water plant used for sale

according to pdf attached

pdf description attached

Extrusion recycling machine EREMA 1514T for processing of CLEAN unprinted polyethylene and polypropylene, WITHOUT DEGASSING, no converting of printed materials. capacity up to approx. 1.100 kg/hr. The machine is refurbiushed in ecellent condition. Auch Folien + Technik e. Kfm. D-73723 Esslingen phone +0049 1577 5329827

silo, bulk material silo, gravel silo, sand silo, storage silo, aggregate silo used Manufacturer: unknown Volume approx. 1500 - 1600 m3 27 individual chambers each approx. 2.2 x 2.2 m (one of them staircase) Silo Material: Steel Square Total dimensions: approx. 20 x 9 x 15 m We have various silos in different sizes made of a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

Washing screw stainless steel, sieve basket wash screw used, Manufacturer: unknown Diameter approx. 550 mm, Drive 1.1 kW Total dimensions approx. 6.5 x 1.3 x 1.7 m. The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

machine measurements: 9.657 x 1.472 x 1.985 mm machine weight: -- kg power capacity: -- kW Condition: used - as good as new Specification: FFP 2 N95 mask system complete Consisting of: - see sketches in the plant - cycle time approx.: 35 - 50 pieces/min - not CE certified - Space requirement approx.: 9,657 x 1,472 x 1,985 mm - Completely assembled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Run-off belt Dimensions: Height: 216cm Width: 71cm Depth: 120cm

Butter press machine  made of stainless steel with discharge funnel on rolls Height: 200cm Width: 150cm Depth: 88cm

Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

Kemper Long Knitter Type: Princes Year of construction 2007 Stainless steel version for long work of the breads with 2 attachments Band width: 32cm comfortable with bread systems on rolls Height: 155cm Width: 200cm Depth: 60cm

Bread long-knitter for bakery Manufacturer Unknown Height: 180cm Width: 210cm Depth: 130cm

Filler block, Fabr. Nagema, Type: Varifill 40/10K/10PP Capacity: 12,000 Fl/h, run on 0.33 lt longneck and 0.5 lt NRW bottles 40 filling valves 10-digit crown cork 10-digit screw capper (for MCA 28 closures), double pre-evacuation, Running direction: left -> right YOC 1994 L: 4,000 mm, W: 2,700 mm, H: 2,800 mm Price on request

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

Kemper bucket elevator for bread plant Type: BE 11 Possible applications in all dough processing lines transport also of soft doughs Space-saving design optionally 1 or 2 pieces of dough Transverse belt left-hand / Cross-band right-hand with scales

Grease baking device Habersang Stainless steel analog control up to 110°C with outlet valve incl. accessories Net price plus VAT ex warehouse

with 14 shapes with 14 Forms

Very well preserved, almost new KÄLIN grinding/planing machine. Year of manufacture 2009/2010 Type Caster IPC 6.000. Only in use for a very short time. Very well preserved, almost new machine with all engines and accessories for the production of up to max. 6 to/h of sanding wood. System complete with Siemens S 7 control, grinding equipment and grinder type Grinder SL 800 and all planer heads, along with a set of spare cutter heads. Extraction system and complete conveyor technology for chip transport. Machine professionally dismantled, ready for takeover immediately. Warehouse location in southern Germany. Viewing is possible at any time. /

The electricity and gas-powered plant enables surface treatment of plastic films by flames. Field of application: Z.B. reverse films in the solar industry
 COMPONENTS • PSA Reversible Unwinding and Reversible Winder 2200/12 PSA W/ARW 2200/12 – Fyling Splice • Hill/ Jungwirth burner unit for gas/air mixture • Suction • Erhardt+ Leimer web edge control • OCS camera system for error detection • Semket labelling system for marking defects • GWK temperature control units for roller cooling SKL SP HC300 330KW

Bottling line KP 2010 Automatic bottling line for bottles. Filling up to 2 liters 6-head filling Speed + 3000 bottles / hour depending on bottle size and product Material stainless steel Lightweight construction, wheels underneath, easy to move Conveyor slatband type, length 4 meters Gutter under the conveyor Electricity 380 v. Compressed air: 6 bar

Dossys Tetra Pak Dosys System for Fruit Dosing before filling in Yoghurt Cups

Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location

Quality Used Power Plant with two (2) Solar Centaur 40, 3.0 MW, (Each), 13,800v 60 Hz. Enclosed. Equipment Description Complete power plant with 2 turbine generator systems. Everything included The equipment has very little hours since installation. They will need to be moved off the site. They are located in The USA. They were overhauled in 2020 installed and never used. The following is included: Control Panels, New Square D Switchgear, 15kv, 1200 amp. for synchronizing the generators to each other and the grid. Grid protection hardware and software. Inlet system with filter cleaning system New control system Exhaust system complete New Oil coolers Gearboxes have been overhauled Generator ends have less than 800 hours on them, one is new 0.0 hours A control room enclosure complete with all control switches New battery chargers Ready to be dismantled

