wave used for sale

Electric motor, three-phase motor -Motor is for a Ehemann grinder -Electric motor with 2 shaft outputs -Voltage: 500 volts -Power: 4.8 kW -Speed: 2860 rpm -Shaft: Ø 30 mm -Wave length: 75/150 mm -Construction: B3 -Protection class: - -Dimensions: 540/340/H270 mm -Weight: 50 kg

WMA WMP 08 One-Handed Bumper Air-cooled single-lever butt system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - problem-free welding of all sheet metal - Galvanized sheets can be welded flawlessly by controlled current increase and current reduction - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardised rotary connections - Only one plug each for welding power line, control cable and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Easy and pleasant to use - All set parameters and process variables can be read at a glance - Changes to welding parameters only for authorized personnel - Management of configuration a ...

Control: FOBA Max.travel range: X mm Y mm Z mm Wave length: um Average power: 150Watt Max. peak pulse power: 200 kW Laser crystal:Nd:YAG machine has cooling equipment, Made in Germany

Control: Max.travel range: X mm Y mm Z mm Wave length: um Average power: Watt Max. peak pulse power: kW Laser crystal: the beam source is damaged Made in Germany

Dressing thickness planer Duco ADM 65 comb. Planing width 650 mm Planing thickness 220 mm 2 knives Tersa Wave Articulated Pressure Roller Length dressing table foldable 2300 mm 8.5 hp The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Key data: 5 A, 80 V, 400 V

- EWM tigSpeed continuous drive 45 coldwire wire feeder - Power 350 amps at 60% - Electronic RF ignition - TIG liftarc welding without HF - Adjustable AC current shape - Sine, trapezoidal & square wave current - Adjustable AC frequency 30 Hz to 300 Hz - Adjustable AC balance - 2-stroke/4-stroke operation - Reduced secondary current that can be called up via burner button - Spot welding/stitching function (spotArc / spotmatic) - Adjustable upslope and downslope time - Adjustable gas pre- and gas-afterflow time - MMA welding - MMA average pulses - Adjustable hotstart current and hotstart time - Adjustable Arcforce - Anti-stick function - Energy-saving due to high efficiency and standby function -water-cooled Specification - Welding current adjustment range: 5 A - 350 A - Duty cycle at ambient temperature: 40 °C / 25 °C - 100%: 350 A - Open circuit voltage: 80 V  ...

Fabr.No.: 64000502 // Ser.No.: 00 07 19 736 Formats: Feeder: max. 53,0 x 84 cm / min. 15 x 15 cm Cross break: max. 53,0 x 43 cm / min. 15 x 20 cm Triple break: max. 26,5 x 43 cm / min. 20 x 30 cm Pockets: 6 (+ 1x side pocket after first knife) Knives: 2 Shed delivery with press rollers MBO ASP 66-2 ME (With sheet press and marking device for automatic counting) Equipment / Additional information: Pre and after-mounted creasing & perforating wave (The creasing perforating shaft is between pockets and knife fold)

Used column dissolver. Description: - electrically raised column - inverter-wave - voltage: 380/400V - power of mixing motor: 3hp - 2,2Kw - speed: stepless regulation - dispersing disc diameter: 200mm - total height: 2200mm - shaft length with dispersing disc: 600mm - maximum lift height: 1000mm

Width 82 cm Year of construction 2015 Circular Pile Feeder RFH-82 1st station: Knife wave station SSP 82 2nd station: 6 fold pockets 82 cm Folding rollers Extra Grip Automatic folding pocket adjustment Automatic Folding Roller Adjustment Dual power device Standing arch delivery SBP 86 Completely overhauled and workshop tested Machine condition: cleaned Delivery date: immediately Price on request. We deliver and install worldwide!

