water filling line used for sale

Used Used Packaging Line Ital Pal: Year: 2008 Condition: Good Used Packaging Line Ital Pal Year: 2008 Speed: 5.000 bph Box forming machine Boxes: american Type of closure: with glue Case packer Number of heads: 12 Type of heads: fixed heads Box closing machine Safety protections Code: JM 87 More details: https://bottlingscout.com

Used Used Bag In Box Line 3 LT 2012: Year: 2012 Condition: Good Used Bag In Box Line: Case erector: Sacmi Packaging EC 25 ? 2012 Ultra Clean filling: Sacmi Pakim FB-2 ? 2007 Closing: Sacmi Pakim C.R.C.E. bib ? 2007 Handler: Sacmi Pakim ? 2007 Speed on the format 3 LT: 1.200 pz/hour Equipped for 3 liters Safety Protections Gluer Case Erector MELER Micron 4/2 120P ? 2012 Gluer Closing machine MELER Micron 4/2 100P ? 2007 Conveyors boxes included Codice: OP 10 Code: OP 10 More details: https://bottlingscout.com

Used Used labeller Sacmi Linea Ra adhesive: Year: 2003 Condition: Good Used labelling machine SACMI model LINEA RA Year: 2003 Speed: 9.000 bph Rotative carousel with 10 heads Counterclockwise direction Machine suitable for plastic bottle for detergents 2 adhesive group to apply front and back Code: EA 81 More details: https://bottlingscout.com

Used Used 2019 Complete PET Line KHS 70.000 bph: Year: 2019 Condition: Good Product: Still water Speed: 70.000 BPH Year: 2019 Hopper Preform M. Tanner Preform Elevator Preform Orientator Compressor KHS InnoPET TriBlock Blower PET Labeller: Electronic cam plates 2 Stations Wrap-around roll fed Filler: 96 mechanical valves Capper (including elevator and cap orientator) Type of workable cap: pre-threaded plastic Distribution system: pick & place Bottle inspector Shrink wrapper KHS Modello: nopack Kisters TSP Versione: a lancio di film Palletizer FKI Logistek Model: A-910 Type: Push Pallet Storage Interlayer system Pallet wrapper Lantech Type of wrapping: Rotating arm Pre-stretch Code: NP 692 More details: https://bottlingscout.com

Used Used Complete PET Krones line 30.000 bph: Year: 2004 Condition: Good Used Complete PET Krones line 30.000 bph: Product: Still water (with neck modification can also make sparkling) Speed: 30.000 BPH with bottles of 0.5 lt 30.000 BPH with bottles of 1.5 lt 22.000 BPH with bottles of 2 lt Working hours: 56.000 Preform tipper M. Tanner AG: Model: VZT -4010 Year: 2004 Preform Washing System Krones: High pressure compressor Ateliers Francois: Model: 20G282 Pressure: 40 BAR Blower PET Krones: Model: Contiform 20 Number of cavities: 20 Molds not included Complete with feeder and preform orientator Cap Elevator and Orientator Gassner: Type of caps supported: Plastic pre-threaded cap type: mechanical Type of caps supported: cap sport Cip Steinecker: Model: Media Station UV WEDEDCO: Water treatment using UV rays Monoblock KRONES (composed of filler and capper): Model: Isofill Direction: Count ...

Used Used end Canning Line 2019: Year: 2019 Condition: Good Used end Canning Line 2019: Year: 2019 For cans Speed: 720 packs/hour Type: with tray Case Packer: Number of heads: 1 Pick per head: maximum 3 Head type: magnetic Carton Closer Knecht Model: d-100 Speed: 12 pack/min Operation: automatic (refilling of the carton magazin is manuel) Closure type: hot melt glue If hot melt glue: Robatech Palletizer Ecoma / Kawasaki Model: 200900-25 maximum Packing height: 180 cm Layer pad placing system No pallet wrapper General Information: Layout: o Lunghezza: 4100 mm o Larghezza: 3100 mm o Altezza: 3100 mm Safety protections Code: NP 686 More details: https://bottlingscout.com

