water cutter used for sale

: ja weight: 1,8 t digital: ja Axis: 4 x-travel: 480 mm : 2500 Dimensions (L/W/H): 1600 x 1400 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I am selling an angle meat slicer Seydelmann AE 130. Year of manufacture 2004. UNGER 5 system Two cutting speeds, two feeding speeds Power 20 kW Machine in original condition, fully functional. Possibility of transportation and installation of the device by an external service company. Very good condition. Price negotiable.

Reference ID: PP-56192 Category: Guillotines Manufacturer: Wohlenberg Model: 155 Year: 2000 Max. size: 155 cm Condition: Good Location: Europe Availability: Immediately

Manufacturer: Bystronic Model: BySprint Fiber 3015 Year of Manufacture: 2013 4KW Hours in picture Find more here - .ucymachines/ Contact us at - sales@ucymachines

amount: 1 STK The tool shown in the illustration is a Sandvik Coromant T-Max Q-Cut head for grooving, identified more precisely by part number 570-40R 1513-09-50. Manufacturer: Sandvik Coromant Type: T-Max Q-Cut head for grooving (slotting) Connection: SL head (screw-mounted) - size 40 Hand: Right-hand Maximum cutting depth: 9 mm Coolant supply: Axial concentric inlet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 34 mm square edge steel: 30 x 30 mm L-beam: 100 x 10 mm flat steel: 100 x 14...160 x 11 mm blade length: 175 mm T-beam: 100 x 10 mm notching: l + T material: 10 mm hole punhing press: pressure: 45 t throat: 305 mm total power requirement: 3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,4 x 0,8 x 1,5 m 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch 2 foot switches contact limit stop various punching saddles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter Manufacturer: Mado Model: Supra 50 Capacity: 50 liters Bowl and bowl- cover are completely out of stainless steel Noise reduction cover Electric control cabinet integrated Variable knife speed up to 5000 rpm 2 bowl speeds 9/18 rpm Mixing speeds: forwards and reverse Knife head with 6 knives

In excellent condition, shaft drive.

Three knife trimer Horizon HT 30, well maintained and serviced, new PIN. In production ready condition with serial equipment and manuals.

- Program - Monitor - Air table - standard side table, left side - Resopal side table, right side - without jogger - Spare knife

amount: 1 STK Dimensions (HxWxD): 280 x 190 x 190 mm diameter: 60 mm -> Bestcut gear hobbing cutter with HSS cutting material - Chip angle < 8° -> Module 16 F.20° 1gg Lks -> BP IV D-Stg < 5°40 -> 5° 40 Sp Stg 00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Mazak Model: Super Turbo X510 MkII Year of Manufacture: 2007 Machine Type : Flatbed CO2 laser cutting machine CNC control: Mazatrol Preview Operating hours : 27.000 h Technical Specifications - Working area: 3050 x 1525 mm (5 ft x 10 ft) - X axis travel: 3235 mm - Y axis travel: 1545 mm - Z axis travel: 100 mm - Laser type: CO2 continuous wave - Laser power: 1800W - Maximum workpiece size: 3050 x 1525 x 22 mm - Maximum table load: 805 to 930 kg - Rapid traverse speed: 24 m/min (945 IPM) - Maximum cutting speed: 20 m/min - Machine weight: approximately 12,700 to 13,900 kg depending on configuration Maximum Cutting Thickness by Material - Mild steel: up to 22 mm - Stainless steel: up to 12 mm - Aluminium: up to 8 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

amount: 1 STK Dimensions (HxWxD): 300 x 190 x 190 mm diameter: 60 mm -> Gear hobbing cutter with HSS cutting material -> Module 18 -> L1 -> 5° 48` The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK Dimensions (HxWxD): 300 x 190 x 190 mm diameter: 60 mm -> Gear hobbing cutter with HSS cutting material -> Module 18 20°1 gg Lks. -> HSS-C 70.251VF The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK Dimensions (HxWxD): 280 x 190 x 190 mm diameter: 60 mm HSS hob for high wear resistance The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

amount: 1 STK Dimensions (HxWxD): 300 x 190 x 190 mm diameter: 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

suitable for tomatoes and other soft fruit and vegetable varieties, sawtooth-shaped cutting blades that move back and forth at high speeds, low cutting pressure, max. product dimensions: 100 x 70 mm, existing cutting set: 4.76 mm cutting thickness, WILLICH STORAGE.