Description: Input voltage data (DC) Maximum Current Voltage: 15.5V Nominal input voltage: 12V Rated voltage: 12V Minimum supply voltage: 10.5V Input Voltage Range: 10.5 - 15.5V Output voltage data (AC) Maximum output power: 1000W Continuous Output Power: 500W Output Voltage Range: 220-250V Nominal voltage: 220, 230, 240V Voltage form: pure sine wave Voltage frequency: 50.60Hz Efficiency: 92% USB Port: 5V/500mA general informations Dimensions (H x W x L): 267 x 132 x 68 mm Net weight: 1.36kg Transformer: High frequency transformer Fan​ Degree of protection (IP): IP20 Operating temperature: 0-40° Safety features Fuse: 2x40A Protections: reverse polarity protection, low voltage protection, over voltage protection, overload protection, short circuit protection, over heat protection Approx. Onsite Dimension. (l x w x h): 150 x 150 x 100 mm, weight approx.: 1 kg

Description: Continuous power: 250W Pulse power: 500W Input voltage: 12V Output voltage: 230V Waveform: Modified sine wave Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg

Description: Continuous power: 250W Pulse power: 500W Input voltage: 12V Output voltage: 230V Waveform: Modified sine wave Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg

Description: Input voltage data (DC) Maximum Current Voltage: 15.5V Nominal input voltage: 12V Rated voltage: 12V Minimum supply voltage: 10.5V Input Voltage Range: 10.5 - 15.5V Output voltage data (AC) Maximum output power: 1000W Continuous Output Power: 500W Output Voltage Range: 220-250V Nominal voltage: 220, 230, 240V Voltage form: pure sine wave Voltage frequency: 50.60Hz Efficiency: 92% USB Port: 5V/500mA general informations Dimensions (H x W x L): 267 x 132 x 68 mm Net weight: 1.36kg Transformer: High frequency transformer Fan​ Degree of protection (IP): IP20 Operating temperature: 0-40° Safety features Fuse: 2x40A Protections: reverse polarity protection, low voltage protection, over voltage protection, overload protection, short circuit protection, over heat protection Approx. Onsite Dimension. (l x w x h): 150 x 150 x 100 mm, weight approx.: 1 kg

Description: Continuous power: 250W Pulse power: 500W Input voltage: 12V Output voltage: 230V Waveform: Modified sine wave Approx. Onsite Dimension. (l x w x h): 150 x 100 x 100 mm, weight approx.: 1 kg

Description: Input voltage data (DC) Maximum Current Voltage: 15.5V Nominal input voltage: 12V Rated voltage: 12V Minimum supply voltage: 10.5V Input Voltage Range: 10.5 - 15.5V Output voltage data (AC) Maximum output power: 1000W Continuous Output Power: 500W Output Voltage Range: 220-250V Nominal voltage: 220, 230, 240V Voltage form: pure sine wave Voltage frequency: 50.60Hz Efficiency: 92% USB Port: 5V/500mA general informations Dimensions (H x W x L): 267 x 132 x 68 mm Net weight: 1.36kg Transformer: High frequency transformer Fan​ Degree of protection (IP): IP20 Operating temperature: 0-40° Safety features Fuse: 2x40A Protections: reverse polarity protection, low voltage protection, over voltage protection, overload protection, short circuit protection, over heat protection Approx. Onsite Dimension. (l x w x h): 150 x 150 x 100 mm, weight approx.: 1 kg

Used Polystar 620 DSM Continuous Welding Machine for mounting on roller conveyor or conveyor belt. Model 620 DSM = 12 mm weld width / wave embossing Continuous welding machine with right or left inlet For mounting on roller conveyor or table transport conveyor. The new price was €2,700 To be sold for 990,- € net. Special price due to warehouse clearance in 51688 Wipperfürth.

Description: Machine Specifications Axis processing movement : Stationary table with X-Y-Z movement Maximum work piece size X-Y : 1525mm x 3050mm Work table height : 900mm Axis travel X-Y : 1580mm x 3100mm Zaxis travel : 150mm Rapid traverse rate X-Y : 60m/min Rapid traverse Z : 60m/min Design : Bridge gantry style Axis drive system X1/X2-Y : Rack & pinion drive Axis drive system Z : Belt drive Positional accuracy X-Y : +/- 0.05/ 500mm Positional accuracy : +/1 0.01/ 100mm Repeatability X-Y-Z : +/- 0.03mm Cutting head : Mazak multi-control torch 2 Z axis profiler : Non-contact type/Z-axis follow type Lighting system : LED light Operation status indicator lights : Yellow/laser source on, red/laser beam on Programmable assist gas ports : 3 types (Oxygen, air and assist gas Noise level laser : Max 80dBA Machine base : Precision machined single cast iron System weight : ...

