135,411 used machines on RESALE, but how to find them? Machine Search
A vertical EMAG CNC lathe is available. Workpiece length range: 22mm-100mm, turning length: 100mm, max. swing diameter: 220mm, tool stations: 12, measuring length: 94mm, spindle speed: 6500rpm. Machine dimensions X/Y/Z: approx. 2400mm/3300mm/2950mm, weight: approx. 10000kg. Including tool setting probe, chip conveyor, 120bar high-pressure pump, Heilig workpiece shuttle system with two stations and coolant system. Documentation available. An on-site inspection is possible.
A vertical CNC lathe by Emag is available. Workpiece length range: 22mm-100mm, turning length: 100mm, speed: 6500rpm, measuring length: 94mm, max. swing diameter: 220mm, tool stations: 12, weight: approx. 7000kg. Including tool setting probe, carousel workpiece transfer system, chip conveyor and coolant system. Documentation available. An on-site inspection is possible.
A complete electrically heated Hindenlang bale-out furnace system for melting and holding aluminium is offered. Design: stationary, heating shell material: vermiculite, Heating capacity: 45kW, melting capacity: approx. 90kg/h, operating temperature: 720°C, max. temperature: 850°C, furnace chamber temperature limit: 950°C, crucible holder: BU-200/BN-200, crucible support height: 65mm, weight: approx. 1100kg without crucible. Equipment: furnace housing with insulation and meander heating elements, lateral emergency drain, temperature monitoring, switchgear rated up to 80A/55kW, crucible breakage detection system, freeze protection, timer, connecting cables, BU-200 crucible and crucible support. Documentation available. An on-site inspection is possible.
A vertical EMAG CNC turning machine with automation is available. Speed: 6500rpm, workpiece length range: 22mm-100mm, turning length: 100mm, measuring length: 94mm, max. swing diameter: 220mm, max. pump pressure: 120bar, tool stations: 12, loading stations: 2, robot type: M-10iA, control: Fanuc 16i-TB, weight: approx. 10000kg, power-on hours: 84847h. Including high-pressure pump, tool setting probe, chip conveyor, coolant system, workpiece shuttle system and robot automation. Documentation available. An on-site inspection is possible.
Key data: 210 mm, 305 mm, 5000 1/min
12-station turret (non-driven) Tool holder MK 3 Chip conveyor Rod Feed Pipe IRCO DS 34.8 (YOC 2013) Dimensions LxWxH: - Machine 4000 x 1700 x 1700 mm - Feed pipe 5500 x 1300 x 1500 mm Total weight: approx. 4,000 kg
Fully automatic strapping machine DSI DBA 200 Made in Germany. The DBA-200 Automatic Frame Strapping Machine is designed to be very durable due to its robust design, the simple operation and handling, its performance and its sophisticated technology particularly suitable for industrial use. Siemens S7-200 controller. Infinitely adjustable strap tension. Built-in tape storage. Energy-saving design, the motor only runs during strapping operations. Reel holder for quick tape change. Robust construction. Initiators instead of microswitches. Automatic tape threading. With foot switch. Belt width from 9 to 12 mm. Belt tension 5.0 to 80.0 kg. Strapping speed up to 26 straps per minute. Frame size 850 x 600 mm. Product size min. 100 mm (w) x 30 mm (h), max. 850 mm (w) x 600 mm (h). Connection voltage 230 V, 1 phase, 50 Hz. Machine dimensions 1,412 x 600 x 1,545 mm. De ...
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2058; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 394
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Power [PS]: 218; Gross weight [kg]: 1548; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 394
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames, - Noise Rating: 65 dB at 7m and 100% Load, - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final; Gross weight [kg]: 4487; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, - Built-in switch 50/60 Hz, - Sockets: 2x16A, 2x 32A, 1x 63A, 1x 125A; Water Tank Volume [l]: 822
Triangular notching tool, notching side knife, die holder, separating tool, punching tool, punch, punching die, corner notching punch, punching punch, square notching punch, notching punch, notching tool -Withdrawal device: for square notching dies -Dimensions: see photos -Quantity: 2x pullers, 1x with fine thread -Submission/Price: complete -Dimensions each: 200/140/90 mm -Weight: 2.4 kg/pc.
