water filling line used for sale

Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0. ...

Used Krones Filling Line for Flat Drinks in Glass 1997 Manufacturer: KRONES Bought new and installed in 1997 It fills juices, syrups, alcohol Accessories for bottles 0,2 – 0,7 – 1,0 L Capacity: 4,000 L/h Monoblock, frequency regulator Rinser for glass bottles Vacuum filler Krones Capper with Al MCA 28 caps Labeller KRONES–Binetta with precut paper labels, hot glue One label up to half the extent of the bottle (with a possibility for neck), accessories. The control unit replaced in this Krones line There are some conveyor belts in the Krones plant The equipment has relatively few operating hours It has been disconnected for the last 5 years and stored

Used Aseptic Filling Line Tetra Pak A3 FLEX 1000S up to 9000 l h The Used aseptic filling line Tetra Pak A3 FLEX 1000S up to 9000 l h provides an advanced solution for aseptic bottling of liquid products. Specifically, it can reach a production capacity of 9000 liters per hour. This line ensures maximum efficiency and reliability when filling dairy products and juices. Moreover, its fully integrated aseptic process preserves the organoleptic and microbiological characteristics of the product. Main Components of the Aseptic A3 Flex 1000S line Homogenizer and Sterilizer – 12 tons per hourThe homogenization and sterilization system of the Used aseptic filling line Tetra pak A3 FLEX 1000S up to 9000 l/h stabilizes the product and eliminates microorganisms through controlled thermal treatment. Furthermore, its 12 tons per hour capacity allows it to handle large volumes while maintaining ...

Used Filling Line for Sparkling Wine PROCOMAC Up to 6000 BPH Condition and Capacity Firstly, the filling line reaches up to 6000 bottles per hour (BPH), standing as an efficient solution for companies aiming to optimize their bottling processes. Currently stored, moreover, this line offers versatility in handling different glass container formats, specifically 0.375 L, 0.75 L, and 1.5 L, for both sparkling and still wines. Additionally, the isobaric filling technology ensures product integrity throughout the process. Key Components of the Used filling line for sparkling wine PROCOMAC up to 9000 bph The system comprises several key machines. Initially, the TMG depalletizer, model VEGA 60 from 2004, handles empty bottles. Following this, the Procomac filling monoblock, model 56 8 8 141 from 2004, integrates filling stages into a compact solution. Furthermore, the Bertolaso capping machine, ...

Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) In this Used filling line for sparkling wine ...

Technical Specifications & Performance Data This used bottling line is a complete GAI-based solution for small to mid-scale beverage production, engineered specifically for beer. Built in 2016 and maintained in ready-for-operation condition, it delivers consistent quality and reliable throughput for breweries seeking a second hand, high-value system. Manufacturer: GAI (filling monoblock), Enos (labeling) Production speed: up to 900 bottles/hour Filling technology: Isobaric counter-pressure; Fill type: 5 Container types: Glass bottles Bottle formats: 0.33 L, 0.50 L, 0.70 L Product types: Beer (optimized for carbonated beer) Line components: GAI filling monoblock (rinsing–filling–capping configuration), Enos labeling system Condition: READY FOR OPERATION Documentation: Manuals available Safety: Safety features included (guarding and interlocks typical for modern lines) Advanced ...

Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filli ...

Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps) 

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system -  ...

Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling., Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head, Additional title: Years of manufacture: 1975 - 1990, Capacity: 9000 bottles/h, Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate, Features: De-capper; de-c ...

Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner., Additional title: semi-automatic, Capacity: 240 cph, Power: 0.3 kW, Current: 1,85 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 3.2 cbm/h at 6 bar, Length: 5000 mm, Width: 3000 mm, Height: 2300 mm, Operation / Control: SPS S7-200, Features: Single-point, semi-automatic canner Transport unit washer and turner

Returnable glass bottle filling line, Additional title: Years of manufacture: 1991–1995, Capacity: 50000 b/h, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, neck-/breast-/body-/back-labels, Euro pallets, Operation / Control: Siemens S5, Features: decrowner, decrater, bottle washing machine, empty bottle inspector, bottle filler and closurer, filled height inspection, labelling machine, dating, label inspection, crown cork inspection, crater, filled crate inspection, bottle and crate conveyors

Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 ...

