waste used for sale

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

Vacuum Oil Filtration Hourly output 600L oil daily output 4800L Total power consumption E.L.72kw AMMA Filter 3,5M2 + spare Recommendations, HR cleaning, transformer oils, diesel, used cooking oils The technology of purely physical distillation at low temperature and microfiltration purification was chosen for the DTS device. It allows to quickly separate from the waste oil all types of contaminants such as moisture, oxides, metal impurities, carbon residues, colloids, suspended and emulsified substances, completely restore the physicochemical parameters (ie viscosity, PH value and flash point) of the waste oil so that met the standards and was exactly the same as the brand new oil.

Wet cast concrete pipe production plant for sale • Fully automated factory designed and developed by Consmema/KTB • Fully complete set of machinery • In operation since 2016 in West Europe • Capacity up to 300 pipes per day in different sizes: 300- 1500mm • Very distinctive pipes: smoother, lighter and sawable • For sale because of strategical redirection of selling company Completely new way of manufacturing • Use of Self-Compacting Concrete (SCC) – wet cast • High degree of automation • Good and clean working conditions • Leading to high quality pipes and unique products • Easy to cut to suit with notches • Remaining part can be re-used, no waste material • No butt, spigot or socket pipes required • Inside pipe wall is smooth because of wet instead of dry concrete: better flow of (waste) water • More than 20% lighter and thinner th ...

Vecoplan, not Lindner; Single-shaft shredder with feed hopper for refuse-derived fuel production, waste wood, waste and plastics, Material pusher to the rotor in the filling area Removal of contaminants from the pinball system, Screen inserts can be changed to your requirements! New rotor in 2017 with approx. 4000h running time New frequency converter in 2017 New service on the torque motor with 243kW, approx. 12900 operating hours in December 2023 Machine still under construction and available from February 2024 Subject to prior sale!

Metso 2000 shredder Opportunity for bale openers, bag openers, construction waste, bulky waste and containers! The right one for little money! Perfect for wheel loader loading or grabbing excavators! Electro-hydraulic drive With vibrating chute With control cabinet with Siemens touch panel Hydraulic power pack with hydraulic tank approx. 1000 liters with oil tank heating! Dismantling and loading from the site as is! Operating instructions 110kW electric motor

Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...

Cutting line Polar 176 XT-AT-Pace, year 2010 (cutting width 1760 mm / 69.29") The machine is in a good working condition, only 1.6 mio. Cuts PACE stands for POLAR Automation for Cutting Efficiency, whereby the loading, turning and waste disposal processes are automated. The Autoturn turning gripper in conjunction with the Autotrim high-speed cutter makes it possible to automate the first five cuts (all-round with separating cut). Equipment: Polar Autotrim 176 XT-AT, Autotrans M Format 7S, Autoturn, lowerable ruler left and right, rotating saddle, Compucut and P-Net possible, ErgoFront tables, various air tables and protective grids, etc. Available: immediately Suitable accessories are available immediately and can be purchased as an option: Transomat loader3 BL 160-7S incl. chip marker and counter ruler, year 2010 Transomat unloader ER 160-6, year 2010 Pres ...

Höcker shredder with waste compactor and conveyor belt • incl. waste compactor • incl. conveyor belt • Year of construction: 1991 • Type: Pacomat 2

Drum screen ZENO ZTS 2500, built in 2016, with warranty New drum screen. The machine was never put into operation. It is currently stored by the manufacturer Zeno. The drum screen is suitable for the separation of municipal waste, plastics, paper, Cardboard, wood waste. Specifications: Manufacturer: Zeno Type: ZTS 2500 Year of construction: 2016 Drive power: Electric motor 18.5 kW / 400V Capacity: 100-150 m3 per hour 3 levels of material separation: up to 80 mm, 80-320 mm, over 320 mm First separating stage: 0 - 80 mm Length: 6,250 mm Second separating stage: 80 - 320 mm Length: 3,750 mm Third separating stage: over 320 mm Working width: 2,500 mm Total length of drum screen: 10,000 mm Total machine length: approx. 12,000 mm Colour of the machine: RAL 6029 The scope of delivery includes: Feed hopper for feeding the drum screen via a conveyor belt Screen cov ...

