waste used for sale

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

Shaftless Unwind Monomatic Typ MD 107 (150 mm core diameter) FIFE side edge control max. roller diameter 1,070 mm Web tension control device Multiple breaking device Trimming station Cutting accuracy +/-0.2 mm Automatic angle adjustment Automatic sheet length adjustment without gear change Working width up to 1250 mm min. Working width 600 mm, cutting length from 550 to 1500 mm Materials from 60 g/sqm to 150 g/sqm (unwinder max. 120 g/m2) Ionisation device Waste ejection station Shingled delivery Belt delivery extended to the end of the stack Counting device Pile delivery with jogger max. mechanical output 300 m/min Cerutti embossing station - suitable for surface embossing (steel - paper 1 : 1.85) Embossing calender output max. 250 m/min

Waste press Strautmann RC 1100TT after renovation Specifications Maximum pressure: 4 tons Use for: 1100 L Power supply: 230V/1.5 kW Year of construction: 1996 Price: on request If you have any questions, please call us: +48 696 072 985

Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler contains a durable, electronically controlled, water cooled moving grate which is designed to burn from wood pellets to wood chips and waste wood. The plant was installed in year 2012 and it has been running with wood pellets till December 2022. It is complete, good condition plant with concrete element building, two large pellet silos and a hot water accumulator tank for heat load balancing. These items will be optionally available for those who are interested in them. It has load controlled primary and secondary air combustion fans as well as speed-controlled exhaust gas fan which ensures high efficiency combustion and low electric power consumption. Two step combustion is designed for low NOx emissions. The durable triple layered ceramic and steel combustion chamber includes flexible dilation joints ...

A used and well-maintained ABA from HUNDEGGER without planer, but with transfer cross conveyor. Type. Hundegger K2 – 5 axle 450 EKP control Year of construction 2007 5 strand feed cross conveyor 2200 mm wide Pull-out wooden shelf Under-counter swivel cross-cut saw – bottom open at the bottom for waste on conveyor belt Saw table chrome-plated Refined wooden support surfaces Saw blade diameter 800 mm Universal milling machine 5 axis – With finger milling cutter and dovetail milling cutter Control for disposal facility Front marking device Ink. Jet Markers Marker and marker at the bottom Chains – Rear Horizontal Slitting Device Finger milling machine at the bottom vertical 1 Drills down vertical 2 horizontal drill rigs, one of them swivel Pneumatic beam turning station With ÜGQF Without planer Weight of the ABA 15 t Pure machine length approx. 28 m withou ...

As good as new machine with very few operating hours (built in 2020). This like-new, very powerful, fully automatic shrink wrapping machine works with a permanently heated longitudinal and a cycled transverse welding, which offers at least 3 undeniable advantages: • No length limit of the product to be packaged • Significant increase in production capacity • Cost savings due to less film waste • Machine dimensions: 2180 x 1545 x 1525-1655 mm • Dimensions welded frame: 500 mm/length unlimited • Max. product height: 200 mm • Max. film roll width: 600 mm • Max. ø film roll: 350 mm • Production capacity: 600-4200 per hour (depending on product size and material) • Belt speed: 10-30 m/min • Power rating: 380-415V /3ph/ 50/60Hz • Consumption: 2300W • Continuous longitudinal seam with permanently heated transverse welding • Welding beam for longit ...

Forklift tipping container, tipping container, tipping trough, forklift trough, waste tipping container, scrap tipping container -Condition: New -Content: 0.8 m3 -Steel sheet: 3 mm -Intake: for forklift tines -Max. Tine width: 150 mm -with tilt mechanism -Storage: stackable -Anti-corrosion: Powder coated -Dimensions: 1750/750/H870 mm -Number: several available -Price per piece -Own weight: 180 kg

Baier Geba 46 Embossing and Punching machine Machine for punching, embossing and laminating of adhesive labels, labels and other rolls. Age: 1997 Max. web width: 250 mm Cutting area: 240 x 200mm Embossing area: 240 x 200mm 2x Unwinder 2x Punches Rewinder Waste Rewinder

Electronic vacuum stuffer. Stuffer specially designed for the drawing of all calibers, in natural casings such as collagen, cellulose. The RVF 327 stuffer is designed for small and medium-sized companies, with frequent changes in the type of products and standard quantities of meat sausages. The RVF 327's distinguishing features are reliability, quick and easy cleaning, minimization of residual product or waste, and low energy consumption. The vane rotor feed pump, made of wear-resistant stainless steel, ensures a long service life and the highest product quality. Achieving smooth handling of all sausage mixtures with a minimum of air bubbles. The touch screen simplifies operation for the user and has been designed for industrial use. Available with 200 litre loading hopper. It has a port for connection and control of the different staplers or other accessories. Characteristics: H ...

