126,612 used machines on RESALE, but how to find them? Machine Search
Specifications: width 2000 mm height 1200 mm Depth of 850 mm
Manufacturer: Heinrich KöllschenMaschinefabrik Rheydt Model: on the 2000 x 20 machine no.: 761907 Year of construction: 1976 weight: 24500KG General information / technical data: heavy mechanical bending machines from sturdy welding construction in very good condition Working width: 2000 mm Steel ST 50 maximum material thickness: 20 mm Opening the top clamping (clamping cheek): 475 mm Adjustment of the beam: 200 mm motorized height adjustment Bending angle: 130° via electrical rotation angle input can be set Upper cheek speed: 6 mm / sec Bending beam speed: 1.25 RPM (approx. 90 sec for 90 ° bend) Backgauge: from 50 to 999 mm electrically adjustable, with digital display of length dimensions machine: (h x w x d) 3600 x 4350 x 4400 mm (without pit / with bending beam landing) Dimensions cabinet:(h x b x t) 1800 x 1200 x 400 mm Bending actuator power: 30KW Power top clam ...
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 6 total power requirement: 7,5 kW weight of the machine ca.: 4,340 t dimensions of the machine ca.: 3830 x 1160 x 1180mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. weight: 2000 kg Dimensions (L/W/H): 5550x1300x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 4 St. sanding width: 200 mm Sanding height max.: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 2 St sanding width: 190 mm Sanding height max.: 2 - 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
0: 200 °C Torque: - 0 Dimensions (HxWxD): 680 x 1320 x 760 mm weight: 177 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turbomolecular pump Manufacturer: Pfeiffer Type: TPU 2000S Status: Used Nr.: PMP01141/9007 A 12-month service is possible; ready for use
machine measurements: 2.900 x 700 x 1.700 mm machine weight: 400 kg power capacity: 2,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate thickness: siehe TD mm pressure: siehe TD t total power requirement: 4 kW weight of the machine ca.: 0,950 t dimensions of the machine ca.: 900 x 1050 x 1300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Waelzpistongeblaese Manufacturer: Leybold Type: RUVAC WSU 2001 Cat No.: 11741 Suction moulds: approx. 2000m3/h Status: Generalueberholt Gewastperformance: 12 months (similar); ready for use
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2700 x 2300 x 1350mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 4mm total power requirement: 5,5 kW weight of the machine ca.: 2920 t dimensions of the machine ca.: 3600 x 970 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use
Punching and forming center in chain with an assembly line for the production of relays, see pictures
new
sheet width: siehe TD mm plate thickness: siehe TD mm distance between columns: siehe TD mm total power requirement: 3 kW weight of the machine ca.: 1,28 t dimensions of the machine ca.: 2600 x 1350 x 1260 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
conventional haertepruefer for the Processes Rockwell C , B , A Analog measuring watch, manual operation, weight load system Standard compliant according to ISO6506 Performance 2 years At the price, no used hardness tester is worthwhile. Better to spend a little more, but with a guarantee. More info schuetz-licht.de/produkte/haertepruefer/haertepruefgeraete-rockwell/ha ertepruefgeraet/
The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.
The CE40 belongs to the series of our high-pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal moldings and circumferential stainless steel side frames. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eyelet facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General Specifications: ----- Power of the drive motor: 30 kW (50Hz) / 33 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A ...
Industrial washing machine for small parts Turbex Binitron 2000, machine no. 94252, 400V 50Hz 25A, see also pictures
Simonazzi Tribblock 100-100 15 100 spray heads, 100 filling valves and 15 capping heads. Performance: 0.5 lt / 32,000 FL/h 1. 0lt / 29,000 FL/h 1.5 lt / 22,000 FL/h 2,0 lt / 18,000 FL/h Machine in very good maintained condition
The CD50 series of our high-pressure machines covers a pressure of 230 to 2000 bar and a volume flow of 7 to 74 l/min. The pump is powered by a water-cooled 4-cylinder Toyota diesel engine. The fully enclosed frame is made of hot-dip galvanized steel to ensure a long service life and corrosion resistance. The frame is primed and then painted. The machine only requires a footprint of 1550 x 920 mm. Under the frame 4 rubber feet are mounted. In addition, the machine has forklift pockets and lifting eyelets attached to all four corners. For the protection and storage of, for example, high-pressure hoses, a galvanized roof plate provides. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Volume Flow CD50-230 230 bar 74 Lpm CD50-400 400 bar 40 Lpm CD50-500 500 bar 33 Lpm CD50-700 700 bar 25 Lpm CD50-1000 100 ...
Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image); ready for operation
Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 2000 A Suction capacity: 2065 m ³/h Engine: 5.5 KW Cat. No.: PP W61 000 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation
Material: Stainless steel 1.4301 Drive: 4 KW Weight: 1550 kg Area per deck: 2,6 m² Incl. 2 x ball knocking cleaning / 2 x sieve with mesh size choice: 0.1 5 mm.
Machine type MIG/MAG welding system Make MERKLE Type RedMIG 2000 K Connection voltage 3 x 400 volts Setting range 25 - 200 amperes Switch-on time 30% ED at 200 amperes 60% ED at 140 amperes Current setting 7 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Design mobile compact system Wire feed 4-roller drive DV 26 Hedging 16 Ampere Dimensions L x W x H 800 x 460 x 655 mm Weight 70 kg Special accessories 4-roller gearbox DV 26 Age 6 months Condition very good, as new Scope of delivery Welding system with the following accessories: 1 piece welding torch SB 157 G, 3 mtr. Long 1 piece ground cable 4 mtr. long, 25 sqmm 1 piece pressure reducer argon with 2 pressure meters 1 roll welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece hand shield 1 piece protective glass 10 DIN 1 piece glass whi ...
MAZAK INTEGREX turning/milling center 200Y Bu. 1999 Mazatrol fusion control Max Drehdurchm. 520 mm Max Schwingdurchm. 540 mm Maximum turning length 1,018 mm Bar passage 51 mm C-axis + angetr. Tools Y-axis +/-70 mm Distance between the top 500 mm Drive 30 kW Maximum main spindle spindle speed 5,000 rpm Maximum speed milling spindle 6,000 rpm Tool changer with 40 stations 3-jaw Chuck 200 mm Tool measuring arm Tailstock Chip conveyor Total connected load 31 kVA Machine dimensions 3.50 m x 2.10 m x 2.50 m Machine weight 6,800 kG 25 tool holder KM 36 duty hours approx. 36,000
Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...
Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Technical data: -Lifting capacity 2000 kg -max load capacity horiz. 3500 kp -Faceplate hub 1750 x 1750 mm -Drehkreuzverängerungen -Faceplate geared motor Tiltable 0-90 ° -Rotation Electr. adjustable 0.2-1.5 m / min -Right - left rotation - welding current transmission 1200 A -400 V - table height in horiz drive. Position with frame approx. 2070 mm -Table height at horiz. Position without stand approx. 940 mm -Space requirement approx. B 1650 x H 1130 / 940 x H 2500 mm -Weight approx. 2.2 t
to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm
Mobile u scales for fine weighing Model UV 2000 Weighing capacity 2000 kg Accuracy in +/-2 kg Number of sensors 4 pcs. Height 120 mm Weight 38 kg Made in Denmark
Special price for stock goods! Only while stocks last! Belt dimensions: 75 x 2000 mm Belt speed: 29 m/sec. Contact disc Ø x W: 200 / 80 mm Face grinding table: 460 x 75 mm Suction connection Ø: 100 mm Motor output power S1 100%: 3.0 kW Motor input power S6 40%: 4.0 kW Voltage: 400 V Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 66 kg Characteristics: - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous face grinding surface for optimal grinding of long workpieces - Constant belt tension due to spring-loaded clamping device - Universally applicable for grinding edges, surfaces and cylindrical grinding - Including quick clamping system for fast belt changes - Easy adjustment of the parallel belt run by means of adjustment screw - Graphite coating on the face grinding surface increa ...
