gasoline Year/Manufacturer: 2004 / Peugeot – 307 CC Remarks: Used condition; petrol engine with manual transmission; convertible body version Compact 2-door convertible with 1.6 petrol engine and retractable hardtop. Auction-ID: A7-46319-22

Double bench grinder: Grinding grit: 36 and 80 Grinding wheel diameter max. 200 mm Grinding wheel width 32 mm Mounting diameter 30 mm Connection voltage 230 V Motor power 0.9 KW Condition: never used / new (5) Auction-ID: A7-46460-602

• Max. permissible mass: (GVW) 44,000 kg • Axle loads: 3 × 9,000 kg • Fifth wheel pressure: 17,000 kg • RDW Proof of conformity available • NL registration • Permission to drive by road until 13/01/2026 Attention! Central belt of tipper on the left side is flat! Needs to be replaced! Auction-ID: A3-44483-13571

Brand: Atlas Copco Type: GA37 VSD Serial Number: API57877 Year of construction: 2008 Power: 37 kW Max pressure: 13 bar Flow rate: ± 7.25 m³/min Voltage: 400V – 3 phase Speed: ± 3730 rpm Weight: ± 1075 kg Extra info (very important!) Operating hours: 39,627 hours Last service: 30-07-2024 Auction-ID: A3-43525-11843

Peugeot Bipper light truck 1.4 HDI Compact and economical city van. Specifications 1.4 HDI 50 kW Euro 4 ± 167000 km 27/07/2009 first owner State No keys Not tested Rear window left broken Rust present Extra Good for parts or project Important information Vehicle sold in current condition without warranty. Start and drive does not guarantee roadworthiness or long distances. Description is indicative and non-binding. Auction-ID: A3-44483-11907

Year of production: 2002 Mileage: 156,000 km Engine capacity: 1397 cm³ Power: 44 kW Fuel type: Petrol Transmission: Manual Number of doors: 5 Number of seats: 5 Color: Gray VIN: TMBNH26Y523544924 Auction-ID: A7-46319-31

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/YM1lDvoA_EE - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery:07/05/2019 LI-ION 24V/410Ah, very good performance measured at 25.5V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-310

Type: Pneumatic press for furniture fittings Operating pressure: 6 bar Electrical supply: 230V Motor power: 0.75 kW Auction-ID: A7-46477-13

New hydraulic motor New shock absorbers New air cushions Brake pot Recent tires Gable and full floor revised The front axle ring (ball ring) less than 1 year old Ready to ride Auction-ID: A3-43524-35508

Machine type: Edgebander Manufacturer: Homag Model: KF 61/07/QA/25 Year: 2004 Serial number: 0-202-25-9459 Technical data: - Application: Edge banding of chipboard and MDF panels - Machine type: Throughfeed edgebanding line - Workpiece thickness: approx. 8 – 60 mm - Feed speed: infinitely variable up to approx. 40 m/min Electrical data: - Voltage: 380 V - Frequency: 50 Hz - Phases: 3 + N Equipment: - Industrial edgebanding system for furniture production - Rolling chain transport system - Suitable for continuous production lines Remarks: Machine used in industrial woodworking environment; functionality not checked, sold \"as is\". Own mass: approx. 6000 kg Dimensions (LxWxH): approx. 11500 x 3000 x 2000 mm Auction-ID: A7-46477-3

Perfectly working 2 axle Chieftain. Can be used for: sand and gravel, sifting coarse material, construction and demolition waste, compost and biomass and agricultural applications. This sorts materials by size so that you can make pure soil, reusable stone/gravel fractions and separate waste into usable streams. Auction-ID: A3-43524-7842

BMW X5 4.4i (E53) – SUV General data: VIN: WBAFB31090LG95260 Model: X5 4.4i (E53) Body type: SUV Number of doors: 5 Mileage: 405000 km (Dutch registration) Engine: Type: Petrol, V8, naturally aspirated Displacement: 4398 cm³ (4.4) Engine code: M62B44 Cylinders: 8 (V configuration) Power: 210 kW (286 HP) Torque: approx. 440 Nm Drivetrain: Drive: Permanent all-wheel drive (4x4) Transmission: Automatic Performance: 0–100 km/h: approx. 7.5 s Top speed: approx. 230 km/h Fuel consumption (combined): approx. 13 – 15 l/100 km Dimensions: Length: approx. 4667 mm Width: approx. 1872 mm Height: approx. 1715 mm Wheelbase: 2820 mm Weights & capacities: Curb weight: approx. 2050 – 2150 kg Fuel tank capacity: 93 L Luggage capacity: approx. 465 L Description: BMW X5 4.4i (E53) SUV equipped with a powerful V8 engine and permanent all-wheel drive  ...