The line consists of: briquetting press RUF 400 sawdust drum dryer auger belt conveyor - 2 pcs sorter with magazine screw conveyor - 6 pcs wet sawdust container fuel tank wood waste boiler wood waste crusher exhaust fan with cyclone packaging machine with compressor Year of last overhaul: 2023

KPM-400 model peeler: Working quickly and accurately with minimum waste, these three basic features are incorporated in our knife potato peeler KPM-400, the peeler that allows you to finely peel your potatoes in only two minutes. The special design of the peeling blades and baffles ensures a uniform distribution of the peeling action over the entire surface of the product, resulting in less waste. Skins are instantly disposed of by a water jet and collected in a filter to prevent floor drain from jamming. At the end of work, the peeling disc and filter are easily removed and cleaned for improved hygiene: an important aspect which, combined with fast operation and reliability makes KPM-400 and indispensable peeling unit for modern food processing. General Features: Bwhz3x0q • It is easy to discharge potato peel because it is discharged through a designated chute • Peeled ...

KPM-400 model peeler: Working quickly and accurately with minimum waste, these three basic features are incorporated in our knife potato peeler KPM-400, the peeler that allows you to finely peel your potatoes in only two minutes. The special design of the peeling blades and baffles ensures a uniform distribution of the peeling action over the entire surface of the product, resulting in less waste. Skins are instantly disposed of by a water jet and collected in a filter to prevent floor drain from jamming. At the end of work, the peeling disc and filter are easily removed and cleaned for improved hygiene: an important aspect which, combined with fast operation and reliability makes KPM-400 and indispensable peeling unit for modern food processing. General Features: • It is easy to discharge potato peel because it is discharged through designated chute • Peeled potatoes ca ...

Kronen TT450 Top and Tail machine 2011, stainless frame, ideal for removing the core of lettuce with flat stem (e.g. Frisee, Endive / Escarole, Romaine / Cos) and cutting leaf tips. automatic waste separation which can be perfected by appropriate waste and outfeed belt, 4000Kgs per hour, mobile, 3Ph

General SKU244U279 LocationBarneveld MakeAllgaier-Werle GmbH TypeTSM 2000/2 No.2450 Year of construction1982 Main Features MaterialMild steel/Stainless steel Surface2.5 m2 Sizes diameter1850 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface± 2,5 m² Number of sieve decks:2 Sieve sizesDia: 1850 mm With covercheck InletDia: 300 mm OutletDia: 190 mm Drive excentercheck Motor2,2 kW,220/380 Volt, 1410 rpm With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4301 (304) Information Total height1,65 m Weight1000 kg Floor space2,4x2,1 mMinerals & inorganicPlastic & rubberTumbler screening machinesPlastic & polymersSolid pharmaceuticsOther feedRubberAnimal feedOther chemicalStarchSugarE-waste & metalOrganicsOther pharmaceuticsGeneric medicinesPowdered foodsConsumer wastePaper & otherFeed additivesAllgaierIndust ...

Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The documentation (Manual, CE ...

Technical data shredder: Manufacturer Vecoplan AG Type VAZ 1100 XL K Year of construction 2014 Operating hours 1,224 hours Electromechanical drive Drive power 37 kW Speed 160 rpm Rotor length 1,070 mm Rotor diameter 370 mm 48 cutting crowns 40 x 40 mm Machine dimensions without hopper 2,550 x 1,900 x 1,110 mm (l x w x h) Weight 3,1 tonnes Application description of the manufacturer: The Vecoplan VAZ® 1100 K XL Rotary Shredder is designed especially for size reduction of difficult industrial materials such as plastics, dunnage, wood scrap, medical waste, municipal waste, furniture parts, pallets, carpet, cardboard and paper. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Crushing machine for shredding joinery and joinery waste, as well as Wood waste of many kinds Insertion dimensions: 600 x 800 mm Propulsion: 18.5 kW Photo shows the machine as returned by customer

Description: Technical details: liter output 20550/42 degrees Qa, coolant R134a/1430 refrigerator Pressure 20 bar, total power requirement 14.5 kW, additional information: The models in the HYFRA Gamma series are designed as immersion coolers for cooling water, oil and emulsion. The plug-and-play immersion coolers can be installed and can be used with an area requirement of just 0.5 m². This makes them very suitable for integration into various machine layouts. Outputs of up to 28 kW are available in just 0.5 m2 thanks to the compact design Stand space possible. This results in significant flexibility advantages when planning the production area layout and a significant increase in productivity because there is space for more producing machines. In the compact models of our immersion coolers, the condenser is installed horizontally. Thanks to this type of construction, the immersion coo ...

