136,088 used machines on RESALE, but how to find them? Machine Search
diameter: div. number: 56x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: div. number: 16x tool adaptor: SK 50 Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 30 mm square edge steel: 25 mm L-beam: 28 x 10 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Haffner SL100 door lock milling machine for simultaneously: Milling out the lock case using a chain cutter Milling out the lock faceplate using a faceplate cutter Drilling out the handle and keyhole using a drill bit. Technical data: Chain cutter motor: 1.7 kW Rebating cutter motor: 0.6 kW Drill motor: 0.25 kW Blade length: 150 mm Chain width: 1217 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany
Festo ZA 2T tenon cutter for the precise milling and sawing of tenon joints in solid timber, as well as for the manufacture of windows and doors. The machine enables perfectly fitting timber joints thanks to precise depth and length adjustment with high repeatability. Ideal for window and door construction as well as for traditional timber joints in furniture making, including a set of Gold IV68 milling tools. Technical data: Cutter diameter: max. approx. 340 mm Cutting height: approx. 80 mm Travel distance: approx. 1,300 mm Further technical data: On request Condition: Gebraucht Location: Tauberbischofsheim, Germany
round bar steel: - mm square edge steel: - mm L-beam: - mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2,212,35 m div. punches and dies Foot switch Spare blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 50 mm square edge steel: 45 mm L-beam: 150 x 14 mm total power requirement: 4 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,3 x 1 x 2,1 m No. 3418 5-fold combined profile steel shears with flat steel shears PEDDINGHAUS 210 Super 16 pressure capacity 80 to Round steel 50 mm Square steel 45 mm angle steel 150 x 14 mm Punching up to 90 mm diameter 5.5 HP Space requirement 2.30 x 1.0 x 2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tool taper: 54 x SK 50 worktool system: 27 x System TUL Kelch Packing: 1200800350 mm Shipping weight: ? kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
puncher: 70.0 t square edge steel: 45.0 x 45.0 mm round bar steel: 45.0 mm L-beam: 150 x 150 x 13 mm hole punching press: capacity (dia. x thick.): Ø 27.0 x 20 mm shear: flat material: 450 x 15 / 300 x 20 mm throat: 300 mm work stroke: 70.0 mm work height max.: 1095 mm total power requirement: 9.0 kW weight: 1925 kg range L-W-H: 1800 x 1200 x 2000 mm current new price approx. 25.000 euros special price on request Equipment: - electro-hydraulic profile steel shears with 4x work stations flat steel shears profile steel shears hole punch notching station - driven by two hydraulic cylinders - stepless stroke adjustment - support table at hole punching & notching station - material stripper - side storage options - 2x freely movable foot switches - operating instructions (PDF) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector The data for this ad was cre ...
MIKRON A 60 ist eine Fräserschleifmaschine, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Fräser-Ø 8–80 mm, Fräserbreite max. 100 mm, Schleifscheibe Ø max. 100 mm, Hub einstellbar 5–135 mm; Hubgeschwindigkeit stufenlos bis 70 c/min; Schleifscheibendrehzahlen 3 Stufen 3250–6200 t/min. Technische Daten: Anschluss 50 Hz 3x380 V, Antrieb 1 CV, Gewicht ca. 450 kg, Abmessungen L800×B800×H1200 mm. Ausstattung: Lampe und Kühlmitteleinrichtung. Erreicht enge Toleranzen; geeignet für Automotive, Werkzeugbau, Luftfahrt, Medizintechnik und Uhrenindustrie. Technische Daten ohne Gewähr
MIKRON 121 ist eine Fräserschleifmaschine, entwickelt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsbereiche: Fräser-Ø 16–53 mm, max. Fräserbreite 25 mm, Schleifscheiben-Ø max. 76 mm; Teilungen: 5 (von 10 bis 30). Technische Daten: Anschluss 50 Hz, 3x 380 V; Antrieb 1,0 CV; Maschinengewicht ca. 210 kg; Abmessungen L800 × B800 × H1300 mm. Zubehör: Werkzeugschrank, Satz Wechselräder, Satz Bedienungsschlüssel. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automotive, Uhrmacherei, Werkzeugmaschinenbau, Luft- und Raumfahrt, Medizintechnik. Technische Daten ohne Gewähr
CONTROLS BALLIU WORKING RANGE -CUTTING MACHINE- laser capacity: 250 W X-axis travel: 3000 mm Y-axis travel: 1500 mm BALLIU MINOTAUR 4XL CO₂ laser cutting system Rofin DC 025 The system is equipped with a ROFIN-SINAR DC 025 CO₂ laser source (approx. 250 W) and was operated as a complete, functional production system. Ideally suited for laser cutting, laser processing, plastic processing, thin sheet metal, special machine construction or retrofit projects. Robust portal design, industry standard, made in Europe. Technical data – laser source • Laser manufacturer: ROFIN-SINAR Laser GmbH (Germany) • Type: DC 025 • Laser type: CO₂ laser, diffusion-cooled • Laser power: approx. 250 W • Cooling: water cooling • Laser weight: approx. 545 kg • Standards: CE / CDRH / DLR licence Scope of delivery -BALLIU MINOTAUR 4XL laser cutting system -ROFIN-SINAR DC 02 ...
