water chiller 50 used for sale

; Power [PS]: 170; Gross weight [kg]: 8250; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.

Diesel Fuel Tank 4.500 Liter, 4.500 Liter Tank, UL142 Certified

Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.

ALLSHENG Nano-500 UV-Vis Fluorometer / Spectrophotometer (Micro Volume and Cuvette) New equipment in its original packaging Year of Manufacture: 2023 Model: Nano-500B Light Source: Blue LED Excitation wavelength: 460 ± 20 nm Emission wavelength: 525–570 nm (45 nm) Minimum sample volume: 0.5 μL – 2 μL (2 μL recommended) Optical path length: 0.05 mm, 0.2 mm or 1 mm Light Source / Lifespan: Xenon Flash Lamp Detector type: 2048-element silicon linear CCD array Wavelength Range: 200 – 800 nm UV-Vis Wavelength accuracy: ±1 nm Spectral resolution: ≤3 nm (FWHM at Hg 253.7 nm) Absorbance accuracy: 0.003 Abs (1 mm light path) Absorbance accuracy: ±1% (7.332 Abs, at 260 nm) Absorbance range: 0.04 – 300 (at 260 nm, 10 mm equivalent) Detectable concentration range: 2 ng/μL – 15,000 ng/μL double-stranded DNA (dsDNA) Detection time: < 6 seconds OD600: Absorb ...

This 3-axis MORI SEIKI DURA VERTICAL 5060 was manufactured in 2007. It features a travel distance of 600 mm in the X-axis, 530 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a table size of 900 x 600 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DURA VERTICAL 5060 vertical machining centre we have for sale. Contact us for further details.

This 4-axis Mazak HCN-5000 was manufactured in 2024. It features an X-axis travel of 730 mm, Y-axis travel of 730 mm, and Z-axis travel of 800 mm. The machine has a maximum workpiece weight of 700 kg and a spindle speed of 18,000 RPM. If you are looking to get high-quality machining capabilities, consider the Mazak HCN-5000 horizontal machining centre we have for sale. Contact us for further details.

The Klingelnberg PSR 500 U worm gear testing machine was designed as a universal machine for the flexible testing of worm gears and is used by manufacturers of gear and gear technologies for the process of single-flank rolling testing for worm gear sets EFWP. Technical data Max. worm wheel diameter: 500 mm Max. spindle length: 500 mm Max. spindle diameter: 200 mm Center distance: 0 ... 400 mm Max. measuring speed: 60 rpm Braking torque: 2.5 Nm Max. worm wheel weight: 150 kg Max. spindle weight: 50 kg Table diameter: 300 mm Machine weight: 800 kg Dimensions: 1500 x 1500 x 1600 mm The following parameters can be measured here: • Single-flank deviations Fi', fi', fl', fk' • Crossing, concentricity, roundness (option) • Carrying pattern with digital camera • Pitch deviation • FFT analysis, spectrum Picture shows the machine in its current ACTUAL condit ...

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 70 Hour(s), Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 506 , Generator Volts: 415 , Generator Amps: 705 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/catalog/product/view/id/218740, , = More information =, , Type number: 12QTK GENERATOR 506 KVA

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 480 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 558 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 380 , Generator Amps: 760/696 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/detroit-diesel-12v92-ta-genera tor-500kva/112, , = More information =, , Empty weight: 5.075 kg, Type number: 12V92 TA GENERATOR 500KVA

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/detroit-diesel-03d53-50348 312-used/300, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 03D53 / 50348312; Transport weight [kg]: 565

Winding machine Lippelt Celba Multi Roll S-50N -Wrapping machine Lippelt -Type: S-50N - Condition see pictures

Aprovis FriCon Gas Dehumidifier and Desulfurizer Plant for cleaning Biogas. Biogas cleaning plant including APROVIS FriCon 150/500-40-15-2-I0 Gas Dehumidifier and Desulfurizer Plant. Type: ESA 44,8m³ Year: 2019 Fuel: Biogas Scope of supply: Gas Cooler, Air Cooled Liquid Chiller, Base Frame for Gas Dehumidifier, Insulation, Demister DN 200, Syphon. Technical data for Desulfuriser Plant: >3.000 mg/m 3 H 2 S and 600 Bm³/h Gas flow: 600 Bm³/h (at around 37-40 o C) H 2 S-Input concentration: 2.000 ppm (3,000 mg/m³) Gas temperatures (entrance): 25-40 o C H 2 S load: maximum 1.800 g/h Columns pressure loss: < 3-8 mbar Pressure level: 45 mbar (Test pressure 50 mbar) Low pressure: maximum –10 mbar. Minimum inlet pressure: 2-4 mbar Hot water: DN=32 Dung use: app. 3,0 kg per day full load (approx. 110-115 Ct costs 1 kg) Extra air: 11-14 % Container/tank size: approx. ...

Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Decoiler mechanical max. 1000kg Coil inner diameter 400/508mm Straightener with 9 straightening rollers and 2 feed rollers and film unwinders The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals!

Dematic conveyor accumulating roller conveyors 2625-500-440 RA1995 Accumulating roller conveyor Nominal/outer width (NB): 500 mm Available conveyor lengths (FL): 2625 mm, expandable with further pieces Further information Manufacturer: Siemens Dematic Type: Accumulation roller conveyor Accumulation size: 750 mm Year of manufacture: unknown Condition: good (used) roller width (RB): 440 mm roller pitch: 125 mm variable drive type: SEW gear motor weight of conveyed material: up to 30 kg Accumulating mechanics: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g.: Frequency converter supports side guides Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric data: 380-400 condition: very good (used) Conveying length in mm: 2625 Nominal / outside width in mm: 500 Roll width in mm: 440 Ro ...

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 590 Turning length mm: 510 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Equipment Chip conveyor Signal lamp Tool measuring arm High pressure pump Workarea light 4th axis Interface for Bar feeder Rated power kVA Working time hours Under power: 7456 Spnidle: 5423 Basic machine dimensions / weight Length mm: 3495 Width mm: 2050 Height mm: 2230 Weight kg: 5800

Lower piston press => table/stroke from bottom to top. Technical data Manufacturer: Hans Schoen Year of construction: 1997 pressing force: 500t table clamping area: 640mm x 800mm mounting height: 380mm stroke: 150mm Find more here - .ucymachines/

Horizontal broaching machine RAWT 25 x 4000 x 500 company Hoffmann Year of manufacture 2003 Max. Operating pressure: 70bar, filling quantity hydraulic fluid: 630l, with loading gantry and sliding guide with carriage Find more here - .ucymachines/

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - .ucymachines/

The Combi-Pack CW 500 – S is a packaging machine used for combining and packaging products in various industries. Heres a general description and specifications for the Combi-Pack CW 500 – S: Machine Description: The Combi-Pack CW 500 – S is a versatile and efficient packaging machine designed for high-speed packaging applications. It incorporates advanced automation and control systems to streamline the packaging process and increase productivity. The machine is built with robust construction and precision engineering to ensure reliable and consistent performance. Specifications: 1. Packaging Speed: The CW 500 – S offers a high packaging speed, typically capable of packaging up to X products per minute (specific speed may vary based on product size and characteristics). 2. Product Compatibility: The machine is suitable for packaging various types of products, including but  ...

2002 Deckel Maho DMU 50T still in use, can be viewed Find more here - .ucymachines/ Contact us at - sales@ucymachines

Pressure: 15 bar Motor: 11 kW Free air delivery: 1,319 m³/min Measurement (WxHxD): 2125 x 1730 x 820 Weight: 550 kg Compressed air connection: 1 1/4

Pressure: 10 bar Motor: 5,5 kW Free air delivery: 0,815 m³/min Measurement (WxHxD): 1890 x 1520 x 854 Weight: 437 kg Compressed air connection: 1/2

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

2023 Haas UMC-500SS 5-axis vertical machining center Manufacturer: Haas Year: 02/2023 In production: 11/2023 X: 610 mm Y: 406 mm Z: 406 mm B: 120’ to 35-‘ C: 360’ Spindle speed: 12000 rpm Spindle taper: CT 40 Toolholders Vise Machine in very good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Drive: . kW Capacity: . kg/h material: . 8 pieces For manipulator A5.1 Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Trumpf Model: TruDisk 8002 (6000) Type: TruLaser-Robot 5020 Date of Manufacture: December 2007 Weight: 2000 kg Technical Specifications Electrical Details: - Voltage: 380 V (-10%) to 460 V (+10%) - Phase: 3 Phase + PE - Frequency: 50 - 60 Hz - Current: 56 A (at 400 V) Power Consumption: - Power: 39 kW / 40 kVA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Drive: . kW Capacity: . kg/h material: . 3 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible.