129,243 used machines on RESALE, but how to find them? Machine Search
used wagon furnace system with 2 x wagon furnace Heuft Vulkan Thermo-Roll VTR 10.19,0.09 and 1 x boiler Heuft HK 200, Fabr.-Nr. 13 C 582, with 3 trolleys 60 x 100 cm per oven, 9 shelves per trolley/oven, shelves each 18.5 cm high, with br. Weishaupt oil burner, external dimensions per oven: 170 cm wide, 325 cm deep, 260 cm high, outer dimensions kettle: 105 cm wide, 170 cm deep, 200 cm high, in baker's condition, ran perfectly until the end
GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps
The plant has 2 application units for solvent-based coating or lamination. 4 drying tunnels web width max. 1060 mm, Speed max. 180 m/min, Diameter Ab rewinder = 1000 mm, Accessories : Microperforation, Pretreatment
Fat Baker Riehle Wendomat 48 Riehle Model: Wendomat 48 Immersion basket for max. 48 pieces Dispensing Device Manual 1 stainless steel proofing trolley with tilting frame Temperature controller with safety thermostat Steam lid, drainer tray Output approx.: 480 pcs/h Stainless steel version, mobile Connection 400V, 16A-CEE plug Occasion
used
Key data: 90 mm
A first-class renovated extrusion recycling product EREMA Series Type 1109 TVEplus for processing polyethylene (PE), polypropylene (PP) and polystyrene (PS), with screen changer, degassing for processing printed films. Capacity up to 450 kg/h, available at short notice. Electrics: 50 hearts. Note: The brand-new machine of the latest design costs more than 3 times the available machine. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +49 1577 5329827
The system was used to paint glass bottles. It has two spray booths and a dryer with liquid gas. Temperature 170/180 degrees C. Size: 3.80 meters wide, about 11 meters long. Works perfectly. Has been constantly maintained. Many spare parts with him.
A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible.
Two identical Hyfra refrigeration units are available. Cooling capacity: 25kW, refrigerant: R410A, refrigerant charge: 4kg, max. operating pressure: 42bar, medium: water, pumps process/standard: 2/2, pump type: CM3-4/CM5-5. Machine dimensions X/Y/Z: approx. 1650mm/750mm/1600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible.
Key data: 130 mm
Installed capacity 498 kW, single degassing with vacuum pump, screw Optimized for film processing used for PE/PP. DC Drive Throughput with PE approx. 500-700 kg at approx. 150 kw. Throughput for PP approx. 450-550 kg at approx. 160 kw. Composed of: Foil silo with agitator and discharge screw approx. 5 m³ Regrind/granules, dosing screw, masterbatch, dosing screw, tamping unit. Extruder 130L/D 35 Hot Knock Off Granulator (Water Ring Granulator) Centrifuge Classifying sieve Removal with pressure blower Screw and barrel were renewed in 10/2020, (repair costs 45.000EUR) Groove bushing at the inlet renewed in 2015 is currently still at 60%. A new groove bushing is included as a spare part and is included in the retail price. (NP.ca. €5,000) The number of hours spent on the extruder from repair to dismantling of the system is 851 hours. Cooling system Industri ...
Materials: PP // Film Width (Max): 1600 mm
Used PET bottle filling line. The line includes the following machines: 1. WeightPack Filler: WHT 12/36/28/8-141 NHESL, year 2009 This machine is designed for filling milk into PET bottles. The inlet system includes: - a feeding system with a screw, - a bottle disinfection system with peroxide (H2O2), - a bottle rinsing system with water, - a filling section with scales, - a cap application section with prior disinfection. Technical data: Nominal speed: 167 bottles/min. Machine weight: 9200 kg Electrical cabinet weight: 400 kg Operating temperature: 0 – 40 degrees C Relative humidity: 80% Ambient lighting: 200-250 lux Power supply voltage: 400 V Frequency: 50 Hz Power: 20 kW Nominal current: 62 A Compressed air pressure: 7 bar Air consumption: 1200 nl/min Maximum product pressure: 1 bar Maximum product feed rate: 200 l/min 2. Labeling machine – Sacmi: ...
The machine is in excellent condition. It can reach 9 bags per minute with milk from 3Litres to 25 Litres
A boiler system with underfeed firing is available. Heating capacity: approx. 2300kW. An on-site inspection is possible.
