wd 200 used for sale

Working length: 2040mm, max. cutting capacity: 3mm, stroke rate: 30strokes/min, table height: approx. 850mm, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 2400mm/2000mm/1450mm, weight: approx. 1500kg. An on site inspection is possible.

A Schechtl swing bending machine for sheet metal processing is available. Working length: 2040mm, opening height: 140mm, bending capacity: 3mm, bending speed: 50°/s, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 3000mm/750mm/1250mm, weight: approx. 2750kg. On-site inspection is possible.

Technical data: Maximum pressure: 60 tons Year of Make: 1999 Press force: 72.7 t/cm² Number of Bindings: 4 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1400 mm Bale weight: 450-650 kg Weight: approx. 20 tons Power connection: 400 V/ 45 kW Bale tying: automatic Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Choice of the length of the finished bale Press plate stably guided on the large rollers Large flaps of the bale chamber for easy maintenance If you have any further questions about this or similar channel balers, please do not hesitate to contact us by email or phone!

Features: Volume 11200 L Material V2A (AISI 304) 1.4301 Manufacturer: Rieger Cubic design Number of feet 4 Total height 2500 mm Length 5250 mm Width 1450 mm Surface marbled on the outside Surface inside IIID Last Use Food Description Topsoil: Flat bottom 1 reinforcement profile in the middle 4 crane eyes Airlock DN50 Cylinder: 4 cool pockets on the side Level indicator with bar and scale Manhole oval Tasting tap Nozzle Flap Size 37 Ladder hooks Sewage drain DN50 with angled seat valve Underbody: Flat bottom with 3% slope forward-drawn outlet surround with disc valve DN50 4 profile feet with domes – height-adjustable 4 reinforcement profiles

- Producer Schuko - Type FATi-SR 200/30 - Width ~ 3000 mm - Height ~ 2.100 mm - Height with ventilator 2.690 mm - Depth ~ 900 mm - Trockenabsaugung - With filter mat - With paper prefilter - With exhauster - Ventilation system performance, exhaust fan 8.900 m³/h - Motor power 2,6 kW - Exhaust pipe 350 mm - Without switch - Ausführung/Schutzart EExe ii, T3 - In zinc plated steel - Voltage / HZ 400/50 - Location on stock

Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Year of Manufacture: 2015 Electrical Output: 70 kW Electrical Input Power: 116 kW Thermal Output: 204 kW Energy Efficiency Class: H Maximum Flow Temperature: 90 °C Maximum Return Temperature: 70 °C Maximum Operating Pressure: 10 bar Electrical Connection: 400 V / 50 Hz Maximum Current: 144 A Condition:Used. The system is fully functional except for the AWT Find more here - / Contact us at -

All-Fill Series 200 Twin Head Automatic Filling machine Find more here - / Contact us at -

CONTROLS   CNC controls MAZATROL MATRIX 2 BASIC FUNCTIONS   number of spindles: 2   number of turrets: 2   live positions: yes WORKING RANGE TURNING   swing diameter (max): 370 mm   turning diameter (max): 344 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min   drive power: 22 kW COUNTER SPINDLE   spindle revolutions (max): 5000 /min   drive power: 22 kW X/Z SLIDE   Z-axis travel: 760 mm   X-axis travel: 207 mm   Y-axis travel: 100 mm   - rotation speeds (max): 6000 /min X/Z SLIDE   Z-axis travel: 815 mm   X-axis travel: 141 mm   Y-axis travel: 70 mm ATTACHMENTS (TURNING)   chip conveyor: yes   European CE standards: yes • Robot interface• Automatic door• Tool setter on the ...

Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale You are welcome to make me an offer for the parts such as crankshaft etc!

Refurbished SEMT PIELSTICK 8PA4 V 200 VG Engine Block in Parts for Sale You are welcome to make me an offer for the parts such as crankshaft etc!