Reference ID PP-57040 Category Guillotines Manufacturer Wohlenberg Model cut-tec 115 Year Built 2003 Color - Impression - Working Hours - Speed - - Max. size 115 cm Min. Size - Condition Good Location Europe Availability Immediately

AHI Grain Cutter Size 3, 600 mm roller length, Power 4 kw, rollers ø 147,4 Milled grinding segment Test run carried out in our specialist workshop

x-travel: 1200 mm y-travel: 300 mm z-travel: 420 mm Table dimensions: 360 x 1600 mm Year: 1992 : ja : ja spindle turning speed range: 32-1600 U/min vertical stroke: 300 mm total power requirement: 7,5 kW weight of the machine ca.: 3,400 t dimensions of the machine ca.: ca. 2,38 x 1,79 x 1,94 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used parts: Milling shaft / 2-speed gearbox SelectaTilth / Final drive: gears, chain, side cover, cork seal etc.

used Spewe mineral wool cutter, universal guide unit for many Possible applications, including the following equipment: - Short-stroke parallelogram - Telescopic cut-out post - Insulation thickness preset - Rear saw blade forced guide - Cutting guide swivels from -5 to +45 degrees - Without guide slide - Without insulation saw Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Cutting length: 1270/1100 mm Cutting depth at 90 degrees: 80 - 305 mm Cutting depth at 45 degrees: 180 mm Machine weight: 24 kg

Ruck Zuck Dough Cutter Cake Cutter/14 Wheels/Smooth/CorrugatedMaterial: Stainless SteelDesign: 14 Wheels: 7 Wheels Smooth and 7 Wheels Serrated The cutting width is flexibly adjustable and can be made fixed so that you always achieve the same cutting width. Wheel diameter: 5.5 cmCutting width: 1 - 12.5 cm See pictures for details

Dough and cake cutter 5-piece corrugated NEW! Dough and cake cutter in no timeSingle-sided, corrugated5-pieceVersatileDetails see picture

Ruck Zuck Dough Cutter Cake Cutter/10 Wheels/Smooth/CorrugatedProduct descriptionMaterial: Stainless SteelDesign: 10 Wheels: 5 Wheels Smooth and 5 Wheels Serrated The cutting width is flexibly adjustable and can be made fixed so that you always achieve the same cutting width. Wheel diameter: 5.5 cmCutting width: 1 - 12.5 cm See pictures for details

Dough and cake cutter 7-piece corrugated NEW! Dough and cake cutter in no timeSingle-sided, corrugated7-pieceVersatileSee picture for details

Dough and cake cutter 5-piece smooth NEW! Dough and cake cutter in no timeSingle-sided, smooth5-pieceVersatileDetails see picture

Dough and cake cutter 7-piece smooth NEW! Dough and cake cutter in no time at allSingle-sided, with smooth wheelsVersatile7-pieceDetails see picture

Dough / Pizza Cutter / Pizza Roller ( 2 pieces )made of stainless steel with plastic handle  ̧55mm total length 180mmeasy, smooth0.090grDetails see picture

Cross milling machine Bartezaghi 2BE 250 Spindle length 240 mm Maximum milling height 250 mm Spindle diameter 40 mm Spindle speed 5600 RPM 9kw motor Pneumatic material pressure Desktop control

Machine – Trumpf TC6000L - Manufacturer: Trumpf - Type: TC - Model: TC6000L 1300-3200W - Year of manufacture: 06/2002 - Operating hours: 109,870 h total / 76,477 h laser on - Laser power: 3,200 W - Punching force: 22 tons - Sheet thickness: Max. 8 mm - Workpiece weight: 200 kg - Control unit: Siemens Sinumerik 840D SheetMaster - Model: SM1606 V110 09 - Year of manufacture: 2003 Trumagrip - Year of manufacture: 2003 Find more here - .ucymachines/ Contact us at - sales@ucymachines