A boiler plant is available. Thermal output: 2000kW, water content: 5820l, heating surface: 250m², max. operating overpressure: 4bar, water quality: TRD 612, max. permissible flow temperature: 110°C. An on-site inspection is possible.
Semi-automatic fat fryer with remote control from the manufacturer Habersang Temperature: max.180 °C Connected loads: 380 V, 50 Hz, 3 Ph On-site fuse: 3 x 16 A Max. product quantity (donut): 60 pcs. Machine dimensions (LxWxH): approx. 117 x 93 x 100 cm Tub dimensions inside (LxWxH): 1048 x 648 x 128 mm Tipper outside dimensions (LxWxH): 807 x 635 x 61 mm Trolleys with tipper: available Availability: as of now Condition: fully functional
Semi-automatic fat baker with remote control from the manufacturer Habersang Temperature: max.180 °C Connected loads: 380 V, 50 Hz, 3 Ph On-site fuse: 3 x 16 A Max. product quantity (donut): 60 pcs. Machine dimensions (LxWxH): approx. 117 x 93 x 100 cm Tub dimensions inside (LxWxH): 1048 x 648 x 128 mm Tipper outside dimensions (LxWxH): 807 x 635 x 61 mm Trolleys with tipper: available Availability: as of now Condition: fully functional
Semi-automatic fat baking device from the manufacturer Habersang Temperature: max.180 °C Connected loads: 380 V, 50 Hz, 3 Ph On-site fuse: 3 x 16 A Max. product quantity (donut): 60 pcs. Machine dimensions (LxWxH): approx. 117 x 93 x 100 cm Tub dimensions inside (LxWxH): 1048 x 648 x 128 mm Tipperoutside dimensions (LxWxH): 807 x 635 x 61 mm Trolleys with tipper: available Availability: as of now Condition: fully functional
Fat Baking Appliance Riehle Fettboy Digital for fatty pastries e.g. doughnuts, doughnuts, quark balls Stainless steel version, with moving table TOP grease baker with 2 dipping grids, Drip tray and steam lid Simple technology only DGUV V3 tested by us Connection 400V,16A- CEE plug Approx. dimensions: 1250 x 750 x 250 mm, WxDxH Used device cleaned and tested with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Maintenance contract Service Package Delivery Instruction & Commissioning
Fat Baking Appliance Riehle Fettboy for fatty pastries e.g. doughnuts, doughnuts, quark balls Stainless steel TOP grease baker with 2 dipping grids, Drip tray and steam lid Simple technology only DGUV V3 tested by us Connection 400V,16A- CEE plug Approx. dimensions: 1250 x 750 x 250 mm, WxDxH Used device cleaned and tested with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Maintenance contract Service Package Delivery Instruction & Commissioning
SOREMA HIGH CAPACITY WASH LINE INCLUDING INTENSIVE HOT WASH, HOT RINSE, SINK FLOAT SEPARATION AND FINAL RINSE, APPROX. OVERALL FOOTPRINT: 40' WIDE X 90' LONG, ELECTRICAL CABINET - HOT WASH SYSTEM INCLUDES: (2) MODEL SHW-8000 WASHING SILOS, EACH SILO WITH CONTAINS (2) STR-16/20 INTENSIVE FRICTION WASHING REACTORS, FEED SCREWS, EXTRACTION SCREWS, & EXTRACTION PUMPS, (1) MODEL WCE-2000 WASHING CENTRIFUGE, PROCESS WATER RECYCLING TANK AND PUMPS, 72" DIA. MODEL VBC-1800 VIBRATING SCREEN, FEED SCREW, MODEL WCE-230 MULTI-STAGE WASHING CENTRIFUGE, (2) MODEL SCW-280 CONVEYING SCREWS - HOT RINSE SYSTEM INCLUDES (3) MODEL STR-16/20 STIRRERS WITH SEPARATION CYCLONES, MODEL WCE-1500 WASHING CENTRIFUGE, 72" DIA. MODEL VBC-1800, VIBRATING SCREEN, RECIRCULATING TANK, MODEL SCW-280 CONVEYING SCREW SINK FLOAT SEPARATION SYSTEM INCLUDES A STIRRER, MODEL VSP-20/55 SEPARATION TANK, 72" DIA. VB ...
