126,611 used machines on RESALE, but how to find them? Machine Search
High quality machine housing, 548 x 129 x 200cm hoch, KMS, mint condition -90% Special price ! If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. The parts have minor signs of disassembly. High quality machine enclosure, length 5480, width 1285, height 2000mm, Consisting of: - Total 12.24 running metres of enclosure, - High quality frame with removable panels, all top painted, - 2 large double doors without locking system with plexiglass, - The back consists of 7 removable elements of plexiglass and sheet metal - The top is made of plexiglass all round - The roof consists of slide-on frames with plexiglass edging. - The elements are all very strong and of high quality - Incl. the many machine feet and the ...
Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.
Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional
20,000 liters tank with thermal insulation not used tanks
Erl Working width: 2040 mm for sheets up to: 3 mm Opening width upper cheek: 90 mm Adjustable bending cheek: 90 mm Upper cheek drive: 1.5 kW Lower cheek drive: 4 kW electr. Connection: 380 V kW Weight: 2600 kg Space requirement: 3050 x 800 x 1350 mm
Cast iron bed Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T MACHINE IN OUR STOCK IN FRANCE.
Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.
Cast iron clamping cube Dimensions(only the cube): L 2000 x H 1500 x Depth 1200 mm 4 faces with T-slots T-slots dimensions: 58 x 36 mm Total height with enhances angle plate: 2050 mm Total height with rail: 2700 mm Weight: approx 7 T MACHINE IN OUR STOCK IN FRANCE.
Very good machine with spare parts worth 3000,00â?¬.
HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...
1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.
with Ultra Turrax T25 Vacuum pump with controler IKAVAC Heater Huber Control unit RE 1621 l P various spare parts Operating manuals Dimensions LWH: 1200 x 800 x 860 mm Weight: approx. 100 kg
McIntyre Alpack 2000 Automatic Can Sorter The McIntyre Alpack 2000 Automatic Can Sorter provides an inexpensive way of separating large volumes of steel UBCs from high value aluminium cans Efficient, versatile, cost-effective The McIntyre Alpack 2000 Can Sorter can work both independently or be coupled with a JMC Baler to provide a complete sorting and baling system. Alpack 2000 is able to give almost 100% separation of aluminium from steel.
Key data: 200 KW, 250 kVA
ENGINE: Man E2676LE202 FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: BIOGAS COOLING: WATER-COOLED WEIGHT: 4400kg DIMENSIONS L/W/HEIGHT (MM): 430013002000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details an ...
Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.
4-way push-mast forklift Manufacturer: BT Model: FRT 2000/4 Built: 1984 Capacity: 2000 kg Triplex mast Lifting height: 5400 mm Battery Voltage: 24V Charger Weight device Side driving possible Fork extension Condition: used, but fully functional
2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.
Key data: 200 KW, 250 kVA, 400 V
MODEL: EQ-VP250200 GENERATOR ENGINE: Volvo Penta TAD734GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 250(kVA) / 200(kW) CYLINDERS: 6 FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1950kg DIMENSIONS L/W/HEIGHT (MM): 260011001530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address ...
Grease baking device Jufeba TK-2000 -Fat baking device Jufeba -Type: TK 2000 -20 kW -Outside mass: 198x91cm -Basin inside mass: 194x87cm
new ! all stainless steel capacity 200 L. mobile 40 kg quality According to DIN 9797
[ 5000 characters max., no information about the advertiser ] Brand:MODUL Model:ZFWZ 2000/3 Type:Gear Hobbers Year:1981 Location:Czech Republic Specification: Max diameter of gear without tailstock 2100 mm Max diameter of gear with tailstock 1450 mm Max face of gear 1060mm Max module with hobbing head 22 Max/ Min center distance 1240/150 mm Min number of teeth 10 Max pressure angel 45 deg Table dia / number of slots 1800 mm/12 Bore in table / length 600/800 mm Max dia of hob / length 300/330 mm Max weight of workpiece 15000 kg Accessories: Standard milling head Tailstock (no clamping) Set of gear supports (shoes) Set of arbors Set of change gears
Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP
Key data: 200 KW, 250 kVA, 400 V
MODEL: EQ-D250200 ENGINE: Deutz BF6M1015C-LA G1A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3300kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...
