water chiller 50 used for sale

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: Railway railcars Information and pictures on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange ...

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Diesel tank, steel tank, fuel oil tank, tank system, storage tank with 50,000 litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognized test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling pipe with TW closure (filling cap) and immersion pipe, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII), 1 ladder and 1 spare sleeve for picking purposes, 1 optical leak detector with type approval and leakliquid. In this example, the tank was painted in ruby red. The container is re-primed on the outside and painted in ral 7011 - iron grey. Other colours at no extra charge: RAL 6005 - moss green, RAL 5011  ...

Austausch-Motor Actros DB OM 501LA-430 PS generalüberholt auch ohne Altteilrückgabe,geben Aufpreis,zu verkaufen.1Jahr Garantie info@miw-zeven.de

Incubator from Heraeus Type: B 5090 E Rated temperature: 70C 2-door glazed Dimensions: length x width x height: approx. 119 x 71 x 75 cm Weight: approx. 70 kg

All original spare parts+engines Lombardini from stock ready to ship the following motors available from stock immediately: LDW602/ 1003 / 1204/1204T/ 1404 MIW Ltd. Engine Repair Plant North-West Ring 8 D-2704 zeven-Germany Phone: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Mail=info@miw-zeven.de

Offer of a high-bay warehouse with approx. 2,500 parking spaces. Shelf stand approx. 6.00 m high All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Price ...

Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.

Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.

Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

We offer for sale 2 Jenbacher cogeneration plants, type: JW312GSB. Motors are of the manufacturer of Stamford. Performance: 675 KVA. Both units are complete. One is easily broken. Hours of operation: approx. 55000 and 28000 At the operational unit, the generator was replaced and overhauled.

Power: 4,000 - 4,500 / hour Number of cars: 2-railway-round runners current Cup format: Ø 60 mm, height: 80 mm maximum Cup size: Ø 75 mm, height: 80 mm Mainfiller: -for liquid products -Manufacturer: Hamba -Filling volume: 50-250 cm3 -Cleaning: CIP capable Closure: Sealing Dimensions (Lxwxh): 1.45 x 1.45 m x 2.7 m Power consumption: 400 V; 12.5 A; 5 KW Air requirement: 10.000 L / h. Schuy can general overhaul this system for you. This applied all electrical and pneumatic components on the latest state of the art and mechanical components are obsolete and are 80% new quality available. You will also receive a 1 year guarantee for the plant. Please contact us.

A fireproof card box approx. 500 kg of own weight. We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and erro ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 500 x 500 Side holm guided Plate size: 500x500mm Cake thickness: 25 mm Useful length: 2200 mm Chamber number: 47 pieces Filter pressure: 15 bar Closing pressure: min. 220 bar / max. 260 bar Cake volume: approx. 3.9 m3 Total filter area: approx. 17.4 m2 Expiration: closed Plate material: PP Plate transport: manual Filter cloths: optional Pump: Abel diaphragm pump optional

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

X-ray tube assembly type SRM 2250 red abzugen GS-500.

111

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

Ladies and gentlemen, we are happy to offer you wheat flour in different categories to be able to offer. Please send us your request. We will be happy to answer your request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. i ...

Lift table Hydr. mobile FHT 500 technical data: load-carrying capacity 500 kg table dimension 855x500x50 mm Max vertical lift 900 mm min table height 340 mm clutch height 970 mm foot pedal beating to max. height 55 roles of diameters 127 mm net weight 120 kg SPECIAL PRICE ASKS ASK FOR!

; ready for operation

Frequency converter soft start 8.3 kVA SEW Movitrac Used frequency inverters, approximately 3 years in operation, increasing the engine power, currently no longer in use. Unit tested and fully functional. Technical data: f input = 50-60 Hz f output = 0-400 Hz power 8, 3kVA in = UE = 380-500V 12A UA UE = No guarantee you can return but within according to the FU 10 business days and we will refund the purchase price. Information at 0170-2204056 or fa.raupp@t-online

used, kpl. 1 year warranty, plate size 500 x 500 mm, 30 plates, open outlet, 20 mm cake thickness, pressure max. 15 bar, capacity approx. 115 liters, filter area 12m2, dimensions 3000 x 1000 x 1400 mm, weight 1300 kg, motor hydraulics, drip plate, filtrate gutter, with or without filter cloths