COMAFER grinder model DINAMIC MAC 500 for wood waste: - hourly production from 100 to 200 kg/h - rotor motor HP10 / kw 7.5 , volt 380 - rotor diameter D=160mm, with knives - Pneumatically operated feed drawer - Hopper dimensions 965 x 500 mm - Overall dimensions approx. 1.7 x 0.95 x h=1.5 m - weight about 800 kg - machine according to CE standards, year 2000 AVAILABILITY FROM APRIL 2024

: 300 mm : 300 mm : 300 x 260 mm saw band length: 3920 x 34 x 1,1 mm table height: 780 mm band speed: 20 - 100 m/min total power requirement: 3,7 kW weight of the machine ca.: 1,65 t dimensions: 2,0 x 2,05 x 1,7 m PROMOTIONAL PRICE 2-column high-performance automatic band saws from the SBS series The SBS series impresses with its sophisticated technology, high quality and longevity and unrivaled, sophisticated standard equipment. • Modern SNC 20 control for CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic belt tension • Clamping pressure regulation • Double vice (before and after the belt) • Creep path for positioning • Bundle tension prepared electrically and hydraulically • Chip conveyor The SNC 20 control allows you to enter up to 20 different sawing tasks (length and number of pieces) co ...

Used KRONES Plastic Labeling Machine Introduction The Used KRONES plastic labeling machine is a pre owned bottling machine currently housed in storage Impressively the machine offers a high speed of 15 000 BPH bottles per hour and is specifically designed for PET containers accommodating a standard format of 1 0 L Technical Features of the KRONES labeling machine At the heart of the Used KRONES plastic labeling machine are its 10 plates These plates move via a mechanical cam brake clutch ensuring precision and reliability over time Moreover the system is equipped with a single station rotating clockwise This aspect is crucial for maintaining efficiency during the labeling process Labeling Methodology The labeling method employed is Roll feed coil ensuring a consistent and uniform supply of labeling material thereby minimizing waste and enhancing operational efficiency Furthermore the lab ...

Gallus EM 280 8 colours with chilled rollers and flatbed die cutting from 2000 Gallus Arsoma EM 280 8 colours – Delam Relam Fully Equipped 8 printing units 1 interchangeable Screen printing unit 8 GEW UV dryers 2 Rotary die cutters Slitting unit Cold foil possibilities Ergeca Inspection camera Delam Relam Turning bar Multiple laminating opportunities Corona Treatment Splicing table Web guide Waste Rewinder Manufacturer: Gallus Arsoma Type: EM 280 Year of manufacturing: 1999 Web width: 282 mm Printing width: 280 mm Machine is available in February – can be seen in production

SMAG GALAXIE 2005 3 colours Screen printing + Hot Foil + Flat Bed Die Cutter SMAG GALAXIE 2005 3 colours Screen printing + Hot Foil + Flat Bed Die Cutter 3 Screen printing units 3 UV dryers 1 hot foil stamping unit 1 Flat bed die cutter Slitting unit Splicing table Web guide Waste Rewinder Manufacturer: SMAG GRAPHIQUE Type: Galaxie 2005 Year of manufacturing: 1999 Web width: 330 mm Printing width: 330 mm Machine is available in February – can be seen in production

Gallus Arsoma EM 280 8 colours – Delam Relam Fully Equipped 8 printing units 1 interchangeable Screen printing unit 8 GEW UV dryers 2 Rotary die cutters Slitting unit Cold foil possibilities Ergeca Inspection camera Delam Relam Turning bar Multiple laminating opportunities Corona Treatment Splicing table Web guide Waste Rewinder Manufacturer:Gallus Arsoma Type: EM 280 Year of manufacturing: 1999 Web width: 282 mm Printing width: 280 mm Machine is available in February – can be seen in production