AC400V-200kW Automatic Load Bank , , Rated Voltage: 3P4W AC400V 50/60 Hz, Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz, Power Supply: 3P5W AC400V 50 Hz , Rated Power: 200 kW at 400V , Duty Cycle: Continuois , Cooling Type: Forced Air Cooling , (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.), , Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW, , Wire Connection: , - Load bank input— busbar (star coupling Y”), - Control power input—terminal block, Communication Interface: RS232/RS485; Gross weight [kg]: 400
Semi-automatic pallet wrapping machine manufactured by EAR FLAP, model 200 R27. The equipment incorporates a motorized turntable with a capacity for loads of up to 2,000 kg and a reel carriage with adjustable mechanical brake, and includes a control panel. Technical characteristics Model 200 R27 Year of manufacture 2017 Payload 2,000 L Motor 1 kW 220 V 50 Hz Turntable diameter 1,650 mm Transportation Information Length 2,400 mm Width 1,650 mm Height 2,700 mm No documentation In your state
RIERA NADEU model 200F-1000 centrifuge in 316 stainless steel Technical characteristics Model 200-F1000 Maximum load (density 1.25 kg/dm³) 250 Kg Payload 200 L Maximum speed 1,085 rpm Equipment dimensions Basket diameter 1,000 mm Cake thickness 145 mm Basket height 480 mm No documentation In your state
internal diameter: 120 mm grinding depth: 200 mm swing diameter: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m Grinding diameter, internal, max., approx. 3 - 120 mm Grinding depth, approx. 200 mm Height of centres above rotating workpiece slide 132 mm Max. swing Ø in front of rotating workpiece slide, approx. 450 mm Work spindle admission 40 mm Table stroke, max. (Z axis) 480 mm Workpiece cross adjustment (X axis) 50 mm Turret head cross adjustment (U axis) 50 mm Workspindle head swivelling (B axis) -30 / +45 ° (manual) Speeds of workspindle, infinitely variable 75 - 1,300 rpm Grinding spindle speeds 9,500 - 150,000 rpm Grinding spindle drive 4 kW Total electrical load, approx. 8 kW - 380 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features TRIPET (Bruetsch) CNC Control for 3 axes (Z, X and U) with electric hand wheel, with ...
max. wheel diameter: 0 mm gear width: 120 mm max. module: 3 min. module: 1 total power requirement: 20 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: m : : : : : : 5 machines in stock, YOM: between 1986 and 1990 Gear Æ, min./max. 55 / 120 mm Gear Æ for shaft-formed parts 80 mm Module (pitch 25.4 - 8.5) 1 - 3 No. of teeth, min./max. 13 / 80 Pressure angle 14 - 30 ° Helix angle, max. 40 ° Workpiece clamping length 145 - 420 mm Grinding worm Æ 300 - 400 mm Grinding worm width 25 - 40 mm Grinding worm speeds, infinitely variable (35 m/s) 1,650 rpm Feed range 0.4 - 4 mm/rev Total electrical load 20 kW - 380 V - 50 Hz Weight 7,500 kg Accessories / Special Features REISHAUE ...
max. wheel diameter: 215 mm gear width: 40,65 mm max. module: total power requirement: 20 kW weight of the machine ca.: 10 t Max. external Ø of workpiece 215 mm Tooth profile, height x width 16 x 40.65 mm No. of teeth 5 - 200 Max. tooth ratio 1 : 10 Grinding wheel Ø 51 - 190 mm Grinding wheel speeds 1,000 - 6,000 rpm X Axis (horizontal) 152 mm Y Axis (vertical) 178 mm Z Axis (slide base plate) 304 mm Distance from middle of machine to middle of workspindle 115 mm Axial speed 125 mm/sec Workpiece speeds 0 - 30 rpm Workspindle bore, conical 3 29/32 inch Total electrical load 20 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features FANUC CNC Control, Model 150 MB, for 7 axes, with monitor and direct input. Automatic calculation of all workpiece and grinding parameters. Extensive coolant equipment with filter system, band filter, etc. Driv ...