1 x 6 Naturkorker Bertolaso, type: Delta 506R, 1994, li-re, performance: approx. 8,000 bottles / h, format parts: 1.0 ltr.,. Price: 7.900,-plus VAT from stock Dolgesheim

Oel-Diffusion pump Manufacturer: Leybold Type: DIP 50,000 Status: used Technical data Product: DIP 50000 Catalogue: 22240 Connection flange Suction side: DN 1000 ISO-F Connection flange Print side: DN 160 ISO-K Suction Below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l/s working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Max. pre-vacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Equipment: Pump is delivered without equipment quantity of equipment min.: 12.0 l 12.7 qt max.: 25.0 l 26.4 qt grid connection: 3-ph Y, 400 V, 50/60 Hz Heating capacity: 24 kW Number of heating cartridges: 24 Heating time: < 30 min Number of cooling water circuits: 3 Cooling water minimum pump: 1500 l/h 6.6 gal/min Duesenhut steam barrier: 150 l/h 0.66 gal/min Max. Cooling water pressure: 6 bar 87 psi Cooling water connection pump: 1/ ...

For Amos press 1600 3 Steück new mesh belts type 5060 22600 Mm Width 1600 mm Chain and closure polyester unit price 2250,-

Table 486 x 280 mm, X/Y/Z = 300/200/300 mm

Manufacturer: MAN GHH Power supply: 400 V / 50 Hz Power capacity: 500 kg Lifter for cutter trolleys 200 L Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

AGFA Motor for the cutter of SelectSet 5000. Including Belt. Available: now

AGFA Cutter for SelectSet 5000. Including Belt, Stillage and Knife. Available: now

size 59 x 74 cm Perfecting 8/0 - 4/4 Color-Pilot-Plus ink control system AIR Center (Rietschle) Technotrans temperation Technotrans combi cooling device with external condensator washing device for printing cylinder Quickstart Low Coverage stabilisation Powder (Hitronic) Inline Observer Optiprint Jackets preparation for colour temperation Non Stop semiautomat delivery Still in operation: Yes Available: sofort

AGFA Laser for SelectSet 5000 including PowerSupply. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running. Available: now

AGFA Laser for SelectSet 5000. The Laser is tested and working - see picture. We can send you the original picture in high resolution where you can see clearly the Laser running. Available: now

Type: Jumbo KODUKO 16-500 / DF510 / SKM103-03 Capacity: 2500 kg / h Cooking time: 120 min Type: Schroder DF510 Hopper diameter: 600 mm Hopper lenght: 520 mm Power: 0.12 kW Type: Schroder SKM103 Dimension: 2500 x 3375 x 2510

Make: GEA Küba Germany Type: CAV N09-2X3C Power: 606/497 kW (star/triangle connection) Pipe capacity: 209l 2 split circles with 3 fans each 6 fans a 900mm diameter

Oil diffusion pump Manufacturer: Leybold type: DIP 50,000 Status: used Technical data Product: DIP 50000 cat. No.: 22240 Suction side connection flange: DN 1000 ISO-F Connection flange printed page: DN 160 ISO-K Pumping speed for air below 1.0 x 10-4 mbar / 7.5 x 10-5 Torr: 50000 l / s Working range: 1.0 x 10-2 - 5.0 x 10-7 mbar 7.5 x 10-3 - 3.8 x 10-7 Torr Final total pressure: < 5.0 x 10-7 mbar < 3.8 x 10-7 Torr Maximum permissible forevacuum pressure: 6.0 x 10-2 mbar 4.5 x 10-2 Torr Resources: Pump delivered without resources Amount of resources min: 12.0 l 12.7 qt Max: 25.0 l 26.4 qt Power supply: 3-ph Y, 400 V, 50/60 Hz Heating power: 24 kW Number of cartridges: 24 Heating-up time: < 30 min Number of cooling circuits: 3 Minimal cooling water Pump: 1500 l / h 6,6 gal / min Jets Hat vapor barrier: 150 l / h 0.66 gal / min Cooling water pressure: 6 ba ...