Technical data Manufacturer: GRAULE Machine type: Notching cutter Version: Stationary machine with base cabinet Configuration Manually adjustable milling carriage Work table with stop and guide system Pneumatic workpiece clamping device Transparent protective screen Handwheels for positioning Electric motor with start/stop operation Remarks Type, year of manufacture and other technical data are not recognizable. Auction-ID: A7-49302-50
Technical Parameters Category: Used butchering machines Subcategory Mechanical processing of meat Type Frozen Meat Slicers / Guillotines Height 1750 mm Width 1100 mm Length 2550 mm Electrical Supply: 400V 50Hz 3N Main Material Stainless Steel, Acid Resistant Description Working width 500 mm
Robot Coupe R60 Vertical Cutter Mixer Stainless, 60L bowl capacity, three blade assembly, safety lid, variable speed, with timer, 3Ph
2 rotation speeds / Capacity 15 liters - Sold with tools for removing the blades - A pre-sharpened knife game Three-phase 400V power supply Revision carried out: - Bearings and shaft seals knives - Belt drive knives - Motor contactor / circuit breaker box replaced Auction-ID: A1-49314-301
250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-49495-17
Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-49495-400
45 cm cutters. Ideal for cutting wires, cords, cables and bolts. Auction-ID: A7-49495-98
Complete set of metal hole cutters hss, sizes 20- 25-30-35-40 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-49514-319
45 cm cutters. Ideal for cutting wires, cords, cables and bolts. Auction-ID: A7-49495-198
Set of bore hole cutters sizes from 18-30-32-35-55 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-49514-128
Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-49495-399
250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-49495-217
Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-49514-363
Set of bore hole cutters sizes from 18-30-32-35-55 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-49514-250
Complete set of metal hole cutters hss, sizes 20- 25-30-35-40 mm Overall dimensions: 200 x 100 x 100 mm Weight: 1 kg Auction-ID: A7-49514-369
Engine type: two-stroke, air-cooled, blade direction of rotation: left, oil/petrol mixture ratio: 1:25, disc cutting width: 255 mm, wire cutting width: 410 mm, maximum rpm: 8000 rpm, engine displacement: 42.7 cm³, fuel tank volume: 1000 ml, carburetor: diaphragm, guaranteed sound intensity level: 110 dB, Start: manual, never used Overall dimensions: 1200 x 400 x 400 mm Weight: 15 kg Auction-ID: A7-49514-362
Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-49495-83
45 cm cutters. Ideal for cutting wires, cords, cables and bolts. Auction-ID: A7-49495-298
Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-49495-183
Made from high-quality HSS steel, they are perfect for working with non-hardened steel, non-ferrous metals and wood, ideal for sanding welds, removing burrs, levelling surfaces or eliminating corrosion. Auction-ID: A7-49495-283
250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-49495-117
OKAY backpack petrol brush cutter BGE430N equipped with a 43 cc 2-stroke engine developing 1.25 kW. Back-mounted motor design to improve comfort when clearing, cutting tall grass, brushing and maintaining grounds. Set including the machine, back harness, transmission assembly and the bottle visible in the photos. Suitable solution for the maintenance of gardens, embankments, orchards, grounds and green spaces. Auction-ID: A1-48554-254
Colour display, air table refined, air conveyor tables 100 x 100 cm (l. + right), air corners (l. + right), 2 knives
Lot of 5 boxes of Ridgid Tubing cutters, 6 per box (104 5-24 mm) Total 30 pieces of Ridgid pipe cutters Auction-ID: A1-48529-84
Lot of 5 boxes of Ridgid Tubing cutters, 6 per box (104 5-24 mm) Total 30 pieces of Ridgid pipe cutters Auction-ID: A1-48529-86
Lot of 5 boxes of Ridgid Tubing cutters, 6 per box (104 5-24 mm) Total 30 pieces of Ridgid pipe cutters Auction-ID: A1-48529-85
Lot of 5 boxes of Ridgid Tubing cutters, 6 per box (104 5-24 mm) Total 30 pieces of Ridgid pipe cutters Auction-ID: A1-48529-87
Lot of 5 boxes of Ridgid Tubing cutters, 6 per box (104 5-24 mm) Total 30 pieces of Ridgid pipe cutters Auction-ID: A1-48529-88
IDEAL 1080 Lever Shears with Material Knife Cutting length 800 mm Year of construction 2016 Serial Number 1166252 Additional set of material knives with cutting rail
Automatic Cross Cutting Machine MOLEY-PORT® QS The portable sheeter in compact design. For cutting technical textiles. Tabletop model in a modern compact design for cutting small formats. Whether for precision cuts in production or for preparing residual rolls for recycling. ● Electrical equipment according to Euronorm EN 60204/1 ● Lightweight, stable construction (housing in high-strength aluminum construction) ● Working width: 20-500 mm - material guide infinitely adjustable ● Large clearance height for a wide variety of materials ● Flexible use; easy relocation; Easy to maintain ● Dimensions (without storage table and unwinding station): L 650 x W(D) 800 x H 550 mm - Weight: approx. 60 kg ● Electrical connection: 230 V- 50 Hz – 16 A
Chain milling machine on its own stand with various accessory components (b. Chains and Swords)
Universal tool and cutter grinder with worktable, dividing/indexing accessories and grinding head. Used workshop machine, condition as shown. Good lot for tool room, sharpening or refurbishment. Auction-ID: A1-49190-40
maximum number of results exceeded
please refine your search
50 € 
