127,266 used machines on RESALE, but how to find them? Machine Search
Lippert roller conveyor Roller conveyor Alignment conveyor 2000-700-600 RA2250 Make: Lippert Roller width (RB): 600 mm Nominal width/outer width (NB): 700 mm Length: 2000 mm Roller diameter: 50 mm Distance between rollers: 76 mm Drive motor: SEW geared motor Electrical data: 380 V, 0.37 kW Frame height: 105 mm including motor: 400 mm Conveyor speed: please contact us Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: nominal voltage: 380-480 V condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides For individual, expert advice, s ...
Transnorm belt conveyor GF 2200-1120-1000 RA2391 Technical data: Conveying length (NL): 2200 mm Framework width (NB): 1120 mm belt width (GuB): 1000 mm Framework width including Motor (MB): 1500 mm height (BH): 110 mm Side guides height: 400 mm Drive: SEW gear Motor with Movi-Mot Conveying speed m/s: freely adjustable between 0.4-1.3 m/s Electrical data: 50Hz V380-500, kW 1.1 Optionally available: Supports Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2018 condition: good (used) Conveying length in mm: 2000 Nominal / outside width in mm: 1250 Belt width in mm: 1100 Driven: YES Engine type: SEW Eurodrive KW: 1,1/S1 Conveyor speed m / s: 0,5-1,5 scope of delivery: including side guides without supports, including Movimot frequency converter For individual, professional advice, simply contact us. Simply contact us by phone ...
Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Belt width (RB): 1000 mm Frame height: 150 mm Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable V 380-500 kW 0.4-4 Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch Features: Construction year: 2016 scope of delivery: including supports and side guides, Lichtschranken, Notausknopf angle: 30° Antrieb: SEW Getriebemotor mit MOVIMOT condition: Ausstellungsstück Belt width in mm (GuB): 1000 Electric data: 380-400 Frame width in mm (NB) ...
Manufacturer: MINOX Type: MTS 2000/1 Built in 1999 Surface: 2.5 m² Dimensions diameter: 180 cm Weight: 1200kg Space requirement: 240 cm x 240 cm Available quantity: 2 pcs. Condition: used, fully functional
WMW Niles Ø 1400 x 2000 mm Distance between centers: 2000 mm Swing over bed: 1400 mm Swing over cross-slide: 1100 mm Swing in gap: 1800 mm Diametre of main spindle bore: 90 mm Power on main spindle: 14 kW Number of speeds: 382 rpm Chuck (3/4 pinch) -- diametre: 1200 mm
Control: OSP-P200LA Turning diameter over bed: 400 mm Center spacing: 960 mm Turning diameter: 210 mm Speed: 50 – 6,000 rpm Sub-spindle speed 50 – 6,000 rpm Travel: Z-axis 700 mm W-axis 730 mm X-axis 205 mm C-axis: 360 degrees (0.001) Equipment: - 2 tool turrets with 16 slots each (all seats driven) - Touchsetter - IGF - -Conveyor - Bar loading magazine 3.00 m - Main spindle collet chuck - Sub-spindle three-jaw chuck - Parts catcher - Workpiece removal system -Aspirator - Coolant system with high-pressure pump, paper belt filter system
The machine is in good technical condition, testing possible after prior agreement. Table dimensions: 700 x 450 mm Z-axis travel: 255 mm Y-axis travel: 250 mm X-axis travel: 350 mm MACHINE DIMENSIONS: L: 2100 mm x W: 2000 mm x H: 2200 mm
Base machine CTX 200E with driven tools, C-axis and 1x back working. Includes DATAPILOT software package TurnPlus, cooling unit for control cabinet, hinge belt chip conveyor, discharge height: 1100mm including coolant tank, tool holder set for universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank holders, sealing plugs, reducing sleeves. Bar gripper, axial complete, workpiece pick-up device, tool spindles 3x axial for drilling/milling/tapping, 1x radial for drilling/milling/tapping, 1x for saw blades, collet chuck complete for main spindle, collet chuck complete for counter spindle, 17x DIN collets 173E round Ø 3-40mm, 2x DIN collets 173E, hex SW 7 and 12mm, 2x DIN collets 173E, square SW 8mm. Bar loading magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar loading magazine ...