530-mm plane width and 4 knife waves quiet run through plane knife waves diameter 125 mms. stable Abrichtanschlag tiltable from 90 ° to 45 ° of highly competitive 5.5 kW of engine S1 . table length 2.9 m Max Spanabnahme, mm 8 Absaugstutzendurchmesser, mm ?160 total weight, kg 800

Of used filter cake-cerium-smaller impulse: Springs a filter cake-cerium-smaller exists of two mutually running knife waves they chop up the filter cake.

Of used filter cake-cerium-smaller a filter cake-cerium-smaller exists of 2 mutually running ones knife waves. according to medium a filter cake comminution at approx. 50-mm grain size can be reached.

The Prima Power Platino 1530HS laser was produced in 2006 by the Italian company Prima Industrie S.p.A. The 4 kW laser is equipped with a Primach 20L CNC control. The machine is used for cutting metal sheets with a thickness of 20 mm (black steel), 12 mm (stainless steel) and 8 mm (aluminum). The laser has an independent F axis with programmable focus position and nozzle distance. The maximum feeds in the X / Y / Z / F axes are respectively: 3050 mm, 1525 mm, 150 mm and 25 mm. The machine is equipped with: a Prima Power Convergent Lasers Division CX 3000 resonator with a power range from 200 to 3000 W and a cooling unit. In addition, the price of the laser also includes 3 cylinder regulators made of chrome-plated brass with a stainless steel diaphragm in the first stage of reduction and a bellows structure in the second stage of reduction, and 2 cylinder regulators for oxygen and nitroge ...

Angle gearboxes / gearboxes NOSEN type. RN-6 M-I-LR-1/1 T shape / 1 shaft input, 2 outputs of waves -Shaft diameter 25 mm -The ratio of i = 1:1 -Speed max 1500 rpm -Weight 23 kg -Max. Of torque at 1500 rpm: 96 NM

Hach DR 3800 VIS Spectrophotometer The DR 3800 is a VIS spectrophotometer with a wavelength range of 320 to 1100 nm. The device comes with a complete set of application programs and supports multiple languages. The DR 3800 spectrophotometer contains the following Programs and operating modes: Saved programs (pre-installed tests), barcode programs, user programs, favorites, single wavelength, multi-wavelength, wavelength scan and time scan. The DR 3800 spectrophotometer performs digital measurements in concentration, absorbance or % transmission. When selecting a user-generated or programmed method, a structured menu control and prompts guide the user through the test. This menu system can also generate reports, statistical evaluations of generated calibration curves and reports on instrument diagnostic checks Display mode: transmission (%), absorbance, and concentration Light ...

Laser cutting machine BYSTRONIC BYSPRINT FIBER 3015 built in 2014. The machine is equipped with ByLoader for loading sheet metal. Technical specifications : - laser type: FiberLaser - power: 3 kW - activation time: 38752 h - cutting time: 19591 h - automation: ByLoader 3015 - automatic sheet loading - adjustment range: 300-3000 W - wavelength: 1060-1080 nm - nominal size of sheet X, Y, Z: 3000 x 1500 x 70 mm - maximum workpiece weight: 750 kg - table change time: approx. 35 s. - positioning deviation: + - 0.1 mm - positioning spread: + - 0.05 mm - edge detection accuracy, capacitive detection: + - 0.50 mm - accuracy of edge detection with CutControl: + - 0.15 mm - accuracy of optical edge detection using Detection Eye: + - 0.15 mm - maximum parallel positioning speed X, Y, Z axes: 100 mm / min. - maximum simultaneous positioning speed of the X, Y, Z axes: 140 mm / min ...

LXSHOW LXW 2000 W FIBER laser cleaner manufactured by Chinese manufacturer LXSHOW Jinan Lingxiu Laser Equipment Co., Ltd. in 2022, is a widely used industrial device designed to remove e.g. rust, paint, oil and oxide layers from the surface of workpieces. The use of the laser cleaner guarantees the removal of contaminants without any damage to the surface and achieves exceptional cleanliness, impossible to achieve with conventional workpiece cleaning. Laser cleaning is performed without the use of chemicals or cleaning solutions, making the fiber laser cleaner environmentally friendly. At the end of the process, the waste takes the form of a solid powder, easy to store and recycle. The LXSHOW fiber laser offered together with the reliable 2 kW RAYCUS RFL-C2000 generator ensures long-lasting, uninterrupted and highly efficient performance at a low cost of operation. The LXSHOW LXW20 ...