Manufacturer: Manroland Model: 200 E Hi Print Year of Manufacture: 2008 Total Impressions: 17,000,000 Operating hours : 15372 Find more here - / Contact us at -

Key data: 600 kN, 94 g/PS, 30 mm

1.0 St. gebr. Injection Molding Machine with Robot Manufacturer: DEMAG Type: ET60-200 Concept Year of Make: 2003 Clamping force: 60 tons Spar spacing 420 x 420 mm Screws DN: 30 mm Max. displacement: 106 cm³ Moulded part weight: 94 g/hp Control: NC5 Equipment: Robot manufacturer: WITTMANN, type: W621-1381 2 pcs core train

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. CONDITION : MOTOR DAMAGED NEED TO REPLACEMENT THE NEW MOTOR

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. information contact: Ms.Supawadee Kumpone, Manager Procurement, F6 email: supawadeegreatglove.com Tel : +6693-7478585 Office : +6676-620190 Ext : 194 Ms.Wilawan Sakulsongboonsisri, DGM Finance,F6 Tel : +6689-1969222 Office : +6676-620190 Ext : 111

Type AL 200 SD, inlet/outlet 200 mm, housing full stainless steel 1.4408 - flange connection DIN PN 10, Rotor volume 10.5 liters, direct heat SEW 0.55 KW, discharge speed 20 rpm

Edge banding machine Type: EDGETEQ S-200 Manufacturer: Homag Year: 2018 Hours: 540 Machine in very good condition, under power Find more here - / Contact us at -

Ref. no.: 18587 Hersteller: FERROMATIK MILACRON Year of construction: 2001 Clamping unit Clamping force: 200 ton Opening stroke: 750 mm Distance between tie bars: 560 x 560 mm Mould height min.: 300 mm Opening width: 1050 mm Platen size (h x v): 830 x 830 mm Injection unit Screw diameter: 50 mm Injection volume: 416 cm³ Shot weight: 375 g Measurements and weight Dimensions: 6,9 x 2,0 x 2,6 m Machine weight: 13000 kg

Offer 25434 Technical data: - Working range of the axes - X (longitudinal) / Y (transverse) / Z (vertical) 750 / 380 / 380 mm - Table dimensions 1300 x 300 mm - Tool holder ISO 40 - Autom. Quill feed - Quill stroke - Wind cutting device 140 mm - Distance vertical spindle – table 20 - 540 mm - Working spindle speeds 80 - 3800 rpm - Feed X – Y and Z axis - Rapid traverse 1400 mm/min - Swivelling vertical milling head 45° left + right - Swivel upper arm 360 ° - Coolant device - Drive 400 V / 5.0 kW - Space requirement approx. W 2000 x H 2500 x D 2100 mm - Weight approx. 2200 kg - Separate workbench / tool cabinet with various accessories

Complete line for mixing/granulating, sieving and drying/pellet coating of powder, consisting of • Glatt VG PRO 200 mixing granulator - Gross volume 209 L - Usable volume 60-160 L, 36-96 kg at a density of 0.6 kg/dm3 - Container pressure shock resistance 12 bar - Mixing blade drive 15 kW, 10-200 rpm - Chopper drive 5.5 kW, 3,000 rpm - Protection class IP65 - Mixer with explosion protection EX II 3G (Zone 2), motors EEX, control cabinet NON EX - Product-contact seals in elastomer - Product-contact parts in AISI 318LN/1.4462, AISI 316L/1.4435, AISI 316L/1.4404 - Powder vacuum feed, feed pipe DN 50 - Pneumatic discharge valve - Liquid feed via spray system with peristaltic pump - WIP via rotating cleaning nozzles with WIP rack - Qualification support package (DQ/IQ) - GlattView 19 operation panel • Glatt GSE PRO 200 rotary sieve - Capacity 100-1,500 kg/h - Rotor  ...

