wd 200 used for sale

Key data: 750 kN, 35 mm

Engel - Injection moulding machine e - Max - 310/75 ( No.:4 ) -Electric - Year of construction: 2009 - With special accessories: Crane: 1000 kg - Screw: 35 – diameter - Actual shot value: 42,349,940 pcs. - Operating hours: 100,778 h – In automatic: 67,929 h - Control: LC-200 - Screen: 15 – inches - Clamping force: 750 KN - Mold plate size: 560 mm x 600 mm - Weight: 4,400 kg - Sales from location: Germany

Faceplate, faceplate chuck, four-jaw chuck, face turning chuck -Faceplate: Chuck size Ø 200 mm -Mount: Short cone 4 / Cone Ø 61-63 mm Short cone flange with camlock fastening -Bolt circle: Ø 82 mm -Through hole: Ø 41 mm -Dimensions: Ø 200 x 125 mm -Weight: 9.5 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-20-200-Y3A -Stroke: 200 mm -Shaft: Ø 10 mm -Dimensions: 450/85/H50 mm -Weight: 4.3 kg

Angle bracket, locksmithsquare, flat angle -Flat angle: Leg length 300 x 200 mm -Quantity: 1x flat angle available -Dimensions: 300/200/H5 mm -Weight: 0.7 kg

Display, display module, display panel, text display -Manufacturer: Siemens, Text display Simatic S7 TD 200 -Type: 6ES7272-0AA00-0YA0 6ES7 272-0AA00-0YA0 -Dimensions: 150/70/H30 mm -Weight: 0.3 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 200 mm -Piston rod: Ø 20 mm -Mounting: Bolt circle Ø 85 x 8 mm / see photos -Number: 4 cylinders available -Price: per piece -Dimensions: 440/104/H123 mm -Weight: 8.5 kg/pc.

Length stop, rip fence, saw stop, material stop, motorized length stop, controlled length stop, feed stand, support foot with angle piece -Length stop: Support foot with angle piece for various machining options -Shafts: Ø 45 mm -Displacement lengths: see photos -Dimensions: 1000/200/H560 mm -Weight: 18.7 kg

coolant capacity: 10 m3l/h Headroom: 10 m operating pressure: 2 bar voltage: 420 V / 50 Hz motor speed: 1430 U/min engine output: 0,25 kW weight: 10 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Ref. no. 22/98-118884 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tires, solid rubber tires, forklift tires -Manufacturer: Continental, solid rubber tire CSE-Robust Super Elastic SC 15 -Tire size: 200/50-10/ 6.50 SC 15 RIM 6.50 F-10 -Quantity: 24 pieces available -Price: per piece -Dimensions: Ø 450 x 200 mm -Weight: 23 kg/pc.

Oil cabinet, oil cabinet, oil pump, oil dispensing station -with counter -Extendable hose with dispensing nozzle -Compressed air connection

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Clamping angle: 200 x 200 mm -centrically exciting -Mouth size: Ø 200 mm -Weight: 30 kg

Table dimensions: 1100 (2300) x 760 mm Motor output: 7,5 kW Spindle diameter: 30 mm reus: 1500 - 10000 U/min Weight: ca. 880 kg Panhans swivel milling machine 245|200 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Stepless speed regulation 1500-10000 rpm Engine power 7.5 kW (10 hp) Net weight approx. 880kg Technical description: 7 touch control, optionally usable, top and below 7 capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display ( ...

Hydraulic power unit, hydraulic pump, hydraulic pump -double pump -Max. pressure: 60/200 bar -Liter flow rate: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg

Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 176 mm -Drum length: 430 mm -Speed: 2800 rpm -Power: 3 kW -Shaft mount: Ø 28 mm -other sizes also available in stock -Weight: 50 kg

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Vibrating bottles: 2 -Cable length: 6m each -Weight: 100 kg

Three-jaw chuck, three-jaw lathe chuck -screwable interchangeable jaws -Mouth size: Ø 200 mm -Weight: 12 kg

End mill, shank mill, milling cutter -Six-cutter -Finishing cutter -Diameter: 32 mm -Usable length: 200 mm -Type: HSSE N30 -Quantity: 9 pieces -Sale: only complete set -Weight: 12 kg

4-Spindel-Papierbohrmaschine - 4-head spindle paper drilling Josef Foellmer IRAM 200 Year ca. 1984 - Serial-No. 106 Drilling area 3 - 10 mm Drilling distance variabel 36 - 430 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Three-jaw chuck Three-jaw lathe chuck -Mouth size: Ø 200 mm -without interchangeable jaws -Weight: 16 kg

Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel -Ideal for working in trenches -Transport case -Weight: 11 kg

geared motor, electric motor -Speed: 121 rpm -Power: 0.75 kW -Design: B5 -Shaft diameter: Ø 25 mm -Brake: 24 V -Protection class: IP 65 -Weight: 30 kg

Wedge bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 200 mm -Interchangeable jaws -Cone: 69 mm -Thread: M 95 x 4.5 mm -Weight: 26 kg

Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Weight: 18 kg

Key data: 160 KW, 200 kVA

We currently offer: Number 41 Cummins generator set Type: 6CT Generator LeRoy Somer Type: LSA 46.1 M5 Power: 200 KVA / 160 KW Year of manufacture generator 1999 / engine 2004 Hz 50 RPM 1500 AVR control R448 IP 21 Hours: 8505 Metrics: L: 3.30m W: 1.25m H: 1.95m Weight: approx. 2000 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm -Weight: 19 kg

