water well used for sale

Oil-water separation system, condensate separator, oil and water separator, oil separator -Oil-water separation system: oil and water separator -Dimensions container: Ø 500 x 755 mm -Dimensions: Ø 585 x 1145 mm -Weight: 31kg

The refrigeration system was used by us for 1 year in the rental. The chiller has 2 refrigeration circuits and fan control. the cooling capacity is 240kW at 7/12°C and 35°C ambient temperature. the refrigerant used is R140a

Sprühdüsen Ejektordüsen Nebeldüsen Wasch-Reinigungsdüsen Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Manufacturer: Forst-Enor, switching pump RSWV40 -Motor: AEG -Power: 4 kW -Speed: 1420 rpm -Delivery rate: 40 l/min -Dimensions: 2000/455/H500 mm -Weight: 156 kg

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: drukomat, oil-water separator -Type: drukomat 1 -Dimensions: 430/330/H680 mm -Weight: 27kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Wauquier, coolant pump type 5/69300 305 P -Power: 0.15 kW/2800 rpm -Delivery rate: l/min -Immersion depth: 205 mm -Dimensions: 200/230/H400 mm -Weight: 12.6 kg

Hydraulic pump, oil pump, gear pump -Manufacturer: Garbe Lahmeyer, pump from radial drilling machine Kolb NKR 55 -Type: AV15 / 15 P -Power: 0.6 kW / 1390 rpm -Dimensions: 420/280/180 mm -Weight: 24 kg

The ENR series are air-cooled chillers for industrial use for outdoor installation. The ENR 038 has axial fans, scroll compressors, condensers with finned aluminum fins and self-cleaning coaxial evaporator for maximum operational safety. Internal pump, tank, fan control. Cooling capacity 37 Kw

Water flow rate 30-150l/h Flow meter with manual control valve Solenoid valve for water and compressed air. Pressure regulators for water and air Special nozzle for injecting water and air Mounted on a plate

Used RO station by EPURO type RO 2000 PL. New 2017. Technical data: Medium - water, Nominal capacity Q [m3/h] - 2.0, SDI -

Immediately available in recon order used

Available in recon order used

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: 380 volts -Power: 0.75 kW -Dimensions: 400/200/H430 mm -Weight: 40 kg

Legionella Water Tester -With documents in English -Dimensions: 480/380/H180 mm -Weight: 3.2 kg

Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump -Connection: volts -Power kW - Delivery rate: 100 l / min -Dimensions: O 250 / H330 mm -Weight: 20 kg

Recon Part Number: 2128176 Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun -mobile version: -Connection: 1/2 inch -Cooling unit output: 0.33 kW -Water volume flow: 500 l / h -Dimensions: 895/600 / H1020 mm -Weight: 156 kg

Recon Part Number: 0347 0202 / 0170-36-14.20 Length: 313mm Attention: We also have various other RECON parts from different manufacturers / types available. We would be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part Number: 241743 226956 Series B/C Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Emulsion splitting plant, oil-water separation system -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg

Recon Part number: 559 200 05 01 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Water softener, water softener tank -Bank: approx. 200 liters -Incl. Regeneration salt for water softeners -Dimensions: 640/640/H880 mm -Weight: 172 kg

Recon Part number: 30.4012-500/10 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Waterfall shower, massage shower -Stainless steel sink -Pipe: Ø 89 mm -With eye shower -Dimensions: 680/H1020 mm -Weight: 17 kg

TO HOM IT MAY CONCERN; WE VE 2 SETS OILY WATER SEPARATORS RWO SKIT / S - DEB 1.0 AT OUR STOCK. SEPARTORS SKIT ARE NEW AND UNUSED . EX STOCK . IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, pump -Manufacturer: Siemens - Schuckert, cooling water pump type W28/270 -Power: 0.2 kW / 2840 rpm -Immersion depth: 265 mm -Dimensions: 320/190/H480 mm -Weight: 12.8 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water reservoir -Pump: Manufacturer Elpu Type N 120 -Power: 0.085 kW -Speed: 2800 rpm -Dimensions: 570/540/H370 mm -Weight: 24 kg

Immediately available in recon order used

WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...