Ultra-Turrax Year built: 1983 Diameter: 220 mm Power: 13.5 kW 380/660 Volt 1460 rpm Wavelength: 1100 mm good condition LWH: 1700 x 400 x 350 mm

GeneralTurning-milling centre; Control: Fanuc 31iB5 CharacteristicsSwing- Ø, max.1070 mmDrive power milling spindle22 kWDrive power second spindle22 kWDrive power main spindle22 kWNumber of Toolmagazine positions50 Speed max.8000 rpmSlewability of B-Axis1 degreeMovements X / Z / Y1040/+-330/3150 mmMilling spindle upper side1 Input precision of C-axis on Counterspindle0,0001 degreeBar diametre164 mmSpindle speed 2nd Spindle max.1500 rpmInput precision of C-axis on Mainspindle0,0001 degreeBar diametre164 mmSpeed max.1500 rpmMax. Turning Length3076 mmMax machining diameter1070 mmWeight approx.46000 KgTool spindle full indexing specificationsErhöhung der mögl. Indexierung der B-Achse auf 0,0001º Einrichtung zur Positionierung der B-Achse mit einem minimalen Winkel von 0,0001º anstelle der Standardausführung mit 1º, einschließlich der Option Direktes Wegmesssystem in der B-Achse derSp ...

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

Travel: 0 x 0 x 0 mm [ X x Y x Z ] Metal 3D Printer Laser Type / Power: Yb Fiber Laser / 250 W Wavelength: 1070 nm Lens: F-Theta Precision Lens Volume of construction: 100 mm x 100 mm Reservoir volume: 200 mm x 200 mm Coater: Rotation-guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 - 100 microns Scan: jog 20 m/s, operation 6 m/s Spot size: min. 40 microns Chamber opening: 450 x 180 mm

Codimag viva 340 waterless offset 8 colors Electrical equipment and control panel. Longitudinal cutting device with 4 knives. Plate bending device for waterless plates Base with register trolley with flexographic printing unit for varnishing including varnish pump and anilox roller (angle 60°, grid width 80L/cm, volume 9 cm³/m²) Magnetic cylinder for Flexowerk Stork screen printing units each with base and register carriage including ink pump and automatic ink level control UV drying 8 statons Make IST, type M40-8x1-MBS-G-Co-CMK-SLC4 printing units à 120 Watt 4 printing units each 160 Wat (printing unit, varnishing unit, 2xscreen printing) Air-cooled spotlight unit including CMK reflector, telescopic slide and SLC stepless power control Hot foil stamping unit with servo drive incl. -1Hot foil stamper -Foil saving circuit -Special base with register trolley -electronic e ...

There are two identical lasers LASAG AG OS SLAB, pulse duration: 0.1-0.5ms, wavelength: 1064nm, max. laser radiation: 1mW, year of construction laser 1/ 2: 2002/ 2003.

Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new.

Wavelength: 1064nm, max. pulse power: 200kW, max. pulse repetition frequency: 60kHz, connected load: 2kW, with documentation, on-site inspection is possible.

Shielding box for electromagnetic compatibility, length: 728mm, width: 520mm, height: 520mm, with full absorber lining (ferrite absorber), 10x feed-through filters (banana sockets), BNC feed-through, cold device feed-through (filtered), Sub-D feed-through (filtered), waveguide feed-through for optical cables, double EMC seal, antenna feed-through (conduit feed-through), shielding attenuation and two gas pressure springs.

From warehouse dissolution, as good as new with bearing traces. 1 x Bosch SF-A4.0125.030-10.071 Brushless servo motor Type: SF-A4.0125.030-10.071 12.5Nm 9.1A 3000 rpm Wavelength: 5cm Shaft diameter: 2,4cm The machine is electrically tested before sale and receives a DIN VDE 0113 test report.

The PRIMA POWER PLATINO 1530 laser was produced in 2012 by the Italian company Prima Power. Technical parameters: – machine time worked: 24800 hours – power: 2500.0 W – CNC control: Primach 20L – X travel: 3000.0 mm – Y travel: 1500.0 mm – working area: 3000 x 1500 mm – maximum sheet length: 3000.0 mm – maximum sheet width: 1500.0 mm – maximum sheet thickness: 15.0 mm – maximum load on the table: 250.0 kg – machine length x width x height: 12000.0 mm × 6000.0 mm × 3000.0 mm – machine weight: 12000.0 kg Rofin Sinar DC 025 CO2 laser specification – type: CO₂ – laser: Rofin Sinar DC 025 – power: 2,500 Watt – power stability: + -2% FS – wavelength: 10.6 µm – gas type: He 67.7%; CO2 4.1%; N2 28.2% – beam propagation factor M2: 250 microseconds, 70 used resolutions – positioning accuracy: + -150 radians – operating condi ...

