wd 200 used for sale

Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Un ...

Press force: 250kN, ram stroke: 8mm-80mm, stroke rate: 180/min, installation height: 310mm, table dimensions X/Y: 550mm/400mm, ram dimensions X/Y: 355mm/220mm, machine dimensions X/Y/Z: approx. 1100mm/1400mm/2300mm, weight: approx. 2500kg. An on-site inspection is possible.

ID3738 Witte Bohrtechnik VSB500-200 year/Baujahr 1991 Trailer-mounted well drilling rig, Hatz engine, 2 hydraulic pumps, direct rotary head, with flushing pump (auxiliary pump) – with Hatz engine, previously drilled to a depth of 60 m – 160/170 mm Trailer well drill, Hatz engine, 2 hydr. Pumps, direct rotary head, with mud pump (auxiliary pump) - with Hatz motor, drilled with it so far: 60 m depth - 160/170 mm

A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible.

Ref. no.: 18588 Hersteller: BATTENFELD Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg

turning diameter: 380 mm turning length: 580 mm swing dia.: 695 mm X-Axis movement: 234 mm Y-Axis movement: 100 mm Z-Axis movement: 575 mm Minimum indexing C-Axis main Spindle: 0,0001 ° Number of tools on turret: 12 Number of driven tools: 12 x Spindle speed driven tools: 4500 1/min Spindle motor driven tools: 5,5 / 3,7 kW Tool type: Mazak VDI control: MATRIX NEXUS II Main Spindle:: Spindle Speed: 5000 1/min spindle motor: 26 / 22 kW spindle bore diameter: 76 mm 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW spindle bore: 80 mm total power requirement: 43 kVA Weight: 5,5 t dimensions of the machine ca.: 2,8 x 2,1 x 1,9 m - Mazatrol Nexus II CNC control - Main and counter spindle - 12-station tool turret with driven tools and Y-axis - 3-jaw chuck -- Main: 8 -- Counter: 6 - Automatic presetting (Tool Eye). - Automatic workpiece catcher. - Side belt chip ...

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

pressure: 4000 kN table length: 2500 mm table width: 2000 mm dayligth: 2500 mm stroke: 2600 mm tank capacity: 1000 l total power requirement: 56 kVA weight of the machine ca.: 85 t dimensions of the machine ca.: 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 11500 mm y-travel: 4500 mm w-axis: 1600 mm z-axis: 2000 mm spindle diameter: 200 mm Rotary table: E25OB23941 2.000x 2.000 mm bed length turntable: 4600 mm tool taper: SK50 : 80 t Plate field size: 10.000 x 15.000 mm tool taper: SK 50 total power requirement: 83 kW weight of the machine ca.: t incl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Edge sanding machine HOLZKRAFT KSO 200 F- Exhibition machine - relief rollers on the stop rulers, with swivelling sanding unit, and oscillating sanding belt, veneer sanding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding roller---------- Technical data ---------- sanding belt dimensions: 3,000 x 200 mm, work table dimensions: 960 x 350 mm, work table height adjustment: 230 mm, sanding surface: 1,050 x 300 mm, belt speed: 20 m/sec.,

B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 120MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC

Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...

(1970) 200t Müller-Weingarten Eccentric Press Heavy-Duty Eccentric Press for High-Capacity Industrial Forming This powerful 1970 mechanical press is engineered for heavy-gauge metalworking, offering a significant 200-ton pressing capacity and a maximum sheet thickness of 28 mm. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: AR 200 Year of Manufacture: 1970 Nominal Force: 200t Max. Thickness: 28 mm Stroke Rate: 32 strokes/min Ram Stroke: 40 – 180 mm Ram Adjustment: 110 mm