pressure: 200 t stroke: 400 mm total power requirement: 7,5 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 2.000 x 1.200 x 2.800 mm Control: Producer: HIDROLIKSAN YOM: new Type: HD 160 Thrust: 160 ton. Stroke: 400 mm Throat depth: 480 mm Total power requirement: 5,5 kW Distance between frames: 1.200 mm Cylinder-Ø: 120 mm Dimensions (LxWxH): 1.800 x 1.000 x 2.550 mm Weight: 1.400 kg Additional information: • solid, welded construction • pressure cylinder lateral adjustable • operating electrical per switch lever / • pressure indication per Manometer • material support per cylinder, adjustable in height • CE-mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
square edge steel: 20x20 / 25x25 mm flat steel: 100 x 7.0 mm round bar steel: 22.0 / 27.0 mm L-beam: 100 x 10 mm weight of the machine ca.: 33.0 kg. range L-W-H: 900 x 430 x 310 mm Features - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - Bending performance cold : Flat steel 100 x 7 mm 65 x 12 mm Round steel 22.0 mm Square steel 20 x 20 mm Angle steel 100 x 10 mm - - - - - Bending capacity hot : Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 15 mm - - - - - Scope of delivery - Bending plate - Angle stop stepless - Clamping block with ...
plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t chamfer lenght: 3600 mm distance between columns: 2650 mm dayligth: 500 mm throat: 300 mm stroke: 250 mm working feed: 10,5 mm/sec return speed: 100 mm/sec ram stroke speed: 150 mm/sec table height: 900 mm oil volume: 500 l total power requirement: 37 kW weight of the machine ca.: 17800 kg dimensions of the machine ca.: 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 300 mm dayligth: 440 mm working feed: 9.0 mm/sec return speed: 80.0 mm/sec : 265 bar Control: konv. work height max.: 965 mm total power requirement: 15.0 kW weight: 10500 kg range L-W-H: 3360 x 1750 x 2800 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism - Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal ...
Key data: 200 mm
Hydraulic Machine Vise Hilma 200 mm - 360° rotatable Made in Germany. Jaw width 200 mm. Clamping range up to 348 mm. Jaw height approx. 68 mm. 360° turntable with degree scale. Footplate 370 x 400mm Weight 120 kg.
Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...
Key data: 200 mm
Hydraulic machine vise Hilma 200 mm - 360° rotatable. Hilma 3741-05. Made in Germany. Jaw width 200 mm. Jaw height approx. 68 mm. Clamping range up to 348 mm. 360° turntable with degree scale. Base plate 370x 400 mm. Weight 120 kg.
Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...
Impulse Pumps proudly presents the SIP 200-8HP, an exceptional addition to our esteemed SIP-series range. This pumpset is meticulously engineered to provide unparalleled pumping capabilities, especially when it comes to handling higher discharge heads. With the SIP 200-8HP, you can experience enhanced performance and conquer even the most challenging pumping tasks with ease., , Equipped with a robust JCB 448 diesel engine, the SIP 200-8HP delivers outstanding power and reliability. This engine, combined with Impulse’s cutting-edge technology, ensures optimal performance even under demanding conditions. You can trust our pumpset to meet the highest emission regulations while prioritizing safety, empowering you to operate efficiently and confidently., , Navigating complex equipment is a thing of the past. The user-friendly Ecomizer-Pro pump controller by Impulse provides real-time insigh ...