Key data: 1600 KW, 2000 kVA, 400 V
ENGINE: 4016TAG2A FREQUENCY (HZ): 50 POWER: 2000kVA / 1600(kW) CONTROL SYSTEM: DSE / ComAp FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 17274kg DIMENSIONS L/W/HEIGHT (MM): 750022002250 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address For more information or i ...
new Aerzen vacuum pump GM 2000 CM - Y 11 KW for frequency inverter operation Built in 2010 New, original packed 2800 m3 / h Price is unit price net, plus 19% VAT 6 pieces available
Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.
JORNS MAXI LINE 200SW folding machine was built in 2007 in Switzerland. The machine, designed for precision bending of various types of sheet metal with a maximum length of 6400 mm, is a HIGH variant, which offers a faster work speed of up to 25% compared to the standard model. During its use, the JORNS MAXI LINE 200 hydraulic folding machine has undergone regular maintenance. All moving parts and the bending bar were replaced with original manufacturer’s parts. Technical data of the JORNS MAXI LINE 200SW CNC folding machine - control system CNC 600 - maximum sheet metal length: 6400 mm - maximum sheet metal thickness: 2 mm - rear measuring table type 91 with AC servo motor - rear measuring table range: 1000 mm - roller shear SM 3 - foot switch - maximum hydraulic pressure: 250 bar - motor power: 7.5 kW - power supply: 380-420 V; 50 Hz
Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.
Autotherm ATK 2000 cooling system 20.5 kW recooling system in 20-foot container Specifications Nominal voltage: 3/PE AC 50Hz 400V (DIN IEC 38) Rated power: 20.5 (31.5) kW Rated current: 50 (71) A Supply line fuse: 80A Mechanical data Dimensions: (W x L x H) 2430 x 6800 x 4350 mm Weight: 4800 kg Feed: Flange SDIN2633 DIN100 PN16 Return: Flange SDIN2633 DIN100 PN16 Overflow/Drain: 2" F Well water inlet: 2" IG Well water drain: 2" IG Inlet Adiabatics: 3/4" F Filling: manual 3/4" F Water cycle Heat transfer fluid: water/glycol ( 90% / 10% ) Flow pressure: max. 10.6 bar Tank capacity: 4000 liters Free cooling circuit Pump type: Grundfos CR 45-1-1 A-F-A-E-EUUE Delivery pressure: ... 2.15 bar Flow rate: 58 m³/h Consumer group Pump type: Grundfos Hydro 2000 ME 2 CRE 32-6 A-F-A-E-EUUE Delivery pressure: max. 10.6 bar Flow rate: max. 40 m³/h Container 2 ...
DURMA VN 2006 hydraulic corner notching machine was built in 2016. The machine, equipped with state-of-the-art solutions and reliable components, is designed for machining workpieces made of plain and alloy steel with a maximum thickness of 6 mm. The machining process is performed on a robust, machined table with T-slots for fast and accurate tool positioning. Thanks to the automatic adjustment of the blade, high quality of material notching is achieved with the correct gradation and straightness of the cutting edge. The cutting angle is adjustable from 30° to 140° using knobs located on both sides of the machine. The three upper and four lower hydraulic cylinders in turn ensure that accurate and repeatable notching is achieved. The VN 2006 corner notching machine weighs 950 kg. Technical specifications of the DURMA VN 2006 corner notching machine - maximum workpiece thickness (60 ...
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Adjustment range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer due to built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 2-roll drive Fuse 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Age 12 months Condition workshop-tested, as new, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch, 3 mtr. Long 1 piece ground cable 4 mtr. Long 1 piece pressure reducer Argon with 2 pressure gauges 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece of protective glass 10 DIN 1 piece of white glass 1 piece spare part box ...
