water cutting used for sale

Manufacturer: PEAFFER Model: P160 H/I Power: 8 HP Voltage: 380 V Phase: 3 Frequency: 50 Hz Find more here - / Contact us at -

Offer 25300 Specifications: - Manual band sawing machine - Saw blade dimensions 2750 x 27.0 x 0.9 mm - Cutting speeds infinitely variable N 15 / 90 m/min - Max. clamping possibility 355 mm - Mitre adjustable li + re up to 30 ° - Cutting range - 90° round 255 mm - Square 190 mm - flat 310 x 190 mm - 45° li + re round 215 mm - Drive 400 V / 1.5 kW - Coolant device - Weight approx. 350 kg - Space requirement approx. W 700 x H 1600 x D 1700 mm

A Bystronic CNC laser cutting system is available. Laser type: ByLaser 4400, laser power: 4400W, wavelength: 10.7µm, working dimensions X/Y: 3000mm/1500mm, cutting dimensions X/Y/Z: 3000mm/1500mm/170mm, positioning speed: 80m/min, simultaneous positioning speed: 113m/min, acceleration: 4.5m/s², positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. workpiece weight: 890kg, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Machine dimensions X/Y/Z: approx. 12900mm/6100mm/2100mm, weight: approx. 13500kg, laser hours: 58157h, blower hours: 93930h, pump hours: 10398h. Includes water cooling unit, without extraction. The control was completely renewed in 2025. Documentation available. An on-site inspection is possible.

Multi-bar cutting machine type Schilt FLEXBAR 300 AE & cutting / shears SE 300 Active rack for rebar with 1 or up to 6 levels, Electrically driven infeed conveyor with coated rollers Hydr. Reinforcement cutting machine with 150 mm or 300 mm saw blade width the warehouse holds 14 m of reinforcing bars 12 m conveyor belt with volcano rollers Capacity of the system: at 8 mm diameter - 30 rods in one operation at 14 mm diameter - 18 rods in one operation at 28 mm diameter - 7 rods in one operation at 50 mm diameter - 2 rods in one operation

cutting machine 1995 cutting width: 920 mm ED operator panel with graphic display programmable light barrier air table on stock available: immediately location: Germany

Product Features: The K65 series is a high-speed laser tube cutting machine designed specifically for processing small and medium-sized tubes. Its development and design focus on addressing industry pain points such as low cutting efficiency, significant waste, and unstable cutting accuracy. It features high speed, efficiency, precision, and minimal waste. It can efficiently process a variety of tubes, including square and round tubes, with diameters ranging from 8mm to 120mm. It is widely used in industries such as vehicle frames, metal furniture, display cases and shelving, fitness equipment, automotive parts, and medical devices.

Key data: 3000 , 1500 , 3000

1. Employs world-leading fiber lasers with a fixed optical path design, eliminating optical path maintenance, reducing operating costs, and ensuring high cutting quality and processing efficiency. 2. The machine tool adopts a gantry structure with a rack and pinion dual servo drive structure, achieving a maximum acceleration of 0.8G, ensuring high-speed and high-precision operation. 3. Stable optical path and control systems that are simple to learn and operate. 4.Uses top-brand fiber lasers, resulting in excellent beam quality, stable output power, and precise cutting.

Control: FANUC Travel distance: X= 500, Y= 350 Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg

Offer 25432 Specifications: - Turning diameter 320 mm - Center width 750 mm - Largest turn – Ø over bed 550 mm - via flat slide 175 mm - Spindle bore 32 mm - Spindle holder - Pick-up cone of the tailstock quill MK 3 - Quill stroke 180 mm - 18 spindle speeds 85 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrical Pitsch thread -Arbor - Cheek chuck -Lunette - Drive 400 V / 2.2 kW - Space requirement approx. W 2100 x D 750 x H 1300 mm - Weight approx. 750 kg