For cutting of cabbage, lettuce, leafy vegetable, etc. this extra information is standard for this model. Please always double-check the details during a visit The Kronen GS10 Vegetable and Fruit Cutting, Washing, and Blanching Machine, introduced in 2010, stands as a benchmark in food processing technology, offering unparalleled efficiency, precision, and versatility. This model seamlessly integrates cutting, washing, and blanching functionalities, catering to the diverse needs of modern food production facilities. Equipped with advanced cutting mechanisms, the GS10 excels in slicing vegetables and fruits with exceptional precision, ensuring uniformity and minimizing product waste. Its robust washing system utilizes state-of-the-art technology to thoroughly clean produce, removing contaminants and impurities to uphold stringent food safety standards. The blanching feature of ...

For cutting of cabbage, lettuce, leafy vegetable, etc. High to medium capacity this extra information is standard for this model. Please always double-check the details during a visit The Eillert G3300VS Vegetable and Fruit Cutting, Washing, and Blanching Machine, introduced in 1995, marked a significant advancement in food processing technology. This model seamlessly integrates cutting, washing, and blanching functions, streamlining production processes for enhanced efficiency and quality. Featuring precision cutting mechanisms, the G3300VS effectively slices vegetables and fruits of varying shapes and sizes, ensuring uniformity and minimizing product waste. Its robust washing system thoroughly cleans produce, removing dirt, debris, and contaminants to meet stringent food safety standards. The blanching capability of the machine rapidly heats produce, halting enzymatic ac ...

Cat-Nr. 12-2260 new Sugar Dissolving Tank with Cooling and Heating Jacket, with Insulation - 50.492 Litres in AISI 304 Product Thickness: 1,4 kg / Ltr – 65°C Working Pressure: pressureless Capacity: 50.492 Litres Material: V2A - AISI 304 Surface: 2B welding inside polished Insulation: in mineral wool thickness = 50 mm, completely in stainless steel and welded Thermoplate/Cooling Jacket H=5500 mm Thickness: 2.0 mm Working Pressure (Thermoplate/Cooling Jacket): max. + 3.0 bar – Medium: Water Upper and Lower Bottom: conical shape With manhole lid Diameter: 500 mm With inlet and outlet air controll With level indicator with borosilicate, scale With sample valve With spray head diameter 65 mm demountable with CIP pipe till the bottom of the cylinder + thread connector NW 80 With butterfly valve DN 65 for clear outlet With butterfly valve DN 65 for waste ou ...

Lauber Energy Use Centre for 4 containers. The plant is abandoned due to conversion of the production. We replace our steam engine with a turbine, which is why most of the waste heat is eliminated. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) The system consists of: Intake hopper for air incl. dust filter Blower unit Heater 370kW Funnel for air flow incl. 4 shut ...

Stock number: U2110-1 Used decanter centrifuge by KHD HUMBOLD WEDAG type S3-2, designed in stainless steel AISI 304. Machine has bowl with internal diameter of scroll 610 mm and is driven by 37 kW electric motor. Maximum rotation speed of bowl 2050 rpm. Unit also is equipped with hydraulic pump and is installed on carbon steel frame. Machine had been designed for work on waste waters. With machine are included spare carbon steel bowl, gearbox and electric motor. Not included control panel and documentation.

? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...

various small paddle puller for waste sorting of cutting goods by a conveyor belt. Driven by an electric motor. Pumping height approx. 1.000 mm, adjustable. Very powerful, up to 80 cycles/min

The following completely reconditioned and ready compact system of SEPARATORS & SERVICE T.D. is for sale. This selfcleaning separator WSPX 303TGP-71 is clean mainly used water-based coolant, for the concentration of washing liquids like lye also waste water or rain water cleaning. The maximum hydraulic throughput capacity is 1500 l / h. The engine is a two-pole motor with 50 Hz 2.2 kW. The drum has a speed of 9516 RPM 69 DB (A). Control water consumption is 0.5 l / emissions per output. Sediment volume ca: 0.63 liters. Output of min 0.8 liters, max 0.9 litres. The separation is carried out in the separator drum which is driven by the electric motor via a flat belt. The separator can be used as a concentrator with a large heavy phase (E.g. water) and a small stage (E.g., oil), as well as the light phase. The separator can be used as well as cleaning separator (Klarifikator) with o ...