Key data: 160 KW, 200 kVA

We currently offer: Number 48 Generator set Engine Perkins 1300 Power 200 KVA / 160 KW Year of manufacture 1996 IP 22 Hz 50 AVR Control SX460 Hours: 8654 Metrics: L: 5.00m W: 1.35m H: 2.00m Weight: approx. 4 tons You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 0.75 kW -Input: 1 x 200 - 240 V - 50/60 Hz -Output: 1.8 kVA -Number: 2x converters available Price: per piece -Weight: 3 kg

end mill, end mill, milling cutter -Outer diameter: 200/H60 mm -Teeth: 12 -Quantity: 1 available Price: per piece -Weight: 9 kg

Key data: 1660 mm, 510 mm, 510 mm

Fully functional Used CNC Machining Center MAZAK VTC-200 C Year of manufacture 2001 The machine has a Fusion 640M control system and is equipped with a chip conveyor, partition for pendulum machining and much more. Location of the machine: 97070 Würzburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 51 mm -Outer: Ø 200 mm -Width: 40 mm -Number: 7x discs available -Price: per piece -Weight: 1.9 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 3x201/1x190 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 2x discs still available -Price: complete -Weight: 11 kg

pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic unit, hydraulic pump, hydraulic pump -max. pressure: 200 bar -Liter output: 6 l/min per pump -Drive: 0.55 kW 1360 rpm -hydraulic tank -Number: 4x units available -Price: per piece -Weight: 95 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Kowalit, solid rubber tire with rim -Tire size: 18x7-8 Rim 4.33R-8 -Quantity: 1 piece available -Dimensions: Ø 420 x 160 mm -Weight: 19 kg

Key data: 490 mm, 1250 , 990

Machine type: EVP-RA 200 Manufacturer: ERBA Power kW: 1.5 Total volume: 230 lt. The EVP-RA 200 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 200 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...

Key data: 500 mm, 200 mm, 77 mm

Binder 500x200 Complete System Electric 220V Magnet Clamping Plate Milling Grinding Total weight approx. 50 to 60 kg. Good used condition, full function. Includes switch and control cabinet. The connection on the control box can be connected directly to 220 volt luminous flux and can therefore also be used universally on the milling machine. The actual magnet has 110 volts. Very long power cord, about 7-8 meters. The rotary switch only works to the right. That is how it should be. Always switches every 180 degrees every function. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. Therefore, no VAT is shown on the invoice.

Key data: 415 mm, 1290 , 980

Machine type: EVK 200 Manufacturer: ERBA Heating element kW: 1.5 Total volume: 200 lt. Description: With the ERBA Granulate Dryer EVK 200, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 200 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

Used BT ANT / Stacker Trucks Overall good condition Year 2017 Battery about 70% Manufacturer: BT / Toyota Type SPE200D Type of electric stacker truck Drive type: Electric Load capacity 2,000 kg PYLON DATA Mast Type Duplex with Free Lift Lifting height 2,500 mm Overall height 1,785 mm Free stroke 1,350 mm Fork length 1,200 mm

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t, 10 tool turret tailstock, bar feeder The machine can be seen under power in our warehouse (M i m u)

Code: 0379 Brand: BRENNA + ELEPHANT - ITALY Model: GR 200 - Norme CE Manually operated jib crane with cantilever beam - CE Standard Lifting capacity 200 kg Chemical-anchored base Complete with: Electric hoist RWM Mod. W 125 T1 V1 Type F - Capacity 125 kg - Speed 8 mt/min - Motor 0,6 Kw - Rpm 1400 Pneumatic suction lifter ELEPHANT Mod. VLA6F with 6 plates suitable for handling sheet metal and other materials - Capacity 500 kg - Plate dimensions diameter 265 mm - Transverse and longitudinal plate adjustment - Compressed air operation with powerful and quiet vacuum generator - Operating pressure 6-7 bar Height of support column 3400 mm Length of crane boom 4000 mm Overall dimensions for transport mm 4000 x 1100 x 900 h + Pallet mm 2000 x 1300 x 600 h

pressure: 200 t stroke: 150 mm table surface area: 850x650 mm ram surface: 730x560 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2500x3600mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t distance between columns: 500 mm stroke: 150 mm ram surface: 320 mm table surface area: 470x400 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, square block -Square block: with through holes -Bore: Ø 78 mm -Number: 4x profile available -Price: per piece -Dimensions: 300/200/80 mm -Weight: 27.9 kg/pc.

Without plug

Key data: 120 mm

BEKUM BA 200 extrusion blow moulding machine – 500 kg/h – 8L accumulation head For sale: Bekum blow extrusion machine model BA 200, ideal for PE processing and manufacturing of large-capacity blown parts. Key features • Brand / Model: BEKUM BA 200 • Year: 1990 • Type: Accumulator extrusion blower • Accumulation head: 8 Liters • Number of heads: 1 • Number of stations: 1 • Processed material: PE • Production capacity: up to 500 kg/h • Number of extruder: 1 • Screw diameter: 120 mm • L/D Ratio: 24 • Thickness Control: Yes • Material feed included Closing unit • Opening stroke: 710 mm • Clamping force: 800 KN • Plate dimensions: o Length: 1600 mm o Width: 600 mm Robust machine renowned for its reliability, suitable for different types of extrusion blow molding production. Machine visible on site. Additional photos can be sent on re ...

pressure: 160 t distance between columns: 850 mm stroke: 400 mm ram surface: 800x700 mm : 300 mm pressure of ejector: 20 t table surface area: 800x700 mm total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: 1800x1800x4200 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.