127,838 used machines on RESALE, but how to find them? Machine Search
New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...
New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...
New and unused Caffini Libellula 1-3 LB80 self-priming diaphragm pump. These slop pumps have been used since 1968. This successful pump type, also called cats head in practice, has remained virtually unchanged since that time. The pumps are suitable as a slurry pump or for small dewatering. This caffini libellula diaphragm pump is equipped with a Hatz diesel engine mounted in a mobile frame. Can be supplied with any desired coupling/connection. Max: 20 m³ per hour Max: 15 mWK 4 pcs. in stock If you have any questions, you can of course always contact us., , Throughput capacity: 20 m3/h, Max dirt passage: 50 mm, Motor brand: Hatz, Max. head: 15 MWK, Weight: 150 kg, , = More information =, , Year of manufacture: 2025, Colour: Blue, Applicable material: Water, Empty weight: 150 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On reques ...
BBA MP 50 Vacuum pump this MP series pump with air treatment capacities of 50 m3/h. He is, designed with a clear focus on reliability, efficiency and durability., Pump specifications:, Type.MP50 Diaphragm pump, max. air capacity.100 m3, /h (59 CFM), max. vacuum..8.5 m (29 inHg), Diaphragm/valves...Rubber, , Throughput capacity: 100 m3/h, , = More information =, , Year of manufacture: 2023, Cargo space capacity: 1.667 l, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just ...
LEO high pressure petrol driven pump 4-stroke, Suitable for clear or slightly polluted water for irrigation, transferring water into swimming pools., , Max yield: 20 m3, Max pressure: 80 mwk, , If you have any questions, please call us., , Throughput capacity: 20 m3/h, Max dirt passage: 3600 rpm, Weight: 22 kg, , = More information =, , Year of manufacture: 2024, Applicable material: Water, Empty weight: 22 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order ...
BA150KS Dirty Water Pump – Powerful, Reliable and Quiet, The BA150KS is the solution for pumping contaminated water. This 6-inch mobile dirty water pump is designed to handle tough challenges and offers excellent performance, combined with user-friendliness and environmental friendliness., Why choose the BA150KS?, • Powerful performance: Pump capacity up to 490 m³/hour with a dirt passage of up to 100 mm. Perfect for pumping water with large dirt particles., • High efficiency: The high pump efficiency and the adjustable wear plate with cutting grooves ensure low operating costs and a long service life., • Ready for immediate use: Thanks to the innovative MP vacuum system, the pump sucks in quickly and reliably, even from dry conditions., , Powered by an economical and environmentally friendly Hatz diesel engine, the variable speed control ensures low fuel consumption and minimal ...
An EAS water jet cutting system for the food industry, especially for bread, cakes and pizza, is available. 1) High-pressure unit for water hydraulics Power Pack 11kW Hygienic Design, max. pressure: 3200bar, max. flow rate: 1.7l/min, motor power: 11kW, pump: Hammelmann HDP 24, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1450mm, weight: approx. 365kg, control: Siemens Simatic S7. 2) Aquatil food cutting machine, max. pressure: 3200bar, max. delivery rate: 1.7l/min, cutting speed: 18m/min, max. table load: 45kg, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1650mm, weight: approx. 265kg, control: EAS(Y)-Touch. Documentation available. On-site inspection is possible.
A Hyfra water recooler is available. Cooling capacity: 5.15kW, max. ambient temperature: 37°C, max. operating overpressure: 29.5bar, refrigerant: R 407c, refrigerant capacity: 2kg, machine dimensions X/Y/Z: approx. 900mm/800mm/1400mm, empty weight: approx. 180kg. Documentation available. On-site inspection is possible.
INTERMAC PRIMUS 184 3D waterjet cutting machine was built in 2022 in Italy. This extremely powerful machine is designed for precise 3D machining of any type of glass. The process is performed by a 5-axis cutting head, which offers unlimited machining capabilities. It allows, among others, the cutting of complex patterns and the cutting of holes of any size with extreme ease. In order to guarantee excellent stability during even the most intensive challenges, the machine design is made of stress-relieved stainless steel. The movement of the X and Y axes is performed on hardened and ground tooth guides of high precision. On the other hand, the Z-axis moves via a prismatic recirculating ball screw. All the table’s travel components are protected by leak-proof covers. The offered PRIMUS 184 WaterJet also features an extensive equipment, which includes e.g. intuitive CAD/CAM software, ...
