wd 200 used for sale

- Ultra-Sonic banding machine - Standard with the existing accessories

Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor

Key data: 2000 , 678 , 60

Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way

Dry Transformer Manufacturer: Schneider Type: DLPS 63E The device is NEW and fully functional. see pictures for more details.

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 100 kg

Year 1990 retrofitted to 2006 Type: S80 Power: 100 kw Clamping force: 80 Tons Passage between columns: 1400 x 800 mm Tray dimensions: 1800 x 1200 mm Minimum mould thickness max: 800 – 1200 mm Maximum mould width: 1200 mm Minimum mould height max: 500 – 1100 mm Total opening of trays: 2000 mm Minimum die diameter: 150-350 mm Hydraulic servo control: 6 spool valves Pneumatic servo control: 17 distributors Screw diameter: 100 mm 23LD Material throughput: 360 kg/hour Parison Regulation: MOOG 400 points Blowing rods: low position Accumulation weight: 8KG/HDPE

Key data: 1500 mm, 220 mm, 1700 mm

1 pc. used crankshafts & camshafts - cylindrical grinding machine Make BERCO Model LYNX 2000 Year of construction 2013 Specifications Max. grinding diameter for recirculating grinding 220 mm Max. grinding diameter for cylindrical grinding 300 mm Max. workpiece weight between the tips 150 kg Center height above table 270 mm Center width 1700 mm Max. sanding length 1300 mm Diameter of the chucks 180 mm Tailstock quill path 50 mm Max. grinding wheel diameter 660 mm Min./Max. Grinding Wheel Width 20/80 mm Max. circumferential speed 35/80 m/sec. Grinding spindle head (X-axis) Final drive with linear motor - travel 490 mm Measuring device optical scale resolution 0.0001 mm Workpiece head (C-axis) Workpiece spindle speed range 1 - 1000 rpm. Encoder Measurement Range - Resolution 0.0001 degrees Table (Z-axis) Final drive with linear motor Measuring device optica ...

-Stainless steel, work table -Design: stable -filing -double-sided table -Dimensions 2000/1800/H810 mm -Weight: 117 kg

-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H930 mm -Weight: 82 kg

-Stainless steel work table -Design: stable -Base floor: 1 -border -filing -Dimensions: 2000/930/H800 mm -Weight: 82 kg

-Stainless steel work table -Design: stable -filing -double-sided table -Dimensions: 2000/1800/H800 mm -Weight: 120 kg

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 2000 mm -Depth: 800 mm -Height: 890 mm -Weight: 145 kg

SARCMI BLUESTAR 2000 Complete PET filling line: Blow Molding Machine - SBO-14 ROUE - 18.200 bph Air Compressor - CE68BSG40 - 38,9 m3/m Air Conveyor Monoblock Filler BLUESTAR 2000 - 1R 54 72/9H - 0,5 l. -20000 bph, 1,5 l. -15000 bph Cap Elevator Labeling Machine ROLLQUATRO F30 - 24000 labels/hour Fill Level Control Device - STRATEC Shrink Wrapping Machine - АРЕТ 143/DF - 20000 labels/hour Bottle and Packaging Conveyor Pallet Stacker - PALKOMBI Series IBP429 - 30 pallets/hour Pallet Wrapper - ROTOPLAT 2000 - 30 pallets/hour All machinery in good condition, complete working line.

The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 BTA drilling system Drilling range full drilling 30-130 mm Max. boring 200 mm B8Uwbfcphz Max. drilling depth 2000 mm Drilling spindle box with two-stage gearbox electr. Switchable. Optionally rotating / standing tool Main spindle box ( tailstock ) with two-stage gearbox electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydr. Cheek chuck We will be happy to send you more pictures on request. We also see ourselves as a competent partner in the field of deep hole drilling in contract work. We would be happy to make you an offer!

current capacity: kVA throat: mm contact pressure capacity: kp volume capacity: Punching capacity: kN punching cross-cut in cmm: stroke: mm weight of the machine ca.: 170 kg dimensions: 1200 x 900 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Müro A3/2000 WT block size press; good condition; cleaned and tested; 2 hot air dryers; Working width 525mm; Insertion height 200mm. Padding press Müro A3/2000 WT; good condition; cleaned and checked; two dryers; working width 525mm; working hight 200mm.

Key data: 65 mm, 510 mm

12-8 position driven turrets - Y axis +/- 40 mm - with Lns Quick Load short barfeed - well tooled - fanuc 18i-TA Control

geared motor, electric motor -Speed: 36 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Number: 6x geared motors available Price: per piece -Weight: 36 kg

geared motor, electric motor -Speed: 36.5 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 36 kg

USED TETRA PAK TBA 19 200ML SLIM 20V COMPLETE FILLING LINE FOR SALE YEAR 2006 Item #: Usm-202 Category Tetra Pak TBA 19 TBA 19 200ML SLIM COMPLETE FILLING LINE Filling machine TBA/19 TBA 200 Slim, Version 20V, Year 2006, Working hours 29000 Straw Applicator Tetra Straw Applicator 21 Cardboard packer TCBP 70 Automatic palletisation unit Conveyors & Paper trolly

geared motor, electric motor -Speed: 36.5 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 36 kg

