water ring used for sale

Cake ring made of aluminium à ̃ x H: 200 x 60 mm NEW ( 10 pieces )Dimensions: à ̃ x H: 200 x 60 mmMaterial thickness: 2.0 mmDetails see picture

Cake ring made of aluminium à ̃ x H: 260 x 60 mm NEW( 10 pieces )Dimensions: à ̃ x H: 260 x 60 mmMaterial thickness: 2.0 mmDetails see picture

Cake ring made of aluminium à ̃ x H: 300 x 60 mm NEW( 10 pieces )Dimensions: à ̃ x H: 300 x 60 mmMaterial thickness: 2.0 mm

Slip ring, rotary joint, rotary transmitter, slip ring rotor, rotary head slip ring, column slip ring, slip ring transmitter -comes from: HUSS Rides, manufacturer of leisure facilities -Slip ring: 10 x copper rings -Interior opening: Ø 600 mm -Outer diameter: Ø 720 mm -Installation height: 410 mm -Number: 2x slip rings available -Price: per piece

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: flange ring -Inside: Ø 257 mm -Flange: bolt circle Ø 285 x 6 mm -Number: 34x flange ring available -Price: per piece / minimum order 2 pieces -Dimensions: Ø 307 x 4 mm -Weight: 0.7 kg/piece

Light barrier, ring light barrier, frame light barrier, inductive ring sensor -Manufacturer: di soric, ring light barrier, frame light barrier -Type: ORSD 20 P2K-IBS -Detection: metallic and non-metallic parts -Voltage: 10...35 V DC -Number: 10 sensors available -Price: per piece -Dimensions: 97/60/H20 mm -Weight: 0.1 kg/pc.

Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm

Offer 26001 Technical data: - Horizontal + vertical working position - 3 mot. Driven rollers - hydr. Left lower roller regulation - Hydraulic cylinder pressure capacity 4 t - Shaft diameter 35 mm - Shaft rotation 11 rpm - Roller diameter 132 - 142 mm - Drive 400 V 1.1 kW - Bending capacity approx. - Round tube Ø 800 60 x 1.5 mm - Flat steel Ø 400 90 x 15 mm - Square steel Ø 400 30 mm - With: - Separate control panel with digital display - E – Footswitch in sep. Control panel for right / left run - Standard bending kit for flat and angle material - 6 tube roller sets 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx. 450 kg - Space requirement approx. W 700 x H 1150 x D 950 mm

Electric profile roller - Choice of horizontal or vertical work - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm/1\" - Instruction manual - Footswitch left/right and EMERGENCY STOP Round material solid 30 / 900 mm Square material solid 30 / 900 mm Angle steel 35X35X5 / 600 mm T - Steel - Bridge Outwards 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Roll diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirement approx. 0.75 x 0.6 x 1.4 m Condition: never used / new (5) Auction-ID: A7-46642-50

Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Flat steel 50 x 10 mm Angle steel mm Axle diameter 30 mm Working speed 6.0 rpm Roller diameter - tools 132 mm Total power requirement 0.75 kW Machine weight approx. 0.25 kg Dimensions approx. 0.6 x 0.8 x 1.3 m Auction-ID: A7-46642-106

Dimensions 6 to 41 mm / approx 370 spanners, 150 ring spanners and 110 spanners / total 630 pieces / assorted in and including 8 plastic stacking crates ( 600x400mm) Auction-ID: A1-46698-369

Profile bending machine with: - Foot pedal right/counterclockwise rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven Round material solid 35 mm Square material solid 35 mm Gross diameter max. 70 x 2 mm Rectangle 60 x 60 x 3 mm Flat steel 60 x 10 mm Axle diameter 50 mm Working speed 4.3 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Dimensions approx. 0.9 x 0.95 x 1.4 m Condition: never used / new (5) Auction-ID: A7-46642-133

Metric fine / UN thread, trapezoid / stacked in 4 pallet boxes / pallet boxes include mounting Auction-ID: A1-46698-156

4x Scanner (RS507) 8x Battery 1x charging station (SAC5070) Bluetooth connectivity → complete freedom of movement 1D + 2D barcode imager (SE4500 technology) → very fast capture Rugged design, IP54, shockproof up to 1.8 m Ergonomic 2-finger trigger, ambidextrous 8 slots for RS507/RS507X batteries Fast charging function for lithium-ion batteries Supports Standard (970 mAh) and Extended (1940 mAh) batteries Compatible with: Symbol RS507 Zebra RS507X RS50EA Battery Series Auction-ID: A1-46686-1011

Profile bending machine with: - Foot pedal right/counterclockwise rotation - 1 set of standard rollers - All 2 rollers are driven - Working horizontally or vertically Round material solid 35 (800) mm Square material solid 35 (1200) mm Angle steel 50 x 50 x5 (850) mm Flat steel 60 x 10 (800) mm Axle diameter 50 mm Working speed 4.5 m/min Roller diameter - tools 155 mm Total power requirement 1.5 kW Machine weight approx. 0.9 kg Space requirement approx. 0.6 x 0.9 x 1.35 m Auction-ID: A7-46642-58