Complete sample system for a water production plant to do 3.000 cycles per hour. Including Blow Molding Machine (with 4-cavity blow molding machine, air compressor, air dryer group, chiller, blow mould), Bottle Feeding Table, Automatic Rinsing/Filling/Capping Machine, Cap Feeding Machine, Lamp Inspection Box, Drying Device, Automatic Label Shrinker Machine, Code Spraying Machine, Automatic Wrapping Machine, Conveyor System. Way of production: Bottle blowing > bottle rinsing > bottle filling > bottle capping > lamp inspection > labelling > thermo shrinking > code spraying > wrapping. - Specifications: 3000 cycles/h (at 500ml) | bottle volume: 350-1500ml | PET bottles | standard 28/30mm PET caps | 1500 liter of water filling /hour | 500 liter of water for rinsing per hour, gravity filliing, 24 bottles in a multipack. - Specification depending on final layout and customized combination of m ...
Automatic water filling system for up to 18.000 bottles per hour. - Including feeding system for empty bottles to the 40-head rotary rinser. - Rotary filling station (40 heads) with gravity filling principle. The capping unit is working with 12 capping heads and is suitable for 28 and 30mm PE standard caps. - All product contacting parts are made of SS304 or standard food package plastic. - The frame is made of high quality carbon steel Q235 (optional SS304). - MITSUBISHI PLC, WEINVIEW Touchscreen, Specifications: productivity 6.000-18.000 bottles per hour, number of rinsing heads: 40, number of filling heads: 40, 12 capping heads, bottle volume: 350-2000ml, bottle diameter: 50-90mm, bottle height: 150-310mm, filling tolerance: +/- 2%, compressed air: 0.5m?/6bar, filling water: 9m?/h, rinsing water: 3m?/h, power: 380V, 7.5kW, machine dimensions: L4300xW3400xH3050mm, 12.000kg. Please note ...
Automatic water filling system for up to 4.000 bottles per hour. Including feeding system for empty bottles to the 18-head rotary rinser. Rotary filling station (12 heads) with gravity filling principle. The capping unit is working with 6 capping heads and is suitable for 28 and 30mm PE standard caps. All product contacting parts are made of SS304 or standard food package plastic. The frame is made of high quality carbon steel Q235 (optional SS304). MITSUBISHI PLC, WEINVIEW Touchscreen. - Specifications: max. speed of the machine in neutral: 66 cycles/minute | number of rinsing heads: 18, number of filling heads: 12, 6 capping heads | bottle volume: 350-2000ml | bottle diameter: 50-90mm | bottle height: 150-310mm | filling tolerance: +/- 2% | compressed air: 0.5m?/6bar | filling water: 1.5m?/h | rinsing water: 0.5m?/h | power: 380V, 3.5kW | machine dimensions: L2700xW1600xH2800mm | weigh ...
70 litre, Stock number: T2235, Litre: 70, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Waterbath, Standing: On leg stand, Top: Open, Inner diameter: Ø 550 mm., Total height: 970 mm., Other: Detachable rings on top
VIBRATING SCREN - best solution for liquids and powders, Dynamic three-dimensional vibrations., The vibratory motion of the screen spans both horizontal and vertical directions, providing the flexibility of adjustment in both axes., Minimal installation requirements., No vibration transmission from the upper section to the base, Possible addition of wheels to the base., Quick disassembly for cleaning or mesh replacement., Each screen supports the installation of 1 to 4 separation stages, yielding 2 to 5 distinct product fractions., Constructed in carbon steel or stainless steel., All parts in contact with material are on AISI 304 stainless steel Fully compliant with CE regulations most required screen diameter from 400 mm up to 2.200 mm to cover all needs, self cleaning system,, Just ask for your own vibrating screen by listing the following specs:, - material, - process, - size of good ...