Tip height: workpiece or grinding diameter 500 mm centre distance: approx. 2000 mm maximum workpiece weight: 1200 kg wheel dimensions: 600 Ø x 300 mm wheel speeds: 965 RPM elect. Supply: 380 V, approx. 15 kW space: 2300 x 9000 x 2000 mm weight: 13000 kg

Working length: 1040 mm max sheet thickness: 1.5 mm aluminium: 2.0 mm stainless steel: 1.0 mm maximum opening width with segments: 95 mm maximum opening width without segments: closed 235 mm maximum passage height: 90 mm rear gauge: 530 mm bending angle: 0-140° working height: 1005 mm width: 1570 mm depth: 820 mm height: 1270 mm weight approx.: 310 kg

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg

Power: 500 kVA / 400 kW Diesel engine / type: MTU / 12V183TB32 Cylinder: V12 Cooling: liquid-cooled Generator / type: NEWAGE STAMFORD / HCI 534 D2 Voltage: 400 / 231 V Frequency: 50 Hz Speed: 1500 min-1 Type: complete unit in the sound-proof 20' - HC-container Tank: 1500 litres Switchgear / Starter: automatic switchgear with handover synchronisation. Battery voltage / capacity: 24 V Generator switch: Yes Power switch: No Automatic: Yes Dimensions (L X W X H): approx. 6150 x 2480 x 2896 mm Weight: approx. 12000 kg Year built: 1996 / 2010

Power: 500 kVA / 400 kW Diesel engine / type: VOLVO / TAD 1631 GE Cylinders: number 6 Cooling: liquid-cooled Generator / type: MECC ALTE / ECN 40 SC/4 Voltage: 400 / 231 V frequency: 50 Hz Speed: 1500 rpm Type: complete unit in the soundproofed 20 container Tank: 1000 liters Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24V Generator switch: Yes Power switch: Yes Automatic: Kuhse Dimensions (L X W X H): approx. 6100 x 2340 x 2380 mm Weight: approx. 9000 kg

Jig

Bearing platform 4,000 x 5,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 2 main beams C+300 x 3 x 3,990 mm (perforated) 5 cross beams S+300 x 2 x 4,800 mm (closed) 10 mounting angles 2 Cross Associations 9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 5,000 mm Floor area: approx. 20 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Inhpbdx Columns: 100 x 100 x 3 mm Main beam: C-Profile C+300 x 3 mm (perforated) Cross member: Sigma profiles S+300 x 2 mm (closed) Flooring: 38 mm chipboard, white on one side P6 Columns in the following standard colors: Ral 7035, light grey Ral 70 ...

Bearing platform 4,000 x 15,000 mm, load capacity 500 kg / m2 Included in the scope of delivery are: 4 stands, one side 100 x 100 x 3 mm 4 stands, double-sided 100 x 100 x 3 mm 6Main carrier C+300 x 3 x 4,190 mm 15 cross member S+300 x 2 x 4,800 mm 30 Mounting angle 4 Cross Associations 27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural UK white, OK nature incl. fastening material incl. load signs Dimensions, technical data Steel construction: 4,000 x 15,000 mm Floor area: approx. 60 sqm Height top edge floor covering: up to 3,500 mm freely selectable ( other heights on request ) light height underside: OK minus 338 mm Capacity: 500 kg / m2 Columns: 100 x 100 x 3 mm Main carrier: C-Profile C+300 x 3 mm Cross member: Sigma profiles S+300 x 2 mm Flooring: 38 mm chipboard, white on one side Columns in the following standard colors: Ral 7035,  ...

Bearing platform 8,000 x 5,000 mm, load capacity 500 kg / m2 Dimensions / technical data Dimensions steel construction: 8,000 x 5,000 mm Dimensions floor area: 8,000 x 5,000 mm Floor area: approx. 40 m2 Height OK floor ingesis: up to 3,500 mm (freely selectable) light height underside: Ok minus 338 mm net load capacity: 500 kg / m2 same-distributed load Included in the scope of delivery are: 6 steel tube supports 100 x 100 x 3 mm 4 main beams C+300 x 3 x 3,990 mm (perforated) 9 cross beams S+300 x 2 x 4,800 mm (closed) 18 Mounting angle 3 Cross Associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK natural incl. fastening material incl. load signs Stand optionally in the following standard colours: Ral 7035, light grey Ral 7016, anthracite grey Ral 3000, red, fire Ral 5003, sapphire blue (Other colors on request!) Main and cross beams galvani ...