water chiller 50 used for sale

Voltage 400 V, freezing capacity 4.56 kW, capacity up to 180 kg, refrigerant R404 A, incl. FRIGO SYSTEM RKNQK1008CS/LS cooling unit (1400x800x950 mm) Auction-ID: A7-45702-5

Freezing capacity 4.56 kW, capacity 180 kg, refrigerant R404A, incl. cooling unit (1200x800x1050 mm) Auction-ID: A7-45702-4

CHILLER ✔️ Brand: Carrier ✔️ Model: 30XA ✔️ Year: 2012 ✔️ Fluid: R134a ✔️ Load: ~134 kg ⚙️ Key features: Power consumption: ≈ 312 kW Max amperage: ≈ 522 A Power supply: 400V – Three-phase – 50 Hz Weight: ≈ 6723 kg

Aircooled chiller KKT cBoxX 90 83 KW Cooling capacity: 83 kW / 23.6 tons (tw2=20°C / tu=32°C ) Year of manufacture: 2021 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSH161A4ALD (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos ML90HA-J-H3-CML2A + 1 pcs. Grundfos ML132DA-J-H3-CML4A, buffer tank (open-type). Dimensions: 1.84x0.83x2.03 m. Weight: 1230 kg. Working hours: 1/1 h. Condition: New

Aircooled chiller CARRIER 30RBS 160A0234 PE 156 KW Cooling capacity: 156 kW / 44.36 tons (12/7 — 35°C) Year of manufacture: 2014 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. Copeland ZP182KQE-TFD-604 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. Hydraulic module: 2 pcs. water pump GRUNDFOS AC30-142, expansion vessel. Dimensions: 2.05x2.26x1.33 m. Weight: 945 kg. Working hours: 3421/3417/5172/4684 h. Condition: Good

Chiller GWK Weco 48 RZ, year 2005, S/N 211486-01-01, 25.11 kW, nominal cooling capacity 47 kW

Chiller 2x CARRIER 30RW-245-A0026-PEE-- year 04/02/2010, S/N 12B001197, S/N 12B001196, 38 kg R407C, weight 1,471 kg, internal NSHV 6Q4, refrigeration machine 1+2, with various heat exchangers, overflow vessels, pipelines, controls, actuators etc., volume without heating accessories

Chiller TAE Evo M03 2011, S/N 2200190433, Refrigerant R134A

Aircooled chiller AERMEC NRB2200X A BI 634 KW Cooling capacity: 634 kW / 180.27 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 3 pcs. COPELAND ZP725KCE-FWMN-502 (scroll) + 1 pcs. COPELAND ZP485KCE-TWD-522 (scroll) Type of refrigerant: R410а Number of fans: 10 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump LOWARA FTCE 100 200/185/D, 2 pcs. expansion vessel, buffer tank. Dimensions: 5.95x2.2x2.45 m. Weight: 4230 kg. Working hours: 4296/4296/5493/5493 h. Condition: Good

M.T.A.A ARIES TECH 2 105 HE, R410a New model year 2025:, 338 kW effective cooling capacity,, water inlet/outlet 20°/15°C, Ambient temperature +35°C, 4 hermetic scroll compressors and 2 refrigeration circuits, 4 condensers consisting of copper tubes and aluminium fins (NOT micro-channel), Shell-and-tube evaporator, Evaporator anti-freeze heater, -20°C ambient temperature kit option, Electrical panel heater, Brushless EC fans, availability: in stock, capacity: 338 kW cooling capacity, conditions: new machine, type: chilling unit

M.T.A. ARIES G 075 HE, Green R454B refrigerant, 227 kW effective output, Water IN/OUT 13°/7°C, Ambient temperature +35°C, 4 hermetic scroll compressors and 2 refrigeration circuits, Green R454B refrigerant, Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750, 4 condensers consisting of copper tubes and aluminium fins, NOT microchannels, Shell-and-tube evaporator, Evaporator anti-freeze heater, -20°C ambient temperature kit as option, Electrical panel heater, Brushless EC fans, availability: in stock, capacity: 227 kW cooling capacity, conditions: new machine, type: chilling unit

M.T.A.ARIES G 065 HE - new machine, Green R454b refrigerant, 150.000/200,000 BTU (174 / 232 kW), 198 kW effective output, Water IN/OUT 20°/15°C, Ambient temperature +35°C, Green R454B refrigerant, -- Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750 --, Shell-and-tube evaporator, 500-litre storage tank, P3 pump, Constructor Description:, The Aries G series liquid chillers are air-cooled units designed for outdoor use (electrical control panel protection rating IP54). All units are designed, manufactured and tested in accordance with ISO 9001 standards. The design of this range has focused on achieving full-load and seasonal efficiency ratings that meet the limits imposed by eco-compatible design regulations (ErP Tier 2 Compliant) for SEER and SEPR HT ratings, whil ...