Used filling line for CSD and still drinks up to 4000 bph Bottles PET and Glass In the packaging industry versatility is key This filling line handles both PET and glass bottles This double compatibility allows for great flexibility in production adapting to different market needs Filling Capacity of the used filling line for CSD and still drinks The filling capacity varies according to the size of the bottles With 0 5 liter bottles the capacity reaches 4 000 units per hour For 1 0 liter bottles the capacity drops to 3 000 while for 1 5 liter bottles it stands at 2 500 This production scale adapts to different sizes of operations ensuring efficiency and flexibility Format Molds present in the used filling line for CSD and still drinks Format molds are a crucial element in these lines This line features three interchangeable molds for PET and glass covering the most common sizes of 0 5 1  ...

In the highly competitive bottling industry the efficiency of the production line is paramount This is where the used Sacmi labeling machine comes into play an equipment that though not brand new continues to guarantee exceptional performance thanks to its robust engineering We examine the Opera 400 model produced in 2010 known for its reliability even at high speeds Performance and Specifications The used Sacmi labeling machine Opera 400 model stands out for its ability to operate at impressive speeds managing up to 40 000 BPH A crucial aspect is its versatility in bottle formats accepting 0 50 L 1 0 L and 1 5 L making it ideal for production lines that require quick reconfiguration for different product sizes Components and Functionality Equipped with 25 plates this used Sacmi labeling machine employs a mechanical cam brake clutch for plate movement ensuring precision and synchronizati ...

Used Filling Triblock ENOBERG up to 5500 bph Enoberg Triblock 24 24 6 6 The ENOBERG triblock is a significant innovation in the bottling sector Equipped with 24 clamps in a single treatment rinser this machinery ensures superior cleaning effectiveness Its height adjustable clamp carousel offers unprecedented versatility in adapting to different bottle sizes Consequently the ENOBERG triblock up to 5500 bph is an ideal option for flexible production Filling Station with 24 Light Pressure Taps The ENOBERG triblock s filler features 24 taps operating at light pressure This unique feature minimizes the risk of product oxidation Filling occurs directly onto bottles via a pump without a bell increasing efficiency and reducing waste Furthermore the height adjustable filling bell and movable filling taps rising and descending on the bottle via a cam offer precise process control Stability and Cle ...

Used Filling Monoblock Vir Mauri Overview of the Vir Mauri Used Filling Monoblock The Vir Mauri used filling monoblock is an advanced bottling system designed to work with a speed of 8000 BPH bottles per hour Its compatibility with glass containers makes it ideal for products such as alcohol oil and spirits Characteristics of the Filler The Vir Mauri monobloc filler is equipped with 36 valves ensuring precise volumetric filling Its fixed nozzles ensure uniform filling reducing waste and improving overall process efficiency Cappers Specifications The system includes two distinct cappers The Capper 1 is suitable for aluminum screw caps with 8 heads and cap size of 31 5 x 44 mm The Capper 2 is designed for pressure caps with 6 heads This versatility allows the monobloc to adapt to different capping needs Conditions and Maintenance Currently the Vir Mauri monoblock is stored in warehouse It  ...

Used Combi Sidel Bottling Line 2006 Are you in search of a top tier bottling solution for your still water product Look no further than the exceptional Used Combi Sidel Bottling Line from the year 2006 With a proven track record in the industry this Sidel Line offers unparalleled performance and efficiency ensuring that your production process remains seamless while maintaining the highest quality standards Key Features of Sidel Combi line 1 Impressive Speed The Used Sidel Bottling Line manufactured in 2006 boasts a remarkable speed of 25 200 bottles per hour BPH This means your production output can meet demanding market requirements without compromising on precision and excellence 2 Dedicated to PET Crafted specifically for PET containers this Used Combi Sidel Bottling Line is optimized to handle PET packaging with the utmost care This ensures that your still water products are preserv ...

Used doy pack filling machine Bossar B 2500 Introduction and Structural Composition In the landscape of technical solutions for packaging the used Bossar B 2500 doy pack filling machine emerges as an advanced piece of equipment thanks to its construction features and high level functionality Starting from its configuration the Bossar B 2500 is a horizontal machine specifically the B2500 L STU 1 model This designation is not accidental but indicates its ability to operate with a horizontal arrangement fundamental for certain types of packaging and to maintain consistent production efficiency This filling line works in various formats from 200ml to 1l A crucial part of its architecture is the choice of stainless steel for the entire base of the automatic machine This not only provides significant corrosion resistance but also a rigid and robust structure which is indispensable in an indust ...