GAMMA MECCANICA WATER RING PELLETIZER, Model TDA 6, stainlesse steel housing and all parts in contact with water, star blade holder for 4 knives, throughput rate 2,0 Tons/h depending on materials and feeding rate, constructed in 2013, complete with stainless steel drying centrifugeù, screen basket in stainless steel, control panel, photos taken before reconditioning, the machine is offered totally reconditioned, capacity: 2.500 kg/h
Previero underwater head cutting system, complete and ready to work on plastic extrusion lines. Brand: Previero For extruder: Ø 130 mm Underwater cutting in stainless steel Main engine: 3 hp (2.2 kW) With 2 water pumps: 2 HP (1.5 kW) each Centrifuge: 1.30 m x Ø 350 mm Centrifugal motor: 5.5 hp (4 kW)
For sale: B100-S2 Dry Self-Priming High-Pressure Diesel Engine Pump, The powerful, compact and versatile solution for all your pumping work., , ✓ Ready for immediate use | ✓ Robust & reliable | ✓ High capacity & delivery head, , Are you looking for a powerful, self-priming diesel engine pump that effortlessly moves large quantities of water and is also suitable for a wide range of applications? The B100-S2 is exactly what you need., , Technical specifications, Type: B100-S2, , Pump type: Dry self-priming high-pressure diesel pump, , Capacity: Up to 120 m³/hour (see pump curve), , Delivery head: Max. 70 meters (see pump curve), , Engine: Hatz diesel engine, 39 kW at 2900 rpm, , Fuel tank: 300 liters (max. 30 hours at full load), , Fuel consumption: Approx. 10 litres/hour, , Connections: 4” flange (pressure & suction), , Dirt passage: 29 mm, , Dimensions (LxWxH): 2520 x 1200 x 181 ...
Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available
A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.
Blobel Spill Barrier can be rotated on one side The ideal solution if you want to secure the area of a lifting platform or dock leveller. The barrier is stationary and can be rotated on one side, easy to handle, versatile and flexibly convertible from manual to automatic. The rotating and clamping device is permanently mounted next to the opening to be secured and sealed against the structure. The locking body is screwed into the swivel joint and stands vertically next to the opening in the resting position. It is secured against unintentional folding down in accordance with the UVV. In the event of an emergency, the fuse is unlocked, the leak lock is folded down and locked in the clamping device. The contact pressure of the clamping lever is adjustable, ensuring a secure seal. In the basic version, the barrier body is folded down manually, and an automatic system can be ...
Inv. Num. : 8516 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Software: Apser 3.5 - Basic Module Operating hours: 37500 h Work table length: 3000 mm Work table width: 2000 mm High Pressure Pump: Hypertherm 50 OEM (4100 bar) Cutting head: Allfi AMS
Water Distillation Plant Manufacturer Stilmas Type MS 10 4 S Serial No. 4285/90 Capacity 120 -220 lt/h Temperature 143-175 °C Steam 36-75 kg/h Pressure of 3-8 bar Documents available
This Eisele Waterpump BSD442, Can be used for the emptying and cleaning of pits, ponds, mine shafts and similar tasks,, for reducing ground water, pumping out water ballast from ships, on building sites, in, stone and gravel quarries and building material works., For municipalities and industrial concerns., , Throughput capacity: 100 m3/h, Max dirt passage: 19 mm, Max. head: 6 MWK, Max dirt passage: 1750 rpm, Weight: 1600 kg, , = More information =, , Year of manufacture: 1999, Applicable material: Water, Empty weight: 1.400 kg, Connector size: 4 inch, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.n ...
Dry-priming high-pressure pump with a diesel engine and a discharge pressure of 14 bar. Thanks to its 55 kW motor power, this high-pressure pump achieves a capacity of 145 m³ per hour. The pump is equipped with a bronze impeller. This makes it an excellent choice as a booster pump, irrigation pump, or high-pressure pump for pressure testing storage tanks during tank testing. The pump, with its diesel engine and vacuum system, is mounted in a sound-dampened enclosure. This limits noise pollution to the surrounding area., The diesel high-pressure pump is often used in industry as a booster pump or pressure pump for tank testing and cooling water applications. As a booster pump, the high-pressure pump is installed behind a larger pump to pump the output with more pressure. This provides greater pressure, for example, to cover longer distances. Specifications, , Discharge Connection () • ...