Used Doypack Filling Line kg/h Filling Line Technical Configuration The used Doypack filling line, rated at 600 kg/h, comprises a series of 2015 machines that offer precision, hygiene, and reliability in filling flexible pouches. The process begins with product preparation and feeding, ensuring uniform consistency and stability before filling. Next, a FL Tecnics machine, model FL 2.2, handles pouch feeding, weight filling, sealing, and packaging. Specifically, a VARPE control system measures the weight of the product in each pouch with high precision, minimizing variations and waste. Simultaneously, another VARPE unit performs an X-ray inspection, which detects any contaminants or structural issues. Consequently, this adds a crucial level of safety and quality control. Meanwhile, a spiral airflow pasteurizer manufactured by SARP performs the pasteurization phase. Unlike other systems, th ...

1 pc for sale, in working order, good condition Husky HPN 726619 HMI Human Machine Interface FOR SALE XYCOM 9960 Operator Station HMI for Husky G-line, Index-line & others PET Preforms Injection Molding Machines. Exworks Miami USA contact us: j.plaul@optimisense Whatsapp +5491157143569 US Mobile +1.305.831.8888 Skype: optimisense For more info and pictures join our FB group HUSKY USED PET PREFORMS RELATED MACHINERY

Linear bearing, linear rail, linear guide, roller guide rail, without guide carriage, guide rail -Guide rail with: 2 pieces of slide -Length: 1600 mm -Dimensions: in the pictures -Price: per piece -Number: 2 pieces -Dimensions: 1600/100/H48 mm -Weight: 13.2 kg

Used pastry machine CANOL, type: CA-L -in bakery condition- - Dough preparation CA-L (built in 2001) - Calibration unit TS/0 (built in 2002) -Longitudinal section -Guillotine - Incl. many cutting tools (cutting rollers) - incl. band C/L (built in 2001) The system was still in use until recently and works without any problems. Visits and test runs are possible by arrangement.

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripperREXROTH INDRAMAT Type: MKD0771B-061-KP1-KNIdent No. 247238 0001Year of construction: 2000Axis movement: 2400 mmCarriage length: approx. 500 mmTotal length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders)- Standard linear guide 65 x 25 mm- basic profile made of steel- ball screw 32 x 10 mm- pneumatic with position indicator- Permanent Servo Motor Type:

JWell cast film line 160cm widht CPE CPP microembossed cast film line 15-100 gram m2 CPP, CPE embossed film line

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: THK, 4 pieces guide rails with 8 pieces guide carriages/slides -Guide carriage: Type SR -Rail length: 410/340 mm -Rail width: 23 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 410/100/50 mm -Weight: 6.7 kg

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive, electric linear drive, window drive -Manufacturer: Geze, electric linear drive type E212R/230V-AC Ovp -Ident.-No.: 05428 -Stroke length: 42-66 mm -Network: 230 V DC -Shaft: Ø 20 mm -Number: 1x linear drive available -Dimensions box: 230/100/H50 mm -Weight: 1.0 kg

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, roller carriage -Manufacturer: igus DryLin T, guide rail with 2 guide carriages drylin T -Guide carriage: Type TW-01-25 -Rail length: 300 mm -Rail width: 34 mm -Number: 6x linear guide available -Price: per piece -Transport dimensions: 300/70/35 mm -Weight: 1.0 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 20mm long version -Bolt circle: Ø 43x6 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 54 x 80 mm -Weight: 0.2 kg/piece

Linear bearings, flange bearings, housing bearings, flange bearing units, tandem linear ball bearings -Linear bearings: Tandem linear ball bearings -Type: Shaft diameter 16mm long version -Bolt circle: Ø 35x5 mm -Material: Steel casing, plastic ball cage -Number: 8x linear bearings available -Price: per piece/minimum order 2 pieces -Dimensions: Ø 46 x 68 mm -Weight: 0.1 kg/piece