Aircooled chiller CLIMAVENETA NX2 G06 0082 69 kW Cooling capacity: 69 kW / 19.62 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Bitzer GSD60154VLB4-2 (scroll) Type of refrigerant: R454B Number of fans: 6 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos MGE90LC1-56C-IA-220 (Frequency inverter) Dimensions: 2.43x1.18x2.1 m. Weight: 780 kg. Working hours: 55/55 h. Condition: Outlet

Watercooled chiller/Heat pump Climaveneta NX W H 0182 55.9 kW/62.8 kW Cooling capacity: 55.9 kW / 15.89 tons (12/7 — 35°C) Heating capacity: 62.8 kW / 17.86 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 1 pcs. Copeland ZP122KCE-TFD-418 (scroll) + 1 pcs. Copeland ZP104KCE-TFD-418 (scroll) Type of refrigerant: R410a Dimensions: 1.22x0.88x1.62 m Weight: 390 kg Working hours: 39/48 h. Condition: Outlet

R410A refrigerant Quantity 6.3 kg Power 14 kw DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-22

Cooling power 29.3 kw Refrigerant temperature -10 / 85 Refrigerant R407C Quantity 9.2 kg DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-18

Aircooled chiller YORK YLCA-60 60,1 kW Cooling capacity: 60,1 kW / 17,1 tons (12/7 — 35°C) Year of manufacture: 2013 Refrigerant circuit: 1 pcs. Type of refrigerant: R410A Compressors: 2 pcs Copeland (scroll) Heat exchanger: Plate Hydraulic module: 1 pcs. water pump (Salmson), buffer tank, expansion vessel Dimensions: 2,15 x 1,17 x 1,58 m Weight: 611 kg Condition: Good Working hours: 21100/19300 h.

Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New

Two water-cooled chillers of the same size 6°C/12°C each 500-1300 KW cooling capacity, stored in their original packaging in a dry hall. No longer installed due to project stop. Original price 130.000 €

Aircooled chiller Climaveneta NX K 0202P 52 kW Cooling capacity: 52 kW / 14.79 tons (12/7 — 35°C) Year of manufacture: 2018 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Copeland ZP112KCE-TFD-455 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump EBARA DWC-V 300/1, expansion vessel, buffer tank 90 l. Dimensions: 1.8x1.2x1.9 m. Weight: 740 kg. Working hours: 49/49 h. Condition: Outlet

Aircooled chiller CLIMAVENETA FX G04 A 0751 112 kW Cooling capacity: 112 kW / 31.85 tons (12/7 — 35°C) Year of manufacture: 2018 Options: KIP Link Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSC7973-70Y-40P (screw) Type of refrigerant: R1234ze(e) Number of fans: 2 pcs. (EC-fans) Dimensions: 2.3x1.6x2.5 m. Weight: 1800 kg. Working hours: 0 h. Condition: New

Aircooled chiller/Heat pump YORK YMPA0160PE50 159 kW/160 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 160 kW / 45.5 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 3 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll, inverter) Type of refrigerant: R410a Number of fans: 3 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2071 kg. Working hours: 0/0/0/0/0 h. Condition: New

Lightbox, single-sided HINRICHS FOTOFACTORY 500 x 500 mm ( 500x500mm ) max. foil size: 480 x 480 mm 230 V AC 50 Hz 32 W used, aluminium housing, tested ! Dimensions: 500 x 85 x 500 mm

Strip cylinder NORGREN M/446040/M/500 stroke 500 mm piston diameter Ø 40 mm 10 bar used ! Dimensions: 800 x 75 x 90 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Straightening Plate, Spotting Plate PAGUS Work surface: 500 x 500 mm height: 120 mm used ! Dimensions: 500 x 500 x 120 mm

Welding Table, Straightening Table, Straightening Plate, Work Table, Clamping Table Worktop, Straightening Plate, Measuring Plate,Spotting Plate PAGUS Work surface: 500 x 500 mm Height: 40 mm used, tested ! Dimensions: 520 x 500 x 40 mm