Pump is new and unused, assembled by manufacturer, , The SIP-series Screw Impeller Pumps are the do it all” pumps and have become very popular to use in all kinds of wet-construction works. It was just this set-up that has become the middle-man” between the very big market of hi-fuel consuming centrifugal dewatering pumps compared with the very specialized market of super-efficient low-fuel consuming piston pumps. Our 4-inch SIP 100-4 pump set was specially developed to be able to run successfully and efficiently on well-point dewatering without losing its flow while pumping a mixture of water and air. Designed and desired to excel in a wide range of works, our entire range of SIP-series centrifugal pumps handle today’s tough job site conditions. – Impressive solid handling capabilities make them ideal for wastewater, sewerage, mud, and so many more applications you can’t even ...

pressure: 200 t table length: 1600 mm table width: 1300 mm dayligth: 1800 mm Control: Simatic ram return capacity: 6000 kg table load capacity: 7000 kp total power requirement: ? ca. 25-30 kW weight of the machine ca.: 19 t dimensions of the machine ca.: 2,95 5 6 m Special price 49,900 EUR from foundation upon acceptance until January 30, 2026. Normal price from warehouse. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure,, Extraction N183,, Cooling and cleaning device for dielectric,, Automatic fire extinguishing device,, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading, 1 set of gripper fingers for workpiece automation HSK 63/SK40, Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A,, 1 exchange element with flange,, 1 x flushing kit,, Test bar, X axis travel: 440 mm, B-axis: +/- 15°, Y axis travel: 876 mm, Z-axis travel: 420 mm, E-axis swivel range: 210°, A-axis rotation range: 360°, workpiece carrier base: SK 50, workpiece length max.: 200 mm, Workpiece diameter max.: 250 mm, workpiece weight: 15 kg, Connected load approx.: 6.7 kW 400V/50 Hz, Weight approx: 7000 kg, Dimensions W x D x H =: 1987  ...

Manufacturer: FEI Model: QUANTA 200 Type: FP 2012/11 Type of Machine : Scanning Electron Microscope (SEM) Power Requirements: 210–240 V, 50/60 Hz, 15 A Certification: CE Features & Capabilities: - Operates in high vacuum, low vacuum, and ESEM (Environmental SEM) at atmospheric pressure - Equipped with SE (Secondary Electron) and BSE (Backscattered Electron) detectors for all vacuum modes - Includes Peltier cooling stage for temperature-controlled sample testing Accessories & Inclusions: - User manual and full set of original documentation - Two EDWARDS vacuum pumps - Original FEI software, plus: - Second PC (clone of the original) - HD clone with backup installation software - Complete software and hardware support materials Maintenance History: - Last manufacturer maintenance: August 2023 Find more here - / Contact us at -

Features Volume 60200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7700 mm Height 5330 mm Diameter width 3500 mm Weight 3500 kg Surface inside 2B=IIIC ground Surface on the outside semi-marbled Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 to DN 40 Sprinkler ring Vent nozzle DN 50 (airlock) Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 350x450 mm Sample tap DN 15 Ladder hook at the top Dip Shank Sleeve DN 15 for Temperature Display Downward-swept CIP cable with vent cable DN 40, with connection thread DN 50 according to DIN 11851 Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn curved surround with angled seat valve DN 50 - outlet pipe DN 100 reduced to DN 50 with flange  ...

A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.

Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Angled dowels and picket holes are easy thanks to the rotatable drilling unit realizable. Motor pole-switchable, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Start of the motor with practical handle switch Precision Chuck with Two Inserts 16mm and M10 Thread Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing The desired drilling heights can be achieved for each drilling level with a handwheel and digital counter , the changeover is then pneumatically done from the front Transve ...

A fully autonomous CNC dual-spindle turning machine Index is available. Turning diameter: 220mm, main spindle bar capacity: 65mm, main spindle power chuck diameter: 210mm, sub-spindle bar capacity: 60mm, sub-spindle power chuck diameter: 210mm, tool stations: 12, Y-axis travel: 120mm, gripper diameter range: 4mm-45mm/40mm-65mm, coolant pump pressure: 8bar, high-pressure pump capacity: 80bar, chip conveyor discharge height: 1250mm. Overall system dimensions X/Y/Z: approx. 9150mm/4350mm/2000mm, weight: approx. 10500kg, operating hours: approx. 92000h. Including bar loader FMB turbo 8-80 XT/3200A, automatic loading and unloading system alphaMAX 6-axis, chip conveyor, coolant system, high-pressure pump and spare parts. Operation with the loading and unloading system is designed for disc diameters from 80mm to 220mm. This is a fully automated system without operator. Documentation available.  ...

