water cutter used for sale

Plasma Cutting Machine SAF nertaZIP 520 04808 - 2300 Cutting capacity: max 20 mm 3~ 220 / 380 V Cutting gun with 5 m cable Dimensions: 500 x 750 x 1000 mm

Milling cutter, H, schl. Zahnst. Group milling cutter FETTE K HSS E ( KHSSE ) Module 0.8 EW 20° DIN 3972 BP I

Tapping Device, Tapping Head GEFRIEBA MK3 for taps with square from 4 to 20 mm in wooden box used, tested ! Dimensions: 345 x 135 x 135 mm

Worm gear cutter KLINGENBERG Type A 6517 C01S HF.9.432 Bore Ø 32 mm New !' Dimensions: 70 x 70 x 60 mm

Worm Gear Cutter KLINGENBERG Type A 6519 C01S HF.9.432 Bore Ø 32 mm New !' Dimensions: 70 x 70 x 60 mm

Tapping Machine WMW, ABW GB2 MK 2 M3 - M8 with inserts Ø 2.5 / 3.5 / 4.0 / 4.5 / 5.5 / 6.0 mm used, tested ! Dimensions: 250 x 95 x 65 mm

Angle milling cutters, indexable insert milling cutters WIDAX, HEINLEIN, WIDIA 01-000546-002-2 274.274.06.119.00 diameter: Ø 242 mm 6 cutting edges with 6 holders each for inserts bore: Ø 31 mm (milling cutter side) / Ø 21 mm / Ø 40 mm (rear) flange (rear) Ø 90 mm groove width (rear) 16 mm, Depth 10 mm New ! Dimensions: 250 x 250 x 90 mm

Milling cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 160 ( 4x25x160 ) TGL 30-4113 MK4 shaft diameter: Ø 20 mm Tool holder: Ø 25 mm New ! Dimensions: 490 x 45 x 45 mm

Cutter mandrel , tool holder, with tightening thread WMW 4 x 25 x 80 ( 4x25x80 ) TGL 30-4113 MK4 shaft diameter: Ø 16 mm Tool holder: Ø 25 mm New ! Dimensions: 300 x 45 x 45 mm

One used guillotine Polar 115EMC MON year 1994 with monitor programming sidetabes chromed table

A used cutting machine Polar 92 E Year of manufacture 1996 Devices Air table Side Tables Display Program

Machine: Cut 25 line Manufacturer: Alpma Type: Cut 25 Year of manufacture: 2003 the Alpma Cut 25 line consists of: Alpma CUT 25 cutting machine Boekels piece scale Auto. Discharge for underweight pieces (cut or section) Auto. Discharge for overweight pieces (first cut or cut-off) Belt for 90° rotation of pieces Accumulation belt/intake belt for downstream form fill and seal machine The line was fully functional and had no defects. It was always maintained. the Boekels is installed on the right (after the CUT 25 cutting machine). Flow direction is from left to right. Documentation is available. Knife width 250mm Max. bar length approx. 800mm 120 cycles/min. A checkweighter is also still available if needed The line is dismantled and stored. If you are interested, you are welcome to inspect the line. Find more here - .ucymachines/

S. No.: 1504369 Cutting length: 800 mm Format: DIN A3 Cutting capacity: 20 sheets (paper weight 70g/m²) Table size: 605 x 800 mm (W x D) Professional lever cutting machine IDEAL 1080 with automatic safety. The IDEAL 1080 can cut formats up to DIN A3 and also DIN A2 crosswise with a cutting length of 800 mm. The maximum cutting capacity is approx. 20 sheets of 70 grams. The stepless back stop can be locked. The sheets of paper are securely fixed before the cutting process using a foot pressure. This creates precise cuts. In addition, a transparent, fixed blade guard made of shatter-proof plastic offers optimal safety. The durable blades are made of high-quality Solingen knife steel and can also be resharpened if necessary. GS tested!