Ultra Long Lens, F = 2.2 - 3.0 f = 80 - 144mm, Throw distance Ratio = 3.9 - 7.3:1, Zoom = 1.8 Auction-ID: A7-46311-48

max height 420mm; min height 195mm; 5635 Auction-ID: A1-45902-323

Auction-ID: A7-46417-214

max height 420mm; min height 195mm; 5635 Auction-ID: A1-45902-322

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Net cooling capacity: 50 kW Operating Weight:435kg Refrigerant: R410a

Ultrapure water treatment, EDI SNOWPURE / ELECTROPURE / EDWARDS EDI XLBOC-500 YL3201003 used, tested ! Dimensions: 570 x 420 x 220 mm

50,000 litre underground tank - brand new - according to DIN-EN 12285-1, single-walled, raw inside, professional insulation on the outside. Dimensions: D = 2.50 m - L = approx. 10.70 m The tank has a DN 600 manhole with dome cover, screws and seal. Containers from the factory, freely charged. On request, the tank can be completely equipped with a fire water suction connection, the tank then meets the requirements of DIN 14230 - underground fire water tanks: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction pipe DN125 made of stainless steel - V2A, with Storz A fixed coupling and Storz A blind coupling, - 1 pcs DN100 vent pipe with stainless steel hood - V2A, - 1 piece anti-vortex plate mounted on suction line, - 1 sign "Extinguishing water extraction point", - 1 pc. soun ...

Kat-No 06-1101-3 New TOP quality at an affordable price, best stainless steel according to DIN, Welds minimal, stable feet Standard: Material V2A, 1.4301 according to DIN 17440, inside 3IIId=2B, exterior marbled Completely stained, passivated and neutralized "Remaining outlet DN 50 •Fill level indicator with bar and scale "Swimming lid complete with accessories •Ventilation and vent valve "Air pump Transport hook for lid on/off •Stand feet 3x 6: 720 mm Height Zyl: 1250 mm Total height: 1660 mm Supplements (please ask): Bracket for stairs, tapping tube for tap flap Gr.37 with disc valve NW 40=clear drain, disc valve DN 50, gallows, tap flap Gr.37, tasting valve. The price is for a tank. For further information: Tel: 09353 909050 or Fax: 09353 9090522 Mobile: 0171 6518248 Available in other tank sizes: 300,500,600,800,1000,1 ...

Kat-No 09-1017 New Mash tanks made of V2A with agitator and cooling jacket with 4 x feet, very stable version • with manhole front DN 430 x 310 mm • with residual outlet DN 90 mm (DIN 11851) • with threaded connection connector DN 95 mm top floor "with stable agitator with 5 paddles refurbished • with cooling jacket with 2 x cooling zones - OBEN: 750 mm wide - UNTEN: 500 mm wide • with 2 x transport eyelets • with tap flap DN 37 mm Dimensions: Diameter Zyl:1600 mm Total diameter: 1800 x 1800 mm Total height:4000 mm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage technology and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delive ...

Offer of a drive-in shelf with about 500 parking spaces. Max load per pallet approx. 800 kg More information against request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error a ...

Offer shelf storage: 500 plots Storage weight up to about 1 ton per pallet. The pictures are vopn of a similar plant. Very good condition can still be visited. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded.  ...

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

Ladies and gentlemen, in the offer is an investment that could be suitable for an online mail order business. approximately 20,000 or more shipments per day. If you are interested, please contact us. Pictures and plans of the plant are available. Intermediate sale and error are excluded. Yours sincerely Trade & Translations

Kat. No. 12-2155 in a very good condition max. working pressure allowed: 1,8 bar max. temperature allowed: 130°C DxH: 1800 x 5000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

We have 500 kg Schraubnaegel, nails, screws, deck pencils on camp. are used, above all, in carpentries and in the palette construction. -for especially good hold. length 38 mms and 68 mms also to sell kilo way with questions all around the nails we stand to you with pleasure any time under the telephone number 09945 417 or by e-mail: autoteilekollmer@t on-line at the possession.

Damrow Double-0 5,000 litre cheesevat. Closed model, CIP cleanable. With Build-in wheydrain suitable for production from Mozerella, Gouda, Tilsit, cheddar, etc. 1x double walled no leaks 1x single wall In good condition. 2 pieces available.

; NEW

Kragarmregal, double-sided, 5.18m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelving unit with 4 pcs 2,295.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 double-sided shelves approx. 5.18 m high, hot-dip galvanized IPE 180 / 80 with 2x3 each. Arms 1.20 m, 500 kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 5180mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf armseached carrying capacity at load centre 600 mm 500 kg per arm / 2610 kg per staender with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchor s. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New

Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New