Litec 501 – Professional Cable Reel & Cable Ring Dispenser (up to 380 kg) Sell a robust Litec 501 cable dispenser. Universally applicable for cable rings, cable wires, empty conduits and all cable drum sizes – even damaged drums can be unwound without any problems. Technical data: Load capacity: up to 380 kg Diameter: approx. 50 cm Edge height: 77 mm Weight: 7 kg dynamic, automatic roll-off brake Made in Germany, maintenance-free, extremely stable Auction-ID: A1-46686-61

Pre-assembly of the clamping rings on the pipe Allows the fitting to be installed outside the installation situation Reduces assembly errors, repeat installation possible 6M0 --> 3 pieces 8M0 10M0 12M0 14M0 15M0 22M0 400 Series 810 Series Quantities as in the photo. Auction-ID: A1-46686-5

Various sizes / approx. 25 pieces / including 12 various fork wrenches Auction-ID: A1-46698-372

Scan engine: Ultra-Slim Area Imager Barcode types: 1D, 2D, PDF417, QR, DataMatrix etc. Range (Focus): Standard Range Movement tolerance: very high Drop Specification: Drops on Concrete, Impacts on Metal Weight: extremely light (finger module + BT module) Connectivity: Bluetooth HID / SPP Compatibility: PC, smartphones, Honeywell terminals Auction-ID: A1-46686-1010

Ring compressor RB40-610, 50 Hz, 1.1 kW/60 Hz, 1.3 kW, 190/180 mbar, 2.4/3 m³/min., S/N G13563264, plus plastic box with various tinsmith tools

including approximately: 144 ring beams dimension: 145 x 65 x L1770 mm, 14 poles, dimension: 195 x 200 x L2500 mm, 10 pallet with poles, length: 2200 mm. Total dimensions: L330x W250 x H345 cm Auction-ID: A1-46623-94

Technical details Type: Pelleting press / pellet press Manufacturer: PCM Year: 2014 Engine power: 45 kW Motor type: 7XM 280S6 B3 Production capacity: Approx. 400–600 kg/h Configuration: - Ring press pellet production system - Automatic control panel - Feeding hopper - Vibrating table Condition: - New ring installed - New rollers installed Application: Pellet production for biomass and industrial processing operations Auction-ID: A7-40554-5

including dimensions: 140 x 140 x L2200 mm, ring beams length: 2770 and 1780 mm, total dimensions: L278 x W 230 x H184 cm Auction-ID: A1-46623-91

Ringer Master (compatible with Doka Framax) accessories, consisting of: 21 pieces Ringer Master Scaffolding Bracket 120, without posts, galvanized Factory number: 708V11 SO000583 Auction-ID: A1-46973-414

Ringer Master (compatible with Doka Framax) accessories, consisting of: 25 pieces Ringer Master Scaffolding Bracket 120, without posts, raw, ungalvanized Factory number: 708V11 SO000582 Auction-ID: A1-46973-413

200 pieces Ringer Master Uni Clamps, galvanized, List number of manufacturers: 704V71 Compatible with Doka Framax SO000576 Auction-ID: A1-46973-411

32 pieces of railing posts for the Ringer Master scaffolding bracket 120, galvanized, Factory number 408V12 Ringer Master formwork is compatible with Doka Framax SO000587 Auction-ID: A1-46973-418

21 pieces Ringer Master scaffolding brackets 120, galvanized, without railing posts Factory number 704V11 Compatible with Doka Framax Item price SO000584 The offer is WITHOUT any depicted transport or storage containers, barels, lattice boxes, etc. Auction-ID: A1-46973-415

Ringer Master (compatible with Doka Framax) accessories, consisting of: 9 pieces Ringer Master Scaffolding Bracket 120, without posts, galvanized Factory number: 708V11 SO000585 Auction-ID: A1-46973-416

250 pieces Ringer RS tension clamps, galvanized Manufacturer part number: 704V5 Compatible with Doka Framax SO000572 Auction-ID: A1-46973-407

25 pieces of railing posts for the Ringer Master scaffolding bracket 120, ungalvanized, raw, Factory number 408V12 Ringer Master formwork is compatible with Doka Framax SO000586 Auction-ID: A1-46973-417

Doka Framax / Ringer Master accessories for panel formwork, consisting of: 200 x Framax quick release RU, galvanized Ringer Master compatible Doka Framax Item number 588153400 SO000574 Auction-ID: A1-46973-409

Doka Framax / Ringer Master accessories for panel formwork, consisting of: 87 x Framax quick release RU, galvanized Ringer Master compatible Doka Framax Item number 588153400 SO000575 Auction-ID: A1-46973-410

This concerns an unused product, consisting of, article number: WPFXD1113, Combination ratchet spanner with joint 11 x 13mm MI X-pert, quantity: 179 Auction-ID: A1-45624-129

Incl. Phillips screws for combination mandrels, milling mandrel rings, dowel fittings, etc., also from Regofix and others. Auction-ID: A7-47109-61

2 pieces bulk material container white, wooden lid and tension ring 113cm high 67cm diameter Auction-ID: A1-47205-2837

ring stone saw for masonry blocks; 3200W; in a suitcase; defective;#201818110017 Dimensions: 800x600x200mm Auction-ID: A7-47086-139

Ring-Spanner Set 26pcs. with soft grip Sizes: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30 and 32 mm. Chrome Vanadium In handy roll-up/hanging case. Auction-ID: A1-47084-345

Water cooler tower,1 MW- 1,040 kW, 2pc, make BALTIMORE, each with 2 fan units, see photo.