Fat baking system Reimelt EL6-1000 with filling station - Manufacturer: Reimelt - Model: EL6-1000 - Material: Stainless steel - 6 rows - Analog control - Hourly output: approx. 1000 pcs/h depending on the product - Automatic turning station - With filling station Dimensions: Length approx. 490cm Widest point approx. 130cm Highest point approx. 170cm Further pictures and information are available on request.
SOREMA MODEL SA-1500 ASPIRATOR (ELUTRIATION) SYSTEM; APPROX. 58" WIDE X 17' HIGH, CYCLONE, AIRLOCK (NEW 2016)
Machine for filling, inserting dropper inserts and sealing vials and bottles with screw caps (stable, stackable) Maximum output 80 objects/min 6 filling stations with 6 rotary vane pumps for filling range 20-100 ml, other filling ranges possible by purchasing new pumps 1 new replacement pump for filling range 20-100 ml Anti-drip protection through suction back Bottle feed through infeed turntable Bottle discharge through discharge turntable Press-in station for dropper insert diam. 12.2 x 19 mm with sorting pot Screw-on station with pre-screwing and post-screwing for screw cap diam. 20.5 x 32 mm with sorting pot Vacuum pump Available bottle formats (all information without guarantee, no guarantee of completeness): - diam. 24.2 x 63.3 mm (10 ml) - diam. 29 x 74.2 mm (20 ml) - diam. 32.2 x 83.8 mm (30 ml) - diam. 35.4 x 71.7 mm - diam. 37 x 91 m ...
TBA 19 200 SQ in excellent condition only 11000 Hrs
used
GENERAL DESCRIPTION: The Macchi 3-Layers E18 is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands. It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP. The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers •Engine: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control ...
10842025 Isobaric Filling Block Framax Modulblock RFCI for Glass Bottles The Framax Isobaric Modulblock RFCI 16/16/1 DPS/C Filler Block is suitable for bottling a wide range of carbonated products, including beer, kombucha, carbonated water, soft drinks, other sparkling beverages and still drinks. This filler block has been filling beer in 300ml and 500ml glass bottles with crown cap. Filling capacity is 2000 – 3000 depending on product, operation parameters are easily set up from HMI touch screen and controlled with Siemens PLC. Machine has been maintained regularly according to manufacture’s instructions and is in vey good condition. The bottling machine consists of: • A 16 clamp rotating rinser, featuring a single hot water sanitation cycle, • A 16 valve isobaric counterpressure filler with double air pre-evacuation using CO₂, • A single head crowner (crowning u ...
Can Filling Line 1500 cph with CASK mACS filler and ELF labeller Complete can filling line from the can shaker to rotating buffer table all delivered by Canadian CASK in year 2022 suitable for beer, kombucha, cider, tee and other drinks. Can shaker is semiautomatic and requires forklift for lifting can pallet after very layer of cans. Once the layer is on the shaker, cans will flow down with gravity to ricer and finally to inlet screw of CASK mACS can filling station. This CASK mACS Micro Canning System features a three-head filling station. Its inline fill-head control technology integrates fill-level sensors with proprietary foam-control valves, enabling precise and independent control of each fill head. The system includes CO₂ pre-purge using a piston-style purge mechanism that fully evacuates oxygen from the can prior to filling, helping ensure product quality and improved ...
used
VACUREMA type 120 T-VS for the processing of rPET, technically qualified overhauled, Built in 2004, capacity up to 650 kg/h, with approval according to the standards of the F.D.A. (USA) and ESFA (EU) for direct contact of food of manufactured rPET products. Electrics European standard. Delivery Time: Short Term. Also Folien + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +49 1577 5329827
Recycling system with regranulation line, conveyor belt, roller infeed, granulate dosing unit, twin-screw stuffing unit and bagging station, 1) Regranulation line, components: Piovan feeding, backflush filter, extraction system, process-water tank, hot-die-face granulation, granulate dewatering screen, water pump station, granulate scale, granulate centrifugal dryer, granulate conveying system, filling station, swivel side wall for PCU hood. Throughput capacity MDPE, LDPE: 650-725kg/h, PCU drive: 132kW, weight: 12,680kg, extraction system air capacity: max. 3000m³/h, weight: 174kg, process-water tank filling volume: approx. 860l, backflush filter screen diameter: 215mm, number of screen packs: 4, hot-die-face granulation number of knives: 4, knife head speed: 1420/min, granulate dewatering screen dimensions: 1900x700mm, oversize separation: less than 20mm, trough volume: 470l, granulate ...