Thermometer Gauge DK-T-6x12-1/2PT DENKI BIMETAL THERMOMETER MODEL: DK-6x12-1/2PT(0-200C) RANGE: 0-200C/F DIAL SIZE:6", STEMLENGTH: 12"
turning diameter: 750 mm turning length: 1520 mm control: FANUC 18i TB turning diameter over slide: 540 mm chucking diameter: 8 spindle nose: A2 #6 spindle passage: 76 mm spindle turning speed - stepless: 5000 U/min spindle drive: 22/18,5 kW milling spindle: milling spindle drive: 18,5 /15 kW milling head speed: 12000 U/min x-axis: 565 mm z-axis: 1550 mm y-axis: +/- 85 mm b-axis: 0,001 ° total power requirement: 56,7 kVA weight of the machine ca.: 13,8 t dimensions of the machine ca.: 5,9 x 2,5 x 2,8 m Equipped with: - FANUC Series 18i TB CNC control - Main & counter spindle - IKZ 20 bar - Tool magazine with 40 spaces - 3-jaw chuck The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Peak Model: Precision Hydrogen 200cc 100–230V Year of Manufacture: 2020 Type of Machine : Hydrogen generator Specifications: - Voltage: ~100/230V - Frequency: 50/60 Hz - Current: 6 Amps - Maximum Output Pressure: 100 PSI Find more here - / Contact us at -
turning length: 2000 mm centre height: 330 mm swing diameter over bed slide: 660 mm swing diameter over slide rest: 460 mm turning dia. in gap: 900 mm spindle bore: 105 mm turning speeds: 25 - 1600 U/min bed width: 400 mm spindle taper: 55029 D 1-8 taper in tailstock: 5 MK quill travel: 235 mm total power requirement: 7,5 kW weight of the machine ca.: 2900 kg. range L-W-H: 3630 x 1200 x 1520 mm Scope of delivery : - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinally and flatly - LED machine light - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 450 mm - Fixed bezel - Passage diam. max. 180 mm - Revolving bezel - Passage diam. max. 120mm - 2 centering points - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Initial filling with Shell Tellus 46 - Coolant device - Quick-change tool holder with 4 ...
width of the strips: 75.0 mm band length: 2000 mm band speed: 14.5 + 29 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3.0 kW 100% ED weight of the machine ca.: 67.0 kg range L-W-H: 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of deliv ...
weight max. in kg: 2000 kg table length: 1300 mm stroke height: 190-1010 mm table width: 800 mm stroke of worktool slide: 22 mm/sek. weight: 280 kg Furnishing: - For ergonomic work at the optimal working height - With closed platform - Separate control unit with 3 meter cable, control buttons and emergency stop switch - Stepless lifting and lowering - Stable powder-coated steel construction - Guaranteed stability - Circumferential safety strips - Meets the safety criteria of EN 1570 - High pressure cylinder with double safety function The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided 750 version with scale - Including 4x basic equipment The data for this ad was created with ModulMWS ...
table length: 2000 mm table width: 1000 mm table height (lateral area): 100 mm weight: 354 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including tool set of 16 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Plasma nitrided version with scale - Including 4x basic equipment - incl. 16 ...
turning length: 2000 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25 - 1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 180 mm quill:: 5 MK spindle bore: 105 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 2720 kg. Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Initial filling with Shell Tellus 46 - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Slip clutch - LED machine light - Change gears - Reduction sleeve - C ...
width of the strips: 150 mm band length: 2000 mm band speed: 14.5 + 29 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4.0 kW 100% ED weight: 84.0 kg range L-W-H: 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt ...
width of the strips: 150 mm band length: 2000 mm band speed: 29.0 m/sek grinding width: 460 x 150 Plantisch mm Dust suction hood: 100 mm total power requirement: 4.0 kW 100% ED weight of the machine ca.: 84.0 kg range L-W-H: 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...
width of the strips: 75.0 mm band length: 2000 mm band speed: 29.0 m/sek grinding width: 460 x 75 Plantisch mm Dust suction hood: 100 mm total power requirement: 3.0 kW 100% ED weight of the machine ca.: 66.0 kg range L-W-H: 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding ...
width of the strips: 100 mm band length: 2000 mm band speed: 15 + 30 m/sel tube diameter: 20 - 76 mm angle adjustable from - to: 30 - 90 Grad Dust suction hood: 2 x 75.0 mm motor speeds:: 1420 / 2660 Upm. face grinding attachment: 400 x 100 mm total power requirement: 2.5 / 3.3 kW weight of the machine ca.: 148 kg. range L-W-H: 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding ...
sheet width: 2035 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 4145 kg dimensions of the machine ca.: 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...
