wd 200 used for sale

Key data: 2000 kN

Bilion H470-200T Select / Electric machine / Production line with the Wittmann W823 robot Year of manufacture: 08.2018 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit : Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: energy-saving and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air Valve x 5 Core train control Air Core Pull x 3 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Proportional valve on the in ...

Key data: 2000 kN

Arburg 570H 2000-400 e² / Hybrid machine / Production line with the Wittmann W823 robot / Operating hours: h in automatic mode Year of manufacture: 07.2016 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: energy-saving and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air Valve x 5 Core train control Air Core Pull x 3 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inver ...

Key data: 2000 kN

Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp It is possible to buy a turntable for an extra charge Dimensions: Weight: 7300 kg All offered machines are started by our service technicians before they ar ...

Heavy-duty scale, scale, parcel scale, weighbridge, floor scale, pallet scale, platform scale, drive-through scale, vehicle scale, drive-through scale -Manufacturer: OAS, Heavy-duty scale, floor scale, pallet scale, bar steel scale -Type: SWT -Weighing range: up to max. 1500 kg -Platform: 2000 x 1500 mm -Transport dimensions: 2000/1500/H360 mm -Empty weight: 310 kg

turning diameter: 540 mm turning length: 1020 mm control: FANUC 18 i-TB swing diameter: mm bar diameter: 65 mm travel -x axis: 555 / 185 mm travel -y axis: 160 mm travel -z axis: 1095 mm travel -z axis (sub spindle): 1065 mm spindle speed:: 5000 / 5000 1/min spindle bore: 76 / 76 mm C-Axis: 360 x 0,001°/360 x 0,001° turret head: BMT 65P / 12 Pos. milling spindle turning speeds: 10000 U/min Driven Tools: 4.000 U/min b-axis: 240 ° rapid traverse X-axis: 24 m/min rapid traverse Z-axis: 24 m/min drive capacity - spindle motor: 22 / 22 kW voltage: 400 V toolpiece magazine: chain magazine: 40 Pos. tool taper: HSK-A 63 milling drive: 15 kW driven Tools: 5,5 kW total power requirement: 60 kVA weight of the machine ca.: 12,5 t dimensions of the machine ca.: 4,30 x 2,30 x 2,90 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: GSX 2000-4/2.7/1 Load capacity: 2,000 kg Projection (A): 3,000 mm Total height (H1): 2,900 mm Hook height (H2): 1,800 mm Year of construction: 2004 Swivel version: manual Electric chain hoist Manufacturer: LIFTKET Load capacity: 2,000 kg Lifting speed: 2.5 / 10.0 m/min Lifting height: approx. 5 m Voltage: 400V Year of manufacture chain hoist: 2006

Crimper Manufacturer: Pamasol Type 2002/20 Capacity: 500-700 containers/hour The machine works pneumatically and is started with the two-hand solution. The crimping knife and the crimp height can be adjusted to the desired dimension from the outside. Before closing the container, the machine presses the verntile onto the container with the set contact pressure. The contact pressure can be adjusted separately. Scope of application: container height 30-330 mm, container diameter 22-66 mm Operating pressure 8-10 bar Weight 75 kg Dimensions: 700 x 700 x 1000 mm

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

Stock No.: 4053 MACHINING CENTER Manufacturer: EMCO, Type: MMV 2000 Serial No.: M-20906019, Year of manufacture: 2017 Specifications: Table size 2400 x 950 mm Large table load 2200 kg Longitudinal movement (X) 2000 mm Transverse movement (Y) 800 mm Vertical movement (Z) 750 mm Spindle taper SK 40 ISO Spindle speeds 50-15000 rpm Spindle motor 46 B-axis angle +/- 120 angular degrees Tool Changer 40 Control Siemens 840 D SL Controlled in axles 4 Operating hours spindle 4488 hours Accessories:                             Cooling by spindle 20 bar Chip conveyance.                      Tool Measuring                      Dimensions: Length: 2886 mm, Height: 3277 mm, Width: 4450 mm, Weight: 22 kg

Key data: 280 mm, 365 mm, 2240 U/min

Circulation over bed 560 mm Wire diameter over carriage 365 mm Turning length 2000 mm Spindle head DIN 55027 Front bearing 100 mm Spindle bore 62 mm Spindle speed 11.2 - 2240 rpm Spindle motor 15 KW Face slide travel 345 mm Upper slide travel 125 mm Bed widthw 360 mm Quill cone i. tailstock 5 MK Quill diameter 80 mm Quill stroke 190 mm Thread pitches 0.125 - 112 mm Machine weight 4500 KG Dimensions 3.5 x 2.0 x 2.2 m 3-axis digital display 3-jaw chuck 1 roller bezel MULTIFIX steel holder Sleigh rush walk Equipment for Metric, Inch, Module & Diametrical Pitch Threads Geometric overhaul in 2023, little used, excellent condition!