Mori seiki MT 2000 multitasking lathe :::TECHNICAL SPECIFICATIONS::: CNC model: Mori Seiki - CNC version: MSC 501 - Spindle nose: ASA 6 - Spindle power: 22Kw Number of main spindle speeds: 6000 - Turning diameter: 540mm - Bar passage: 65mm - Turning length: 1020mm Number of tools: 60 Tool holder: CAPTO C6 Spindle power: 18Kw Number of spindle speeds: 8000 X-axis travel: 565mm Y-axis travel: +-80mm Z-axis travel: 1077mm Swivel B-axis travel: + - 120 ° degrees Fast feeds for linear axes X Y Z: 24m/min High refrigerant pressure: yes Pressure value: 80bar External tank system with filter: yes Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 155mm First turret Z-axis travel: 1067mm Sub-spindle: yes Spindle nose: ASA 5 Number of counter ...
New machine 24-month warranty Benefits: + Solid construction + Boiler, central rod and spiral made of stainless steel + Drive with two motors (spiral & boiler) + Flour dust hood closes gently with dampers, with auto shut-off + mobile machine, on swivel wheels, with fixed boiler + Dirt protection cladding for adjustable feet + short kneading time with excellent result + Switches for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + fast spare parts supply within 1-2 business days Technical data: - Flour capacity: 10 - 120 kg - Dough capacity: 15 - 200 kg - Boiler volume: approx. 320 litres - Boiler outer edge: 970 mm - Engine power: 13.5 kW (kneading spiral & boiler drive) - rpm at 50Hz (1st / 2nd gear): 98 / 196 - Connection values: 400V - 3Ph - 50Hz - 63A CEE plug - Dimensions in cm: 97 x 156 x 160 (WxDxH) - H ...
New machine 24-month warranty Benefits: + Solid construction, with mobile tank car + Boiler, central rod and spiral made of stainless steel + powerful drive with two motors (spiral & boiler) + hydraulic (vertical) lifting device for the kneading machine + Flour dust hood closes gently with dampers, with auto shut-off + short kneading time with excellent result + Switches for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + Tank wagon suitable for lifting tipper mounting (see model "ElevatO") + fast spare parts supply within 1-2 business days Tank wagons: - 1 tank wagon included in the price - additional tank wagons for SpiralO XL 120A: + 4335,-- € net / car Technical data: Flour capacity: 10 - 120 kg Dough capacity: 15 - 200 kg Engine power: 12 kW (spiral) + 1.5 kW (boiler) = 13.5 kW U./min at 50 Hz (1st ...
We offer a Noe Top 2000 wall formwork in an immediately ready for use condition. The elements are largely galvanized and covered with plastic formwork lining. Price without accessories 99,00€/m² Pcs. Designation 60 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 4 panels 250 x 3310 2 panels 400 x 3310 10 panels 450 x 3310 12 panels 490 x 3310 20 panels 500 x 3310 11 panels 550 x 3310 3 panels 610 x 3310 2 panels 750 x 3310 8 panels 1000 x 3310 8 panels 1250 x 3310 9 panels 1320 x 3310 15 IU 3310 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction ma ...
Storage tank / beer tank / pressure tank with cooling jacket round of V2A Operating pressure: 0.99 bar, test pressure: 1.7 bar Quantity: 100+ Content: 17-00047-1L 800 litres 17-00047-2L 1000 litres 17-00047-3L 1,200 litres 17-00047-4L 1,500 litres 17-00047-5L 1,800 litres 17-00047-6L 2,000 litres Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with pressure lid 390 mm with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 connection with 6 x star grip screws Cylider tank: with cooling jacket with 1 x beading stiffening Underbody: with forward-drawn outlet pipe DN 50 with disc valve with 4 stable feet can be underrun with pallet trucks
Key data: 160 KW, 200 kVA, 400 V
MODEL: EQ-D200160 ENGINE: Deutz BF6M1013FC G3 FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 200(kVA) / 160(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2600kg DIMENSIONS L/W/HEIGHT (MM): 290012001600 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry ...
6-wheel mower with four-wheel drive, Farymann 2 cylinder diesel engine, hydrostatic drive, power steering. Hydraulic inclination adjustment, track width adjustment, spread arm with 180 cm double knife mower beam. Tyres 6x 4.50-14 AS.