Linear Quick Torque Reaction Arm Max. torque: 25 Nm (18.4 ft.lb) Max. Tool Weight: 2.5 kg (5.5 lb) Function: Linear torque arm for holding screwdriving tools Reduces reaction forces and improves ergonomics For assembly workstations in industry Weight incl. packaging approx. 25kg Pallet 120x80 Auction-ID: A1-46686-1069

Linear Quick Torque Reaction Arm Max. torque: 25 Nm (18.4 ft.lb) Max. Tool Weight: 2.5 kg (5.5 lb) Function: Linear torque arm for holding screwdriving tools Reduces reaction forces and improves ergonomics For assembly workstations in industry Weight incl. packaging approx. 25kg Pallet 120x80 Auction-ID: A1-46686-17

Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml) | bottle volume: 350-1500ml | PET bottles | standard 28/30mm PET caps | 1500 liter of water filling /hour | 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of m ...

Automatic water filling system for up to 18.000 bottles per hour. - Including feeding system for empty bottles to the 40-head rotary rinser. - Rotary filling station (40 heads) with gravity filling principle. The capping unit is working with 12 capping heads and is suitable for 28 and 30mm PE standard caps. - All product contacting parts are made of SS304 or standard food package plastic. - The frame is made of high quality carbon steel Q235 (optional SS304). - MITSUBISHI PLC, WEINVIEW Touchscreen, Specifications: productivity 6.000-18.000 bottles per hour, number of rinsing heads: 40, number of filling heads: 40, 12 capping heads, bottle volume: 350-2000ml, bottle diameter: 50-90mm, bottle height: 150-310mm, filling tolerance: +/- 2%, compressed air: 0.5m?/6bar, filling water: 9m?/h, rinsing water: 3m?/h, power: 380V, 7.5kW, machine dimensions: L4300xW3400xH3050mm, 12.000kg. Please note ...

Automatic water filling system for up to 4.000 bottles per hour. Including feeding system for empty bottles to the 18-head rotary rinser. Rotary filling station (12 heads) with gravity filling principle. The capping unit is working with 6 capping heads and is suitable for 28 and 30mm PE standard caps. All product contacting parts are made of SS304 or standard food package plastic. The frame is made of high quality carbon steel Q235 (optional SS304). MITSUBISHI PLC, WEINVIEW Touchscreen. - Specifications: max. speed of the machine in neutral: 66 cycles/minute | number of rinsing heads: 18, number of filling heads: 12, 6 capping heads | bottle volume: 350-2000ml | bottle diameter: 50-90mm | bottle height: 150-310mm | filling tolerance: +/- 2% | compressed air: 0.5m?/6bar | filling water: 1.5m?/h | rinsing water: 0.5m?/h | power: 380V, 3.5kW | machine dimensions: L2700xW1600xH2800mm | weigh ...

Used KRONES filling triblock for sparkling water 25000 BPH - year 2002Technical Specifications & Performance DataThis electronic filling monoblock integrates rinsing, isobaric filling, and capping in a compact rotary platform engineered by Krones. Optimized for PET bottles and carbonated water applications, it delivers high output with excellent process stability and hygiene. The configuration includes an 80-valve filler, 60-gripper rinser and a 15-head Zalkin capper, using neck-handling transfer for precise container control.Production speed: up to 25,000 bphCurrent bottle format: 0.5LContainer material: PETNeck handling: Yes (neck transfer)Neck finish type: AlaskaFiller valves: 80Capper heads: 15 (Zalkin)CO2 management: Yes (isobaric filling for carbonated products)Machine type: RotaryRotation direction: CounterclockwiseMachine pitch: 111 mmMax container height: 320 mmWorking height: 1 ...

Krones Flat Water Filling Monoblock 2004 KRONES TRIBLOC filling machine with CIP and CTA and HEUFT BOTTLE INSPECTOR. Product type: Non-carbonated water, non-carbonated fruit juices. Rinsing Machine Brand : KRONES Model: Variojet 2,160-54-126 Rinse heads: 54 Wheelbase: 126 Year: 2004/2005 Filling Machine Brand : KRONES Model: SENSOMETIC VP-G-PET 4,320-108-126 Filling valves: 108 Pitch: 126 mm Product: non-carbonated water Sizes: USED FOR 2.0 liters. Can also fill 0.5, 1.0 L and 1.5Lt. Capacity: 30000 b/h Effective size: 2.0 L PET Neck: 30/26 Maximum possible height of the container: 350.00 mm Minimum possible height of the container: 150.00 mm Direction of rotation of the carousel after clockwise entry (from left to right) Year: 2004 With stainless steel KRONES cleanroom housing Capping Machine of Krones triblock Brand: ZALKIN Number of heads: 18 Neck: 30/26 CIP Year: 2004 Voltage 230/400 ...