Manufacturer: Optimum Year of construction: 2024 Condition: as good as new, workshop tested Delivery time: immediately available Specifications Tip height: 165 mm Center width: 830 mm Circumferential diameter over bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Speed ranges: 16 steps, 70–2000 rpm⁻¹ Drive motor: 1.5 kW, 400 V, 50 Hz Spindle holder: Camlock DIN ISO 702-2 No.4 Spindle bore: 38 mm Spindle cone: MK5 Tailstock mount: MK3, quill stroke 110 mm Weight: approx. 512 kg Machine dimensions (LxWxH): 1685 × 745 × 1590 mm Gradients and feed Metric: 0.4-7 mm/rev (26 pitches) Inches: 56-4 Gg/1" (34 pitches) Longitudinal feed: 0.052–1.392 mm/rev (32 feeds) Face feed: 0.014–0.38 mm/rev (32 feeds) Accessories: Fixed bezel (Ø 6–50 mm) Rotating bezel (Ø 8–3 ...

Weiler Commodor – lead and pull spindle lathe (partially overhauled, built approx. 1990) Condition: Partially overhauled, very good general condition Year of construction: approx. 1990 Manufacturer: Weiler Model No.: Commodor Machine Type: Lead and Pull Spindle Lathe Technical data (approx. information): Max. turning diameter over bed: 380 mm Max. turning diameter over support: 190 mm Max. turning length: 1000 mm Bar Passage: 56 mm Speed range: 25 – 2000 rpm Spindle Nose: A2-6 Drive power: 4.0 kW Tailstock: MK4 Automatic longitudinal and flat feeds: 0.011 – 0.80 mm/rev Thread ranges: Metric: 0.3 – 10 mm Inch: 80 – 2 3/4 G/" Diametrically Pitch: 80 – 5.5 Dp Module: 0.2 – 5 Dimensions (L x W x H): 2200 × 1200 × 1800 mm Weight: approx. 1500 kg ⚙️ Equipment & Accessories: 3-Axis Digital Display SINO (New)  ...

Bread slicer MHS Compact Circular knife machine mobile Knives newly sharpened and coated Manual operation via membrane keypad simple, robust technology Dimensions: 600 x 730 x 1200 mm, WxDxH only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Spare blade Maintenance contract Delivery Service Package E-Box Instruction & Commissioning

Bread slicer MHS creel BM 45 N Creel cutting machine floor model Cutting thickness 10 mm Automatic Controls with crumb drawer at the bottom Stainless steel version, knife lubrication with original Teflon special knife Machine mobile with brake only DGUV V3 tested by us Connection 400V, 16A-CEE plug Dimensions: 600 x 750 x 1100 mm, WxDxH Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Leasing & Rental Service Maintenance contract Delivery Instruction & Commissioning

Bread slicer MHS Compact Circular knife machine mobile Knives newly sharpened and coated Manual operation via membrane keypad simple, robust technology Dimensions: 600 x 730 x 1200 mm, WxDxH only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Spare blade Maintenance contract Delivery Service Package E-Box Instruction & Commissioning

- Brand: Mayper - Model: MAPC 3280 - Cutting chamber: 830 x 320 mm - Open rotor - Slanted cut - Engine: 40 hp (30 kw) - 3 HP (2.2 kw) vacuum cleaner -Electric motor

Laser Center of Lasag AG TYPE: FLS 542 C Year of Make: 2006 There are 2 systems each for the laser center (2x optics, 2x laser source) There are also the fiber optic cables and the transformer blocks for the laser sources as well as a PC control system. The plant was dismantled and stored in full working order at the end of 2024.