Electric motor Manufacturer: VEM Product number: K21R 200L4 TWS HW 37 kW 1500 rpm The engine is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details. Internal number: 603 791

Dry Transformer Manufacturer: Schneider Type: DLPS 63E The device is NEW and fully functional. see pictures for more details.

Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----------------------------- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center hole ...

Electric motor Manufacturer: VEM Product number: K21R 200L4 TWS HW 30 kW 1405 rpm The engine is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details. Internal number: 603 790 257398546147

Second-hand automatic planing and grooving machine, part of a Weinig Hydromat 2000 pre-planing line, with feed mechanism (tilting destacking). The machine has already been dismantled and is ready for loading. The images contain AI-generated sample images for illustrative purposes. The illustration may contain errors. Technical data: Spindles: 5 Spindle 1: Bottom / 11 kW / 50 mm / 6,000 rpm Spindle 2: Left / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 3: Top / 18.5 kW / 50 mm / 6,000 rpm / Jointer Spindle 4: Bottom / 11 kW / 50 mm / 6,000 rpm / Jointer Spindle 5: Right / 11 kW / 50 mm / 6,000 rpm Working width: 175 mm Working height: 80 mm Feed: 15 kW / 100 m/min Control: CNC memory system Max. workpiece length: ~ 6,000 mm Condition: Gebraucht Location: Prag, Tschechien

sheet width: 2020 mm plate thickness: 3.0 mm thickness at Niro-steel: 2.0 mm bending angle max.: 135 ° stroke of upper beam: 250 mm Swing beam adjustment: 80.0 mm Control: POS 2000 back stop - adjustable: ca. 1.000 mm total power requirement: 6.0 kW weight of the machine ca.: 3775 kg dimensions of the machine ca.: 3850 x 2250 x 2250 mm Original price at the time: approx. 70.000 Machine from a maintenance workshop Special price upon request (!) Features: - Robust, electric-motor-driven CNC swivel bending machine - dynamic, high-performance drive motors - SCHRáDER POS 200 CNC control unit touchscreen control panel fast programming of individual parts programming of bending sequences Tool and bending program library Graphical and numerical display - Swiveling control panel, front right - CNC electric-motor-driven material/backgauge With rear sheet metal support surface (stainles ...

turning diameter: 620 mm turning length: 2000 mm control: MSX 501 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SAMSYS MUS 2000 / Bar Loading Magazine -CE marking -Year of manufacture 2000 -Country of origin: Switzerland -Bar diameter 5 - 80mm -Rod lengths 250 - 1550mm -Longitudinal movement 600mm -Height adjustment 775 - 1175mm Dimensions: LxWxH 2.2x1.1x1.7 meters / weight 500 kg

Description Item # 9396 - AUTOMATIC TRAY SEALER Manufactured by MECAPACK Model Meca 2003 VG Inox Year 2003 Completely refurbished & updated in 2017 by SODIMA Company 3m loading conveyor extension equipped with a variable speed drive and 1 emergency stop button (SODIMA) Tray denester with 1 magazine, 4-lane setup (SODIMA) Siemens automation system with touchscreen (SODIMA) 160 m³/h vacuum pump (SODIMA) 4-to-1 lane merging system for batch code printing (SODIMA) 1 set of 4-lane tooling sized for the trays (SODIMA) Products: 120 x 76 mm dual-compartment PP tray – fruit puree / biscuit Tray depths from 20 to 80mms Film width: 470 mm Cut pitch: 154 mm Machine core diameter: 76 mm Around 10-12 cycles per minute Line speed: 40 trays/minute (i.e., 2,400 trays/hour) Also including a FILLPACK Dual Dosing Unit Two Dosing Units, each up to 300cc Year 2017, Fruit pieces in compote for dosing unit  ...