Used Used Complete Canning Line KHS 25.000 cph: Year: 2017 Condition: Good Used Complete Canning Line KHS 25.000 cph: Capacity: 25.000 cph Products: beer and carbonated soft drinks Format: 500ml; 211/202 Yom: 2012, 2017 Current condition: still installed ? power on the machine. Can be inspected in dry cycle. Available for dismantling: november 2025. The cans will be packed in tray with foil. Composed of: Bulk can depalletizer: linker dpg-500, yom: 2012 Canceck: transtechhysek, yom: 2012 Can conveyor: linker conveyor rc/khs, yom: 2012 Rinser: linker triplex rinser tr/khs, yom: 2012 Flush pasteurizer: khs innopro 140/14/85, yom: 2012 Filler: khs innofill can dvd, yom: 2017 Seamer: ferrum f08, yom: 2012 Lid feeder: nsm lidservera30, yom: 2017 Conveyor: khs innoline btr, yom: 2012 Filling height control: khs innocheck cub, yom: 2012 Blowing: europool Packing machine: khs kisters sp0502, yom: ...

Used Used Complete Canning Line 18.000 cph: Year: 2017 Condition: Good USED COMPLETE KRONES BEVERAGE CAN FILLING LINE Year: 2017 Speed: 18.000 cph Sentry Bulk Can Depalletizer and empty can single filer Entech empty Can Rinser ? ionized air rinse Krones 32 valve Can Filler, counter pressure (isobaric fill) Ferrum F05 Five Station Can Seamer (set for 202 can ends) CSW Can End Feeder, Type 1 Krones Checkmat Can Inspection System Filtec Can Inspector, model FT 100 (does not convey) Leibinger Inkjet Can Coder, model JET2neo Domino Ink Coder, Model DPX500 Bevco Full Can Conveyors Carleton Helical Tech Can Flip Blocks, 12oz sleek, 12, 16, 19.2 std Bevco Air Knife Graphic Packaging Cartoner, model Quickflex 300 Bevco Laner, model M2-1 KHS / Kayat Tray Former ? Tray Packer, model TP-50A TGW belt and Roller Case Conveyor Columbia Case Palletizer ? High Level, model FL2000 Highlight Pallet Wrapper ...

Manufacturer: Deckel Maho Model: DMU 50 eVo Linear Year of Manufacture: 2007 Machine Type : Milling Machine Installed power: 44 kVA Supply voltage: 400V / 50Hz Machine hours (power on): 24,610 h Spindle hours: 9,820 h Find more here - / Contact us at -

measuring range X-axis: 0 - 200 mm measuring range Z-axis: 0 - 300 mm tool adaptor: SK 40 / BT 40 Resolution: 0,01 mm repeating accuracy: 0,01 mm Ambinent temperature: 0 - 40 °C dimensions of the machine ca.: 0,30 x 0,19 x 0,64 m weight: 44 kg Tool Presetter KELCH - set line V123 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FERAG wire stitching machine Year: 2008 Binding block format V1 Gross: min 152 × 217 – max315 × 340 Net: min 148 × 210 – max 300 × 332 Insert for feeder station Min 110 × 95 – max 315 × 340 Gluing of sheets only – no blocks Net format: min 55 × 85 – max 280 × 200 min 85 × 55 Advertising sleeves and folded inserts with one fold must be tested. Number of insert feeders 8 Number of glued-sheet feeders 1 Maximum block thickness 5 mm Insert pre-fold 8 to 12 mm – back pre-fold only Insert without pre-fold Possible, but not across the entire format range Double production Cutting in the machine not allowed Trimming Head and foot trimming 3.5 – 50 mm Side trimming 3.5 – 50 mm Landscape format cannot be trimmed on the three-knife trimmer, which differs structurally from saddle stitchers and wire stitchers. Staples Number of standard stitching sta ...

This 5-axis DMG MORI DMF 260-11 Linear was manufactured in 2017. It features a large table (3200 mm x 1100 mm), high load capacity (4000 kg), and extensive axis travel (X: 2600 mm, Y: 1100 mm, Z: 900 mm). With a spindle speed up to 10,000 rpm and a 60-pocket tool magazine, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities consider the DMG MORI DMF 260-11 Linear machine we have for sale. Contact us for more information.

This 5-axis DMG ULTRASONIC 50-5 Linear was manufactured in 2010. It features a traverse range of 500 mm in the X-axis, 450 mm in the Y-axis, and 400 mm in the Z-axis. The machine is equipped with a USB 1818 hybrid spindle, offering speeds from 200 to 18,000 rpm for both ultrasonic hard machining and milling. If you are looking to get high-quality machining capabilities, consider the DMG ULTRASONIC 50-5 Linear universal machining centre we have for sale. Contact us for further details.

