water cutting used for sale

1kw year 2017

Slitting line 2,100 x 14 mm Bandwidth... 2,100 mm Strip thickness 4-14 mm Coil weight.. 35 tons. Coil Diam. I 508-810 mm Coil Diam. Rewinder 750 mm Coil A Dia. 2,000 mm Knife shafts diameter 380 mm Connected load 660 KW

Manufacturer: Ramatech Model: Speedy 35 Year of Manufacture: 2007 Operation hours : since February 2008 has run daily for 6-10 hours until February 2025 without knife block / with tool rack base TECHNICAL SPECIFICATIONS Function : Cutting and stripping of cables Cable diameter : 4 mm to 35 mm Cable cross-section : Up to 185 mm² Cable length : 220 mm to 1000 m Length tolerance : Repeat accuracy better than ±0.2% for lengths over 2 m Stripping length : At start and end from 10 mm up to 9999 mm Partial stripping length : Freely programmable Processing speed : 0.1 – 2.2 m/s, programmable Acceleration: Programmable Cable guidance : Quick-change cable guides Cable pulling force : Not specified Electrical connection : 3 x 400 VAC + N / 25 A Frequency : 50 Hz Pneumatic supply : 6 bar Weight : 450 kg Dimensions (L x W x H) : 1300 x 800 x 1500 mm Find more here - / Conta ...

Key data: 2 mm, 12 mm

Cut-to-length line 2,000 x 12 mm Bandwidth. 2,000 mm Tape thickness... 4-12 mm Coil weight 30 tons. Straightener 11 reels Speed 15 m/min. Main Engine. 200 KW Voltage. 380 V / 50 Hz.

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Stock# UG6393 Used cutting mill by Rapid (SE) model G200-48 KURF. Mill is driven by 7.5 kW, 1470 rpm, 230-400 V, 50 Hz. Main feeding inlet has dimensions: 480 mm x 230 mm. Mill has also additional side feeding inlet for work on profiles. Rotor has bolted 12 knives, on side walls of milling chamber there are bolted two static knives. Bottom discharge via screen (10 mm) through blower, cyclone into the collection station.

Inv. Num. : 8886 Type: RUR 2500 Producer: PIERCE Created: 2005 Parameters: Work table length: 6000 mm Work table width: 2000 mm Equipment: Source: Plasma and autogen

This machine is ideal for use in bakeries, restaurants, or grocery stores. It impresses with its robust construction, ease of use, and consistent slicing quality.

WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system

-Manufacturer: Seewer AG -Model: SFT 262,+ 23 -with 2 cutting rollers band is renewed -Mobile on castors

Flatbed Laser Machine Manufacturer: Rolf Wissner Model WiTEC 32 Performance: Machining Area: 3050mm x 2050mm Year of Make: 1999 Control: Beckhoff TwinCAT Laser: Low Power Co2 laser rofin sinar SCX 30 16.1 (built in 2022) Fully functional Transport Dimension: 2950mm x 5050mm

CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of Make: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with power source Hypertherm XPR300 incl. Optimix gas console 1 x drilling spindle 26 kw to 40 mm diameter, incl. 8-fold tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting program on the CNC control Availability: May 2026

Key data: 230 mm, 460 mm, 25 U/min

Optimum D460x1500 lathe – fully functional Description: For sale is a used Optimum lathe D460x1500, built in 2006/01. The machine is fully functional and ready for immediate use in the workshop and production. It is ideal for turning medium-sized metal and steel parts. Technical data: Manufacturer: Optimum Model No.: D460x1500 Year of construction: 2006/01 Circumferential diameter over bed: 460–465 mm Circumferential diameter over upper slide: 270 mm Circumferential diameter without bed bridge: 690 mm Center width: 1500 mm Tip height: 230 mm Bed width: 300 mm Spindle bore: 58 mm Spindle cone: MK 6 Spindle mount: Camlock ASA D1–6 Speed range: 25 – 2,000 rpm⁻¹ Longitudinal feed: 0.031 – 1.7 mm/rev Transverse feed: 0.014 – 0.784 mm/rev Thread metric: 0.1 – 14 mm Thread imperial: 1/2 – 2 gears/inch Motor power ...