Gear motor Lenze Flange gear motor, shaft diameter 25 mm Wavelength 50 mm 1.5 kW Reduction 20.04 Output speed 172.1 In good condition, ready for use Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 2000 mm turning diameter in the gap: 710 mm turning speeds: 36 - 1600 U/min centre height: 250 mm spindle bore: 103 mm tailstock quill taper MT: 5 MK tailstock travel: 150 mm tailstock quill diameter: 75 mm total power requirement: 7,5 kW weight of the machine ca.: 3,15 t dimensions of the machine ca.: 3,65 x 1,0 x 1,3 m Highlights - Large 103mm spindle bore - High cutting performance, optimum cutting results - Electromechanical spindle brake - Sophisticated gear design for transmitting the engine power in high Torques and strong cutting forces - Tuned, stiff construction for the absorption of large cutting forces - Tailstock construction with large radius for the machining of long waves - Feed operation via one-hand lever technology with rapid traverse function Delivery: 3-jaw chuck 315 m ...

Manufacturer: Scansonic Type: AL01 Condition: refurbished, since then unused and professionally stored in the manufacturer's suitcase Wavelengths: 900 ... 1030 nm; 1064 nm, 1080 nm to 4 kW Illustrations: 2.0:1 - 2.5:1 - 3.2:1 - 4.0:1 - 5.3:1 Fiber plug: Trumpf B or Type D (LLK Auto) Laser: CW laser up to 4 kW Working range height (Z): ± 5 mm Robot adaptation: any Repaired/replaced: - Lens - Compression spring - Protective spring - Cover - Beam aperture - Shaft spring - Fiber coupling firing In addition, the device was cleaned, adjusted and force-normalized.

Ref.-No. 10009-20-1276 Table Laser Designation of the attachment marking laser SAL 22 Manufacturer SH-Made in Germany Model SAL22 Year of construction NEW Compact ALL-in-One table machine for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 1 • Wavelength 1064nm • Marking field size 110x110 mm • Marking software EZCAD in German / English • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • max. component height approx. 300 mm • marking height approx. 110 mm • Working range approx. 390x240mm • Welded construction made of sheet steel • Connection 230V • Air-cooled • Notebook with cable, Windows 10 (German or English) • Dimensions: 670x 430x 700 mm (LxWxH) • Weight: approx. 55 Kg

Ref.-No. 10010-21-1339 Portable Laser Name of the system Compact ALL-in-one system component for laser processing Portable Marking Laser Manufacturer SH-Germany Model SAL 23 Year of construction NEW Compact ALL-in-one system component for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 4 • Wavelength 1064nm • Marking field size 110x110mm • Marking software EZCAD • Electrically adjustable Z-axis (working plane adjustment) • Welded construction made of sheet steel • Connection 230V • Air-cooled • Touch IPC with Windows 10 operating system • Keyboard • Dimensions: 1150 x 500x 1500mm (DxWxH) • Weight: approx. 85 Kg • Weight of the portable laser unit 6.8 Kg • Smoke extraction included

Ref.-No. 10013-21-1337 Marking laser SAL 27 Name of the attachment marking laser SAL 27 Manufacturer S-Germany Model SAL 27 Year of construction of new goods The SAL 27 in a flexible allroud talent. Thanks to the three different, manually adjustable axes, inscriptions from small to very large parts up to a height of over one meter can be easily realized. With the swivel axis, the laser head can be positioned in the most difficult places. The SAL 27 is mobile and can be easily rolled onto the workpiece. Product • Fiber laser 30W (optional 50W) • Laser class 4 • Wavelength 1064nm • Marking field size standard 110 x 110mm (optional 150 x 150mm) • Y-axis from 1020 - 1320mm, travel max. component height 1120mm X-axis approx. 250mm travel • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • manually adjustable Z-axis • Touch PC with la ...