(1980) 200t Paul Müller Eccentric Press Heavy-Duty Eccentric Press for Cold Forming This Paul Müller press delivers a robust 2,000 kN pressing force and features a versatile adjustable stroke range of 20 to 140 mm. Technical Details Machine Type: Eccentric Press Manufacturer: Paul Müller Model: EXP 200 R Machine Number: 11380 Year of Manufacture: 1980 Nominal Force: 200t Throat Depth: 400 mm Stroke Rate: 40 strokes/min Adjustable Stroke Range: 20 – 140 mm Ram Adjustment: 80 mm Max. Distance (Table to Ram): 530 mm Table Dimensions (W x D): 1,120 x 780 mm Ram Surface Area (W x D): 700 x 400 mm Bed Hole (Bolster Opening): 360 x 230 mm Motor Output: 18.5 kW Operating Voltage: 380 V Total Weight: 12,500 kg

High-performance, completely stainless steel automatic grinder for industrial applications., Ideal for meat processing, pet food, and other protein-based products. Available immediately., Used machine from Seydelmann, overhauled in 2025 and not in use since., Largely rust-free, 2-turn working auger, 3-turn feed screw, - With 200 mm diameter perforated discs, - Control cabinet installed, - Dual-stage thermal overload control, 1. Impulse reduces feeder speed, 2. Pulse switches off main motor, - Approx. 400 liter funnel, - Conical feed screw made of stainless steel, Special casting, perpendicular to the working screw, - Solid stainless steel worm housing with hardened running surfaces, - Stainless steel bayonet fitting, - Electrically locked spillage hand guard, - Rocker switch on the top edge of the funnel, - Machine stand closed at the bottom with ventilation system, Three-phase motor IP  ...

Single beam X-ray inspection device,, was used for cylindrical jars and cans,, Capacity: approx. 150 glasses / min,, with ejection of contaminated containers,, with conveyor belt,, in use until 04/2024.

Fumex Extraction Arm Model: Fumex PSS 3000-200 Year of construction: 2024 ATEX certification: II 2G Ex h IIC T6 Gb – for explosive gas atmospheres II 2D Ex h IIIC T75°C Db – for explosive dust atmospheres (nameplate) Manufacturer: Fumex, Application: Point suction / process extraction, visibly mounted with flexible extraction arm (Images) Cleanroom / Pharma

AUTOMATIC DOUBLE END TENONERS machine model CELASCHI 200 L second hand machine 380/50 volts opening mm. 3000 composed of 3+3 units : 1+1 scoring unit 1+1 hogging unit 1+1 spindle moulder unit electronic opening positioner HF converter separate electrical panel

Used standard trolleys 200 litres Tared 40 kg

turning diameter: 400 mm turning length: 1000 mm control: FAGOR control: CNC 8055/B-T centre height: 200 mm centre distance: 1000 mm turning dia. over face-slide: 210 mm bed width: 300 mm spindle bore: 65 mm spindle turning speed range: 0 - 3000 U/min transmission ratio: 2 feeds - longitudinal: 0 - 10.000 mm/min feeds - cross: 0 - 10.000 mm/min rapid travel - longitudinal/face: 15 m/min tailstock quill diameter: 68 mm tailstock quill stroke: 155 mm tailstock taper MT: 4 total power requirement: 8 kW weight of the machine ca.: t dimensions: 3,1 x 1,9 x 1,78 m Accessories: 3-jaw chuck 200 mmø, MULTIFIX-tool post with various inserts, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 KW, 250 kVA, 400 V

Gas-fired syngas power plant. New, custom-made units from 100 to 500 kW. 1) Generates syngas from wood and agricultural waste. 2) Uses fine gas purification. 3) Uses biogas generators. 4) Fully autonomous. 5) Fuel consumption: 1.2-1.6 kg/kWh. 6) Low internal energy consumption. 7) High process control. 8) CE certified. If you have wood waste, husks, or peelings, you can generate electricity. For more information, contact us via WhatsApp at +38 050 323 99 22 or smartnrggroup@gmail.com.