Used a fully functional and complete production line for bottling still and sparkling mineral water. The line consists of the following equipment: 1. SAMETO EBH 2050 101321ST PREFORM TILTER 2010 2. SIDEL SBO10 BLOW MOLDING MACHINE 2011 3. ALSIM AIR CONVEYOR 1999 4. ALSIM ASMOJET FILLER/RINSE/CAPPER 1999 5. ALSIM MAS-MIX 30/PC MIXER WITH CARBONATOR 1999 6. ALSIM BOTTLE CONVEYOR FOR FILLED BOTTLES 1999 7. ACI BOTTLE DRYER 15kW 2015 8. KRONES CONTIROLL K745G19 LABELING MACHINE 2004 9. ACMI FENIX C9332 SHRINK TUNNEL 2019 10. ALSIM PACKS CONVEYOR 1999 11. SMIPACK HA35-50-70 HANDLING MACHINE 2002 12. ALSIM VALIANT 1I 1P PALLETIZER 1999 13. OBS ROTOMATIC STANDARD PALLET WRAPPER #1 2009 14. OBS ROTOMATIC STANDARD PALLET WRAPPER #2 2009

Used KRONES water bottling line - 32.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-efficiency PET bottle handling and beverage production. Manufactured by Krones in 2006, it delivers reliable performance for industrial packaging operations at scale. The line integrates blow molding, filling, labeling, coding, shrink wrapping, handle application, palletizing, and pallet labeling, creating a robust end-to-end production solution suitable for second hand markets seeking dependable uptime and consistent output quality.Production speed: up to 32,000 bottles per hourBottle formats: Compatible with 0.5L and 1.5L bottle formatsContainers: Designed for PET bottle handlingManufacturer (core equipment): KronesYear of manufacture (core line): 2006Operating hours recorded: 68702Control platform: Siemens PLCsFilling control: Electronically co ...

Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line inclu ...

Used Thermoforming Packing water cup line - 11500 BPHTechnical Specifications & Performance DataThis used bottling line is a complete cup filling and packaging solution engineered for beverage production in water applications. The centerpiece is the TR-ALP 10 cup form-fill-seal machine, designed to thermoform, fill, seal, and cut PET cups with high efficiency. With a 5x2 format (10 cavities per cycle) and a working capacity of 17–20 cycles/min, the system achieves up to 12,000 cups/hour, ideal for second hand industrial packaging lines seeking reliable output. The integrated end-of-line equipment includes a robot cartoner, a case erector, a case sealer, and conveyors for smooth downstream handling.Production speed: up to 12,000 cups/hour (10,200–12,000 cups/hour typical)Cycle rate: 17–20 cycles/minCavity configuration: 5x2 (10 cavities per cycle)Punch size: 71 x 71 mmSuppo ...

Technical Specifications & Performance Data This used bottling line is an integrated SIDEL-based solution for PET still water, engineered for consistent throughput and high line efficiency in beverage production and industrial packaging environments. Nominal speed: 14,400 bottles/hour Bottle formats: 0.06 L, 0.50 L, 0.75 L Container type: PET (neck handling 25–30 mm) Product: Water (still) Core block: Sidel Combi 8-40-8 (SBO 8 blow molder + 40-valve filler + 8-head capper), year 2006 Secondary packaging: CERMEX tray packer for stable tray bundles (small and medium PET formats) Air & cooling: SIAD TEMPO 2 high-pressure compressor 1,500 m³/h; Baltimore Aircoil BAC F-100 evaporative cooling support Conveying: Sidel conveyors for balanced accumulation and smooth transfer Condition: Ready for operation with safety features included Manufacturers involved: Sidel, Cermex, SIAD, Baltimore  ...