Ref.-No. 10014 / No. 21-1560 SAL 28 Description Marking Laser SAL 28 Manufacturer SH-Germany Model SAL 28 Year of construction NEW Dear Sir or Madam, We hereby offer you, in accordance with our technical specification, on the basis of the generally applicable Terms of delivery and payment (VDW 502), hereinafter to: Product • Fiber laser 20W (optional: 30W, 50W) • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm • Marking software EZCAD in German / English • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • max. component height approx. 300mm • Electrically adjustable Z-axis • Laptop incl. holder with operating system Windows 10 • Aluminium profile frame • Air-cooled • Door width approx. 520mm / door height: 400mm • Connection 230V • Dimensions: approx. 800 x 600 x1660 mm (LxWxH) • We ...

Motor with 2 flexible shafts make BIAX type MBPMash. -No: 8/1113/39Engine speed: 900/2200 /: 4600/9000 rpm.Drive power: 0.55 kWWith- 2 flexible waves- Underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

WIWOX MC 110 II ultrasonic cleaning machine, built in Germany in 2004, cleans metal parts from unwanted deposits using ultrasonic waves. The use of such technology allows for fully professional cleaning of workpieces, as well as preventing surface damage and saving time and costs. The ultrasonic cleaning machine allows for cleaning workpieces weighing up to 110 kg, even in the most inaccessible places. The cleaning process takes place in a working chamber with dimensions (L x W x H) of 516 x 360 x 435 mm, where the placed workpiece is cleaned by ultrasonic waves at a temperature of 80°C for approximately 5-15 minutes. The total weight of the device is 280 kg. Specification of WIWOX MC 110 II ultrasonic cleaning machine - dimensions of the working chamber (L x W x H): 516 x 360 x 435 mm - maximum weight of workpiece: 110 kg - ultrasonic power: 1.2 kW - connection power: 6.2 kW  ...

Perkin Elmer Lambda 365 UV-VIS Spectrophotometer, Dual-beam device Wavelength range 190-100 nm variable bandwidth 0.5-20 nm 10 mm cuvette holder

PRIMA POWER PLATINO 1530 laser was manufactured in 2001 in Italy. The machine is designed for cutting metal sheets made of structural steel, stainless steel and aluminium. The processed sheet may be up to 15 mm thick (structural steel), 8 mm thick (stainless steel) or 5 mm thick (aluminium). The feed rates in the X/Y/Z axes are 3000 mm (X axis), 1500 mm (Y axis) and 140 mm (Z axis) respectively. The laser cutting machine is equipped with a high performance ROFIN SINAR SLAB DC025 resonator with a power of 2500W, created for fast and precise cutting in metal sheets and guaranteeing the highest quality of cut elements. The installed PRIMACH 20L CNC control allows memorising many different work programmes and controlling every aspect of machining. The machine is offered with a wide range of equipment, including: CAD/CAM software SiCam v14 (license for one workstation) and post-processo ...

BYSTRONIC Byspeed 3015 laser cutting machine was built in Switzerland in 2004. The machine equipped with an extremely reliable BYSTRONIC Bylaser 4400 laser source with a power of 4.4 kW, performs the cutting and engraving process on workpieces with a maximum thickness of 25 mm (structural steel), 20 mm (stainless steel), 12 mm (aluminium) and 3 mm (brass, copper, titanium). Workpiece machining is performed on a large work table with a length of 3000 and a width of 1500 mm, allowing free access to the laser’s work area and for loading larger-size sheets weighing up to 890 kg. The control panel with BYSTRONIC ByVision CNC controller for programming the machining parameters has been placed on the arm to increase the machine operator’s comfort. Characteristics of the BYSTRONIC Byspeed 3015 laser cutting machine - maximum laser power: 4.4 kW - wavelength: 10.6 μm - laser beam di ...

ConceptLaser M1 cusing Year of construction: 2015 Laser: Yb (ytterbium) - fiber laser Power Laser: 400W Wavelength: 1070nm Laser beam diameter: 50-200μm Production speed: 2cm³/h to 10cm³/h (depending on material) Layer thickness LaserCUSING:® 20μm - 80μm Inert gas consumption: approx. 1m³/h Dimension construction chamber: 250x250x280mm Height: 280mm (minus the building plate thickness) Field of exposure: 245x245mm Scope of machines - Laser sintering system M1 cusing 400W - Filter system TBH (FP 15 EX II 3D) - Rofin fiber laser unit Machine weight: 1,7to (without accessories) Machine mileage:41612h Laser running power:19191h