Cooling unit water recooling unit DALEX type DRF 2Masch. No. 38913719 year of construction 1989Volume flow 0.35 m3/hCooling capacity 1950 wattsOperating pressure 2 to 3 barRefrigerant R 134a Device has been converted from R12 to R134aOperating overpressure 18 barPipe connection thread 3/4? Tank volume 600 x 400 x 350 mm = approx. 80 litresMains connection 380 volts, 50 HzSpace required L x W x H 900 x 800 x 1020 mmWeight 100 kgGood condition; used
This self-priming 12-inch emergency pump is designed for rapid deployment in high or low water emergencies. Unique to this B300 is the tractor drive (PTO)., -Max capacity 1500 m3/h. , -Max delivery height 25 mwk., -Max dirt passage 70 mm., , Comes with 2 trailers (slow traffic / no license plate) filled with piping, for suction and discharge of the pump, , AHW1 ), 2x suction/discharge hose 12, length 4 meters, 1x suction basket 12, 1x 90° bend 12, 1x 45° bend 12, 9x drain pipe ‘lightweight’ 12, length 4 meters, , AHW 2 ), 2x suction/pressure hose 12, length 4 meters, 1x suction basket 12, 1x 90° elbow 12, 1x 45° elbow 12, 9x drain pipe ‘lightweight’ 12, length 4 meters, , Can be transported in one go, pump can be connected to the trailers, trailers can be connected together , , Very good condition!, , Throughput capacity: 1500 m3/h, Max dirt passage: 70 mm, Max. head: 25 MWK, ...
GLOVE'S WATER TIGHT TEST MACHINE MANDRELS : 80 (40 LEFT T5863094 AND 40 RIGHT) TRANSPARENT T5863094 seller offer No. resale 167424183
P445 - used approx. 35 m³ / 35,000 L polyester tank, GF-UP tank, Staffelstein tank, standing on flat bottom. Technical details: Content: approx. 35 m³ / 35,000 litres Material: Polyester / GF-UP Manufacturer: Staffelstein Theodor Vanck Dimensions: approx. Ø 3.00 m × H Tank 5.20 m / H total 5.70 m Other: Used polyester tank, professionally cleaned and in good condition. Vertical GF-UP storage tank on flat bottom, dome on top of the roof, several inlets and outlets. Former salt brine tank. Roof was repainted. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, etc., or as a rainwater collection tank. Price on request. Transport can be organised at a reasonable price. It is not possible to update all of our listings on a daily b ...
1,000 litre water tank/ storage tank made of V2A Properties: Volume 1000 L Material V2A (AISI 304) 1.4301 Total height 2000 mm Cylinder height 1100 mm Diameter 1000 mm Weight 170 kg Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground
P463 - used approx. 35 m³ / 35,000 L polyester tank, GRP tank, Erka tank, standing on flat bottom. Technical details: Content: approx. 35 m³ / 35,000 litres Material: Polyester / GRP Manufacturer: Erka Specific gravity: min. 1.35 kg/L Dimensions: approx. Ø 3.00 m × H Tank 5.20 m / H total 5.70 m Other: Used polyester tank, cleaned and in good condition, completely repainted. Standing GRP storage tank on flat floor, dome on top of the roof, several inlets and outlets. Former calcium chloride tank. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, etc., or as a rainwater collection tank. Price on request. Transport can be organised at a reasonable price. It is not possible to update all of our listings on a daily basis. As o ...
1000KW Cooling Power Sale without guarantee, as is, where is. For more information please sent inquiry
Overhead cut to the water - For extruder Ø 120 mm - Brand: PRT -Production. 500 to 700 kg/h - With stainless steel centrifuge - With electrical panel
Drycooler Carrier -Type: 3MSD EC M2 SH -Cooling capacity: 180 kW -External dimensions: 6400 x 950 x 1350 mm -Number of fans: 3 x 900 mm -RPM: 610 -Year of manufacture: 2016 -With Wilo circulation pumps -External dimensions of pumps: 1800 x 500 x 1150 mm -Quantity in stock: 1 -Condition: Used, In good working condition, ready to work
MAVIJET MJT-W53D 4020 CNC waterjet cutting machine was built in 2020 in Turkey by MAVİFORM METAL MAKİNA SAN.TİC.LTD.ŞTİ. The machine, equipped with a 5-axis cutting head, offers unlimited machining of a wide range of materials, i.e. metal, plastics and glass. Machining is performed with innovative water jet cutting technology, which guarantees perfectly smooth edges without the need for further finishing operations. During cutting, only natural abrasive and water are used, making the process free of harmful fumes and safe for the environment. The offer also includes a comprehensive range of equipment, consisting of, among others, an advanced control system, a 40 kW high-pressure pump and an abrasive tank. MJT-W53D 4020 WaterJet with empty tank weighs 4560 kg. Technical specifications of the MAVIJET MJT-W53D 4020 water cutting machine - CNC controller: ESA - number of axes: 5 ...