Manufacturer DMG Model DMU 50 eVo linear Year 2008 3D CNC control HEIDENHAIN iTNC 530 Table NC Rotary Table INCLUDED Table surface 500×380 mm. Maximum weight on table 500 kg Table rotation (C-axis) 0.001º (±360º) Oscillation field (B-axis) 108º Direct Measurement System INCLUDED Routes and advances Longitudinal travel (X-axis) 500 mm Cross travel (Y-axis) 450 mm Vertical travel (Z-axis): 400 mm X-axis fast feed 80,000 mm/min Fast forward Y-axis, Z 50,000 mm/min Fast forward B, C axes 18,000 mm/min Number of Controlled Axles 5 Head Head speed 18,000 r.p.m. BT-40 Head Cone Main Motor Power 30 kW Equipment Automatic tool loader INCLUDED No. of positions in tool loader 30 Internal cooling 40 Bar INCLUDED Coolant tank with paper filter INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel Others Total installed power 52 kVA Machin ...

This 5-axis DMG MORI HSC 70 linear was manufactured in 2014. It features impressive travel dimensions of 650 mm in X, 600 mm in Y, and 380 mm in Z. The machine is equipped with a spindle speed of up to 18,000 rpm and a tool magazine with 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI HSC 70 linear universal machining centre we have for sale. Contact us for further details.

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

more information on request

Automatic Textile Printing Machine Type: VERSATRONIC S-line Manufacturer: Hebbecker Year: 2022 Configuration: 8 stations/pallets 6 printing heads Maximum print area: 400 x 450 mm Pallet drive: frequency-controlled AC servo drive Squeegee-drive system: AC servo high-precision drive 4-cylinder POWER-Squeegee system Main Control Unit: Rotatable control panel with 7” SMART touch display Microprocessor with diagnostic program Printing Programs: 6 standard printing programs High-density program MULTIFLASH program Cool-stop mode Sampling program Start-up/finishing program Screen-Cleaning mode, stopping pallets between print stations Free-wheel-mode Accessories 8 pcs aluminum sandwich pallets 420 x 500 mm with neck 8 pcs aluminum sandwich pallets 320 x 500 mm with neck 8 pcs aluminum sandwich pallets 230 x 500 mm with neck 8 pcs aluminum sandwich pallets 130 x 500 mm ...

Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW

Control: FANUC 18i-T Rotary Ø: 32 mm Turning length: 120 mm Max. speed main spindle: 8,000 min/-1 Max. speed sub-spindle: 8,000 min/-1 SLIDE 1 x-travel 1: 65 mm y-travel 1: 350 mm Tool stations 6 / 4 pos. Fixed stations 6 Powered stations 4 SLIDE 2 x-way 2: 265 mm z-path 2: 320 mm Tool stations 2 / 3 pos. Fixed stations 2 Powered stations 3 CARRIAGE Y2 Tool positions 3 / 2 / 2 pos. Exterior machining 3 Interior Machining 2 Powered stations 2 Weight: 4,500 kg IEMCA BOSS bar feeder

GeneralHSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - Coolant-airblast changeover - MPC (Machine Protection Control); Control: CELOS X with HEIDENHAIN TNC7 Technical DataSpindle taperHSK-E 50 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerApplicationVertical Type of magazineChain Type of gripperDouble gripper Number of tools60 Working area 1Longitudinal450 mmCross580 mmVertical460 mmSpecial equipmentFischer spindle 40,000 rpm with wave cooling 5-axis design Tool magazine 60 places HSK-E50 Production package high chip volume with IKZ (chip conveyor, rinsing gun, rotating viewing panel, AR flushing, IKZ 40 bar/600 1) Oil Mist Separator AFS BlowinSpecial equipmentPreparation aut ...