Depth: . mm Width: . mm Height: . mm shelf for Sk50 shots The technical data is manufacturer or operator information and is therefore not binding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

Max. punching force: 700 kN Projection: 510 mm Cuts on flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat bar Support table on the punching side with stops Range of tools is included in the price Weight: 3,000 kg

Pillar lift for cutter cart Made of stainless steel Lifting weight: 250 kg Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

POLAR 137 ED AT 2000 Autotrim Program Air tables Polar lift Jogger RA Transomat

POLAR 176EMC 1993 Autotrim Air tables Polar lift Jogger RA Transomat

tool adaptor: . weight: . kg material: . Partly with tools 34 pieces The technical data is manufacturer or operator information and is therefore notbinding for us. We reserve the right to sell the goods prior to sale, our terms and conditions of business and sale apply exclusively. About us more than 400 of our own machines in stock over 12,000 m² of storage space, crane capacity 70 t more than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 30 mm square edge steel: 28 mm L-beam: 90 x 8 mm : 150 x 8 mm pressure: 35 t total power requirement: 2,8 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details - Manufacturer : Prima - Machine Type: RAPIDO --------------------------------------------------------------- Electrical Specifications - Nominal Voltage: - 3-Phase: 400V - 1-Phase: 230V - Nominal Current: - 3-Phase: 47A - 1-Phase: 27A - Frequency: 50 Hz - Short Circuit Current: 70 kA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tea biscuit cutter / pastry harp Dedy Year of manufacture not known Made entirely of stainless steel or aluminium, Dimensions: approx. 42 cm width, 50 cm depth and 10 cm height

round bar steel: 33 mm square edge steel: 30 mm L-beam: 60 x 8 mm hole diameter in sheet thickness: 20 in 13 mm hole punhing press: pressure: 35 t hole punching press: throat: 320 mm hole punching press: max. length of stroke: 24 mm hole punching press: capacity (dia. x thick.): 28 x 10 mm hole punching press: capacity (dia. x thick.): 23 x 12 mm total power requirement: 1,5 kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 1,5 x 0,7 x 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 32 mm square edge steel: 30 mm L-beam: 80 x 80 x 8 mm : 80 x 13 mm : 36 t throat: 170 mm work stroke: 28 mm work height max.: 980 mm material thickness: 28 x 13 mm hole diameter in sheet thickness: 25x10 / 30x8 mm total power requirement: kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,2 x 0,8 x 1,9 m Profile steel scissors with - 4 workstations - 1 foot trigger - hydr. drive - Support tables - Rectangular notcher - Hole punch including tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: 4JET Model: Pearl M Year of Manufacture: 2020 - Main Terminal: 400 VAC, 3P/N/PE, 50/60Hz, 63A Laser Specifications: - Laser Model: HyperRapid NX 50 - Wavelength: 1064 nm - Laser Output Max: 80 W - Pulse Energy Max: 1.5 mJ - Pulse Duration Min: 8 ps Application: - Pearl Cut Application: Laser Category 1 Hours 12992 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used TREIF FOX-CE meat chopper

Complete electronic boards(cards) for Schneider 115 mc v built 1990. Can ship world wide. Card numbers still available: 4141 APS-13010 MV40-5110 KV 40-30112APS-13210 MV 40-5020 4110 MV40-3040 MV40 - 30 20 MV40-3331 APS 13040-10 4131 4120 The mentioned cards were taken out of a fully operational cutter.

- Programm - air table - side table left and right - spare knife

Laksa KU130 Bowl cutter Stainless bowl cutter, 130L capacity bowl, six blade assembly, with discharge arm, mitsubishi touch screen hmi controls, modified to run on an AC motor with Allen Bradley Powerflex753 inverter drive, with manual, 3Ph

45 cycles per minute with chamfering 60 cycles per minute without chamfering Maximum cutting length 700 mm, width 400 mm

Multi-wire cutter with slat feed and chunk cutter 13 stones in NF format with three-sided chamfering. Batten length 1340 mm

Manufacturer: Trumpf Model: Trulaser 5060 Type of Machine: CO₂ Laser Cutting Machine Technical Specifications: Working Area: - X-axis: 6000 mm - Y-axis: 2000 mm - Z-axis: 115 mm Max. Workpiece Weight: 2800 kg Speed: - Axis-parallel: 200 m/min - Simultaneous (X and Y): approx. 300 m/min Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ±0.1 mm - Average position scatter: ±0.03 mm CNC Control: - Model: Siemens Sinumerik 840D - RAM: 64 MB - Monitor: 12 TFT - Program memory: 500 MB for NC programs - Disk Drive: 3.5 - OS Platform: Windows NT Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key Specifications - Maximum Sheet Size: 6160 x 2035 mm - X-Axis Travel: 6280 mm - Y-Axis Travel: 2070 mm - Z-Axis Travel: 130 mm - Maximum Sheet Weight on Table: 2400 kg - Table Changeover Time: 48 seconds - Maximum Positioning Speed (X-Y): 140 m/min - Repetitive Accuracy: ±0.025 mm - Positioning Accuracy: ±0.050 mm - Machine Dimensions (L x W x H): 17200 mm x 6300 mm x 3360 mm - Approximate Weight: 21500 kg​ Nitrogen! Find more here - .ucymachines/ Contact us at - sales@ucymachines