: 4 St. : 2 St. Plate thickness: 45 mm table length: 2000 mm range L-W-H: 2000 x 700 x 900 mm weight: 152 ca. kg. Furnishing: - brand new workbench - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 2000 (775 + 600) mm y-travel: 620 mm z-travel: 520 mm Control: Heidenhain iTNC 530 turning speed range - main spindle: 12.000 min/-1 power capacity - main spindel: 18 kW table surface area: 1.200 x 600 mm rotary table diameter: Ø 500 mm swivellable: +15/-95 ° rotatable: 0- 360 ° max. table load: 1000/350 kg tool taper: SK 40 number of toolpositions: 30 pos. internal coolant system feed: 20 bar rapid traverse ( X / Y / Z ): 30 m/min dimensions: 5,0x 2,5 x 3,3 m weight of the machine ca.: 11 t CNC-Machiningcenter Universal, 5-Axis and fixed table Machine overhold for 60.000 € - NC-Swivel-Rotary-Table integrated right working area - Fixed-Table left working area - 4th axis on fixed table 165 centre hight - Chip conveyor - internal coolant - filter - 3D probe - Oil dust collector - 2022/2023 overhold for 60.000 € new slideways aspindles in all axis - electric roof - new spi ...
Batch mixer for the production of chemical products, foodstuffs, building materials, plastics, animal feed, etc., max. usable volume: 2,000 l., parts in contact with the product made of stainless steel 1.4301 (AISI 304), mixing unit drive 30 kW (with external fan), equipped with 2 cutting rotors (18.5 kW each), 2 liquid lances for injection directly onto the cutting rotors and pneumatic spiral cleaning. Emptying via pneumatically operated bottom flap. The scope of supply also includes: control cabinet with frequency control for the mixing unit (0.25 to 2.8 m³/s circumferential speed), weighing frame with 4 load cells, 4 machine feet to raise the mixer body, jet-cleaned cartridge point filter with 4 m² filter area and 3 kW blower (ATEX, 2,580 m³/h air flow), silencer, water dosing and technical documentation. Available for an extra charge: Suitable frame for filling the mixer ...
3-deck swashscreen in stainless steel design (polished surfaces) with a screening area of 2.60 m² per deck, drive 4.0 kW via V-belts, equipped with sight glasses for screening material observation. Including 3 screen inserts (various mesh sizes available); Ball knocking devices and balls are available for an extra charge.
FOR SALE TBG 632V12 engine power 2798 kwe year 2000 hours 47 000 alternator AC GENERATOR year 2012 power 3041 kva RPM 1000 HZ50 400 V full instalation overhaul at 40 000 hours
greates pass round over bed: 960 mm swing diameter over bed slide: o: 860 / u: 730 mm turning diameter over bed slide: o: 860 / u: 400 control: SIEMENS - 840 D forward bearing diameter: 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Model: Siemens SIMATIC ET 200M Manufacturer: Siemens Type: IM 153-1 + SM 322 + SM 321 Items: 6ES7 153-1AA03-0XB0 6ES7 322-1BL00-0AA0 6ES7 321-1BL00-0AA0 Voltage: DC 24V Weight: approx. 4.5 kg (complete assembly with all modules) Condition: used, tested, functional Price without VAT per piece Country of origin: Germany Pieces: 1 complete set (8 modules incl. carrier rail)
- Renishaw measuring probe MP-12 - IKZ 15 Bar - Interface set - Performabnce software package - Monitoring B prepared not included
CTP thermal plates 58000 plates hand feeding plate stacker Server Workstation TIFF shooter
Sm 102-10P Autoplate All 3 washes Perfector 5x5 Cp 2000 only 84 mil Test Print is Possible
Manufacturer: König Maschinen Gessellschaft m.b.h. Austria Type: KGV Combi 2000 / 40, ( DD ) – RR 800- K5-SA5- SP5-FS-VO-MO (WB) 800-ABI 800 Year of manufacture: 2001 Control panel: Siemens Simatic The plant is controlled by a control panel with visual display Electricity: 3 x 400 V, 50 Hz, 13.5 kW Dimensions: Total length 11 meters The line is intended for the continuous production of weighed dough pieces which are automatically transferred from the main machine. ( Rex Automat ) The machine offers the following functions: - Rex automatic weighing and reception of the kneaded dough pieces. - Proofing in controlled air conditioning - Shaping of dough pieces, e.g. long rolling - Cutting of dough pieces - Flouring of dough pieces - Patterning of dough pieces - Seeding of dough pieces, e.g. sesame seeds, poppy seeds, sunflower seeds, etc. - Transfer of dough pieces to ...
Cap feeder for various types of caps, tubes, small bottles, etc. Stailess steel Year 2005
Key data: 2000 mm, 6 mm
Köllschen AM 2000 × 6, built in 1970: Working width: 2,000 mm Max. sheet thickness: 6 mm Motor power: 12.5 kW
Injection moulding machine Arburg 470C 2000-675 BJ 2007
Make: TRUMPF Type: TRUMATIC 2000R Year of Make: 2001 Working area: 1270 x 1270 mm Punching force: 18 tons Max. sheet thickness: 6.4 mm Max. workpiece weight: 75 kg Max. punching diameter: 76 mm Max. speeds: 90/60/108 m/min Accuracy: +/- 0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, Very good condition, only thin sheets
sheet width: 2000 mm plate thickness: 3 mm rear stop: von Hand, 750 mm number of support arms: 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock# UG6392 Automatic machine for lipstick filling. Manufacturer: Cosmatic (IT) Model: SM-2000 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2023.