General SKU300P642 LocationBarneveld MakeElsto TypeC313F P71 No.735004 Main Features MaterialStainless steel Surface0.49 m2 Specified Features - Screen filter Sieve filterScreen filter Sieve sizesDia. 250mm InletDN55 OutletDN40 Capacity0,49m2 Motor0,15 kW, 400 V., 630/760 rpm MaterialStainless steel Information Year of construction2007 Floor space1,3x1,2 M Total height1,8 M Weight180 KgScreen filters-Filters > Screen filtersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Heuft Inspector for 0.5l Euro 0.5l Bracket 0.33l Longleg Bottle Machine can be scheduled by us and bottle run can be adjusted.

travel -x axis: 500 mm travel -y axis: 450 mm travel -z axis: 400 mm c-axis: 360 b-axis: 0 - 108 ° surface area: d: 500 x 380 mm control: HEIDENHAIN - iTNC530 number of spindle speeds: 20 - 18.000 U/min numbers of positions in the tool changer: 60 tool taper: HSK 63 5-axis simultaneous machining center | DMG - DMU 50 eVo linear equipped with NC swivel rotary table, 60-way tool changer, double gripper, ITC (40 bar) and chip conveyor. Additional equipment: - Infrared probing system Heidenhain TS 640 - Laser tool measurement system - Belt filter system The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU50Evo | DMU50 Evo | 50Evo The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spind ...

Highlights − Linear actuator for maximum precision, dynamics and cost-effectiveness − 6 + 2 axes, 2 Y-axes as standard − 2 tools in use at the same time − Thanks to the conversion kit, the machine can be used as an adjustable spindle stick Technical description I-J10010 GILDEMEISTER SPRINT 20|8 linear CNC Swiss Automatic Lathe TECHNICAL DATA: MAIN SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 1: 80 mm Max. speed: 10,000 rpm Nominal drive power: S1 3.7 kW SUB-SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 2: 300 mm Max. speed: 10,000 rpm Nominal drive power S1: 3.7 kW CNC-CONTROLLED AXES Rapid traverse speed: 40 (30) m/min (Y1 only) Acceleration max. X1: 10 m/s2 Feed force (S1) axis Z1,Z2,X2,Y2: 250 daN Feed force (S1) axis Y1: 500 daN Linear axis feed force X1: 60 daN SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 P ...

An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/450mm, max. workpiece dimensions X/Y: 620mm/510mm, inspection speed: approx. 100cm²/s, machine dimensions X/Y/Z: approx. 1200mm/1400mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

travel -x axis: 3.000 mm travel -y axis: 560 mm travel -z axis: 720 mm control: Siemens - 840D number of spindle speeds: 18.000 U/min numbers of positions in the tool changer: 100 tool taper: HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 750 mm, 600 mm, 520 mm

CNC 5-Axis HSC Vertical Machining Center DMG DMU 70 eVo Linear NEW DESIGN Year of construction: 2011 Heidenhain iTNC 530 2-axis NC swivel rotary table Table size Ø 700 x 500 mm Table load max. 350 kg C-axis rotation 360° x 0.001° Swivel axis B-axis 120° x 0.001° X 750 mm Y 600 mm Z 520 mm Spindle drive motor 25/35 kW Spindle speeds max. 18,000 rpm. 60-fold tool magazine positions Tool holder HSK-A63 Electrified tour of the factory Offer number MV-6513

travel -x axis: 3.000 mm travel -y axis: 560 mm travel -z axis: 720 mm control: Siemens - 840D number of spindle speeds: 18.000 U/min numbers of positions in the tool changer: 100 tool taper: HSK 63 Milling machining centers - vertical | DMG - DMF 300 Linear The machine has exclusively processed aluminum is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMF300Linear | DMF300 | DMF-300 Linear | DMF-300Linear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diosna Linear Transport Kneading Machine Spiral Kneader W401A - the LT system consists of - 2 pcs spiral mixer W 401 A - with 8 boilers - With 1 lifting tipper

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

This 4-axis DMC 104 V linear was manufactured in 2005. It features an impressive X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust clamping surface of 1250 mm x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMC 104 V linear vertical machining centre we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMF 220 Linear was manufactured in 2004. It features impressive travels of approximately 220 cm in the X-axis, 56 cm in the Y-axis, and 72 cm in the Z-axis. The machine has a maximum speed of around 18,000 rpm and includes a chip conveyor and coolant filter unit. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMF 220 Linear vertical machining centre we have for sale. Contact us for further details.

This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details.

To mediate on behalf of the customer. Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32 Manufacturer: Gildemeister Control: Fanuc 160iB First commissioning: 2003 #009328 Location: Poland Control Fanuc 160i-B Turning length 120 mm Turning diameter 32 mm Number of axes 8 Travel X1 axis 65 mm Travel Y1 axis 350 mm Travel Z1 axis 120 mm Travel X2 axis 265 mm Travel Y2 axis 235 mm Travel Z2 axis 320 mm C1-axis travel 360° Travel C2 axis 360° Spindle bore 42 mm Spindle speed 8000 rpm Motor power 7.5 kW Total power requirement 34 kVA Dimensions L 4900 x W 1630 x H 1920 mm Weight 4350 kg The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Velati Salami Line existing • Grinder BBTMR 220 • Salt-Band/Spice • Vacuum paddle mash EEC1 • Year 1999

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabinDMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampiTool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard)Number of tools 150Preparation measuring probe TS640 ...