The MicroStep RS laser cutting machine is a high-performance fiber laser system designed for precision cutting of large-format materials. While specific details about the RS model are limited, it is likely part of MicroSteps MSF series, known for their modularity and adaptability to various industrial applications. --------------------------------------------------------------- Key Specifications - Working Area: Customizable; standard sizes range from 1,500 x 3,000 mm up to 2,500 x 12,000 mm. - Laser Power: Configurable from 1 kW up to 60 kW, depending on application needs. - Cutting Capabilities: - Mild Steel: Up to 25 mm thickness. - Stainless Steel & Aluminum: Up to 30 mm thickness. - Positioning Speed: Up to 180 m/min. - Repeatability: ±0.03 mm/m.​ Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used-refurbished machine max. 1800 cuts/minute 8-48mm product thickness 2mm cutting accuracy External dimensions (HxWxD): 850x850x1500 mm

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Sheeter for foil / sleeve Manufacturer: Sandmann Working range width = 16 -350 mm, Length = 10 -1000 mm, Speed up to 50 m/min 

Manufacturer: Kennametal Diameter: 500 mm Number of teeth: 62 Available quantity: 2 pcs.

Control: Heidenhain TNC 407 serial number: 60/1997 x-travel: 1.000 mm y-travel: 600 mm z-travel: 700 mm : TISCHMAß: 1300 X 600 mm : Werkzeugwechsler: 24- fac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SK150 Underused 1500 kg/h capacity -3ºC to -28ºC raw material temperature pneumatic product dispenser Electrical power: 4 kW Electrical connection: 400V, 3F, 50Hz Power consumption: 9,2 A S. air pressure: 4-6 bar Hydraulic pressure: 80 bar Oil capacity: 80 L Cutting force: 25.000 N Dimensions Depth: 1420 mm Width: 996 mm Height: 1635-1700 mm Weight: 580 kg

workpiece diameter: 110 mm grinding length: 410 mm clamping length: 20 mm total power requirement: 0,25 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m Profile Tool Grinder for Chamfer Angles, accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter Duker Rex Hydro 65 Made of stainless steel Distribution cabinet made of special steel, inside the machine Control box integrated in machine housing Noise-canceling cover Bowl capacity: 65 liters Electric power: 15kW Voltage: 380V / 50Hz 3 N/PE

conus taper: . mm tool adaptor: VDI 50 weight: . kg material: . 1 set of VDI 50 tool holders approx. 47 tools The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Food Tools CS4AAC round cake slicer Serial: 5253 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with three cutting inserts and spare blade, mobile

round bar steel: 30 mm square edge steel: 25 mm L-beam: 80 x 80 x 8 mm : 200 x 13 / 350 x 6 mm : 40 t throat: 175 mm work stroke: 32 mm work height max.: 980 mm hole diameter in sheet thickness: 20 x 15 / 38 x 8 mm total power requirement: 3,0 kW weight of the machine ca.: 0,62 t Dimensions (LxWxH): 1,0 x 0,8 x 1,3 0 Profile steel scissors with - 1 foot trigger - Support tables - Rectangular notcher - Hole punch including tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Food Tools CS1000CE Automatic round cake cutter Serial; 3190 This cake slicer is capable of cutting a variety of frozen round products including cheesecakes, layer cakes, ice cream cakes, pies and more. The machine is best for bakeries producing 200 or more products per hour

MULTI-PURPOSE CHOP SLICER, HOLAC, TYPE: 26/99 Technical description: Serial number: 290.012.03/1 Material: Stainless steel Power supply: 380-440 V / 50-60 Hz Power: 3,73 kW Dimensions: 2300 x 1050 x 1300 mm

Manufacturer: Tonello Model: Laser Blaze 250TN Year of Manufacture: 2011 aprox 1,4x1,4m garments, for denim fabrics Find more here - .ucymachines/ Contact us at - sales@ucymachines

2.2 KW