FEM3 mount, for forklifts with 2,500kg-5,000kg load capacity on pallet for loading into trucks FEM dimension 3A Fork length 135-200 mm Auction-ID: A1-45451-1103

Hydraulic Machine Vise Jaw width 125 mm Clamping range 200 mm Clamping height 40 mm incl. turntable Weight 55 kg Condition: unchecked (6) Auction-ID: A7-46460-568

Roll width 400mm Runway length: 2000mm Roller conveyor height 750 - 1000mm Weight 80Kg Auction-ID: A7-46460-468

can be loaded with forklift Auction-ID: A3-43525-11836

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/vSWYzek0rNs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 20/10/ 2020, 24V 4PzS 500Ah 24.9V , good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-319

CNC Machining Center Vertical - 30-fold tool changer - Handwheel - Chip conveyors - Belt filter system - some SK40 tool holders System can be dismantled to 2.45m. x-travel 2000 mm y-travel: 620 mm z-travel 520 mm Control Heidenhain TNC CNC Speed range - main spindle max. 15000 rpm/-1 Tool holder BT 40 Table clamping surface: 2500 x 550 mm Tool changing device 30-fold Connected load 25 KVA Weight 10.5 t Dimensions LxWxH 8.0 x 2.6 x 2.75 m Auction-ID: A7-46460-415

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/82BmNy9__DY - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 44/2023 48V 375Ah, good performance measured at 24.6V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-370

Year of construction 06 / 2024 REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3579

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Former Linde full-service machine Attention: without battery Auction-ID: A1-45451-458

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video:https://youtu.be/EV6gEyoyvAM - Former Linde full-service device - Service valid until 03/2027 - Battery: 09/2020 24V 4PzS 500Ah, very good performance measured with 24.9V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors Auction-ID: A1-45451-371

Youtube function and status video: https://youtu.be/KAoDSuEIAvc - Former Linde service device - Next service only in 457 hours - UVV valid until 01/2026 - 3rd + 4th valve; Fork adjuster 22-148 cm with sideshift Auction-ID: A1-45451-165

Machine type: CNC drilling machine Manufacturer: Biesse Model: Skipper 130 Year: 2008 Serial number: 04671 Control: BiesseWorks CNC system Application: CNC machining center for wood panels (drilling, milling, grooving) Technical data: - Working area (X/Y): approx. 3000 x 1300 mm - Workpiece thickness: 8 – 90 mm - Min. workpiece size: approx. 90 x 70 mm - Drilling spindles: 31 + 31 vertical (top & bottom) - Horizontal spindles: 8 + 8 (X direction), 2 + 2 (Y direction) - Max. spindle speed: 6000 rpm (drilling), up to 24,000 rpm (electrospindle) - Main motor power: approx. 4.5 kW (electrospindle) - Total installed power: approx. 22.5 – 24 kW Working capabilities: - Simultaneous machining on top and bottom sides - Processing of all 6 sides in one pass - Drilling, milling, grooving and dowel operations - Automatic panel measurement and thickness adjust ...

start, drive and execute what it needs to do General information Brand: John Deere Type: 6310 SE Vehicle category: Agricultural tractor Fuel: Gasoil (diesel) Identification Chassis number (VIN): L06310V333249(01) License Plate: GLYP494 Document number: 565193467 Data Date of first admission/registration: 10/04/2002 Last registration: 03/03/2014 Weights Permissible max mass: 5320 kg Front axle: 2220 kg Rear axle: 3100 kg Hours Approximately 7419 hours Auction-ID: A3-43524-11888

Type: Sedan Year of production: 2008 Mileage: 179,000 km Engine capacity: 1364 cm³ Power: 66 kW Fuel type: Petrol Transmission: Manual Drive: Front-wheel drive Number of doors: 5 Number of seats: 5 Color: Silver (Srebrny) VIN: W0L0TGF488G114630 Auction-ID: A7-46319-29