GeneralHorizontal machining centre - Horizontal milling head - Chip trough with integrated Coolant tank 300 l / 130 gallo; Control: 3D Control Siemens 840D solutionline operate Technical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Cross1050 mmLongitudinal800 mmVertical1000 mmCabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics A / BAdditional T-slot pallet 630 mm x 630 mmAdditional T-slot pallet 630 mm x 630 mm / 24.8 in x 24.8 in T-slots 14 mm / 0,55 in, clamping surface following DIN 55201-A2Clamping hydraulics 2/4 channe ...

This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details.

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

General SKU309X465 MakeHaagen & Rinau TypeUnimix No.300975/2290 Year of construction1996 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor30 KW Specified Features - Processing vessel Closed stirring vessel3x Capacity3320 l.(2000 l.)/ 2885 l.(1600 l.) /1445 l. (1200 l.) Dished bottomcheck Slope bottomcheck Dished top sidecheck Flat top sidecheck With covercheck ManholeDN400 Top connectionscheck With jacket2x volume 400 l., 165 l. and 95 l. Max. temperature151°C With anchor stirrercheck With paddle stirrercheck With dissolver stirrercheck Motor18kW, 1450 rpm (EX) With homogenisercheck Motor30kW, 2950rpm (EX) MaterialStainless steel 1.4541 (321) Information LocationBarneveld With switchgearcheck ( as is) Floorspace7x2,5 m Total height± 3.8m ...

Manufacturer: OPS-Ingersol Model: EAGLE-V5 Precision-Line Year of Manufacture: 2025 Type of Machine : Milling Machine with Multi Change Automation Condition: Used.Ready for operation, connected to power Travel Distances - X axis: 550 mm - Y axis: 400 mm - Z axis: 400 mm Rotary Table - Swivel/rotary table with torque drives Spindle - Spindle type: HF spindle HSK-E40 with DDF by Fischer - Spindle speed: 1 to 42,000 rpm - Spindle power: 15 kW - Torque S6 (60%): 6.7 Nm Tool Magazine and Control - Tool magazine capacity: 100 positions - Control: Heidenhain - Weight: 8,500 kg Extra Accessories can be negotiated into the offer. - 20x Erowa ITS 148 Palette Type G with clamping studs for automation - 13x HSK E40 shrink fit chuck d3 by Haimer - 28x HSK E40 shrink fit chuck d4 by Haimer - 14x HSK E40 shrink fit chuck d5 by Haimer Find more here - / Contact us at -

CNC unit for boring and routing Brand: Atemag Type: Function Line Quattro With four tool interfaces 2x boring / 2x routing Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER 25, ER 32

Multispindle drilling head unit for cnc working centres Make: ATEMAG Multispindle drilling head for economical drilling of numerous holes or complex hole patterns in just one machining stroke. Max. drive speed: 10.000 Rpm Max. tool spindle speed: 10.000 Rpm Gear ratio i= 1:1 Torque: max 1-5 Nm Number of tool output: on request

CNC unit for boring, routing and sawing Brand: Atemag Type: Ultra Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M. Gear ratio i = 1:1,5 Turning direction left/right Torque max. 22 Nm Tool interfaces: ER 25, ER 32, saw blade flange 30 mm, dia. max. 300 mm We recommend with saw blade or for heavy duty rough milling a gear reduction: Type DUO, version R Max. drive speed 12,000 R.P.M. Max. tool spindle speed 8,000 R.P.M. Gear Ratio i = 1:0,676 Torque max. 22 Nm

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm x 210 mm Weight:  ...

CNC unit for routing and boring Brand: Atemag Type: Function Line Soft Touch One With surface copying function with fix spindle ER25 and fix bell Max. drive speed 18,000 R.P.M. Max. tool spindle speed 18,000 R.P.M. Gear ratio i = 1:1 Turning direction left/right Torque max. 10Nm Tool interface: fix ER25 Adjustment distance: 70mm