turning diameter: 210 / 350 mm turning length: 400 mm control: Fanuc 0i-TC swing diameter: 500 mm travel -x axis: 195 mm travel -z axis: 430 mm spindle speed:: 3500 1/min spindle bore: 75 mm bar diameter: 51 mm C-Axis: 0,001 ° turret head: 12 Pos. taper in tailstock-quill: MK 4 tailstock travel: 100 mm diameter of quill: 80 mm rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 30 m/min drive capacity - spindle motor: 11 / 15 kW voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,70 x 1,90 x 2,10 m chip conveyor: 2,80 x 0,60 x 1,30 m Transformer: 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (1x radial + 1x axial in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - O ...
grinding length: 2500 mm grinding width: 600 mm workpiece height: 800 mm Table dimensions: 2500x600 mm vertical movement: 800 mm throat: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m filter system The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTec ...
swing diameter: 200 mm centre height: 300 mm weight of the machine ca.: 75 kg dimensions of the machine ca.: m hydraulic steady rest width of arms 40 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 200 mm turning length: 400 mm control: Siemens type: C 200-4 840 C spindle passage: 65 mm Tool changer: 2 x14 Pos. Turret 12-fold, 12 stations: c-axis: live tooling: 2x Revoler total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Main and counter spindle 3-jaw chuck with numerous jaws Hainbuch collets Many tool holders Various driven tools Bar loader Index MBL Chip conveyor with coolant unit Complete set of spindle reducers etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, o ...
turning diameter: 290 mm turning length: 850 mm swing diameter: 600 mm control: Siemens type: 840 D mm spindle passage: 103 mm turning speeds: 3000 U/min live tooling: 3000 U/min rapid travel - grinding spindle: 25 m/min total power requirement: 65 kW weight of the machine ca.: 11 t dimensions of the machine ca.: m Serial No. 1130.2011-30 Equipment: Main spindle / counter spindle 2 power chucks 2 tool turrets C-axis Cabin Chip conveyor Coolant system 22 bar Offer price without tools Optional accessories available for purchase: 106 tool holders for internal and external machining, 20 driven tools (including 10 angle tools) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane c ...
Bosch Bremsmodul EBX 200-T Nr. 057914-111 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Type: Deburring Machine Manufacturer: Vangroenweghe Type: T-200-2K/B Year of Make: 2014 Condition: used Offer will only be sent if a complete imprint is provided! Price 9.750 Euro incl. 19% VAT Location Warstein , Germany Reference number M-VAN-0726 DESCRIPTION We offer you a used deburring machine from the manufacturer Vangroenweghe. For technical data, see last picture. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved
Deighton forming machine, Type: Formatic R2200 / 180, Serial number: R2200/22/10/368, Capacity: max 4400 products per hour, Hopper: 20 litres, Belt width: 120 mm, Power: 230VAC, 1Ph, 50Hz, 0.75kW, Dimensions: 1150 x 900 x 1500 mm, Weight: 95 kg, Deighton flattening conveyor, Type: FL, Serial number: FL 16/04/036, Belt width: 175 mm, Power: 230VAC, 1Ph, 50Hz, 0.18kW, Dimensions:1450 x 650 x 1200mm, Weight: 48 kg, Deighton preduster, Type: 200W Econodust M/C, Serial number: ED 22/09/068, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.51kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton battering machine, Type: 200W weir Econorobe M/C, Serial number: WER 22/09/067, Belt width: 200 mm, Power: 3 x 400V, 50Hz, 0.88kW, Dimensions: 1600 x 950 x 1400 mm, Weight: 140 kg, Deighton mixer, Type: Batter mixer, Serial number: M 22/10/073, Mixer: 200 litres, Power: 230VAC, 1Ph, 50Hz, 1.5kW, Di ...
A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible.
200 litre stainless steel tank single-walled container, open at the top
200 litre stainless steel tank Manufacturer : Ahrens & Bode Type: Pressure Vessel Content: 200 litres Technical specifications : cylindrical stainless steel container on feet, single-walled Conical spout Operating pressure up to 5 bar Dimensions: approx. Diameter: 360 mm, diameter lid 500 mm, cone 400 mm Cylindrical height: 1,840 mm Enema: 3x DN 50 Discharge: DN 65
Key data: 660 mm, 1495 mm
Mazak Integrex 200-lV ST CNC turning-milling center with second spindle CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Spindle speed 35 - 5000 rpm Spindle speed sub spindle 35 - 5000 rpm Milling head speed 15 - 21,500 rpm X-axis travel 580 mm Y-axis travel 160 mm Travel of the Z-axis 1,545 mm Travel of the B-axis 225 ° C-axis indexing 0.0001° (360°) Tool Taper Capto C6 Number of tools in the magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.