Technical data: hydraulic undertable circular saw unit - drive power motor 7.5 kW- diameter saw blade Z=48x5 600 mm- diameter saw blade bore 30 mm- inclined working table Yes- Automatic rotation of the table -70C 0C+70C- Speed of rotation from / to 0C / 70 C 3s- Positioning accuracy +/- 0.2C- Pneumatic workpiece holder 2 pieces- Pneumatic side organizers 2 pieces- Safety cover via capping unit Yes- Cutting capacity at 0C: 160 x 310 mm, 80 x 390 mm- cutting capacity at 45C: 160 x 220 mm, 80 x 270 mm cutting capacity at 70C: 160 x 90 mm, 80 x 130 mm- minimum workpiece thickness 10 mm connection values - supply voltage 400 V / 50 Hz- Control voltage 24 V compressed air requirement at 8 bar per cycle approx. 8 Nl- Suction nozzle FI100 mm 2 pieces- Suction nozzle FI160 mm 1 piece- air speed Suction in center of nozzle approx. 25-35 m/s Electronically controlled slider:- Loading length: 6000 m ...

Used pressure leave filter, made by Padovan, type G10. -filtration surface 10 m2 -filter surface for waste liquid 0,46 m2 -24 filter plates with 745 mm diameter for liquid -6 filter plates with 330 mm diameter for cake -maximal cake thickness 22 mm, volume 216 dm3 -total chamber volume 655 L -working pressure 6 bar -nominal capacity 20.000 L/h -installed power 7,5 kW -dozing pump -rotary motor 4 kW -overall diamesions: lenght 2350 mm, width 1700mm, height 2100 mm

Rated power up to 300 kg/h engine power Drive motor 0.37 (0.5) Washing machine motor 0.12 (0.16) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 1280 mm width 870 mm He he 1350 mm 65 mm width 350 mm Band length 4900 mm application width 240 mm Application shoehe 0-50 (infinite) mm Weight 350 kg Material 1.4301 / AISI 304 Juice yield up to 75% Band speed 2 m/min Contact time 1 min Water consumption for cleaning 2 l/ min Connection for waste water 48.3mm Connection for juice drain 1 High juice drain 420 mm High sewage drain 120 mm Hoehe marc ejection 700 mm ; New machine - best condition

Mercury vapor lights to illuminate large halls Manufacturer: May Type: HQ 10/250 Technical data: Power: 250 Watts Voltage: 230 Volt Frequency: 50 Hz Lamps are waste. Therefore, these are inexpensive to make. They are fully functional and in very good condition!

REVERS OSMOSIS APPLICATIONS: MILK CONCENTRATION, WHEY CONCENTRATION, WASTE WATER CONCENTRATION STRAINED YOGURT, QUARK, CAPACITIY: FROM 5.000 LT TO 50.000 LT PER HOUR FULLY AUTOMATION CONTROLLED WITH PLC AND TOUCH SCREE PANEL TURN KEY PROJECTS

Rated power up to 3000 kg/h engine power Drive motor 2.2 (3.0) Washing machine motor 0.37 (0.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 3035 mm width 2080 mm He he 1690 mm Width 1200 mm Band length 9950 mm application width 900 mm application shoehe 0-65 (5 steps) mm Weight 2500 kg material 1.4301 / AISI 304 Juice yield up to 75% Band speed 0.5-3.5 m/min Contact time 2-11 min Water consumption for Cleaning 6 l/min Connection for waste water 76.1mm Connection for juice drain 11.2 High-gasning 400 mm High-speed wastewater drain 250 mm Hoehe marc ejection 880 mm Supplied high-pressure cleaner, compressor ; New machine - best condition

Complete sawmill for production of about 100.000 m³/1 shift operation. Complete mill including infeed, debarking machine, scanner, canter sidebordsaw edger, curve saw equip,ment, waste disposal, stacking machine for main boards. Complete electric including 2 scanner type A-Vector. Simply complete mill

S5 - used 50 m³ / 50,000 litre steel tank, underground tank, firefighting water tank, water Container, water tank. In good condition, as underground tank or for aboveground use, steel tank, storage tank, water tank, firefighting water tank. Exterior with a new coat of bitumen. volume: 50 m³ / 50,000 litres material: stainless steel tank, single-walled dimensions: appr. 2.5 m diameter x 10.0 m length weight: appr. 8.0-10.0 t The container is used, emptied inside and has been professionally cleaned. According to the age traces of use are present. The container could be used as storage tank for water, waste water, sewage, liquid manure, seeping juice, canola oil, rain collection tank, water cistern, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update a ...