Key data: 200 KW, 250 kVA, 400 V
MODEL: EQ-D250200 ENGINE: Deutz BF6M1015C-LA G1A FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 250(kVA) / 200(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3300kg DIMENSIONS L/W/HEIGHT (MM): 380012502000 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inqui ...
We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...
Perfect, used short time. Lead Screw and Feed Shaft Lathe 3-axis position indicator Workpiece length (max.) 1.928 mm Turning diameter over bed 560 mm Turning-Ø over support 355 mm Turning diameter over gap bridge 785 mm Gap bridge length 170 mm Bed width 350 mm Travel X-axis 316 mm Travel Z1-axis 130 mm Swing range of top slide ± 52° Spindle speeds L 25-200 / H 200-1600 1/min Spindle bore 80 mm Spindle mount Camlock D1-8 Spindle taper MT 7 Feed X-axis 0,02 - 0,573 mm/R Feed Z-axis 0,059 - 1,646 mm/R Tapping, metric (47) 0,2 - 14 mm Tapping, diametric (50) 4-112 DP Tapping, module (39) 0,1 - 7 mm Tapping, whithworth (60) 2-112 TPI Tailstock quill diameter 75 mm Tailstock taper MT 5 Tailstock quill stroke 180 mm Tailstock traverse adjustment ± 12 mm Motor rating main drive 7,5 kW Overall dimensions 3,34x1,15x1,46 m Weight 2.720 kg 3-jaw chuck Ø 315 mm 4- ...
FANUC LR Mate 200i Automation Robot + Controller R-J2+ Handheld The FANUC LR Mate 200i is a compact six-axis robot that is ideal for a wide range of manufacturing and system processes. The LR Mate 200's tabletop design allows it to be used in a wide range of commercial and industrial applications while saving floor space. The LR Mate 200i offers maximum flexibility in a compact design. The LR Mate 200i's hollow joint design wraps all cable routing to prevent snagging, and absolute serial encoders eliminate the need for calibration when powered on. Upright or inverted mounting positions are possible without robot modifications. The LR Mate 200i uses the RJ3 controller. The FANUC LR Mate 200i features an end effector connector integrated into the wrist, fail-safe brakes on axes 2 and 3, sealed bearings and drives, and a standard IP54 dust and liquid ingress package. It also has an ...
Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.
Technical characteristics: Rated power: 2000 kVA Primary voltage (HV): 20,000 V Secondary voltage (LV): 400 V Adjustment positions: 1: 21,000 V 2: 20,600 V 3: 20,000 V 4: 19,400 V 5: 19,000 V Frequency: 50 Hz Phases: 3Isolation level: HV: 125 kV / AC 10 LV: AC 10 Cooling: KNAN Service Plan: Ongoing Connections: Connection diagram: Dyn11yn11 Output voltage: 400 V – 50 Hz Multiple Connection (Low Voltage): 1W, 1V, 1U / 2W, 2V, 2U Short-circuit current: 5.83 kA Short-circuit impedance: 6.1% Cooling & dielectric: Dielectric Fluid Type: MIDEL 7131 No-load loss rate: 1873.1 W Load Drop Rate: 15.1 kW Location :p aris Condition: Very good condition – Tested and ready-to-use hardware Disassembly and transport possible on request
; Gross weight [kg]: 5847; Engine: Perkins 4016TAG1A; Accessories: Control Panel, Including: Coolant heater and battery charger
Key data: 160 KW, 200 kVA, 400 V
MODEL: EQ-VP200160 GENERATOR ENGINE: Volvo Penta TAD732GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 200(kVA) / 160(kW) CYLINDERS: 6 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1700kg DIMENSIONS L/W/HEIGHT (MM): 252010601530 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight pr ...
- High pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam similar but no Dynajet, Oertzen, Falch, - Cold water / hot water / steam 32 bar to 140°C / high pressure steam 150 or 200 bar to 150°C for cleaning and disinfection The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min. at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min. at 200 bar - Dimensions and weight: 110x64x98cm, approx. 150kg - incl. 10 m high-pressure hose, spray gun, lance and flat jet dues 25°
maximum number of results exceeded
please refine your search