BORCHE BS 200 injection moulding machine was built in 2018 in China by BORCHE BORCH MACHINERY CO., LTD. The machine is designed for the efficient production of technical components and everyday products made from plastics of various shapes and for various purposes. A clamping force of 200 tonnes, combined with reliable components, ensures high efficiency even during intensive mass production. The parts are made by injection moulding, a process which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. This method enables the rapid production of parts with complex geometries whilst maintaining high repeatability and a high-quality finished product. The BORCHE BS200-III Plus injection moulding machine can be further equipped with production automation systems that increase the efficiency of the entire ...
Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter -Type: R 265.2-200M -Mount: Ø 60 mm / Bolt circle Ø 102 x 18 mm -Dimensions: Ø 205 x 62 mm -Weight: 8.6 kg
Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-200 L , Capacity: 210 Litres , Coo ...
Mengele paternoster with 42 shelves High-quality, extremely space-saving vertical carousel rack (storage paternoster) from the renowned manufacturer Karl Mengele & Söhne The system works according to the paternoster principle and brings the stored goods directly to the ergonomic removal opening at the touch of a button. Perfectly suited for tools, spare parts, small parts storage or documents in the workshop, warehouse or archive. Technical data at a glance: • Manufacturer: Karl Mengele & Söhne • Type designation: 130-200/12 • Number of shelves: 42 pieces • Maximum permissible shelf load: 100 kg (per tray) • Permissible maximum bay load: 4,200 kg (total load capacity) • Nominal consumption / power: 3,000 W (3 kW) • Connection: 380 V (three-phase / high-voltage) / fuse 16 A • Permissible unload: up to 20% • Year of manufacture: 1985 Dimensions ...
TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, Connected and running., conditions: used - running, working width: 1600, availability: February 2026
Features Volume 6200 L Material No. V2A Total height 2050 mm Cylinder height 1740 mm Outer diameter 1740 mm Depth 2700 mm Description Tank crest: Weld-on nozzle DN50 Front: Cone base Tasting tap Manhole 410 x 320 Nozzle Flap Size 37 Rear: Cone base Underbody: Residual drain pipe with angled seat valve DN50 2 bearing cups
Combined heat and power plant (CHP) for natural gas operation Manufacturer: Viessmann Year of Make: 2017 Operating hours: 22,334 h Plant starts: 2580 Electrical power: 8.5 kW Thermal power: 20.1 kW Energy input H: 30.1 kW Electrical self-consumption max.: 0.15 kW Flow temperature min./max.: 50/85 °C Return temperature min./max.: 30/65 °C Permissible operating pressure: 1 MPa (10 bar) Condition and availability: The CHP unit is in a well-maintained condition and is immediately available. This system is particularly suitable for economical and self-sufficient heat and power supply in small to medium-sized applications.
Features Volume 6200 L Material No. V2A Total height 1900 mm Cylinder height 1700 mm Outer diameter 1740 mm Depth 2700 mm Cooling jacket design Description Tank crest: Weld-on nozzle DN50 rear Front: Cone base Tasting tap Manhole oval 420 x 310 Nozzle Flap Size 37 Residual drain pipe DN50 with angled seat valve Rear: Cone base Underbody: 2 bearing cups
: gebraucht : 2907D : prompt, Zwischenverkauf v : Taiwan : 945 € : 1 : 200 mm : 62 mm : 300 mm : 110 kg : 8500 kg MINT CONDITION with turning base accurate adjustment of clamping force by use of a dial cast iron body hardened and ground slideways vice jaws made of special hardened alloy steel are precision ground (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
