water jet cutting used for sale

Side Tables, Light Barriers, Programmable, Standard Accessories

Inv. Num. : 9090 Type: Trumatic L3030 Producer: Trumpf Created: 2001 Parameters: Maximum power: 3 kW Switch-on hours: 49953 h Laser ON: 48307 Beam ON: 20858 s Work table length: 3000 mm Work table width: 1500 mm Source: TLF 3000 Turbo

The machine is in good technical condition, after prior agreement it is possible to test it. Head Precitech - Germany, Source IPG. Dior plates changed this year. Automatic change - 2 tables. Table 3x1.5 m.

Serial Number: 77653 • Power: 43 kW • Controller: Selco OSI / NC410 • Additional Notes: Power supply 380 VAC, 3-phase, 50 Hz; rated current 81 A; pneumatic air supply 7 bar; suction air speed 30 m/sec; wiring diagram VB003; Weight: ~11,000 kg; Software: Selco OSI, NC410 (release 2.x manuals present); Total switched-on time: ~16,301 h; Total worked material volume: 133.8 m³; Auction-ID: A7-40553-14

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-45901-334

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-45901-335

Cutting Machine – Technical Specifications General data: Slide travel: 500 mm Workpiece support height: 500 mm Cutting capacity (oxy-fuel): With 1 torch: max. 300 mm thickness With 4 torches: max. 100 mm thickness With 6 torches: max. 60 mm thickness Cutting capacity (plasma): With 1 plasma torch: depending on plasma system power Speeds: Working speed: up to 12000 mm/min Positioning speed: 15000 / 20000 / 35000 mm/min Gas inlet pressures (oxy-fuel cutting): Cutting oxygen: 11.5 – 12.0 bar (OmniFlow) Preheating oxygen: 9.0 – 10.0 bar (OmniFlow) Heating oxygen: 1.8 – 2.0 bar Air: 5.0 – 6.0 bar Water: 2.0 – 6.0 bar Gas inlet pressures (plasma cutting): All gases: 12.0 bar Description: Industrial cutting machine designed for oxy-fuel and plasma cutting applications. The system supports multiple torch configurations and offers high cutting capa ...

Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible.

- Display - Program - Luftitsch - Formica air side tables - Spare blades

Polar 115 X Year 2008 Counter: 830,000 Features: 115 cm cutting width Central air table Sidetable Polar LW 1000 Lift 2 Spare knifes Documentation, tools

- Programm - air table - side table left and right - spare knife

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

Working width 2000mm - Adjustable width cutting machine - Hudraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16518

Total cut counter reading: about 227,500, - ED Program Control, - Color monitor, - Light barrier, - Chrome-plated air table, - Chromed side tables, - Back panel cover, - Cutting length: 92 cm, - Insertion depth: 92 cm, - Insertion height: 12 cm, Year of manufacture: 2001, cutting length: 92 cm, Cutting width: 92 cm, Insertion height: 12 cm, Clamp opening: 12 cm, Construction year: 2001

Cutting width of up to 5000mm - used for cutting carpets - Width is adjustable (computer controlled) - Everything seen and tested in working condition - also remains until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16515

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Offer 24477 Technical data: - Cutting range at 90° around 220 mm - flat 250 x 100 mm - Square 170 x 170 mm - Cutting range 45° around 150 mm - flat 150 x 150 mm - Mitre adjustment left + right - Saw blade dimensions 2890 x 27 x 0.9 mm - Cutting speeds 40 + 60 m/min - Hydr. lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.5 kW - Space requirement approx. W 1500 x H 1000 x D 650 mm - Weight approx. 250 kg

Compressed air connection 6 bar Auction-ID: A7-46303-29

In full working condition - Working width 2000mm - cutting width adjustable - Hydraulic lifting arm - Everything seen and tested in working condition - also remains in place until disassembly so that tests can be carried out before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16517

Working width 4000mm - Cutting widths adjustable - For questions about the machine send your email to info@troostwijkvavato.com Auction-ID: A3-43519-16519

Compressed air connection 6 bar Auction-ID: A7-46303-30

Working width 5000mm - Adjustable width cutting blades (computer controlled) - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16516

Cut length: 550 mm, Cutting height: 95 mm, 92 mm with press bar cover, Residual cut: 32 mm, 60 mm with press bar cover, Insertion depth: 570 mm, Compression: automatic compression, Press load: 200 – 1100 daN, Blade drive: hydraulic, Control: 7 inch touchpad, Connection values: 230 V / 50 Hz / 1.5 kW

Connection: 230V Auction-ID: A1-46037-2938

equipped with a breaker and a loading option, The table is in perfect condition, rarely used. After disassembly, it looks the same as before. Auction-ID: A7-46316-2

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC50 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 230 volts Adjustable amperage: 20-40 amps Start: "scratch-start" duty cycle: 40% duty cycle (40A) Technology: IGBT Technology Including: plasma torch, accessories and protective cover Condition: Unused and in the original packaging

With the Kibani Plasma Cutter 2-in-1, you can take your metalworking projects to the next level! This powerful device combines plasma cutting and MMA welding in one machine, making it perfect for professional craftsmen and enthusiastic DIYers alike. With versatile features and reliable performance, you can effortlessly machine and repair a variety of metal types. Realistic performance for every project With a maximum cutting power of 12 mm, this device delivers excellent results in a variety of jobs. The working range of 20–40A (CUT) and 30–120A (MMA) ensures that you always have the right settings, whether you're doing fine cutting or heavy welding. Thanks to its stable operation and protection against voltage fluctuations, you can count on consistent performance. Durable and complete design The plasma cutter is designed with a robust body and a built-in automatic cooling system,  ...