The machine is in good technical condition, testing is possible after prior agreement. Machine on - 92331 h

Max. size= 92 x 92 cm, Availability= 112025, Working width 920mm Stack height 120mm Programmer unit Central air table Side tables with air Chrome table surface anti rust Photocells CE Hydraulic drive of the pressure beam with fully adjustable force Spare knife, operating tools Weight app. 1700 kg 380V power supply LOT Loaded in truck or container

table length: . mm table width: . mm burner heads: . : 2 total power requirement: . kW weight of the machine ca.: 1478 KG dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TOS Galanta SUIL 40A – Lead and Pull Spindle Lathe For sale is a well-preserved and mechanically overhauled 2009 TOS Galanta SUIL 40A lead and pull spindle lathe, built in 1998. Specifications Manufacturer: TOS Model: Galanta SUIL 40A Machine number: 0219 Year of manufacture: 1998 (mechanically overhauled 2009) Dimensions: approx. 2.2 m × 1.1 m × 1.75 m Weight: 1620 kg Main drive: 5.5 kW Spindle speed (max.): 3150 rpm Spindle bore: 50.2 mm Center spacing: 1000 mm Center height: 200 mm Turning diameter over bed: 400 mm Condition: ready for use (used) Accessories Three-jaw chuck Tailstock Lunette Coolant Setup Interchangeable Wheel Set Operating instructions (German) The machine is fully functional. Viewing possible by appointment

A used cutting machine Polar 92 EM Air table Side Tables Program

A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible.

For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately.

Laser power: 2000W, wavelength: 10.6µm, working dimensions X/Y/Z: 3000mm/1500mm/75mm, max. material thickness mild steel/stainless steel/aluminum: 15mm/6mm/5mm, max. table load: 550kg, travel speed: 60m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm. Machine dimensions X/Y/Z: approx. 7400mm/3300mm/2300mm, weight: approx. 8900kg. Documentation available. An on-site inspection is possible.

A CNC laser cutting system Bystronic is available. Laser power: 2200W, max. sheet dimensions X/Y: 3000mm/1500mm, travel path X/Y/Z: 1562mm/772mm/100mm, max. material thickness mild steel/stainless steel/aluminium: 8mm/6mm/4mm, positioning accuracy: +/-0.1mm, simultaneous speed: 140m/min, load capacity loading table/cutting table: 300kg/80kg. Machine dimensions X/Y/Z: approx. 6250mm/6000mm/2150mm, laser source dimensions X/Y/Z: approx. 1900mm/950mm/1250mm, weight: approx. 13500kg. Including combined cooling and filtration unit WKL 300-F. Dokumentation vorhanden. An on-site inspection is possible.

A cutting and winding machine Olbricht is available. Documentation available. An on-site inspection is possible. Expected to be available from the end of January.

for cutting machine 122 N:, Circular knife shaft complete with 91 knives - 2.8 mm cut,, Flat knife - holder without knife for 2.8 mm cut,, Round knife - shaft with nut, without knife,, Mincer shaft pitch 28 for 10 mm cubes - without knife, Complete list on request

Paper cutter EBA 430 E, format 43 cm, in as new condition with optional box stand. With all serial equipment and operation manual. Safety cover in from and back.

A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible.

Type: Platino Fiber Manufacturer: Prima Power Year: 2014 Laser power: 3000 W, IPG 3000 X: 3065 mm Y: 1560 mm Z: 150 mm Max.sheet thicknesses for cutting: Carbon steel (S420MC, 1.10980) - 20 mm Stainless steel (X5CrNi18-10, 1.4301) - 8 mm Aluminum AlMg3 (3.3535) - 8 mm Copper, brass (Cu-ETP, CuZn37) - 6 mm Machine in good condition, under power. Find more here - / Contact us at -

Air table 2 side tables 2 knives Photo cells Program

cutting width: 92 cm feeding depth: 92 cm feeding high max.: 12 cm serial no.: 72739 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BODOR T230 tube and profile fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. The machine, which is distinguished by its use of the state-of-the-art technology available on the market, is the best choice for even the most demanding tasks in many industries. It enables precise cutting of tubes and profiles with a square cross-section by means of a stable 1 kW fibre-optic beam. During the machining process, the cutting head with auto focus function stores the focal length values in the control system separately for each type of material. The intelligent technology developed by BODOR, in turn, reduces the piercing time by 90%, regardless of the thickness and type of material. All these solutions reduce energy consumption and the amount of cutting gas to a minimum. The T230 tube laser cutting machine is also extremely easy to operate. The machine operator has an a ...

