126,661 used machines on RESALE, but how to find them? Machine Search
Gear motor, electric motor -Speed: 65 rpm -Power: 0.55 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Number: 1x geared motors available -Price: per piece -Weight: 31 kg
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 11 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. Shipping time: immediately
4-sided planer and roll forming machine with 5 shafts Finished dimensions 240 x 170
Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton
max. plate width: 80 cm stamp width: 425 mm serial no.: 174 plate punch autoplate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 0400 mm coil outside dia.: 460 - 530 mm weight max. in kg: 2 x 2000 kg plate thickness: 0,40 - 3,00 mm coil outside - diam. ca.: 1500 mm nomb. of straightening rolls: 9 diam. of the rolls ca.: 30 mm speed: 0-40 m/min total power requirement: 15 kW weight of the machine ca.: 5,20 t dimensions of the machine ca.: m - straightening machine type KRE 30.400/9 with infinitely variable drive, motoric adjustment of the roller cassette, rapid clamping device - double decoiler type 2000.2 H with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll - coil loop control via ultrasound The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 2.8 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H720 mm -Weight: 74 kg
Product number: 2847 Type: TSRR-200SLD Serial number: 303 NL 2017 Year of construction: 2017 Content: 200 litres Heating: steam, 111 kg/h Mixing: 10 - 60 RPM Power: 3 x 400V, 50Hz, 2.2kW Dimensions: 1550 x 1250 x 1700 mm Weight: 440 kg With mixer / agitator
DIXIE UNION, DIXIEVAC2000 Thermoformer, 400 Volt, 50 HZ, in working condition
- Bread Slicer Slicer & Bread Packing Machine -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfitzenmaier & Söhne - Type packaging: Rianta 84-CSS/2000
UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy
used
SMI TEC COSMOS 2000 Digital Servo Drive / Servodriv NEW Quantity: 2 pieces Price: 2500 per piece
Can depalletizer Kahl & Schlichterle type can DP 20000 capacity: up to 20.000 cph The palletizer is adjustable for one pallet size (has to be clarified) incl. manual loading per forklift construction in stainless steel pallet lifting system automatic carboard layer removal layer magazine control panel incl. Siemens S 7 The can depallitizer will handle two pallet formats and five different can sizes
Work table bakery - confectionery table with granite worktop open at the bottom with intermediate shelf Stainless steel Approx. dimensions: 2000 x 800 x 900 mm, WxDxH Occasion
Gear motor, electric motor -Speed: 26.5/53 rpm -Power: 0.18/0.3 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 500/230/H230 mm -Weight: 32 kg
geared motor, electric motor -Speed: 112/224 rpm -Power: 0.55/0.75 kW -Design: B3 -1x Shaft diameter: Ø 20 mm -2x Shaft diameter: Ø 24 mm -Protection class: IP 65 -Price: per piece -Quantity: 3 available -Dimensions: 410/230/H200 mm -Weight: 24 kg
USED TETRA PAK TBA 19 200ML SLIM COMPLETE FILLING LINE FOR SALE Item #: Usm-189 Category Tetra Pak TBA 19 Used Tetra Pak TBA 19 200ml Slim Filling Machine, Version 10v, Year of manufacturing 1998, Speed 7500 PPH Tetra Pak Straw Applicator, TSA 21 Tetra Pak Packer, TCBP 70 Conveyors and Paper Trolly Condition: Good
Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.
Three-phase motor, electric motor -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 mm -Height of shaft axis: 200 mm -Design: B3 -Protection class: IP 54 -Dimensions: 750/380/H490 mm -Weight: 287 kg
CNC Manufacturing Center Mill 2000 Commissioning 2007 4 - 5 axis machine Siemens 840 D Commuting X axis 2000 mm y axis 500 mm Z axis 550 mm 40 tool slots Rigid table with chip tray Clamping surface 2600 mm 550 mm with 3 T-slots High-speed package Rapid traverses 60 m/min Speed 20 - 12,000 rpm Coolant pump 30 bar 900 liters 2 extraction units as air purifiers Automatic grease lubrication 2x Rinsing gun Single-shift operation Spindle has been renewed and much more. The machine can be viewed under power
Several used old-type tanks from the 80s, capacity approximately 10.000-20.000 liters
Used ribbon mixer by Riela. Capacity 2000 L. Engine power 11 kW.
Length of the grinding (mm) 6000 Width of the grinding (mm) 2000 Height of the grinding (mm) 1250 Weight: 60T Overall dimensions Width 2940 mm Height 5120 mm Length 16640 mm
Bag Clipper P+S Mako BFS30C-C/2005 -Bag clipper, bread bag, noodle bag, etc -Manufacturer: P+S Mako Verpackungsmaschinen GmbH Pfizenmaier & Söhne -Type: BFS 30C-C -Stainless steel machine -Operating voltage: 3V 400 50Hz -Year of construction 2005
The scope of delivery includes: 01x Shelf connector, second choice (new) Manufacturer: Kimer for shelf spacing: approx. 200 mm Material colour: sendzimir galvanized Total length: approx. 280 mm Profile: U 78 x 30 mm Weight: 0.47 kg | Pcs. Note: This is a second choice product, new unused. II. Choice means there may be dust deposits, minimal scratches or contamination may be present. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending on the place of delivery or scope of delivery.