Height=1.93 m, Overall length= 0.86 m, Overall width= 0.75 m, Net weight= 179 kg,

General SKU427W1534 MakeJaudt Typeø 200 mm No.240-0572-10 Year of construction2010 LocationBarneveld Main Features MaterialStainless steel Motor0.37 KW Inlet diameter200 mm Specified Features - Rotating valve MaterialStainless steel 1.4552 Rotary valvecheck Rotor with scraperscheck Rotor diameter240 Rotor width220 Number of locks:6 Lock sizes220 x20 x100x120 mm Capacity8 l every rotation Inlet200 mm Inlet flange sizes335 mm Outlet200 mm Outlet flange sizes335 mm Installation height350 mm With motor0.37 kW (1360 rpm (Ex)) Rotor speed21 rpm With adjustable packing glandscheck Air purged sealingscheck Capacity60 m3/h Information Floorspace1.2 x 0.4 m Total height0.35 m Weight150 kg CEcheckRotating valvesJaudtRotary valves > Rotating valvesBrand > Jaudt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

This MAZAK INTEGREX 200 IV S Lathe was manufactured in the year 2007. It is equipped with a Matrix control unit. The machines disposes od a spindle, a counter spindle, a milling spindle and a chip conveyor.

This 5-axis Mazak INTEGREX 200 SY was manufactured in 2001. A robust turn-mill centre featuring dual spindles and a MAZATROL FUSION 640MT control unit, it offers a spindle speed of 5000 1/MIN and movements of X-530 mm, Y-140 mm, Z-1065 mm. Consider the opportunity to buy this Mazak INTEGREX 200 SY turn-mill centre. Contact us for more information about this machine.

This HAMMERLE BM 200 - 3100 press brake was manufactured in 2000. It is a robust and reliable machine, ideal for bending applications. Consider the opportunity to buy this HAMMERLE BM 200 - 3100 press brake. Contact us for more information.

This Dugard Eagle 200 was manufactured in 2005. A robust horizontal turning machine featuring a maximum turning diameter of 280 mm and length of 508 mm. It includes a main spindle bore of ø62 mm and a bar capacity of ø52 mm. The spindle operates at speeds up to 4500 rpm, supported by a FANUC motor. Ideal for precise turning operations. Contact us for more information about this machine.

This 3-axis SCHUT DeMeet-200 was manufactured in 2018. Ideal for precise measurements, this CMM machine represents a reliable solution for quality control environments. Consider the opportunity to buy this SCHUT DeMeet-200 CMM machine. Contact us for more information about this machine.

This DEMAG Ergotech System 200-610 hydraulic injection moulding machine was manufactured in 1997. Its a robust option for efficient plastic processing tasks. Contact us for more information.

This Takisawa TC 200 was manufactured in 2005. It features a standard turning diameter of 225 mm and a maximum of 340 mm. With X-axis movement of 185 mm and Z-axis movement of 370 mm, it also includes a 12-position turret. Consider the opportunity to buy this Takisawa TC 200 horizontal turning machine. Contact us for more information.

Folding box cartoning machine Uhlmann C 100 LA • Format range folding box W 30-100, H 15-75, L 70-200 mm • Output 15-100 folding cartons/min • For offset buckle on both sides • Product feed for blister via blister stacking chute • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding box code, 1x brochure presence in folding box • Brochure folding and inserting machine from the GUK FA 21/4 Cartonac 91 magazine • Colour embossing station for folding flap opposite the insertion side, 2 lines, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • PLC Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color touch panel - Code Reader Cognex Camera Reader System - Validation documentation - Hot melt machine

C100 LB Cup Chain for Cans, Bottles/Blisters DESCRIPTION: • Format range folding box W 30-100, H 15-90, L 70-200 mm • Output 15-100 folding cartons/min • For offset buckle on both sides • Centrally adjustable cup chain • Product feed for blisters via blister stacking chute (manual packaging) • Monitoring of the height of the packaged goods in the cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding box via Lumat • Brochure folding and inserting machine from the GUK FA 21/4 Cartonac 91 magazine • Colour embossing station for folding flap opposite the insertion side, 2-line • Poor ejection with ejection counter-control • Vacuum generators • PLC Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color touch panel - Code Rea ...