Used Isobaric PET Complete Bottling Line for Water CSD 18000 bph 2L Technical Specifications & Performance Data Year 2000 complete PET line with isobaric volumetric filling, configured for 2.0 L at up to 18,000 bottles/hour. Built around Krones and Simonazzi equipment, this used water bottling machine handles still water, sparkling water, and carbonated soft drinks with consistent fill control and stable throughput. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (2.0 L PET) Bottle formats: 2.0 L Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Fill technology: Volumetric isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser/filler/capper monoblock, labele ...

Technical Specifications & Performance DataThis used bottling line is configured for high-efficiency beverage production in 0.5L PET bottles. Optimized for sparkling and still water, the line delivers reliable throughput with robust end-of-line packaging and palletizing. The configuration is non-combi, featuring a separate blow molding machine upstream of the filling monoblock section, ideal for flexible maintenance and line balancing.Production speed: 25,000 bphBottle formats: Compatible with 0.5L bottle formatContainers: Designed for PET bottle handlingConfiguration: Non-combi (separate blow molding and filling)Main components and years: Sidel Universal SBO 14 blow molder (2007), Sarcmi 70-10 ISO Filling Monoblock (1988 – Overhauled in 2025), Labeling machine Sarcmi (2011), Shrink wrapper Zambelli (2004), Handle applicator (2004), Palletizer ACMI double-head (1992).Advanced Automa ...

Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow. Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 20 ...

Complete Bottling Line for Water (PET 1.5L) – Overview This used PET bottling line is configured for still water in 1.5-liter bottles, delivering a performance range of approximately 12,000 to 16,000 bottles per hour. Designed for industrial packaging and beverage production, it combines proven second hand equipment from recognized manufacturers to offer a reliable, efficient solution for a used bottling line. The configuration includes preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors, enabling a seamless end-to-end packaging process. Key components include a preform tipper and elevator by Sameto Technifil, a Siedel SBO10 blow molder, an Alsim Asmojet filler, an Arol cap feeder, a Kronos Contiroll labeling machine, an ACMI Fenix 165 shrink wrapper, and a Smipack HA50 handle applicator. This versatile ...

Used Water Complete Bottling Line Flat Drinks 300 bph 18.9L CapSnap The CapSnap Adapta Series is a modular integrated bottle washing, filling, and capping system. It is the perfect solution for medium-sized HOD water bottling operations. Designed for adaptability – these machines can be configured to handle both 3-Gallon and 5-Gallon bottles. This complete system effectively handles 300 – 600 BPH. Manufacturer: CAP SNAP – Portola – USA Year of production: 1999 (completely refurbished in 2015 and since then it has worked only 500 hours) Capacity: 300 bph Required energy sources: air 6 bar, power 40 kW, cleaning water supply 2 bar and filling water supply Line composition: Semi-automatic cap removal device: This device is used to remove caps from bottles. Entrance conveyor: On this conveyor belt, the bottles are manually placed. Prewash with cold water through nozzles ...

Used PET Bottling Line for Still Water Up to 30000 bph Introduction to the Bottling Line The Used PET bottling Line for still water, has been specifically designed for still water with a maximum capacity of 30,000 bottles per hour (bph). Although currently assembled, the Used PET bottling Line for still water has ceased production at the end of this month but retains its integrity and potential for future reactivation. Configuration and Components of the Used PET bottling Line for still water Several machines work in synergy to form an optimal process at the heart of the Used PET bottling Line for still water. Firstly, the Blow Molding Machine from Sidel, model SBO 20 5270, commissioned in 2001, is crucial for forming PET bottles ranging in formats from 0.33 L to 1.5 L. It is important to note that the molds are not included in the line. Compressor and Quality Control of the Used PET Bot ...

Storage tank, storage tank, fuel oil tank, diesel filling station, yard filling station consisting of: 1 x 30,000 litres capacity storage container 1 x pump type DK-80-MZ Description Containers: according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours ...

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...

Halbautomatischer pneumatically operated hand filler, ATEX compliant, any filling volumes from 20-1000 ml with different dosage piston, higher dosing volumes with multiple hub possible, suitable for filling liquid and semi-solid products