CANDY RECYCLING AD 2000 made in 2015 for recycling of Rework from hard candy production suitable also for jelly, toffee, lollies, fondant even wrapped products result after recycling: completely transparent and neutral sugar-glucose syrup-water solution consisting of: dissolving machine intermediate/buffer tank, volume 2000 L with platform horizontal rotary drum vacuum filter unit year 2015 very good condition
Mobile Solar Power MS-2000 (Ref. No. 504-2626) Battery capacity: 600'000 A/h, or 2'220 W/h Power: 2'000W, max. 5'000W Battery Type: ternary lithium-polymer battery Size: 320x230x335mm Adapter: DC 25.5V/8A, 204W max. Solar Power: 18V 10A 180W Recommended design: 100W 17.6V, 5.68A solar panel Direct charging DC: 12V 4.5A AC output: 220V 50Hz/110V 60Hz AC output 3 ports: 2000W, max 5000W Connections: USBX2:5V, 3.1A max. QC3.0X1:5V/3A,9V/2A,12V/1.5A DC output: 12V, 7A max. PD type-C X1: PD 60W, 5V/3a, 9V/3a, 12V/3a, 15V/3a, 20V/2.2A (bidirectional) Cigarette lighter 13V / 10 MS-SP200/200W 200W solar panel as portable power plant 2000W, MS-SP200/200W Peak Power : 200W Efficiency of the cells: MONO >19% Cable length: 2M/14AWG Output : 19V Material: PET+EVA+Solar cell+EVA+PCB+Nylon Color: Black & Orange AC input power supply Vehicle Charger Cable DC 100W ...
Product number: 2783 Type: Titaan 2-90 Serial number: HTN10220019 Year of construction: 2023 Chamber: 840 x 890 x 220 mm Seal bar: 2 x 840 mm Cycle: 30 - 50 sec Vacuum pump: Busch 300 m³/hr Compressed air: 6 Bar, 100 Nl/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2450 x 1100 x 1150 mm Weight: 850 kg Automatic lid and outfeed conveyors Hellings conveyor Type: 12980-10 Serial number: 790311 Year of construction: 2021 Belt width: 600 mm Length: 3000 mm Henkelman diptank Type: 200A Serial number: H0D20220008 Year of construction: 2022 Heating: electric Usable space: 575 x 1100 mm Emersion depth: 200 mm Cycle time: 22 sec Compressed air: 6 Bar, 50 l/min Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 2500 x 1350 mm Weight: 310 kg
Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Aasted Type: AT 2000 disc tempering machine for chocolate YOM: 1971 output: from 750 to 2.000 kg/hour. electrical: 380/400 VAC different: working order I offer this machine in as-is where-is condition
Heavy Belt Conveyor GUF-P 2004 Heavy-duty belt conveyor for applications with particularly high loads and bulky material to be conveyed. -Heavy -Strong -Resilient Conveyed material: bulk material, general cargo loose, carton Transport distance: Straight & incline up to 20° Conveying speed: up to 60 m/min Total load usual: up to 200 kg Deflections: 01, 09 with roller ø 105 mm Belt body profile: mk 2004 Product data: Manufacturer: Maschinenbau Kitz Type: GUF-P 2004 BC 4300/700 Conveyor length: 4300 mm Conveyor width: 700 mm Height: 900 mm Propulsion: SEW Eurodrive Motor SF57 DT80K4 400 V 0.55 kW More items - new and used - can be found in our shop! International shipping costs on request!
TECHNICAL SPECIFICATIONS Manufacturer: HENKE Designation: Production plant for concrete block slabs Type: UNI 2000 Year of construction: 1995 Operating hours: 11,543 h COMPOSED OF: Item 010) Fully automatic rotary table top pressure press UNI 2000/600/7 Item 020) Attachment distribution device for fine-grained attachments Pos. 030) Fully automatic dividing disc dosing unit with 8-fold ejection Item 040) Fully automatic direct washout system "WESER 100/2" for flat laying (horizontal) Item 050) Moulding frame device 400 x 400 mm, 2-fold Pos. 070) 2 x chain conveyor 1.50 m long Item 080/120) Pallet destacker Item 090) Cleaning brush Item 100) Pallet oil roller Item 110) Intermediate transport Pos. 130) Plate removal device Item 160) Stacking arm with bearing block Item 170) Chain conveyor 5 m long Pos. 180) 2 x Plate Pack - Lifting Item 190) Parcel push-off device ...
Ilapak stainless flow wrapper Carrera 2000 PC Stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel.
Tablet press Fette P2000 Tablet output: 250.700/h mechanical speed Number of station: 43 stations Tablet diameter max: 13 mm Compression force max: 80 kN Initial compression force: 20 kN Type of tool : EU Norm BB Height of the machine with filling hopper : 1950 mm Project floor area : 1212 x 1126 Weight: 2200 Kg Year of manufacture :1993
maximum number of results exceeded
please refine your search