Schneidlinie Autotrimm PACE / Cutting Line Autotrimm Polar 137XT-AT PACE Schneidlinie Lift Ruettler Ablader / Cutting Line Lift Jogger Unloader Year 2004 - Serial-No. 7441238 Schnittbreite / Cutting width max. 1370mm Autotrimm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table grosse-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Stapellift / Stack Lift Polar LW 1000-4 Baujahr / Year 2004 - Serial-No. 7493313 Palettengroesse / Pallet size max. 800 x 1.200mm Wannengroesse / Size of platform 840 x 1.270mm Hub / Stroke max. 850mm Tragkraft / Carrying capacity max. 1.000kg Ruettelautomat Luftausstreichwalze / Automatic Jogger air-removing roller Polar RAH-4 Entladung zur Hintertischbeschickung / unloading for ...

Used Flash Pasteurizer UDMACHINES Year 2022 Introduction To begin with the Used Flash Pasteurizer UDMACHINES Year 2022 emerges as a cutting edge solution in the liquid thermal treatment sector This machine meticulously designed by UDMACHINES is a model PAS 10000 45 2P E It s distinguished by its operational efficiency and precision setting a new standard in the industry Key Characteristics UDMACHINES known for their innovation manufactured this Used Flash Pasteurizer in 2022 making it a relatively new addition to the market Importantly it boasts a remarkable operational capacity of 10 000 liters per hour This capacity is a testament to its significant efficiency especially in handling large volumes for treatment Pasteurization Method and Functional Aspects This pasteurizer operates using the flash method a critical feature Specifically it rapidly heats liquids to 90 C This process is not ...

Sammelhefter / Saddle Stitcher Mueller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - Year 2007 - Serial-No. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - Year 2007 - Serial-No. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - Year 2007 - Serial-No. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - Year 2007 - Serial-No. MMZ0 1 306 445  – include 4th & 5th knife attachment Kreuzleger / Compensating Counter Stacker Perfetto 0450.0400 - Year 2007 - Serial-No. MMZ0 1 306 445-60 Bandauslage / Band Delivery Mueller Martini 1564.0400 - Year 200 ...

STOKKERMILL K750 cable granulator-separator machine FROM STOCK! Manufacturer: STOKKERMILL (Made in Italy) Size: 120x120x180 cm Weight: 750 Kg Power: 7,5 Kw Capacity in input: 90-110 kg/h Table dimensions: 250x800mm Range of diameters: 1 a 35 mm Description Wire shredder for electric cables e-scrap K750 – A concentrate of techncology. Dry densimetric table cable shredder for the recycling of copper electrical wires. Wire shredder for electric cables K750 is the last model of the manufacturer Stokkermill Recycling Machinery in the segment of small solutions for the recycling of electrical cables and wires. Thanks to the accurate engineering research Stokkermill is able to offer a "small but great" machine at an affordable purchasing price with the lowest maintenance cost. Both the sizes of the mill, with 3 rotating and 2 stationary blades, and the dry densimetri ...

Kolbus CASERMAKER DA 232 Year: 2004 Serial Nr.: 236 Transport feed Hopper feed of pre-cut boards Hot melt glue Copilot system with touchscreen Auto splice and waste cutter Automatic lubrication Max size 405 x cover 560, 110 x 155 mm • Max cover thickness 4 mm

Flail mower rear attachment cat. I and II, for PTO drive 540 rpm, consisting of 2 x 125 cm flail mower, foldable left and right, mowing width approx. 350 cm in connection with front mower (not included!), otherwise approx. 100 cm remain unprocessed in the middle. Little-used machine from public Hand, built in 2009. Various front mowers and other mowing technology in stock - ask us! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...