Manufacturer: Engel Model: ES 200/90 HL Year of Manufacture: 1999 Type of Machine : Injection Moulding Machine Machine Weight: 5,900 kg Find more here - / Contact us at -

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 300 mm dayligth: 440 mm working feed: 9.0 mm/sec return speed: 80.0 mm/sec : 265 bar Control: konv. work height max.: 965 mm total power requirement: 15.0 kW weight: 10500 kg range L-W-H: 3360 x 1750 x 2800 mm Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism - Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal V-die block, reversible with anti-corrosion grease V openings in mm : 12/35/25 50 1 ...

Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...

Several spare parts for a GEA Westfalia MSA 200-01-076 separator., Type of Machine: Spare parts separator

The Scanima SFM-200 is a simple mixing solution with a compact design at a lower cost for higher capacity production. The powder dissolver secure efficient mixing of liquids, including emulsification. It is also ideal for mixing concentrates and minerals into base concentrates and slurries, for example oils into non fat milk concentrates. The mixers can handle products up to 300 cP. The main product is pumped through the mixer. Additives are pumped into the main stream by the inlet pipe. Mixing then takes place and the blended product passes through the turbo unit for final mixing before it goes to the outfeed. Motor power: 15 kW. Input pressure: - 0,8 / + 1,0 Bar. Input temperature: 0 / + 120 °C. Output pressure: -0 / + 2,0 Bar. Output temperature: 0 / + 120 °C., Additional features:, Excluding:, - Hopper, Type of Machine: Powder dissolver, Capacity: up to 25.000 ltr/h depending on pr ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (37 kW), motor cover, base plate, feet, desludge tank, inlet/outlet pipes, service tools for maintenance including pressing tool and several spare parts., Additional features:, Excluding:, - Control panel., - Water valves., Type of Machine: Cream Separator / Skimmer, Capacity: 25.000 liter per hour, Bowl speed: 4.500 rpm, Motor: 37 kW - 460 V - 60 Hz - 1.775 rpm - 61 A, Weight: 2.850 kg, Dimensions: 195 x 130 x 225 cm

Unused gear wheel for a Westfalia MSA 200-01-076 skimming separator. Article number: 1166 3447 020. For a 50 Hz driven machine., Type of Machine: Gear Wheel, Drive line: 50 Hz, Condition: Never used

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV W 50/50), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ032, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 642, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV P ...

Milk pasteurisation line of 25.000 ltr/h with cream separator / skimmer. Temperature cylce: ± 3/4° (in) - regeneration - ± 55 °C (separator) - ± 72/75 °C (pasteurisation) - holding - regeneration - ± 3/4 °C (out). Line existing out of open level tank (2x lid, spraybowl), product pump (APV Puma), digital flow transmitter (Yokogawa FLXA402), Transmitter (Rosemount 8712) plate heat exchanger (APV N35 RKS, year: 2004, serial nr 1286, drawing no: NZ0321, 4 sections, working pressure 6 bar), cream separator / skimmer (Westfalia MSA200-01-076, year 1980, serial nr 1669 641, self cleaning, bowl, motor (37 kW), motor cover, base plate with feet, water valves (original Westfalia), control panel including original GEA operation panel, all inlet / outlet pipes with pumps, flow indicator and service tools for maintenance including pressing tool), holding tube with slope, booster pump (APV Pum ...

Gear shapping machine LIEBHERR LFS 200

Diosna Lifting Kneader D 200 / 2G usedThe Diosna D 200/2G is a powerful kneading machine that is designed for use in bakeries and pastry shops. Â With a boiler volume of 200 liters and a capacity of 2 speeds, the lifting kneader is suitable for the production of dough in large quantities. The robust construction and high-quality materials ensure a reliable and durable machine. With a lifting kneading machine such as the Diosna D 200/2G, high-quality doughs can be kneaded efficiently and evenly. DescriptionLifting kneader Diosna D

used lifting mixer Diosna D 200 / 2GBdescriptionLifting mixer Diosna D 200 / 2G with fixed kettleManufacturer: Diosna Dierks &, Söhne GmbHTyp: D 200 / 2GMit stainless steel kettle and lifting armKettle for max. 200 kg dough or for max. 125 kg flour2 speeds slow and fastMoving on castorsWith 1 timer380 Volt 7.1A 50HzThe Diosna D 200/2G is a powerful kneading machine designed for use in bakeries and confectioneries. With a boiler volume of 200 liters and a capacity of 2 speeds, the lifting kneader is suitable for the production of