End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm -Weight: 29 kg

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, roller milling cutter, milling cutter, hob cutter, spline shaft hob cutter -Manufacturer: Fette/JAL, 23 hob cutters -Hole: Ø 16 mm 13 pieces, Ø 22 mm 4 pieces, Ø 27 mm 6 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 250/170/H90 mm -Total weight: 9.8 kg

Spline hobs, gear cutters, modular milling cutters, gear hobbing cutters, gear form cutters, modular milling heads, shell end mills, cylindrical milling cutters, milling cutters, hobs, spline hobs -Manufacturer: WMW PWS, 29 hob cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Different types: see photos, more pictures can be sent -Price: complete -Dimensions: 490/300/H70 mm -Total weight: 30.7 kg

End mill, milling cutter, shank thread milling cutter, thread cutter -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg

Slab cutter, paving stone cutter, stone cutter, paving stone cutter -for effortless cutting of slabs and paving stones to length through the translation of the eccentric lever -High stability with low weight -precise guidance of the cutting blades -Pendulum-mounted upper blade for cutting materials with a conical cross-section (curbstones) -max. for 6 cm stones -Weight: 10 kg

End mill, shank cutter, cutter, slot cutter, wood cutter -Two-knife cutter -Roughing-finishing end mill -4x: Milling cutter Ø 4 x 12 mm -7x: Milling cutter Ø 5 x 12 mm -10x: Milling cutter Ø 6 x 14 mm -1x: Milling cutter Ø 8 x 20 mm -5x: Milling cutter Ø 10 x 20 mm -4x: Milling cutter Ø 11 x 22 mm -3x: Milling cutter Ø 12 x 22 -Hole: Ø 10 mm -Type: M623 -Quantity: 34 pieces -Sale: only complete set -Weight: 3.6 kg

Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 67 mm -Milling height: 150 mm -Adjustment: SK50 -Manufacturer: WIDIA -4x milling cutter type: KRE80-301-10 -6x milling cutter type: KRE80-300-11 -2x milling cutter type: KRE80-301-20 -3x milling cutter type: KRE80-301-30 -Weight: 15 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outside saw blade: Ø 250 mm -Height: 4 mm -External cutter: Ø 237 mm -Height: 18 mm -Take: Ø 80 mm -1x: right -1x: left -Price: complete -Weight: 9.1 kg

End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg

Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Handover in current condition as seen -Condition see pictures -Manufacturer: Sandvik Coromant, face milling cutter head shell milling cutter Ø 113 mm -Type: R260.22-100Q32-12H -Intake: SK50 -Dimensions: Ø 113 x 225 mm -Weight: 5.5 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face mill -Manufacturer: Seco, Secodex Face milling cutter head without indexable inserts -Type: Secodex R220.13/23-8200-C -Mount: Ø 60 mm / Bolt circle Ø 100 x 18 mm Dimensions: Ø 210 x 60 mm -Weight: 8.2 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head -Type: Secodex R220.13/23-8315-C -Recording: SK50 -Dimensions: Ø 330 x 260 mm -Weight: 36 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, corner milling cutter -Type: M680 239.69.058 Ø160 -Number of teeth: 12, without indexable inserts -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160x 60 mm -Weight: 3.4 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, Secodex face milling cutter head shoulder milling cutter -Type: R290-160Q40-12M 848471 -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 160 x 60 mm -Weight: 3.9 kg

Pressing pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand pressing pliers, cable cutters, cable shears, hydraulic cable cutters -Manufacturer: VEB WMW, Hydraulic cable cutter with built-in hand pump -Type: PT 300 08 300 -Passage: 45 x 27 mm -Dimensions: 710/130/H115 mm -Weight: 9.7 kg

wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: LEUCO quick clamping system with wood cutter -Hole: Ø 35 x 75 mm -Saw blade: Leuco 250x4.0/2.8x100Z48 202062 -Number: 2x recordings available -Price: per piece -Total dimensions: Ø 250 x 90 mm -Weight: 12.5 kg/piece

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 3 pieces -Type: Mod.1,5 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 190/170/H120 mm -Total weight: 9.5 kg

Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hobs, stud hobs, 7 pieces -Type: Mod.1,75 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 350/190/H120 mm -Total weight: 22.2 kg