Pure water unit ENVIROFALK Performance in continuous operation 15 sqm / h max 18 sqm / h CA 2 trailers full of material Year 2009 / was for 1 year in use then the production has been discontinued. complete with all documents and control New price 260.000,-€

Cooling unit, cooling water recirculating cooler, water cooler, chiller O. HellwigYear of construction: approx. 1995Cooling capacity approx. 6 kWNight cooling unit 3 kWaverse refrigerant R422DWasser tank capacity approx. 35 litresFlow volume circulation pump 40 litres/minPump capacity 0.63 kWWasser connections 1/2 inchMains connection 380 volts, 50 Hz- temperature setting via rotary potentioSpace requirement L x W x H 1100 x 750 x 140 mmWeight 285 kg; used

Cooling Unit Cooling Water Recirculating Cooler ARO Type VWK 31/1-SFabr. No. 0705384 year of construction 2007Cooling capacity 3500 wattsAmbient temperature max. 32CRefrigerant R407CCrefrigerant Capacity 0.98 kgOperating overpressure Refrigeration compressor max. 29.5 barWater tank capacity approx. 8 litresFlow volume Circulating pump 27 litres/min. (1620 litres/h)Water connections Quick-release coupling Rectus Type 26Mains connection 230 volts, 50 Hz, 2.2 kW- temperature setting via DANFOSS thermostat controller- built-in circulation pump (250

150,000 litres of V2A horizontal hard water/soft water tank Properties: Volume 150000 L Material V2A (AISI 304) 1.4301 Total height 4200 mm Inner diameter 3600 mm Overall length 13500 mm Cylinder length 12000 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Description: Tank 1/2 - hard water tank Tank 2/2 - Soft water tank Tank crest: Ventilation nozzle Filling nozzle 2 CIP balls In front: Cone base Manhole 450 x 350 mm oval Residual drain with flanges with disc valve Thermometry Tank body: Reinforcement rings Behind: Cone base

Special water-to-water heat pump from Bartl Apparatebau with tolerant coaxial heat exchanger for well water Type WB 4 CF/W with 13 kW heating capacity also suitable for brine operation very solid technology, very differentiated control options via external software Trouble-free operation since 2010 will be available in June, when the change is organized The private sale takes place under exclusion of any warranty and guarantee. If you have any questions or are interested, please feel free to contact us. Only to self-collectors!

1500l FPA water tanks are equipped with the following as standard: - Inlet opening with a diameter of 32.5 cm, closed with a steel cover with a rubber gasket - Baffles to prevent water from splashing during transport - Runoff stump - FPA tanks: they are made of steel and galvanized according to EN 1461. Auction-ID: A7-46433-6010

FPA water tanks are equipped as standard with: - Inlet opening with a diameter of 32.5 cm, closed with a steel cover with a rubber gasket - Baffles to prevent water from splashing during transport - Runoff stump - FPA tanks: they are made of steel and galvanized according to EN 1461. Auction-ID: A7-46433-6005

1500l FPA water tanks are equipped with the following as standard: - Inlet opening with a diameter of 32.5 cm, closed with a steel cover with a rubber gasket - Baffles to prevent water from splashing during transport - Runoff stump - FPA tanks: they are made of steel and galvanized according to EN 1461. Auction-ID: A7-46433-6009

1500l FPA water tanks are equipped with the following as standard: - Inlet opening with a diameter of 32.5 cm, closed with a steel cover with a rubber gasket - Baffles to prevent water from splashing during transport - Runoff stump - FPA tanks: they are made of steel and galvanized according to EN 1461. Auction-ID: A7-46433-6006

Specifications Brand: IMT Type: CNC Waterjet Cutting Machine Control: CNC control with control console Construction: portal model Cutting technique: water jet Work table available Including: Control panel Monitor/display High-pressure hoses Cutting head Guide rails energy chains Visible features Large flat cutting table High portal for X/Y movement Electronic CNC control Industrial version Put away working. KMT WATERJET SYSTEMS SLV 50 CLSC 1750X1200X1300MM PRESSURE VESSEL WITH FEED TRAY RADLER 2452 YEAR 20081200X1200X2700MM WATER BOWL BAUER EXPO 1200 YEAR OF CONSTRUCTION 2008 1100X1750X1800MM MOTHERCASE 1200X400X1300MM STORAGE CABINET 1000X550X800MM Auction-ID: A1-41998-15

1500l FPA water tanks are equipped with the following as standard: - Inlet opening with a diameter of 32.5 cm, closed with a steel cover with a rubber gasket - Baffles to prevent water from splashing during transport - Runoff stump - FPA tanks: they are made of steel and galvanized according to EN 1461. Auction-ID: A7-46433-6008