Our company currently offers the R-1000 stationary concrete block machine. The SUMAB R-1000 is one of the most technologically advanced machines on the market! A giant among all block machines! Real money maker! Using a SUMAB R-1000, you can produce the following products: • Empty blocks • Curb stones • Paving stone • Tiled stone Technical details: • CAPACITY - 1000 m2 pavers per shift. • BLOCKS 20X20X40 18000 pieces/8 h Scandinavian quality and good prices! Contact us for pricing and technical specs! We will provide you with the best solution for your business projects!

Various Kreyenborg / Nordson double piston screen changers - Continuous screen changer - 1x backwash filter - Immediately available, on request also with control, hydraulic unit. Please let us know your desired capacity and the material so that we can offer you the right filter.

Saccharification plant (1), consisting of: VA cooker KLÖCKNER HANSEL, year of construction 1992, 2 mixing tanks, 1 belt dryer STELA approx. 1,500x300x500 cm, 3 gas burner ECLIPSE, with extraction system, 1 VA conveyor belt for material feeder, 1 screening system BRABENDE, year of construction 1995, 1 mixer approx. 200x50x50 cm

see pdf attached

COMPLETE GRANULATION LINE Products: glass, clay, fertilizers; Working system; Productivity: 15,000 tons/year in 2 work shifts with 2 workers per shift; CE marked; Main components: • D1 - Raw material loading hopper for storage of raw material loaded by wheel loader – 15 ton/h; • P1 - Disruptor/Crusher - Crushes any aggregates of various sizes present in the raw material arriving from D1 – 15 tons/h; • R1 - R24 Granulator Mixer - mixes and granulates the raw material from P1 and discharges the wet product into the hopper – 8 ton/h; Main components: • B1B Fluid bed dryer - Dries wet granules from R1 - 8 ton/h; • T5 - Vibrated tubular duct with loading ports - Transport of dried granules and fine powder respectively from B1B the dust discharge rotocell from the PD4 filter to the P5 vibrating screen; • P5-Vibrating Screen - Selects the dried ...

Used Masa Stone Making Line Year of Make: 2001 Consisting of: - Mixing plant - Colormix - Kübelbahn - Stone paver - approx. 3600 production boards 1400x1100mm - Aerial ladder with 22 shelves - Transfer table - Countersunk ladder - Packager - Brettpuff The drying chamber is not for sale Second-hand Masa block-making plant Year of manufacture: 2001 Consisting of: - Mixing plant - Colormix - Bucket conveyor - Block-making machine - Approximately 3,600 production boards, 1,400 x 1,100 mm - Elevator with 22 levels - Sliding platform / Finger car - Descending conveyor / Lowerator - Packager - Board buffer The drying chamber is not for sale

-Manufacturer: TESSA -Capacity: 1500 Btls/h -Filling Machines - Two Pcs -Labeling device ( Self- adhesive labels) -Shrink tunnel -Set of conveyers -PET Bottles blowing machine -Mold for blowing PET bottles 1 l -Mold for blowing PET bottles 0.5 l

Stone Production Plant Year of Make: 1989 Board pavers from the manufacturer OMAG Simatic S 5 control system with visualization by Frima Board size 1,400 x 1,000 mm Cross cleaning Quick Forming Clamping Pneumatic Drawing plate equipment Circulation Hydraulic pawl feed with proportional valveson wet side Dumping device Lifting ladder with chain transport, 18 shelves and double pusher and collector Vehicle Group Countersunk ladder with 18 levels double joint Hydraulic Stone Remover Hydraulic Stone Doppler Chain conveyor at sorting station and pawl feed at dry side conveyor Film applicator Horizontal strapping Granule spreader Electric Packager Board cleaning brush in V-belt conveyor Board turner Board stacking device for stacking board package transport incl. board buffer; Pre board destacker buffer for 75 boards Board destacking device Board insertion wi ...

TECHNICAL SPECIFICATIONS Manufacturer: ECOKRAFT Description: Pelletizing plant with two pellet pressing lines including bagging and packaging in small containers Type: Stationary Type: LP22 Year of manufacture: 2023 / Commissioning: 2024 Hours: 448 Essentially consisting of: - Hacker HA1100 for shredding coarser raw material - Discharge belt with overbelt magnet - Conveyor belt with permanent magnetic roller - Granulator SMC 500/700 - Extraction via pipe and hose lines - SMU60 filter system - 2 x MB3LX material bunkers - Dosing systems - 2 x LP22 pellet mills - 2 x conveyor belts for screening plants - 2 x FT screening plants - Bagging machine AS900 Detailed technical description on request.