Inv. Num. : 8905 Type: LF 3015 E Producer: G-WEIKE Created: 2022 Parameters: Operating hours: 900 h Laser power: 1.5 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet metal cutting thickness (steel): 10 mm Source: CWFL-1500 Equipment: Cover (including glass)

M. No.: 5561703 Format (cm): 76 Equipment / Additional information: Side tables, air table, 1x reserve knife

Bystronic Bystar 4020 Year of construction : 2008 4.4 KW in 2018 completely overhauled by Bystronic At that time, a glass overhaul was carried out and the turbine was replaced by a magnetically bearing turbine. Electrified.

Air table right and left 1 spare blade Rear table cover Large color monitor

Plasma cutting machine Manufacturer: Swift Cut Type: Pro 3000 Year of Make: 2022 Travel paths X/Y: 3,000 x 1,500 mm Power Source: Hypertherm Powermax65 SYNC Sheet thickness mild steel max.: 16 mm Sheet thickness stainless steel (VA) max.: 12 mm Sheet thickness aluminium max.: 12 mm Table length: 3,000 mm Working width: 1,500 mm Table width: 1,500 mm

CNC gantry flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of Make: 1995 CNC Control: Global Control Plus Track width: 7,000 mm 8 x oxy-fuel burner type ALFA 8 x Omnilift 200 Without a running track Without table Without filter Reference Number: R2137

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

Year of manufacture 1980s/90s Technical data: Tip height: 185 mm Center width: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock mount: MK 3 Quill stroke: 110 mm Dimensions (WxDxH), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw lathe chuck, brand: Röhm, ø 200 mm - Quick-change holder with 4 inserts - Bed stop - Chip tray

Technical data: - Saw blade dimensions 2530 x 20 x 0.9 mm - 2 cutting speeds 30 + 60 m/min - Cutting pressure regulation - Machine table left + right swivel for mitre cuts - Cutting area - at 90° around 220 mm - Square flat 230 x 185 mm - flat 280 x 250 mm - at 45° around 150 mm - flat 150 x 210 mm - at 60° left about 90 mm - Drive 400 V - Space requirement approx. W 900 x H 1600 x D 1500 mm - Weight approx. 390 kg

MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model No.: SPL-PA 4501.15+S50 Machine Type: CNC Plasma Cutting Machine CNC Control: iMSNC Construction: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection extraction system: 400 volts Motor power extraction system: 7.5 kW Compressed Air Generation: Screw Compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: available Location: Waltenhofen, Germany Dismantling and loading by sellers included

Two nearly identical Rofin laser machines are available. Wavelength: 10600nm, operating power: 4kW, max. pulse power: 8kW, pulse duration: 0.5ms, laser type: CO2 slab laser, cooling: diffusion cooling, max. pulse frequency: 5000Hz, polarization: linear, excitation: RF, gas type: premix. Machine dimensions X/Y/Z: approx. 2300mm/1000mm/1900mm, weight: approx. 1700kg. Documentation available. On-site inspection is possible.

Key data: 3075 mm, 1545 mm

Technical data – machine • Manufacturer: BALLIU nv (Belgium) • Machine type: MINOTAUR • Year of construction: 2014 • Machine type: CO₂ laser cutting machine (portal) • Working area: Large format flatbed (4XL) • Control: BALLIU / Industrial Control • Power supply: 3× 400 V / 50–60 Hz • CE compliant ⸻ Technical data – laser source • Laser manufacturer: ROFIN-SINAR Laser GmbH (Germany) • Type: DC 025 • Laser type: CO₂ laser, diffusion-cooled • Laser power: approx. 250 W • Cooling: Water cooling • Weight laser: approx. 545 kg • Standards: CE / CDRH / DLR license

Pendular saw BOTTENE - with rollers

Double sided cutting saw COMEC mod. TD1200 - CE rules - N. 2 motors 2 hp - N. 2 blades diam. 350 mm - Min / max working length 220/1200 mm - Cutting inclinations: horizontal +/- 35°; vertical +/- 35° - Volt. 380/50 - S/N 961228 - Year 1996

Height=1.82 m, Overall length= 1.11 m, Overall width= 1.16 m, Net weight= 318 kg,

Height=1.77 m, Overall length= 1.58 m, Overall width= 0.89 m, Net weight= 343 kg,