Rated power up to 1500 kg/h engine power drive motor 0.55 (0.75) washing machine motor 0.12 (0.16) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2538 mm width 1463 mm He 1460 mm mm width 650 mm Band length 8120 mm application width 450 mm application shoehe 0-50 (infinite) mm Weight 1060 kg material 1.4301 / AISI 304 Juice yield up to 75% Band speed 0.9 - 1.8 m/min Contact time 1.9 - 3.8 min Water consumption for cleaning 3 l/min Connection for waste water 75mm Connection for juice drain 2 High juice drain 400 mm Hoehe wastewater drain 210 mm Hoehe marc ejection 840 mm Supplied high pressure cleaner, compressor ; New machine - best condition

Rated power: up to 7000 kg/h Electrical connection: 3 kW 400V 50Hz (3 phases) Electrical fuse: 16 A traege Dimensions dimensions: Laenge: 4 435 mm Width: 2 250 mm Height: 2 160 mm output or drop-in height: 1 430 mm Width: 1 100 mm 320 - 870 mm Application shoehe (infinitely adjustable): 10 - 50 mm Weight: 3 400 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Band speed: 1.2 - 4.5 m/min Contact time: 1.5 - 6 min Water consumption for Cleaning: 20 l/min (in continuous operation cleaner) Connection: Connection for waste water: 75 mm Connection for juice drain: DN 40 He juice drain: 200 mm High sewage drain: 100 mm Hoehe Marce ejection: 800 mm usable for core and stone fruit Scope of delivery: high-pressure cleaner, compressor Incl. New machine - top condition

1 PAAL horizontal tunel press type PAC, year 1997, tunel section 60 x 70 cm, bale measuring, tying through 4 horizontal wire insertion, machine was used for pressing textile waste dust, with dust suplying cyclone, by removing dust cyclone it can be used for pressing any material

Rated power: up to 3000 kg/h Electrical connection: 3.5 kW 400V 50Hz (3 phases) Electrical fuse: 16 A traege Dimensions: Laenge: 3 720 mm Width: 1 730 mm Height: 2 110 mm output or drop-in height: 1 430 mm Width: 660 mm 220 - 440 mm Application shoehe (infinitely adjustable): 10 - 40 mm Weight: 2 200 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Band speed: 1.2 - 4.5 m/min Contact time: 1.4 - 4.2 m inWater consumption for Cleaning: 10 l/min (in continuous operation cleaner) Connection: Connection for waste water: 75 mm Connection for juice drain: DN 25 High juice drain: 130 mm Hoehe sewage drain: 50 mm Hoehe Marce ejection: 810 mm usable for core and stone fruit Supplied: high-pressure cleaner, compressor Incl. New machine - best condition

Rated power: up to 1000 kg/h engine power: engine: 0.75 kW buster cleaning: 0.37 kW high pressure cleaner: 4.7 kW Electrical connection: 400V 50Hz (3 phases) Electrical fuse: 16 A Dimensions: Laenge: 2 145 mm Width: 1 270 mmhoe height: 1 290 mm d drop-off height: 1 290 mm Width: 580 mm Application width: 240 - 460 mm application shoehe (9 steps): 10 - 50 mm Weight: 665 kg Material: 1.4301 / AISI 304 Juice yield: up to 75% band speed (infinite): 2.1 - 5.5 m/min Throughltime: 0.6 - 1.6 min Water consumption for cleaning: 3 l/min Connection: Connection for waste water: DN75 Connection for juice drain: 1 1/2 He juice drain: 305 mm High water flow: 86 mm High disarmer discharge: 745 mm usable for core and stone fruit Supplied New machine - best condition

Motor rating 0,5 (0,7) kW (PS) Connected load 400V 50Hz (3-phase) Electrical protection 16 A Nominal rating max. 400 bottles/h Length 780 mm Width 550 mm Height 1210 mm Weight 80 kg Material 1.4301 / AISI 304 brushes from polyamide Pressure max. 3,5 bar Connection for cleaning AG-1/2\" (Gardena) water temperature max. 30° C Connection for waste water PVC-Schlauch inside Fi45mm, outside Fi50mm ; new machine - top condition

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 550 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

This machine is particularly suitable for the processing of electrical waste with PVC and rubber. Diameter range 2 - 115 mm Cutting speed 35 meters per minute Weight 350 kg

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 650 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