Fully automated vacuum chamber machine, suitable for vacuum packing of goods in solid and liquid form. Machine incl. sep. vacuum pump RIETSCHLE, various format parts.

Qty. 1 Second-hand aluminium foundry – still on foundation Mfc.: Gautschi, ZAM Kęty, Konwent, Remix, Foseco (Poland), Santas Built: 2000 – 2008 Still on foundation Entry material: Aluminium scrap Final product: 9”, 228 mm Billets diameter Scope of supply: Grid-frequency induction furnace PIT1500 manufactured by ZAM Kęty with a capacity of 1.5 tons plus a transformer Medium-frequency induction furnace PIT 2500 manufactured by ZAM Kęty with a capacity of 2.5 tons plus a transformer Kowent MB-M-(5-60) B sweep dust collector Holding furnace manufactured by Remix BSG-10/15 with a capacity of 15 tons Foseco FDU MARK 10 refining unit Horizontal Continuous Casting Machine manufactured by GAUTSCHI, Log length 7.0 m Log Homogenising Furnace manufactured by SANTAS Makina, Model ALLOGENIZER-2500-GS

Gable top Filling Machine with Capper Made by ELOPAK for Sale Item #: Usm-166 Category Gable Top Machines Gable top Filling Machine with Capper For Sale (ELOPAK) Type: Cold Filling for Fresh Milk/Juices Year of manufacturing 2005 Machine Brand: Elopak Made in Japan Machine Condition: Excellent Spare parts: Large qty spare parts available with machine

Used concrete block, pavers production plant Brand: ERMAK Country of Origin: Türkiye Model: 8 X 8 QUATRO Year: 2021 Scope of Supply • Main press (single-layer machine, servo-driven) • Pallet dimensions: 1,400 x 1,150 x 50 mm • Cycle time: 15 seconds • Finger car • Buffer rack • Elevator – de-stacker unit (dry and wet towers) • Dry-side pallet conveyor • Stone centering robot • Product collection robot • Omega product discharge conveyor • ZENO horizontal and vertical PET strapping machines • Integrated shot-blasting machine and feeder (servo-driven) • Transverse conveyor • Pallet storage system (conveyor and robot) • Machine infeed conveyor Additional Equipment • ColorMix • Double washing machine Excluded from the Scope of Supply • Pallets (production boards) • Curing chamber racks • Moulds • Batching plant (mixers ...

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

Bottle Filler and crown capper, make Krones, type: Mecafill VK2V 024-188/KK, 24 filling valves, Vacuum pump, Hot water injection before closing, 6 head bottle cap closing, Crown Cork feeder, electr. height adjustment, direction: counter clockwise / right to left, with Siemens S7 Simatic ET200M, built 1998

Bottle filler, make. KHS, type: VVF-90-KK16-SV16, with 90 filling valves, with 16-head crown cork and 16-head screw capper, built 1989

Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.

On offer is a combined heat and power plant from the manufacturer Energiewerkstatt Hannover, model ASV 20/43. The complete engine was completely replaced about 1.5 years ago for approx. € 20,000.00 and is therefore to be considered as new. Technical data: Manufacturer: Energiewerkstatt Hannover Model: ASV 20/45 Gas Type: Natural Gas The plant is currently located at our customer's site near Hanover and is being sold due to restructuring. A viewing is recommended. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are understood as net prices in EURO ex works. It is also the buyer's responsibility to carry out any professional dismantling and loading of the assets. Since these are used assets, we sell them without guarante ...

Bottle filler, make Krones, type: VKS 84 / SV 12-094 RM, for lemonade and mineral water 24.000 bph, with 84 filling valves (mechanical with float control), with 12-head screw capper make Zalkin, for MCA 28 aluminum caps, right machine, built 1992

Vacuum filler, make SEN, with 28 filling valves, with 5-head screw capper for MCA 28 caps.

Chlordioxyd elektrytical plant for bewerage industry.

Vacuum filler, make SEN, type: Compacta FWF 30/6, for about 5.000 bph, with 30 filling valves and 6-head nature corker, adjust to 0,7 lt / 0,75 lt "Bocksbeutel"- and 1,0 lt wine bottle, built 1985

Bottle filler, make Pirzer, type: Nova, long pipe filler with 20 filling valves, with crown capper, built 1981

UV disinfection system mounted on stainless steel frame with pumping station, storage tank and control cabinet.

The chamber in which the product carrier is inserted is available over 2 flaps which are pneumatically controlled. The spray nozzles are tiltable. It is a nozzle with 63 spray nozzles installed.