This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information.

: ja miter: 1500 mm : 230 mm weight: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis FAMUP MMV 200/60 was manufactured in 2004. It features a table size of 2400 x 600 mm, with travel distances of X: 1500 mm, Y: 580 mm, and Z: 600 mm. The machine supports a table load up to 2000 kg and includes a high-speed spindle at 10,000 rpm, a 30-tool magazine, and CNC control by Heidenhain TNC 426. Contact us for more information about this machine.

Manufacturer: Index Model:G 200 RATIO LINE Year of Manufacture: 2006 Machine type: CNC Lathe Operating Hours: approximately 115,000 h TECHNICAL DATA Control: Siemens 840D (NCU 573.5, NC memory expansion to 3 MB) C-axis on main and counter spindle Thread cutting without compensation chuck Electronic shaft Additional V24 RS232 in control cabinet Transmit/Tracyl function MDE interface (machine on, machine running, piece counter) Marposs (Brankamp) collision monitoring CMS100 3D machine model for kinematic simulation in CAM programming system Control cabinet cooling unit (2 pieces) Main Spindle D65 Collet holder for pull tension HAINBUCH Counter Spindle D60 Collet holder for pull tension HAINBUCH Stop device Coolant flushing of counter spindle (shut-off valve electric) Foot switch Turret (12 stations) bottom and top Driven tools turret 1 and 2 Control function "live  ...

Manufacturer: Index Model:G 200 RATIO LINE Year of Manufacture: 2003 Machine type: CNC Lathe Operating Hours: approximately 92,000 h TECHNICAL DATA Control: Siemens 840D C-axis on main and counter spindle Thread cutting without compensation chuck Electronic shaft Additional V24 RS232 in control cabinet Transmit/Tracyl function MDE interface (machine on, machine running, piece counter) Marposs (Brankamp) collision monitoring CMS100 3D machine model for kinematic simulation in CAM programming system Control cabinet cooling unit Main Spindle D65 Collet holder for pull tension HAINBUCH Power chuck D210 with quick jaw change Manufacturer Schunk Counter Spindle D60 Collet holder for pull tension HAINBUCH Power chuck D210 with quick jaw change Manufacturer Schunk Stop device Coolant flushing of counter spindle (shut-off valve electric) Foot switch Turret (12 stations) b ...

Meat grinder Manufacturer: CFS Model: Freshgrind 200 Electric power: 52.4 kW Voltage: 400V / 50Hz Diameter: 200mm Hopper volume: 400 liters Dimensions: 2700x1650x2780mm

This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine.

INDEX C 200 Horizontal lathe GENERAL Project No.: 905493 Quantity: 1 pcs. Manufacturer: INDEX Type: C 200 Control: Fanuc 31i MA Year of Make: 2009 Condition: Used machine Spindle Approx (Hrs): 23200 Program run approx. (hours): 28742 DESCRIPTION TURNING Max. chuck diameter 160 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 32 kW Max. torque main spindle at ED 10-40/100% 190 Nm Spindle aperture main spindle 65 mm Spindle Flange Size Main Spindle A2-6 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Max. speed sub-spindle 5000 1/min Max. power sub-spindle at ED 10-40/100% 24 kW Max. torque sub-spindle at ED 10-40/100% 190 Nm Spindle Diffuser Sub-Spindle 65 mm Spindle flange size sub-spindle A2-6 Axes on the sub-spindle unit C/Z Revolver top left Number of stations/powered by 12/12 Tool h ...

This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine.

1 gebr. Ultrasonic cleaning system KKS H4-200, year 2007 Service: was carried out regularly by the manufacturer, fully operational and immediately available from stock.

This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information.

This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.