Balemaster Year: 2006 Type: CMG 268 Waste compactor

Drum screening machine for sieving compost, humus, sand, wood chippings, waste fractions, shredded goods etc., machine is technically completely overhauled, 1 x screening drum as required new or as good as new included, good ready for use,

General SKULT009 LocationGermany MakePharmatec GmbH TypeFluent Tank No.12563 Year of construction2021 Specified Features - Pressure vessel Material finishPolished inside Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume350 Ltr. Pressure3 Bar Vacuumcheck Pressure vessels MaterialStainless steel 1.4404 (316L) Capacity350 Ltr (460 Ltr) Vessel sizesdia.791 x696mm Dished topcheck Dished bottomcheck With covercheck OutletG1 Max. temperature-10/95 Degr.C. With propellor stirrerMagnetic ZETA, Type BMRT 125 PI Ex S Dk Y With variable speed drivecheck Speed mixing shaft75-540 rpm Information With switchgearcheck Total height+/- 1,7 M CEcheck Mounted on legsplatform With switchcheck Extra SpecificationsThe tank is equipped with pressure gauge, temperature sensor and level switches and valves (manually or pneumaticall ...

General SKULT005 LocationGermany MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs TypePool Tank No.12466 Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume80 Ltr. Specified Features - Stainless Steel Reactor Reactorcheck Capacity65 Ltr (80 Ltr) Vessel sizesdia.347.6 x726mm OutletG1 With jacket(13,0 Ltr, 0,6M2) Max. temperature-10/95 Degr.C. With propellor stirrerMagnetic ZETA, Type BMRT 50 W EX S Dk Motor(Ex) Speed mixing shaft125-860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information With switchgearcheck Total height+/- 1.5 M2 CEcheck Mounted on legsmobile skid With switchcheck ATEX compatiblecheck Extra SpecificationsThe tank is equipped with a pressure gauge, temperature sensor, level switc ...

General SKU230N087 LocationBarneveld MakeReko Industrial Equipment BV TypeInternally-fed drum screen TI-S 1200/1400 No.TZX0006/0001/S Year of construction2008 Main Features MaterialStainless steel Motor1.5 KW Length4000 mm Specified Features - Rotating sieve Rotating sieveRotating drum sieve Sieve sizesdia. 1200x4000mm Motor1,5 KW, 230/400 Volt Sieve perforation3 and 4mm MaterialStainless steel Information Floor space5,0x1,6 M Total height2,5 M Weight2000 KG Extra SpecificationsINTERNALLY FED DRUM SCREEN Separation of solids from waste and process water by means of an internally fed rotating perforated drum strainer. Rotating sievesReko koepckeSieves > Rotating sievesBrand > Reko koepcke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

General SKU230N088 LocationBarneveld MakeReko Industrial Eqiupment BV TypeInternally-fed drum screen TI-S 1200/4000 No.TZX0006/0002/S Year of construction2008 Main Features MaterialStainless steel Motor1.5 KW Length4000 mm Specified Features - Rotating sieve Rotating sieverotating drum sieve Sieve sizesdia. 1200x4000 Motor1,5 KW, 230/400 Volt Sieve perforation3 and 4mm MaterialStainless steel Information Floor space5,0x1,6 M Total height2,5 M Weight2000 KG Extra SpecificationsINTERNALLY FED DRUM SCREEN Separation of solids from waste and process water by means of an internally fed rotating perforated drum strainer. Rotating sievesReko koepckeSieves > Rotating sievesBrand > Reko koepcke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspe ...

General SKULT004 LocationGermany MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs TypeMain Fraction Tank No.12462 Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume20.5 Ltr. Motor0.09 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity15,0 Ltr (20,5 Ltr ) Vessel sizesdia,250 x315mm Outlet3/4 With jacket(4,5 Ltr, 0,19m2) Max. temperature-10/95 degr.C. With propellor stirrerMagnetic ZETA, Type BMRT 50 W EX S Dk Motor0.09 kW, 230-400 Volt, (Ex) Speed mixing shaft125-860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information With switchgearcheck Total height+/- 1,5 M2 CEcheck Mounted on legsmobile skid With switchcheck ATEX compatiblecheck Extra Specifications- The tank is equipped  ...

General SKULT007 LocationGermany MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs TypeSolvent Tank No.12474 Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume120 Ltr. Specified Features - Stainless Steel Reactor Reactorcheck Capacity120 Ltr (150 Ltr) Vessel sizesdia.492 x672mm Dished bottomcheck Dished top sidecheck OutletG1 With jacket(21,0 Ltr, 1,02 M2) Max. temperature-10/95 Degr.C. With propellor stirrerMagnetic ZETA, Type BMRT 50 W EX S Dk Motor(Ex) Speed mixing shaft125-860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information With switchgearcheck Total height+/- 1.5 M2 CEcheck Mounted on legsmobile skid With switchcheck ATEX compatiblecheck Extra SpecificationsThe tank is equipped with a ...

Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140m3 - Mixing and equalisation tanks 2, 40m3 - Mixing and equalisation tanks 3, 80m3 - Bioreactor 1, 240m3 - Bioreactor 2, 240m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100m3 - Secondary sedimentation tank 2, 100m3 - Thin sludge tank, 70m3 - Thick sludge tank, 90m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25m3 - Various process water pumps, Bioreactor capacity 2 x: 240 m3, Operation / Control: Siemens Simatic S7, Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x  ...

General SKULT006 LocationGermany MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs TypePool Tank No.12466 Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume80 Ltr. Specified Features - Stainless Steel Reactor Reactorcheck Capacity65 Ltr (80 Ltr) Vessel sizesdia.347.6 x726mm OutletG1 With jacket(13,0 Ltr, 0,6M2) Max. temperature-10/95 Degr.C. With propellor stirrerMagnetic ZETA, Type BMRT 50 W EX S Dk Motor(Ex) Speed mixing shaft125-860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information With switchgearcheck Total height+/- 1.5 M2 CEcheck Mounted on legsmobile skid With switchcheck ATEX compatiblecheck Extra SpecificationsThe tank is equipped with a pressure gauge, temperature sensor, level switches, valves (manually or pneu ...

General SKULT001 LocationGermany MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs TypeBreak / Side Fraction Tank No.12450 Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume7 Ltr. Motor0.09 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6,0 Ltr (7,5 Ltr) Vessel sizesdia.250 x402mm Outlet3/4 With jacket(2.5 Ltr, 0.11m2) Max. temperature-10/95 degr.C. With propellor stirrerMagnetic ZETA, Type BMRT 50 W EX S Dk Motor0.09 kW, 230-400 Volt, (Ex) Speed mixing shaft125-860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information With switchgearcheck Total height+/- 1,5 M CEcheck Mounted on legsmobile skid With switchcheck ATEX compatiblecheck Extra Specifications- The tank is equipped ...

General SKULT002 LocationGermany MakePharmatec GmbH TypeBreak / Side Fraction Tank No.12450 Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume7 Ltr. Motor0.09 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6,0 Ltr (7,5 Ltr) Vessel sizesdia.250 x402mm Outlet3/4 With jacket(2.5 Ltr, 0.11m2) Max. temperature-10/95 degr.C. With propellor stirrerMagnetic ZETA, Type BMRT 50 W EX S Dk Motor0.09 kW, 230-400 Volt, (Ex) Speed mixing shaft125-860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information With switchgearcheck Total height+/- 1,5 M CEcheck Mounted on legsmobile skid With switchcheck ATEX compatiblecheck Extra Specifications- The tank is equipped with a pressure gauge, temperature s ...

General SKULT003 LocationGermany MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs TypeBreak / Side Fraction Tank No.12450 Year of construction2021 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume7 Ltr. Motor0.09 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity6,0 Ltr (7,5 Ltr) Vessel sizesdia.250 x402mm Outlet3/4 With jacket(2.5 Ltr, 0.11m2) Max. temperature-10/95 degr.C. With propellor stirrerMagnetic ZETA, Type BMRT 50 W EX S Dk Motor0.09 kW, 230-400 Volt, (Ex) Speed mixing shaft125-860 rpm Stainless Steel Reactors MaterialStainless steel 1.4404 (316L) Information With switchgearcheck Total height+/- 1,5 M CEcheck Mounted on legsmobile skid With switchcheck ATEX compatiblecheck Extra Specifications- The tank is equipped ...