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 26 kg

brake motor, electric motor, three-phase motor -with: integrated frequency converter -Power: 0.75 kW -Speed: 1420 rpm -Design: B14 -Shaft: Ø 19 mm -Brake: 24 V -Protection class: IP 65 -Weight: 15 kg

USED TETRA PAK TPA 19 200ML PRISMA COMPLETE FILLING LINE FOR SALE YEAR 2002 Item #: Usm-203 Category Tetra Pak TBA 19 USED TETRA PAK TPA 19 200ML PRISMA FILLING LINE FOR SALE TPA 19 200ml Prisma Square, Version 10V, Working hours 23000 Straw Applicator Tetra Straw Applicator 21 Cardboardpacker TCBP 70 Automatic palletisation unit Conveyors & Paper Trolly Condition: Still on production.

geared motor, electric motor -Speed: 76 rpm -Power: 0.37 kW -Design: B5 -Shaft diameter: Ø 25 mm -Protection class: IP 65 -Weight: 23 kg

USED TETRA PAK TBA 19 200ML SLIM 20v FILLING LINE FOR SALE Item #: Usm-209 Category Tetra Pak TBA 19 1-Used Tetra Pak TBA 19 200ML Slim 20v Filling Machine, Year of manufacturing 2004, speed 7500 packs per hour 2-Straw applicator tsa 21, 3-Conveyors and Paper trolly

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Roller conveyor, conveyor belt, roller track -Roller width: 400 mm -Conveyor length: 2000 mm -Roller diameter: 50 mm -Central spacing: 100 mm -Height: 300 mm -driven: via flat belt -without: flat belts -Dimensions: 2000/520/H300 mm -Weight: 90 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: not shared -Tool dimensions: 30 x 90 mm -Tool total length: 2000 mm -Rail length: 2500 mm -Weight: 83 kg

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Depth: 500 mm -Height: 2000 mm -Number: 4x stands -Price: complete -without: crossbeams -Weight: 50 kg

Inductive sensor, electronic sensor -Manufacturer: IFM -Product Type: IF-2004-ABOW -Quantity: 3 available -Price: per piece -Weight: 0.2 kg

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

carrying capacity: 500 kg weight: 930 kg dimensions: 1250 x 2590 x 1500 mm Operating instructions available technical data see attached PDF The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 165 mm -Rezess recording: Ø 125 mm -Hole circle: 140 mm (3x M10) -Inner diameter: 40 mm -Speed: max. 4000 rpm -Weight: 12 kg

Roller Chassis - Carrier Chassis YALE Payload 2,000 kg Flange width 66 to 220 mm Flange thickness max. 25 mm Smallest curve radius 1.15 m Hand force at nominal load 7 kg Weight approx. 16 kg 16 units in stock - unit price

workpiece length: 2000 mm max. workpiece diameter: 400 mm min. workpiece diameter: mm bore spindle turning speed range: 260-1850 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 2000 KG ram hammer stroke: 1080 mm throat: 1100 mm impact capacity: 10000 kgm no. of strokes: 125 Hub/min ram hammer weight: 2300 kg work height max.: 620 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 4500 mm Working height: 3000 mm Number of cylinders: 6 St. Dimensions (L/W/H): 5500x1400x3550 mm Weight: 3000 kg S&S frame press Bavaria 2000 L, built 2026 --------------------------------- SHORT TIMED availabe exw warehouse Engelfried, 73447 Oberkochen NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beam ...

grinding length: 2100 mm grinding width: 600 mm workpiece height: . mm magnetic plate size: 2000x600 mm total power requirement: 55 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2200 mm swing diameter: 2500 mm turning height: 1600 mm Control: Siemens chip conveyor: total power requirement: 100 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m vertical lathe with two RAM, faceplate Ø 2000 mm, SPS supported control for storable cycles, RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling, Chip conveyor / spindle Z-axis as new / without KSS Filter unit / 3 glass scales are missing / control panel is disconnected but complete and OK, a 90 degree angle is missing from the control panel arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 800 mm turning length: 2000 mm control: Monfort R&D turning diameter over slide: 520 mm spindle hollow: 88 mm total power requirement: 53 kW weight of the machine ca.: t dimensions of the machine ca.: 4,2x2,2x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...

Water treatment plant Manufacturer: BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 BWT Osmotron water treatment plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production 1 piece of water treatment plant BWT Osmotron Plant of the company BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production, incl. • 90μm pre-filter with automatic backwash • Softening system in series operation (without hardening slip) and for 600 litre salt-plastic tank for regeneration • Heyl Testomat 2000 • 2 chlorine cells to reduce germs in the softeners • Reverse osmosis modules for 2000l/h • 4x SM20 EDI modules (electro-deionization modules) • Conductivity meter for permeate (after reverse osmosis module) Mettler Toledo • Conductivity meter for diluate (according to EDI modules) THORNTON 200C ...