Flour mills Rotormat Bio-200Manufacturer : HommelType : Bio-200GRINDING TURBINE ROTORMATTtype:BIO 200Grinding capacity approx. kg/hour fine80 - 100Grinding capacity approx. kg/hour medium120 - 150Grinding capacity approx. kg/hour coarse150 - 200Natural stone:highly wear-resistant200 mm DiameterPower:3 KW 4 PSconnected load:400 VTrichter capacity:approx. 40 kg GrainWeight:approx. 80 kgDimensions cm:100 x 60 x 135Â For details see pictures.

Spiral mixer extendable Kemper SPA 200Manufacturer : KemperType : SPA 200200 kg flour 320 kg dough2 watchesstainless steel kettle and spiral with 3 extendable kettle 1 kettle has cracksDetails see picture 

ALU Puller with Cloth for 200 cm Deep Stoves NewProduct DescriptionCondition: NewMaterial Puller: AluminumSuitable for 200 cm Deep StovesWith Side FasteningDimensions Puller: Width 58 cm, Length 240 cm, Height 5.6 cmDimensions Cloth: Width 56 cm, Total Length 470 cmDetails see pictures.

Lifting tipper Kemper HK 200 RD Manufacturer : Kemper Type : HK 200 RD Year of construction : 2011 Tipping height approx. 250cm Dimensions approx. W: 195cm D: 150cm H: 360cm for WP DK 250 Baker's condition Details see picture

Lifting kneader Diosna D 200 Plus Description Lifting kneader Diosna D 200 Plus with fixed boiler Manufacturer: Diosna Dierks &, Söhne GmbH Type: D 200 Plus Condition: revised and repainted With stainless steel kettle Kettle for max. 200 kg dough or for max. 125 kg flour 2 speeds slow and fast With flour dust cover Mobile on casters Machine completely repainted With stainless steel control box With 1 timer NEW Many parts renewed Boiler polished 380 Volt 

(2 pairs) Oven gloves Baker's gloves Heat-resistant +200 Âcf glove with cuff made of linen fabric grey, heat-resistant up to +200 Âcnot machine washable, approx. 36 cm long, 1 pair We have a larger number in stockDetails see picture

Cake ring made of aluminium à ̃ x H: 200 x 60 mm NEW ( 10 pieces )Dimensions: à ̃ x H: 200 x 60 mmMaterial thickness: 2.0 mmDetails see picture

4 Ink Pumps Complete Technotrans TB 200-15/9 Ink Pump Year 2007 Capacity 200kg bins Air Pressure: 8bar

pressure: 200 t nominal power: 2000 kN stroke length max.: 1700 mm working feed: 50 mm/sec weight of tools max.: 50000 kg voltage: 400 V table-size: 4.800 x 2.400 mm total power requirement: 99 kW weight of the machine ca.: 113 t dimensions of the machine ca.: m passage width: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton

Model: KMRS-200 Year: 2016 Condition: Used Serial Number: 17508-001 Stock Number: 2969 Capacity: 700 pc/h Belt width: 325 mm Diameter cutting ring; 270 mm CIP unit hot water min. 60 degrees Celsius Compressed air:5 Bar, 3.5 Nm³/h Power: 3 x 400V, 50Hz, 2kW Dimensions: 1600 x 1150 x 1500 mm

A manual screen printing machine Eickmeyer is available. Material thickness range: 2mm-25mm, max. printing dimensions X/Y: 1700mm/700mm, machine dimensions X/Y/Z: approx. 2650mm/2100mm/1500mm. An on-site inspection is possible.

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg

Used Netzsch pearl mill type LME 200.The mill has a cooling jacket. Year of construction 1989.

A nearly new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital. Documentation available. An on-site inspection is possible.