Loos International Weishaupt Brenner 1700 L Volume 1500-1630 KW 6 Bar 110 Degree Temp. Year of construction 2003
Waterjet machine Flow Incl. new maintenance kit pump incl. documentation Year of Make: 2006 Manufacturer: FLOW Europe GmbH Manufactured Date: 11/05 Working area: (L x W x H): 3600 x 2000 mm Continuous working pressure: 3,800 bar High Pressure Pump: FLOW – Hyplex Pump Model HyPlex 50 Hours: 4342 hours Maintenance intervals: Regular according to maintenance schedule Last service at: 4102 hours (major pump maintenance) Software: Flow-Master PC Software Flow PATH Module, Version 6.0 Flow CUT Module, Version 6.0 Flow Master 6.0 Professional (FlowNest) Hardware clamping and clamping device, Flow, set-up and positioning aids with laser pointer, Devices 1x Sand Silo 1x Sand mixer unit Flow 1x Water Softening (WTS) 1x collision sensor defective Documentation package, Various spare parts, all pre-pipes and cables
Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food
Volume 16300 L Material V2A Horizontal design Isolated design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet
Volume 16300 L Material V2A Isolated design Horizontal design Cylinder length 4400 mm Cylinder height 2950 mm Width 2600 mm Surface coated inside food-safe Surface inside 2B=IIIC ground Number of feet 2 saddle feet Last Use Food Description Tank crest: Cone base 2 crane eyes Overflow pipe 150 mm Filling tube 200 mm Manhole Ø 400 mm in the tank apex 1x Ventilator 200 mm 2x CIP ball completely insulated Front: Level sensor at the top Bottom level sensor Subsoil: with forward-drawn drain pipe with flap valve 200 mm 2 saddle feet
HDPE drain pipes 110 x 5.3 mm with a length of 6 meters Equipped with M and V part perrot/cardan mounted with heavy clamp, 60 pieces. sale without tubes container/pallet,, , = More information =, , Year of construction: 2023, , = More information =, , Year of manufacture: 2023, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just like to discuss what would be useful in your situation? , Dont keep worrying about it, just give us a call., We are available Monday through Frid ...
Ice water system Langheinz L 130 with ice bank: 30 kg Water connection: 1/2" Weight empty / operating approx.: 65kg / 160kg Energy consumption at 100 litres: 1.5 - 2.5 KWh Connection 220V Used device cleaned with warranty Option: Maintenance contract Delivery Instruction & Commissioning
Capacity: 10m3 Dimension: 2,000mm x 3,300mm (H) Material: Glass tissue, ve resin, chop strand mat continous roving women roving. Type: Cylindrical (Flat base and flat close) PIC Commercial: Amelia TGresellertopglove.com.my Technical: Aisyah +60 19-383 9291
Rehsler TW HL4006D Refrigeration System Voltage: 400 V Rated power: 11 kW Current consumption: 18 A Degree of protection: IP54 Ab. Operating pressure: 10 bar Minimum ambient temperature: 5º C Maximum ambient temperature: 43º C More items - new and used - can be found in our shop! International shipping costs on request!
A water jet cutting system Expert Systemtechnik with a high-pressure pump BFT is available. 1) Cutting system Expert Systemtechnik cutEXPERT variojet, year of manufacture: 2020, product: leather/foam materials/technical textiles/rubber materials/composite materials/packaging material, max. cutting speed: 70m/min, repeat accuracy: +/-0.2mm, water consumption: approx. 0.2l/min, cutting dimensions X/Y: 1800mm/3000mm. 2) High-pressure unit BFT Servotron 40.45+, year of manufacture: 2020, drive power: 45kW, max. flow rate: 4.6l/min, design pressure: 4200bar, max. operating pressure: 4000bar. Machine dimensions X/Y/Z: approx. 2000mm/1000mm/1400mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible.
SIDEL SBO10- blowing machine, SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity., As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper., After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine:, which consists of:, 1. Preform infeed rails, 2. Preform infeed wheel, 3. Infrared oven, 4. Preform transfer wheel, 5. Blow wheel, 6. Bottle transfer wheel, 7. Bottle evacuation, GENERAL Presentation, 1. Infeed of cold preforms, Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowere ...
maximum number of results exceeded
please refine your search