Maximum speed: approx. 2.00 m/s Installation dimensions: approx. 19,000 × 1,500 mm Quantity: 3 pieces Price per piece

Country of manufacture: Japan Year: 2018 Controls: R-30iB Plus Number of axles: 6 Lifting capacity: 165 kg Reach: 2655 mm Repeatability: ±0.05mm Robot weight: 1090 kg

Key data: 3500 kN, 916 g/PS, 70 mm

1.0 PCS Injection moulding machine Manufacturer: NETSTAL Type: EVOS3500-2000 Year of Make: 2010 Clamping force: 350 tons Tiebar spacing: 730 x 730 mm Screw diameter: 70 mm Moulded part weight: 916 g/hp Equipment: Core slides 3 x DS / 2 x AS Interface Robot

Key data: 3500 kN, 916 g/PS, 70 mm

1.0 PCS Injection moulding machine Manufacturer: NETSTAL Type: EVOS3500-2000 Year of Make: 2009 Clamping force: 350 tons Tiebar spacing: 730 x 730 mm Screw diameter: 70 mm Moulded part weight: 916 g/hp Equipment: Core slides 3 x DS / 2 x AS Robot Manufacturer: SEPRO

Gimon RG1000.2000 Drum coating system Serial: 14214 2018, Stainless, consists of 1100L stainless hopper on weigh cells, feeds onto continuous conveyor scale, feeds into Gimon disc coater and into Gimon drum coater fat drum, also comes with 1000L stainless IBC previously used for oil,

ATS-Tanner US-2000 IBL-SM-E Banding Machine – Year of Manufacture: 2016 ATS-Tanner US-2000 IBL-SM-E banding machine (Swiss-made) featuring ultrasonic tape welding—a true all-rounder for banding a wide variety of products: from playing cards, raffle tickets, vouchers, and other printed matter to pharmaceutical package inserts and folding cartons, as well as food trays and convenience products. Technical Specifications Manufacturer: ATS-Tanner Banding Systems AG (Switzerland) Model: US-2000 IBL-SM-E Year of manufacture: 2016 Performance: Up to 30 cycles/min (depending on product and infeed) Welding system: Ultrasonic (no warm-up time, immediately ready for operation) Banding material: Paper or film tape, 30 mm tape width Arch size: 260 x 120 mm (base unit US-2000 AD) [adjust if necessary: 260 x 180 / 260 x 260 mm] Electrical connection: 200–240 V / 50–60 Hz Pneumatic connection: 6  ...

Technical data for the pallet racking system: Shelving system: META Thyssen Type: Multipal S Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 30,720 mm Number of fields per row of shelves: 11 pieces of 2,700 mm each Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row: 99 pcs. Total number of pallet spaces: 99 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg The scope of delivery includes: 12x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 85 x 75 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed  ...

General SKULY010 CEcheck MakeSartorius Stedim Systems Main Features MaterialStainless steel Volume200 Ltr. Motor7.5 KW Specified Features - Bioreactor Reactorsingle use bag reactor Capacity200 l Vessel sizesø 600 x 700 mm With jacketcheck Half coil jacketedcheck Speed mixing shaft150 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4306 (304L) General TypeBiostat STR 200 No.0065Y/16 Year of construction2019 With switch(as is) With switchgear(as is) Floorspace1 x 1,3 m Total height2 m Weight450 kg Extra SpecificationsWorking condition, turns on, have all passwords to the system and documentsAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIBio ...

CYL Gate Valve DN200 PN 10 Type: XDY12NDE-200EP010S6G The part is in a used condition, but this is a a used item that shows or may show signs of wear. Internal number: 628 275 398076109352

UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TN3000 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - diagonally positioned tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - with belt transport - Length 3.000 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/ - 5%

with powered roller conveyor as a folding table, length 500 mm Technical specifications: - Manufacturer: Celfa - Year 1998 - Model: TTE 2000 - Year of manufacture: 1998 - Working width: 1,300 mm - Overall width: 1,580 mm - Length: 2,000 mm (1,500 + 500 mm) - Working height: 930 mm ±20 mm - Bar diameter: 25 mm - Chrome -plated bars - Bar spacing: 95 mm - Roller spacing on folding table: 115 mm - Feed speed 2,1 - 12,3 m/min. - Feed speed adjustable, handwheel - Motor power, drive: 0.26 kW Exx -d - Volts / Hz: 400 V / 50 Hz - Feed speed: approx. 5–25 m/min. - Feed via handwheel adjustment - Location: in stock