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately
automatic baler Manufacturer: WELGER Type: SB 2000L Machine No.: 1307 51 321 specifications: Pressing force: 7 t Drive power: 11 kW Bale format 500 x 400 x length in mm Machine weight: approx. 1.9 t
Inv. Num. : 6144 Type: Scorpion 2000 Producer: Pierce Created: 2004 Parameters: Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 2 mm Maximum sheet thickness when cutting: 15 mm Equipment: Source: Hypertherm 1650 Vacuum New Burner PC board replacement. According to GO.
Description: Type : Oil Transformer Variation : Hermetic Make : CG Power System IRELAND LTD. Year of construction : 2016 Condition : New Nominal power : 3200 KVA Medium voltage : 22 KV + - 2x 2.5 % (20000V +- 2x 2.5% after 400V Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type : KNAN Total weight : 7366 Kg Oil weight : 1760 Kg Mineral OIL Elster Length: Width: Height: Other sizes and voltages also available from 100 KVA to 3500 kva. All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery . Available Mon to Sat 8 a.m. to 10 p.m.
Key data: 5500
Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones
turning diameter: 372 mm turning length: 520 mm control: Siemens 820 D inkl Operat weight of the machine ca.: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear motor, electric motor -Speed: 14 rpm -Power: 0.11 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 54 -Number: 1x geared motors available -Price: per piece -Weight: 37 kg
- Hourly output: up to 2000 cartons - With NORDSON hot melt device - Machine in good condition
USED TETRA PAK TBA 19 200ML SLIM 30V FILLING LINE FOR SALE Item #: Usm-198 Category Tetra Pak TBA 19 1-TBA 19 200ml Slim Filling Machine, Year of Manufacturing 2007, Working Hours 9500 2-Straw applicator, TSA 21, Year of manufacturing 2007, U Type Straw, Version 200v 3-Cardboard Packer, TCBP 70, Version 110, Package pattern: 3x9. Feeding side: Right. Infeed form: Z 4-Conveyors and Paper trolly CONDITION: EXCELLENT
Gear motor, electric motor -Speed: 83 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 2x motors available -Price: per piece -Dimensions: 440/240/H210 mm -Weight: 26 kg
Gear motor, electric motor, electric gear motor -Speed: 16.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: -Weight: 33 kg
Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 530/240/H220 mm -Weight: 31 kg
Weibert FKK 315-2000E Sliding table saw Trimming length 2000 mm Saw blade diameter 315 mm Cutting height 100/80mm Cutting width with stop 1220 mm Saw blade inclination 0-45° Suction nozzle diameter 38/100mm Motor 3 kW 400 V Weight approx. 260 kg Work table grey cast iron Saw Blade Heights & Swivel Handwheel G&STÜ-5900317
200 m pallet rack SSI Schaefer PR600 Used goods, good condition, see pictures Height 6.75 m Depth 105 cm Beam length 3.6 m Load/compartment 4000 kg Galvanized frame Straps blue Negotiation price: € 18,000,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 105 cm, height 6.75 m + 324 pcs. beam, length 3.6 m, 4000 kg ballast/compartment + 648 pcs. Suspension locks + 220 pcs. concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all prices excl. VAT from stock.)
Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data of the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x Workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm Clear width: 3,000 mm 08x Locking pin, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 3,200 mm Particleboard depth: 600 mm Surface: coated if necessary (possibly in two parts) 01x Particleboard Second choice, used Chipboard thickness: 38 mm Particleboard width: 2,980 mm P ...
Many of our machines are available from stock. Call and ask to find out more. Handheld laser welder LWH-2000-N RayTools The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 2000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including cable rack) 630x1300x1500mm Price included One-day training along with machine installation - 1 day up to 8 hours – machine installation and operational training. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work fr ...
table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure Horizontal area 800mm Rising range 2,000mm Angle in the bend 45° Feed height: 300mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edges, blue FDA- Food compliant, food certificate is included Drive: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional Freely steerable transport rollers incl. parking brake Scalloped edge: 50x35mm T-40 cleats - approx. 300mm pitch 2-layer particularly transversely stable Usable width: 290mm, results as follows: Cross arrangement 70+35+290+35+70mm All our prices are net prices plus VAT. - can also be viewed under power after consultation!
Aluminium Z conveyor belt incl. mobile substructure Horizontal range 800mm (customizable) Rising range 2,000mm (customizable) 2. Horizontal range 800mm (customizable) Angle in the bend variable, infinitely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 0.55KW ( customizable ), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x25mm T-50 Cleat - 400mm pitch 2-layer particularly transversely stable The delivery time of an individual system is currently approx. 3-4 weeks, depending on the production effort. Our core competence lies ...
Jacobsen M 2000 Mounted - Cylinder mower for push and PTO drive 1,000 rpm in the direction of travel turning left, three-point hitch Cat. I., approx. 210 cm working width, 3 spindles 6-blade hydraulically driven, hydraulic lifting, spindles follow the curve radius by articulated arrangement (limited). According to the previous owner, only 1 mowing season used, year of construction unknown. Other attachments - cylinder mowers make Bucher, Loipfinger, Ransomes, SABO available - see photos. Information on request, also self-propelled Ransomes motor Triple MK IV M, many Ransomes parts, including complete spindle units. ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...
Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg
Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg
roller conveyor, conveyor track, roller conveyor belt, roller track -Roll width: 2000 mm -Conveyor length: 5000 mm -Roller drive: via conveyor chain
maximum number of results exceeded
please refine your search