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC130 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts adjustable current: 30-120 A Start: Equipped with: Pilot Arc duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: Plug for CNC control Including: plasma torch, accessories and protective cover Not included: power cable and 380 volt plug Condition: Unused and in the original packaging

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC130 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts adjustable current: 30-120 A Start: Equipped with: Pilot Arc duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: Plug for CNC control Including: plasma torch, accessories and protective cover Not included: power cable and 380 volt plug Condition: Unused and in the original packaging

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC70 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 380 volts adjustable current: 20A - 60A Start: scratch-start duty cycle: 60% duty cycle (60A) Technology: IGBT Technology Protection: circuit breaker Including: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: Unused and in the original packaging

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC50 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 230 volts Adjustable amperage: 20-40 amps Start: "scratch-start" duty cycle: 40% duty cycle (40A) Technology: IGBT Technology Including: plasma torch, accessories and protective cover Condition: Unused and in the original packaging

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Cat.-Nr. 11-370-2 new double jacket and insulated Volume: 2400 Litres - Parts in touch with product in AISI 316 – other parts in AISI 304 without Heating Jacket Material: Parts that come in touch with the product in V4A (AISI 316) – other parts in V2A (AISI 304) Max.Working Pressure. 0,49 bar Surface fully pickled, passivated and neutralised Insulation with Mineral Wool for Hot Water Tanks Thickness = 80 mm Standard Equipment: Manhole on the top Air Release and Pressure Valve in PVC Manhole inside oval 400 x 350 and Manhole outside rectangular for insulation jacket Sample Valve Level Indicator 24 mm Ladder Support Outlet Discharge with Outlet Pipe DN 50 Digital Thermometer Clear Outlet DN 50 Transport Hooks with Insert Heating Element 230/400V, 7,5 kW Diameter: 1350 mm Height: 3130 mm Cyl. Height: 2160 mm F ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 100,000 liters used. The container is used and cleaned from the inside. Length: approx. 15700 mm Diameter: approx. 2900 mm Weight: approx. 16000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We offer the tank system free of charge from the Warstein ...

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

to see used Wasserenthaertungsanlage like in the picture! achievement: approx. 17m

to the storage of custom water / fire-fighting water. the container is used, emptied inside and cleaned expertly. he owns a manhole DN 600 with cathedral lid, two angschweisste feet and will provide outside completely with a new bitumen painting. L = approx. 10.70 m / D = 2.50 m / weight approx. 9.0 to. / ex works, freely charged. for the use as a fire-fighting water tank konnen we the container completely equip with a fire brigade suction connection, consisting of: -1 Stck. Suction management with A-firm coupling to German Institute for Standardization 14319 with special fastener for Feuerwehr-Dreikantschluessel - 1 Stck. Bleeder tube with bonnet - 1 Stck. Bearing pipe with bearing stick for measurement of the filling state - 1 Stck. Cathedral lid with screws and poetry. the suction management can be used as a filling and withdrawal pipe. the components are prep ...

to German Institute for Standardization 6608 - outside with bitumen isolation. L = approx. 10.00 m / D = 2.00 m / weight approx. 6.0 to. / ex works, freely charged. the container is used, emptied inside and cleaned. The container was amended in our work from the outside and was postisolated with bitumen mass. Nevertheless, insulating damages by transport can exist in the container.

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 40.000 liters used. The container is used and cleaned from the inside. Length: approx. 870 mm Diameter: approx. 2500 mm Weight: approx. 7000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . The tank system we offer freely loaded from the location Wars ...

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 60,000 litre single-wall insulated storage tank as follows. Rated capacity 60 cbm Piece 1 used but overhauled, i.e. the container is cleaned, externally insulated. Material steel, material S235JRG2 Documents Manufacturer's certificate / test certificate according to DIN and type plate Piece. Piece. 1 vent nozzle Piece. 1 filling nozzle Piece. Piece. Piece. 1 ladder Piece. Form. cylindrical storage container with feet/console Container dimensions Length approx. 12,680 mm plus insulation 100 ...

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

for the storage of hot water / firefighting water. Dimensions: 2.50 m = D - L = approx. 10.70 m The container is used, empty inside and professionally cleaned and is outside with a coat of bitumen / bitumen insulation provided. Light insulation damage caused by construction and transport may be available at the reservoir. Price from Söhrewald - free of charge-

New Water trough for Heidelberg KORD 64

approx. 20 m³ / 20,000 litres steel tank, firefighting water tank, cistern In good condition, aboveground or underground storage tank, diesel fuel tank, fuel oil tank volume: approx. 20 m³ / 20,000 litres material: steel length: 6,50 m diameter: 2,00 m weight: approx. 3 to 3,5t The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, slurry, AHL, ASL, canola oil or as rainwater tank, firefighting water tank, cistern etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so  ...

water cooler, table cooler, recooler make Güntner, approx.1000KW cooling capacity, Device with 12 fans,throughmeser 1000mm. 416 litres capacity. 12000mm length, 2400mm width, 1500mm height, 8 feet, weight 2950KG.