Height=2.28 m, Overall length= 1.82 m, Overall width= 1.47 m, Net weight= 680 kg,

Height=1.82 m, Overall length= 1.16 m, Overall width= 1.11 m, Net weight= 318 kg,

Height=1.87 m, Overall length= 1.2 m, Overall width= 1.42 m, Net weight= 557 kg,

AJAN SHP 260 plasma-gas cutting machine was built in 2015 in Turkey by Ajan Elektronik Servis San. Ve Tic. Ltd Şti. The machine, distinguished by its high efficiency, is an excellent choice for thermal cutting of sheet metal. The machining process is performed by means of reliable torches, located on two separate gantries. This solution, combined with the large surface area of the work table, enables the machining of more than one sheet at a time with different cutting methods. The AJAN plasma-gas cutting machine is offered with equipment that includes, among others, a HYPERTHERM plasma source of the highest energy efficiency, exhaust extraction and a track. The total weight of the machine is 520 kg. Technical specifications of the AJAN SHP 260 plasma-gas cutting machine - CNC controller: AJAN - working table dimensions (L x W): 16000 x 3000 mm - plasma source: HYPERTHERM - plasm ...

Paper cutting machine Polar 66 ECO Year of manufacture 2012

This LVD Sirius 3015 PLUS was manufactured in 2015. A robust CO2 laser cutting machine, it includes an automatic nozzle changer and has logged 22,192 operating hours. The package comes complete with a laser source, cooler, extraction unit, and various wear parts including nozzles, lenses, and additional lens holders. If you are looking to get high-quality cutting capabilities consider the LVD Sirius 3015 PLUS machine we have for sale. Contact us for more information about this machine.

This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information.

This SEI MERCURY 603 1520 350W Laser cutting machine was manufactured in the year 2007 in Italy. The machine has a laser power of 18,5 kW.

This 3-axis Bystronic BySprint Fiber 3015 was manufactured in 2016, designed for precision fiber laser cutting. It handles a nominal sheet size of 3000 x 1500 mm and supports a maximum workpiece weight of 890 kg. The machine dimensions are 11,000 mm in length, 6,050 mm in width, and 2,565 mm in height. If you are looking to get high-quality cutting capabilities consider the Bystronic BySprint Fiber 3015 machine we have for sale. Contact us for more information.

This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information.

This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information.

This Prima Power Platino Fiber laser cutting machine was manufactured in the year 2014 in Italy and has 26437 production hours, of which 11414 are laser hours. The machine has a laser power of 3 kW, is in good condition and well maintained.

This 3-axis Trotec Speedy 360 was manufactured in 2019, featuring a robust CO₂ laser system with a power range of 40-120W. It offers a maximum working area of 32 × 20 inches and supports a variety of materials with its multifunctional table options, including a vacuum table and honeycomb cutting tabletop. Ideal for precise cutting and engraving, this machine includes JobControl® Expert Software for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the Trotec Speedy 360 machine we have for sale. Contact us for further details regarding this machine.

This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine.

This HGTECH TP 6535 PLUS was manufactured in 2024. It is a fiber CNC cutting laser designed for cutting pipes, tubes, and both closed and open profiles. It operates with power ranging from 1 to 6 kW and can handle pipes up to 8.5 meters long and 280 mm in diameter. Contact us for more information about this machine.

This Prima Power CP 4000 Zaphiro Laser Cutting machine was manufactured in the year 2013 and has 37978 laser hours. The machine has a laser power of 4 kW.

This 5-axis NUKON Fiber Laser Extreme 30250 was manufactured in 2021. It features a 12 kW fiber laser, Beckhoff CNC control system, and a maximum sheet size of 2,500 x 12,000 mm. The machine supports speeds up to 50 m/min and includes a servo drive system. Consider the opportunity to buy this NUKON Fiber Laser Extreme 30250 fiber laser cutting machine. Contact us for more information about this machine.

This Sei Laser Mercury 1530 Fiber laser cutting machine was manufactured in the year 2017 and has 4000 production hours. The machine has a laser power of 1,5 kW.

This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information.

This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, its ideal for precision cutting tasks. Consider the opportunity to buy this VOORTMAN V304 plasma cutting machine. Contact us for further details.

This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information.