UV dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445) mm - Working height: 900 ± 40 mm - Control panel on the right - Max. part height: 70 mm - Number of tubes from above: 2 - Straight -mounted tubes: 2 - Suitable for mercury tubes - Suitable for gallium tubes - Max. tube power: 120 W/cm - Bar transport - Length: 2,500 mm - Width 2,300 mm - Height 1,500 mm - Volts, Hz 400 / 50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/ - 5 % Images are examples of a machine of the same design

This Tetra Pak, Tetra Alex Modified 30 (TAM30A/200BAR) Aseptic homogeniser is a 3-cylinder machine with a maximum design capacity up to 18.100 ltr/h @ 200 bar maximum pressure. The current capacity with the current motor is set on 16.500 liter per hour at 200 bar. The homogeniser is equipped with 2-stages with mushroom valve cylinders. Hydraulic valves for pressure setting on the front panel. Piston diameter: 63 mm. Piston stroke: 130 mm. Manometer. Motor: 110 kW - 400 V - 192 Amp - 50 Hz - 1487 rpm. Oil pumping system inside the machine. Stainless steel cladded., Additional features:, Excluding:, - Control panel., Type of Machine: Homogeniser, Capacity: 16.500 liter per hour, Stages: 2 stages, Max. Pressure: 200 bar, Valve cylinder: Mushroom valves, Piston diameter: 63 mm, Motor: 110 kW - 400 V - 192 Amp - 50 Hz - 1487 rpm, Dimensions: 275 x 190 x 130 cm, Weight: 3.700 kg

: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 € : 480 € : 2050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7.5 kW : 800 mm : 530 mm : 2355 mm : 2720 mm : 1630 mm : 1230 mm : 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 16400 € : 314.88 € : 2050 mm : 3 mm : 35 1/min : 1.5 ° : 750 mm : 3 kW : 800 mm : 520 mm : 2720 mm : 1575 mm : 1230 mm : 1900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 2 cutting edges on the lower blade 800 mm squaring arm with scale 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 130600 € : 2468.34 € : 200 to : 1200 mm : 740 mm : 220 mm : 24 - 140 mm : 50 1/min : 950x600 mm : 100 mm : 390 mm : 15 kW : 2350 mm : 1700 mm : 3435 mm : 14900 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU200W006 MakeHPV LocationBarneveld TypeRV Base SO Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Specified Features - Inline mixer MaterialStainless steel 1.4404 (316L) General No.2002-M-1 Year of construction2013 With switchgear(as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO.with:IKA, type Dispax-reactor DR2000/5-ATEX, year 2013, motor 7,5kw, 400 ...

CONTROLS   PLC SIEMENS SIMATIC OP 47-12 PRESS FORCES   total force (nominal): 200 to PRESS TABLE   table surface (left-right): 2440 mm   table surface (front-back): 1500 mm SLIDE   table surface (left-right): 1500 mm   table surface (front-back): 1100 mm   stroke: 180 mm SLIDE (MECHAN. PRESS)   slide adjustment: 150 mm   stroke rate (min.): 20 /min   stroke rate (max.): 120 /min   main drive power: 45 kW OVERALL SPECIFICATIONS (COIL LINES)   sheet thickness max.: 2.5 mm DECOILER   sheet width max.: 300 mm   sheet width (min): 30 mm   coil weight max.: 3 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet width max.: 30 mm   sheet width (min): 300 mm   number of leveller rolls: 9   diameter of leveller rolls: 30 mm   number of intermediate rolls: 11   feed  ...

sheet width: 2050 mm plate thickness: 6.0 mm cutting angle adjustment: 0.5 - 3.0 ° down holder: 12 Stück no. of strokes: 8 - 14 Hub/min back stop - adjustable: 750 mm work height max.: 770 mm Control: konv. total power requirement: 7.5 kW weight of the machine ca.: 3800 kg. range L-W-H: 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition () Features - Robust, slide-guided electro-hydraulic panel shear - HACO control panelâfront left Easy operation directly at the cutting table Adjustment of cutting angle and backgauge Emergency stop button, latching - Electromotor-driven material stop/backgauge Fine adjustment with handwheel (front left) - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front Eccentric adjustment - 1x long side stop - Front finger guard - 1x freely movable foot switch - Rear sheet metal chute - Operating i ...