Waste water neutralisation, Capacity: 8 m3/h, Operation / Control: Control cabinet with touch-screen display / WAGO, Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Hump shredder PHSS 40/110 Specifications: Manufacturer: Höcker Polytechnik Type: PHSS 40/110 Year of construction: 2011 Drive power: 22 kW Working width: 1100 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Material: Punching Waste, Cardboard Punching Mesh, Corrugated Cardboard

Unused TGM model E250 Matic fully automatic stainless steel tube filling and sealing machine for Pharmaceutical, Cosmetic, Chemical and Food Industry products. Output Capacity: Upto 3,700 units/hour Metal Tubes: Diameter 10-42mm, Length 50-240mm Plastic Tubes: Diameter 10-50mm, Length 50-240mm Tube print orientation and sensor to detect tube right way up, minimises waste. Fold and roll crimping system for closing metal; polyethylene/laminate tubes sealed by hot air or hot jaws. Integrated ergonomic tube loading system, swings aside for easy access The machine is presently set up with hot air for plastic tubes and there is a brand new wrapped head supplied for aluminium tubes. Additional options included: Stirrer/scraper; Coding stamp; Product level control; Tube orientation system; Water cooler, Pharmaceutical product/data recovery system for recall of batch history  ...

Used filling monoblock Melegari up to 30000 bph In the industrial bottling landscape notably the Melegari filling monoblock model FILLJET NP B 60 60 18 stands out Designed to optimize production it boasts a capacity of up to 30000 BPH Furthermore this analysis evaluates its technical specs operational efficiency and adaptability It emphasizes its significant impact in still water bottling Operational Efficiency and Production Capacity Manufactured in 2015 and still operational the machinery proves its durability and reliability Importantly it handles PET containers in 0 20 L 0 33 L and 0 6 L formats Consequently this allows significant versatility in product sizes A speed of 30000 BPH indicates remarkable production efficiency positioning it as a competitive option for high volume facilities Componentry and Technological Innovation The rinser incorporates 60 grippers for effective single ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 9500 € : 196.65 € : 250 mm : 6 mm : 3 mm : 25 1/min : 90 ° : 4 kW : 950 mm : 780 mm : 1115 mm : 585 kg Hydraulic drive Automatic adjustment of the blade gap 2 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to ",CE", regulations User manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 18900 € : 387.45 € : 200 mm : 4 - 6 mm : 2 - 3 mm : 30 1/min : 30 - 140 ° : 4 kW : 900 mm : 1150 mm : 1240 mm : 1150 kg Hydraulic drive Variable cutting angle 30 - 140° Automatic adjustment of blade gap 4 downholder 2 gauges angle adjustable Protection cover, acrylic glass Foot pedal Waste box According to ",CE", regulations User manual in English or German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 256380 € : 2 kW : - : 8 mm : 4 mm : 6 mm : 2 mm : 4 mm : 170 mm : 20 (optional 12) mm : 120 x 120 mm : 150 x 100 mm : 6200 mm : 32 kg/m : 0,02 mm : 0,05 mm : 60 m/min : 60 m/min : 30 m/min : 840 °/s : 21,3 kW The machine consists of the following components: - Encapsulated cutting room with protective glazing - CNC control with 17", screen - Laser source Brilase 2 kW Optimum incl. cooler - Cutting head Lightcutter F125 with automatic focus adjustment -manual unloading table 4.5 - Positioning laser - Central lubrication - Waste wagon - CAD/CAM software with autonesting - Work area lighting PRICE FCA TÜRKIYE OPTIONS: Extraction unit with filters € 15.780,- Semi-automatic loading system € 56.550,- Manual unloading table 6 m € 15.450,- Durma cloud license € 830,- ALTERNATIVE: Same model but with 3 kW laser source € 282.550,- Th ...

With a long-dwell, continuous-flow, transverse-sealing system, the Tornado LD reaches packaging speeds of up to 100 packages per minute while delivering hermetical seals. The cantilevered construction houses the mechanical and electrical components at the rear of the machine in separate and protected areas. The sealing units and conveyor surfaces are housed at the front. The machine face is therefore free from obstacles and can easily be cleaned, preventing production waste from coming into contact with mechanical and electrical parts. The Tornado LD brings high performance levels, reduced maintenance, and is built with top-quality materials and components. These machines are built to last. Power supply: 3x400V Power: 3.5 kW Production year: 1998

Automatic machine for thermal foil packing. Closes the package from 4 pages. The machine is operational, works in continuous mode. The input tray draws and moves the object to the welding chamber. Welds the film, cuts off, removes excess film using a side waste collection system. The internal feeder then moves the object into the heating tunnel to shrink the film. Machine Parameters: - FAI PACK CS9700 packing machine - FAI PACK FR30FT heating tunnel -Dimensions of packed items - knife length (930mm) package up to 750 mm - width up to 500 mm - height up to 300 mm - Production year 2000 Used machine. The machine is in motion.