Originates from a European pharmaceutical leader in contract development and manufacturing (CDMO). Ready for Sale in Shropshire, England. Comes with: - Groninger DTE-600 rotary table - sorter with tray loader for glass bottles - Groninger ZSB-600 bottle sorter for PE bottles - Groninger DE-100 mobile bottle elevator - Groninger AAVK 300 automatic rotary bottle sterilising - cleaning unit - Monoblock filler and capper KFVG 201 with 3-head filling station This Groninger filling line was only occasionally used for short runs – therefore it is in outstanding condition with low hours. The line is primarily a used monoblock bottle filler and capper. Working Description Maximum output up to 60 BPM (depending on the container size and capping solution) with dose size up to 260 ml. The line is suitable for: • Fill ...
used fat baking appliance Habersang Primus 5/E automatic, checked and tested, internal dimensions 185 cm wide, 79 cm deep, for approx. 96 pastries, control Siemens S590U, Ser. no. 84710/001150, 9 kW, 380 V, 50 Hz
Werner & Pfleiderer Bread Plant composed of: 030.06913 Dough divider/weigher type V500 Year of construction 2013 1 or 2 chamber machine (depending on weight) Weight ranges: approx. 300 - 2,600 g/piece (1 chamber) approx. 150 - 1,200 g/piece (2 chambers) Output up to 3,200 pieces per hour (2 rows) with TOUCH control with digital hour counter with lubrication with extended hopper for approx. 200kg dough 030.06914 Conical round knitter type CCR 59 2002 Year of construction 2016 Weight range approx. 400 – 1,600gr Teflon coated Output approx. 3,600 pcs/h, with lubrication and blower, with heating Input 12 o'clock Issue 6 o'clock via slide Effective length approx. 6m - Tested and cleaned immediately available
Properties Total height 4900 mm Depth 4000 mm Width 5200 mm Manufacturer GEA/ Tds Ahaus Type 1500 Machinery No. 36001027.15.1 Year of construction 2003 Description CIP Appendix No.6 Tank volume and dimensions: CIP Tank 1 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 2 Volume: 5,500 litres Length: 1,400 mm Width: 1,050 mm Height: 3,800 mm CIP Tank 3 Volume: 1,000 litres Length: 1,100 mm Width: 900 mm Height: 1,000 mm CIP Tank 4 Volume: 1,900 litres Length: 1,100 mm Width: 900 mm Height: 1,950 mm
Used AVE - Technologies UNIBLOCCO MLK EFS/ESL 12/12/1 filling machine. New: 2006. AVE-Technologies EFS electronic filling systems are based on high-precision technology, guaranteeing high accuracy and high efficiency at all stages of operation. EFS filling machines are suitable for non-carbonated products such as water, fruit juices and nectars, milk, spirits, oils and food sauces in plastic and glass bottles. The set includes a labelling machine and a cap lift.
For any more information please get in contact with us This line originates from a prominent pharmaceutical production site in Europe. Working Description Fully integrated and built by C.E. King UK to work as one unit with Stainless Steel pharma grade construction throughout, this filling line was only occasionally used for short runs – therefore it is in excellent overall condition with low hours, well looked after and serviced on regular basis. It includes King KT-320/4 Technofill automatic liquid gear pump liquid filler renowned for its mechanical precision built, pharma grade dose accuracy and product fill cleanliness. Additionally equipped with a high-end pressure sensitive Harland Sirius labeller at the end of the line, as an extra – and included in the offer free of charge. Technical Information Maximum output for t ...
Filler Krones 60 valves KK +SV plastic Available End 26 uwemetzlerdingslebener
A complete carton sealing and conveyor line (packing line) is available. 1) Carton sealing machine Soco T-10, year of manufacture: 2012, sealing capacity: 30 cartons/min, working height range: 620mm-720mm, adhesive tape overlap: 70mm, max. adhesive tape roll diameter: 385mm, min. carton dimensions X/Y: 90mm/80mm, max. carton dimensions X/Y: 515mm/520mm, machine weight: approx. 200kg. 2) Bottom flap folder Soco F-100-5, year of manufacture: 2012, carton width range: 190mm-240mm, max. carton length: 620mm, machine dimensions X/Y: approx. 460mm/895mm. 3) Conveyor technology consisting of roller conveyors and plastic rollers, roller diameter: 48mm, roller conveyor length: 2500mm, roller conveyor width: 300mm, center distance: 60mm. 4) Weighing system Rhewa 82 basic, max. weighing capacity: 150kg. 5) Lift table Ecoline U-shape, platform dimensions X/Y: 1450mm/1140mm, max. load capacity: 1000k ...
Inv. Num. : 8867 Type: - Producer: Surfin Generated: Parameters: Inner width: 1250 mm Inner depth: 1250 mm Interior height: 2100 mm Equipment: 3x filter cartridge
Semi-automatic ceramic press for the production of round green bodies (= unfired mouldings) made of clay and other extruded masses, e.g. caps, vases, pots, tubes, tubes, etc. Part diameters from 90 mm to 350 mm are possible, max. part height: 350 mm. Output: Up to 300 cycles per hour. The system consists of: feeding device, cutter, press, lubrication device, discharge device, control cabinet with control panel and hydraulic power unit. Connected load of the entire system: 15.8 kW.
This state-of-the-art can filling line from Krones was manufactured in 2022 and is designed for the filling of carbonated and non-carbonated beverages. It processes various can formats – including standard, slim and sleek cans – with an impressive output of up to 60,000 cans per hour at 250 ml. The line was serviced exclusively by Krones and has been equipped with original spare and wear parts. With only 4,000 operating hours, it is in excellent, almost mint condition and is immediately available. The scope of supply includes a depalletizer, an empty can inspection, a Modulfill VODM-C filling machine, a Ferrum seamer, a pasteurizer, a modern packaging line including shrink packers (for 6-packs or trays with 12 or 24 cans), as well as various transport, drying and inspection modules. The line is supplemented by a complete CIP system, buffer tanks, a Contiflow processing unit, as ...
Stock# U2473-1 Used system for inline mixing powder with liquid. System consist of: - conical stainless steel AISI 321 feeding hopper with total volume about 4000 l, and working volume about 3800 l. Tank has top side wall feeding inlet with dimensions L 700 mm x H 350 mm, equipped with stainless steel lid closed on clamps. Tank has on conical side wall mounted vibrating device. Includes working platform with stairs. - inline liquid-powder mixer. Powder inlet connection 3". Mixing chamber has internal diameter 180 mm. Rotor is driven directly by el. motor 6.8 kW, 1455 rpm, 400/690 V, 50 Hz, in Ex design (Ex-IIC Exe IIC T3G6). Mounted on mobile stainless steel frame. - Stainless steel bag type dust filter by WAM in Ex design - Connection stainless steel pipes and valves.
The Corosys CCS DN50 is a carbonation and process plant used in beverage manufacturing plants. It injects CO₂ into fruit juices, lemonade and other carbonated beverages in a controlled manner and ensures the desired degree of carbonation. In addition, CIP (cleaning), steam and cooling connections enable integrated hygienic production and sterilization processes, allowing the production line to operate both efficiently and hygienically.
An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible.
Two mobile industrial air cleaners Trotec that have only been used once are available. Air volume flow: 5700m³/h, negative pressure: 1150Pa, air volume for filter class H: 3000m³/h, min. filter area with H13: 26m², opening diameter: 380mm. Machine dimensions X/Y/Z: approx. 1300mm/800mm/1050mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.
The Automatic Liquid Filling and Capping Machine by YQ MACHINERY CO LIMITED offers an inline solution for efficient packaging. Designed for easy operation and reliability, this machine is perfect for businesses in the material handling and packing industries, ensuring accurate filling and capping of liquid products. Where It’s Used: Beverage industry (bottled water, soda) Pharmaceuticals (medicine bottles) CBD/hemp oil bottling Cosmetics (shampoo, lotion bottles) Vape e-liquid production
Key data: 65 mm
Qty. 1 Second-hand 3-Layer Co-Extruder Line Brand & Model: MACCHI 3-layer co-extruder Built: 2012 Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC Die Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide E&L Components blander Shini Gravimetric weight control system Piovan/Doteco Dosing units Doteco Automatic Thickness control Kundig/K-Design Profile gauge control system Calibrating basket Corona-treat ...
maximum number of results exceeded
please refine your search