BODOR P3015 fiber laser was built in 2020 in China by Jinan Bodor CNC Machine Co.,Ltd. Distinguished by its use of the most advanced technology available on the market, the machine is the perfect choice for even the most intensive challenges. It enables the precise machining of sheet metal with a maximum length of 3000 mm and a width of 1500 mm by means of a stable 2 kW fibre optic beam. During the machining process, the cutting head with autofocus automatically adjusts the focal position depending on the thickness of the material. The nozzles, in turn, are automatically changed, calibrated and cleaned to ensure reliable operation throughout their service life. All this is completed by the 360° anti-collision system developed by BODOR, which predicts and detects any obstacles. The BODOR P 3015 fibre laser is also extremely easy to operate. The machine operator has an advanced nume ...

CNC Portal Plasma Cutting Machine with Skew Rotator Bevel Bevel Manufacturer: Messer Type: Multitherm 4000 Year of Make: 2020 CNC Control: Global Control Plus Working area: 3 x 12 m Track width: 4,000 mm 1 oxy-fuel burner ALFA 1 plasma torch with Skew Rotator Bevel bevel unit Power Source Hypertherm XPR300 Cutting thickness: 50 mm hole piercing 80 mm cut-off Extraction table Beuting without filter system Software: Omniwin with Bevel

Bystronic Byspeed 3015 Bylaser 5200 ARC Control: ByVision Suction Donaldson Car Charge-Discharge System Auction-ID: A7-32339-2

UNTHA Shredder Model RS30 Year 10/2023 Hours: 97 Power 22kW 400V/50Hz CE marked In ‘as new’ condition

Max. size= 92 x 92 cm, Availability= 032026, computer control, programmable basic model Color TFT display light barrier Chromed air table 2 side tables left right Dimensions: 212 x 216 x 154 cm Net weight : 1890 kg LOT Loaded in truck or container

Digital Center height 150 mm Circulation over bed 300 mm Center width 1000 mm 3-jaw chuck, Arbor Chip protection Chip tray

- Programm - air table - side table left and right - spare knife

Height=1.38 m, Overall length= 0.9 m, Overall width= 2.52 m, Net weight= 179 kg,

Height=1.95 m, Overall length= 1.55 m, Overall width= 1.32 m, Net weight= 577 kg,

Height=1.21 m, Overall length= 1.17 m, Overall width= 0.98 m, Net weight= 118 kg,

Height=1.65 m, Overall length= 0.94 m, Overall width= 0.89 m, Net weight= 186 kg,

Availability: immediately Current Type: AC Operating voltage: 230V/50 Hz Control voltage: 24 V DC Rated current of the machine: 7.6 A Weight: 213 kg

Cutting Machine / Guillotine – Polar 92EM-MON Model year: 1994 Serial No.: 6411657 Specifications & Features: Maximum cutting width: 920 mm Monitor with programmable control Air bed Light guard (safety light barrier) Side tables 2X Spare knife included Manuals included Machine is in very good condition Available immediately from our warehouse in 67269 Grünstadt Germany

Manufacturer: Wohlenberg • Machine Type: Paper Cutting Machine / Guillotine • Cutting width: max. 760 mm • Cutting height: approx. 120 mm • Year of manufacture: 2004 • Application: Cutting stacks of paper, cardboard, printing sheets in printing and bookbinding shops • Control: Electronic display, programmable cutting sequences • Equipment: air table, side tables, light barriers for safety, hydraulic press beam • Accessories: 4 x spare blades

A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible.

Key data: 4000 mm, 12000 mm, 12000 W

4000 x 2000mm 12000w

EBA Multicut 10/550 Year: 1992 550 mm cutting width digital read out (display not working) hydraulic adjustable clamp & cut