Inv. Num. : 8711 Type: MG 2000 x 25/20 Producer: Maqfort Created: 1998, GO 2016 Parameters: Working length rollers: 2000 mm Max. sheet thickness: 25 mm
Injection moulding machine Engel victory 200H/200V790 comb BJ 2018
Croissant line RONDO, type: SCL - Calibration head - Cutting unit with cutting rollers and guillotine - Winding unit - Comfortable dough weight, seamless dough sheets, relaxation - Cutting separation of the cut-out dough moulds - Gentle winding without pressure on the laminated dough - tightly and loosely wrapped croiccants - Power: Up to 900 pcs per row - Condition: Very good, ready to use - Video in function can be sent Inspection and test run are possible by arrangement.
Manufacturer: Ascojet Model: 2001RX Type: Dry Ice Blasting Machine Operating pressure: up to 10 bar Air consumption: approx. 3–6 m³/min Dry ice consumption: 20–80 kg/h Hours: 481 Condition: used Location: Bremen
A Hoyer three-phase asynchronous motor is available. Protection class: IP55, insulation class: F/B, design: IM B3L, efficiency class: IE3, power: 30kW/36kW, power factor: 0.90, operating mode: S1, weight: approx. 250kg. Including Lenze i550 frequency converter. On-site viewing is possible.
Ref. no.: 18092 Hersteller: ENGEL Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg
Offer 25375 Specifications: - Working range / cutting length for approx. 5 m raceway approx. 3000 mm - Working range / cutting width approx. 1500 mm - Control BACH - Track gauge approx. 1900 mm - 1 plasma burner with height adjustment - Plasma source KJELLBERG Hi FOCUS 160 i - Cutting current at 100% ED 10 - 160 A - Cutting range steel approx. 5 - 50 mm - Cutting range aluminium approx. 5 - 35 mm - Cutting range stainless steel approx. 5 - 30 mm - Connection 400 V / 35 kVA - Extraction table with extraction system make TEKA, type Filtercube 4 H, built in 2010 - Weight approx. 4 T - Space requirement system approx. L 7.5 x H 1.5 x D 2.4 m - Space requirement for extraction approx. L 1.5 x H 3.5 x D 1.5 m
Manufacturer: Voortman Model: V320-2000 Year of Manufacture: 2019 Operating Hours : approx. 5,800 h Including plasma source Kjellberg Smart Focus 300 and extraction unit Donaldson DFPR06 (last filter change January 2025) Technical Specifications Working Range: - Plate length (min/max): 850 – 6,100 mm - Plate width (min/max): 200 – 2,050 mm - Plate thickness (min/max): 6 – 75 mm - Max capacity: 7,500 kg - Material: Steel Drilling Unit - Type: VD40 - Automatic tool changer: 2 × VTC 5/40 (2 × 5 positions) - Feed and positioning: Servo-driven synchronous servomotors, frequency converter - Spindle speed: 0 – 2,500 rpm (servo motor) - Power: 30 kW - Cooling: Internal cooling air/oil - Tool holder: SK 40 - Drilling diameter: 5 – 40 mm - Thread cutting: M6 – M30 - Countersinking: Yes - Centering capability: Yes - Layout marking (optional): Yes - Hydraulic clamping: Yes Pl ...
Key data: 610 mm, 1540 mm
Stock number: 3998 CNC LATHE Manufacturer: MORI SEIKI , Type: NTX 2000 / 1500 SZ MAPPS-IV CNC Year of Make: 2013 Specifications: Max. circumferential diameter 610 mm dia. Turning length 1540 mm Main spindle 4000 RPM - 26 kw Hole through drawing pipe 80 mm dia. Spindle bore 91 mm dia. C axis - head spindle movement 0.001 degrees X axis movement 675 mm Z ash movement 1562 mm Y axis +/- 125 mm mm B axis movement 120 degree - 0.0001 degree B axis spindle speed 12000 rpm B axis spindle effect 18.5 Sub-spindle 5000 RPM - 22 Kw Control MAPPS IV (MX711 ) 5 axis Fabr. Accessories: ATC Tool magazine with 76 stations Hydr. Chuck main spindle Kitagawa BB-210 - 250 mm/dia mm dia Hydr. Chuck Subspindle Kitagawa BB-208 - 200 mm/dia mm dia Car Door Chip conveyance. High pressure coolant pump 70 bar Measuring System Renishaw S ...
maximum number of results exceeded
please refine your search