Grundfos Water Pump CRN10-02 with Control Pump from 2022, as good as new, complete with control system, 1 available. 0.75 KW, 10 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN10-02 A-FGJ-G-E-HQQE Serial number: 0001 Type: Water Pump with Control Power [kW]: 0.75 Flow rate [m3/h]: 10 Pressure max [bar]: 25 Pumping height [m] 15 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40

Oil-water separation system, condensate separator, oil and water separator, oil separator, separator, oil/water separator, oil/water separator -Manufacturer: Domnick Hunter, oil-water separator -Type: SE2015 -Dimensions: 800/480/H1085 mm -Weight: 82kg

Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit -Compressor: Danfoss type: MTZ22JC4A -Pump: Lowara type CEA70/5 0.55 kW -Total dimensions: 740/710/H930 mm -Weight: 196 kg

Grundfos Water Pump CRN3-23 Pump from 2022, as good as new, complete 2 available. 2.2 KW, 3 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN3-23 A-P-G-E-HQQE Serial Number: 0003 / 0004 Type: Water Pump with Control Power [kW]: 2.2 Flow rate [m3/h]: 3 Pressure max [bar]: 25 Pumping height [m] 113 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40

chiller, chiller Emicon RAS 601 S KP, , 60 Kw cooling capacity , 17.7 Kw. Electrical Power, Amp 51 YOC 2018 Refrigerant R290 Weight 1.062 kg.

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Unfortunately the type is no longer readable -Container content: approx. 25 liters -Total dimensions: 420/360/H3500 mm -Weight: 13 kg

KSB Water Pump Movitec VF 10/11 -L B Pump from 2022, as good as new, complete 2 available. 4 KW, 10 m3/h, 89 m Manufacturer: KSB Model: Movitec VF 10/11-L B Serial Number: 1750863-1 Type: Water Pump Power [kW]: 4 Flow rate [m3/h]: 10 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 70

Chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank, system is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator and a buffer as well as an internal P3 pump. low GWP refrigerant R454B, winter package, RS485,

V22 - used approx. 30 m³ / 30,000 litre V4A stainless steel tank, horizontal tank on pedestals. technical details: capacity: approx. 30 m³ / 30,000 litres material: stainless steel, probably V4A, we can have this tested upon request dimensions: approx. L total 6.50 m / L tank 6.00 m × Ø 2.50 m / H total 3.00 m Used stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank on 2 fixed, welded stainless steel bases, lid on the top of the tank (68 cm) and on the side, several inlets and outlets. On the flanges it reads V4A 1.4571, see picture. This stainless steel tank can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, manure, potato steam trays, leachate, rapeseed oil or as a rainwater collection tank, etc.. Pictures from the inside to follow. Unfortunately there is no type label. Price upo ...

Chiller made by Linde Self-made for low temperatures, goes down to minus -25 °C, with two refrigeration circuits. With two Bitzer 6G-30.2Y compressors as main compressor and two 2N-7.2Y compressors as subcoolers. Bundle tube heat exchangers, condensers, etc. Compressors have been renewed.

STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...

Glycol cooler, water cooler, water evaporator, Küba SGB 132, 70 liter capacity, two fans 710mm diameter, 920 red/min. 2.2 Kw. From a Fruit Warehouse, CA Warehouse In very good condition and fully functional. Fan very robust, south electric, 2.2Kw.

Recon Part Number: 0400 6472 12 cylinders Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle

KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3

Recon Part Number: 555 200 08 01 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump, switching pump -Cooling water pump: with cooling water tank -Pump: Motor Schlüter 1.5 kW -Container capacity: liters -Dimensions total: 850/620/H670 mm -Weight: 124 kg

1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important control data: ...

New repair kit for a Volvo Penta TMD 122A cooling water pump List price of the package 650,-€ consisting of the following parts: 1 Piece Repair Kit 8767628 1 piece gasket 862596 1 piece gasket 422171 1 piece gasket 423351 3 pcs hexagon screw 955542 10 pcs hexagon screw 955536 1 piece plug 968146 2 pieces of V-belts 966959