CA 1962 Rotation slot - and die-cutting machine, strength of cardboard: 0,5-4 mm, thickness of the corrugated board: 3-7 mm, capacity (speed): until 3600 single cuts per hour, slots and booklet edge at side performed in a single pass, soil or cover can in one Operation individually, and with Zentralo cut twice, produced, additional delivery one cutting and creasing device can corrugated cardboard in a single punched, slotted, and grooved in one direction and cropped, automatic Waste ejection device, line 5301, Max: 1300x1200mm, min: 250 mm, 3600/hours

BTS-Bottle Crusher The BTS-Glass Crusher is ideal for crushing glass bottles in the beverage, glass industry and gastronomy. The volume of up to 100 beer bottles, wine and champagne bottles also other one way glass bottles can be crushed user-friendly up to 90% per minute. The glass bottle crusher impresses with its easy operation, throughput and large filling volume. - Volume reduction up to 80% - Reduces frequency of waste collection - Useable for beer, wine, champagne bottles and other one way glass bottles - Small foot print - Safe and easy to operate - Clean and safe work environment - CE-certified - Quality product Made in Europe Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x D): 1850 x 965 x 832 mm Transportation height: 1850 mm Machine weight: 315 kg Volume reduction up to: 80 % Suitable for bins up to: 240 Ltr

Safety railing clamp for screwing Safety on every structure These tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success. Doka handrail posts provide comprehensive safety • against fall hazards • on the structure and the formwork • thanks to their high quality (hot-dip galvanised) • conform to EN 13374 Class A Convenient and easy to mount Multi-functional as they can be used in many different situations ? maximum safety with easy assembly ? no squared timber waste

Chromium Plating Technology The Modern chromium plating technology. The year 2009 and is in service since then in single-shift model. The type of chromium is hexavalent. The line is equipped with automatic transport system for moving of girders among the tanks within the line lengthways and crosswise. There is as well a powerful ventilation system installed above the production line. The Basic purpose of investment is chrom plating of towel radiators of various types and dimensions. The Average quantity is 2 pcs. of radiators per girder. The Maximum product size for application is 2.000 mm in length, 1.400 mm height and up to 250 mm width. Capacity The planned capacity of the technology in two work-shifts is about 25.000 PCs. Per year. The cycle time per girder achieves 12 minutes. There is as well a possibility of capacity increase due to installing of additional chemical tanks with ...

Qty. 1 Second-hand cut-to-length line Mfc.: FIMI, SSW Type: Multiblanks line 1850x2.5 Built: 1995 Stopped: Strip width: 300 – 1850 mm Thickness: 0.3 – 2.5 mm Length: 300-8000 mm Line speed: 85 m/min. Coil weight: 22.5 T Scope of supply: 1. Load coil 25 ton 2. Coils centering 3. 25 ton unwind rod 4. Wire guide photocell 5. Table introduction aprirotolo 6. Group introduction 7. Cutter fly shear 8. 6° FIMI straightener 9. Apply film 10. Circular shear 11. Deceleration/Connection table 12. Wrap waste 13. Ansa passage table 14. Measurement wheel 15. Unique rotary shear 16. First evacuation conveyor 17. Second conveyor for evacuation 18. Scrap unit 19. Autom. wagon for pallet insertion 20. Stacker with palette and air breath 21. Evacuation chain with weight and semi-automatic strapping machine 22. Second evacuation chain 23. Hydraulic units 24. Electrical pan ...

Description Brand ESMACH Model FOR 3C ID 7256 Status Active Year of manufacture 2006 Location Oradea (RO) Moulder for rolled bread ESMACH FOR 3C manufactured in 2006, with 3 cylinders pre-arranged for manual loading with chute for pieces return. Double anti-waste device, adjustable through micro-metric steering, enabling two pieces to be processed simultaneously, stop device for the upper belt, output performance: 20 to 1200 g. ExWorks. Price is negotiable. Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. Hablamos Español. Beszélünk magyarul. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Baader 142 - The Ripper Machine for vacuum evisceration of salmon, trout Released: 1998, 1999 Condition: excellent This Baader 142 machine is designed to eviscerating salmon, trout weighing from 1.3 kg to 11 kg (head or without). The fish being processed is loaded into the machine by hand. A strong clip captures the carcass from the tail for further transportation. The fish is then measured using electronic sensors to help determine the location of the cut. The cutting mechanism is controlled by sensors and the computer, it produces a careful, symmetrical cut, which does not affect the insides. The insides are removed by means of a vacuum device. Processed fish weighing from 1.3 to 11 kg Performance: 16 fish/min Vacuum pumps and waste tanks included