Morgana Plockmatic BM 2000S Digital Booklet-Making System - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Morgana Plockmatic BM 2000S Digital Booklet-Making System Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Morgana Plockmatic BM 2000S Digital Booklet-Making System Price: 11000 EUR Download PDF Morgana Plockmatic BM 2000S Digital Booklet-Making System The machine is in full working order and ready for production. A professional, automated booklet-making system from Morgana (part of the Plockmatic Group), designed for medium- to high-volume digital and offs ...

General SKU014F047 MakeMixaco Maschinenbau Neuenrade TypeCM-2000 D No.22.856 Year of construction1993 LocationBarneveld Main Features MaterialStainless steel Volume1600 Ltr. Motor90 KW Specified Features - Cold mixer Cold mixer:Container mixer: (1x) Capacity1600 Ltr, Useful capacity 800 Ltr Vessel sizesdia. 1500x750mm (brand new :OEM: vessel) With cover(jacketed) Outletdia. 300mm With motor90 KW, 380 Volt MaterialStainless steel 1.4301 (304) General With switchgear(as is) Floorspace3,2x1,8 M Total height3,0 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Technical specs Extra informationbrand new oem vesselAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDiscountDetergent & surf.Other pharmaceuticsCosmeticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicReconditionedTea, herbs & coffeeGeneric medicinesPowdered foodsCold mi ...

CNC bar-fed lathe, year 2005, CNC MSX 850. Used machine. More info & price on IndustrialBuyer.

multitasking turning center, year 2003, CNC MSC 501. Used machine. More info & price on IndustrialBuyer.

KOMORI LS 529 + Cx year 2007 A 5 Colors Offset press with Coater of size 53 x 75 cm (62 Mio. Imp.) Including : PQC with PDC-SII and Diagonal Cyl. Register, KHS, KomoriMatic Dampening with Technotrans Alpha.C with Ink Temp. Controlled, All Washers, S APC Auto. Plate Loading, CIP3, AMR BUT NO Automated Size settings at Delivery and Feeder, AMR Thickness Up to 0.80 mm Coating Unit Ductor Chamber TRESU, Extended Delivery with IR Dryer Baldwin IVT, Straight, Weko AP242 powder spray, Chromed Cylinders, Beil Puncher and Bender, 16 000 S/h. Machine in Good running order, Immediately available Can be seen running

B&A REF:  9259 TON: 370 SCREW DIAMETER:  70MM SHOT WEIGHT: 1060 STROKE VOLUME:  1175CM3 INJECTION PRESSURE:  1700AR PLATEN SIZES:  1070 X 990MM DBTB: 710 X 630MM MIN MOULD HEIGHT:  300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  710MM MAX DAYLIGHT:  1460MM EJECTOR STROKE:  275MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE:  HYDRAULIC

The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the bo ...

Transport rack, glass rack, storage rack, transport and storage rack, glass transport rack -Rack pool Europe: Transport and storage rack -Transportability: suitable for forklifts and pallet trucks, with crane lifting eyes at the top and bottom -Quantity: 1x frame available -Overall dimensions: 2000/1180/H2190 mm -Weight: 97 kg

Chiller - ToolTemp TT-20000 Description: Cooling capacity 20 kW Refrigerant: The device has: - 1 x Compressor - Circulating pump - Heat exchanges - coolers - 1 x Fan - Separate container for medium Medium: Water/Glycol The device after maintenance, fully functional 3-month operation warranty in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Compact roll line KÖNIG / LIPPELT, type: G 2000 -In bakery condition- For Kaiser rolls, long rolls, hot dog rolls, and normal round rolls. - Mini Rex 4000 TR/G head machine - Weight range: 35 - 85 g - Knitting drums: SKG58 and RK58 (for softer doughs) - Capacity head machine: max. 4,000 pcs./h - Proofer capacity: max. 2,500 pcs./h - Condition: Good - Ready for immediate use Visits and test runs are possible by arrangement.

Compact bread roll line KÖNIG, type: G 2000 -In very good bakery condition- For Kaiser rolls, long rolls, hot dog rolls, and normal round rolls. - Mini Rex Futura head machine - Weight range: 30 - 130 g - Condition: very good - Ready for immediate use Visits and test runs are possible by arrangement.