waste used for sale

TECHNICAL SPECIFICATIONS Manufacturer: BHS Sonthofen Designation: Pre-ripper Type: VSR 1215 Version: Twin-shaft shredder / rotor shear Year of construction: 2018 Rotor diameter x length: 530 x 1,500 mm Operating hours: approx. 500 h Drive power: 2 x 90 kW Rotor speed (max.): 16 - 37 RPM Nominal torque: 33,000 Nm Number of tearing tools: 8 pcs. Width of tearing tools: 80 mm Total weight: approx. 22,000 kg SPECIFIC COMMENT - Incl. control cabinet/control - Incl. hydraulic pressure unit - Incl. steel substructure - Warranty for approx. 500 Bh - Shredding of domestic, commercial, bulky waste, waste wood, e-waste, plastics,...

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

As good as new plant for sale Air sifting for substitute fuel, mixed construction waste, bulky waste, household waste Facility can be visited by appointment! Few operating hours Subject to prior sale!

Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new.

Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.

ZWKPAK2_M2 - Toilet paper packing machine With pallet wrapping machine The machine is designed for packing rolls of toilet paper in unit packages prepared, delivered by suppliers fastened in packages. The work takes place in an automatic cycle and does not require special skills from the operator. After starting the machine, the operators task is to arrange packages of bags in warehouses: - double current from which bags will be taken during packing, and - double auxiliary designed for quick substitution of packaging to be picked up by the machine after exhaustion of packaging in previously used warehouses of the machine. Replacing warehouses is extremely simple, it consists in moving from one position of the table with warehouses to another. A skilled operator will perform this activity without stopping the production process. Rolls of toilet paper are moved with tape to th ...

Chopper/shredder/shredder to crush by Carpentry waste, carpentry waste, pallets and wood waste of many kinds. Propulsion: 15 kW Insertion dimensions: 800 x 1000 mm Workshop tested in good condition

Technical data single-deck ballistic separator for three separation fractions: Manufacturer Lubo Screening & Recycling Systems B.V. Type Elliptical 10EBB05 Year of construction 2015 Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kg Note on the separation process: The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans. Condition of the machine: The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in ...

3pcs SDMO X880TD , MTU 12V2000 G65, year 2012, diesel, only 18h operating hours, plate heat exchanger for waste heat recovery 1pc SDMO X1000KTB, MTU16V2000, YOC 2007, diesel, only 29h operating hours, plate heat exchanger for waste heat recovery 1pc SDMO XS715, MTU12V2000, built in 2002, diesel, only 25h operating hours, plate heat exchanger for waste heat recovery

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

We have for sale a Vacuum Evaporation Plant: The plant consists of: -3-stage vacuum evaporation system VV 75 KDB -Down-flow evaporator Condest 13 K-Niro Technical details available upon request. Vacuum evaporation is a process that has been used by the large-scale chemical industry for decades. Using vacuum evaporation systems allowed (for the first time) utilizing the advantages of this process also in small and medium-scale applications. Vacuum evaporation systems have been developed specifically for the metal machining industry as well as for applications in the field of environmental protection. It is used to treat under vacuum aqueous solutions that contain pollutants. Typical fields of application include: - Recover electrolytes from electroplating - Keeping a uniform rinsing water quality in static rinsing tanks - Volume reduction of sewage wate ...

P12 - used appr. 30 m³ / 30,000 litres PE-tank, plastic tank / flat bottom tank, double-walled, former chemical tank, in good condition. capacity: 30 m³ / 30,000 litres diameter inside: appr. 3.00 m outer dimensions: appr. 3.48 m x 4.80 m overall height Double-walled, (i.e. with an outer hull), non-translucid, various connections such as ventilation, inlet, outlet, etc., lid on top of the roof. For transportation the different attachments, level indicator, probes, pipes, etc. will be dismantled and are supplied along with tank. Former hydrochloric acid 31% tank Chemical tank for hydrochloric acid, sulphuric acid, methylated, ironIIIchlorid, formic acid, hydrogen peroxide, acetic acid, etc. The tank's size makes it perfect for placement inside a shed or barn, as a storage tank for water, waste water, sewage, seeping juice, manure, AHL/ASL etc. High-quality plastic t ...

P18 - used appr. 30 m³ / 30,000 litres PE-tank, plastic tank / flat bottom tank, double-walled, former chemical tank, in good condition. capacity: 30 m³ / 30,000 litres diameter inside: appr. 3.00 m outer dimensions: appr. 3.48 m x 4.80 m overall height Double-walled, (i.e. with an outer hull), non-translucid, various connections such as ventilation, inlet, outlet, etc., lid on top of the roof. For transportation the different attachments, level indicator, probes, pipes, etc. will be dismantled and are supplied along with tank. Former hydrochloric acid 35% tank Chemical tank for hydrochloric acid, sulphuric acid, methylated, ironIIIchlorid, formic acid, hydrogen peroxide, acetic acid, etc. The tank's size makes it perfect for placement inside a shed or barn, as a storage tank for water, waste water, sewage, seeping juice, manure, AHL/ASL etc. High-quality plastic t ...

Tractor drive from 50KW, optionally with continuous or Variogetriebe, ca 500 PCs around the world,... Perfect compost quality in economic operation, over 20 years experience! For green waste, organic waste, contaminated soil, sewage sludge utilization, drying of biomass...

Waste Baler BTS-MF450 The BTS-MF450 Waste Baler is ideal for compacting loose cardboard, paper and film. By compacting these recyclable materials users receive a volume reduction of up to 90% and this saves disposal costs. The baling press impresses with its ease of use and large filling volume. The finished bales can be easily removed from the baler with the automatic bale ejector. - Bale weight output of up to 450 kg - Suitable for baling of cardboard, film, clothes, cans, Big Bags and many materials more - Automatic bale cycle - Retaining claws to prevent spring back - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power supply: 380-400 V (3 Phase) Machine size (H x W x D): 3000 x 1781 x 1196 mm Transportation height: 2300 mm Machine we ...

Multi Chamber Waste Baler Baler BTS-MF75MK The BTS-75MK and BTS-MF200MK Multi Chamber Waste Baler are ideal for compacting loose cardboard, paper and film. Different materials can be collected in two or more chambers. As soon as a chamber is filled the mobile compaction head will be moved over the chamber and material can be compacted into a bale. Users receive a high volume reduction up to 90%. - Solid bales with bale weight up to 75 kg - Suitable for baling of cardboard, film, clothes and many materials more - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Roller guided head for ease of movement - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 1969 x 2050 x 872 mm Transportation  ...

Multi Chamber Waste Baler BTS-MF200MK The BTS-75MK and BTS-MF200MK Multi Chamber Waste Baler are ideal for compacting loose cardboard, paper and film. Different materials can be collected in two or more chambers. As soon as a chamber is filled the mobile compaction head will be moved over the chamber and material can be compacted into a bale. Users receive a high volume reduction up to 90% - Solid bales with bale weight up to 200 kg - Suitable for baling of cardboard, film, clothes and many materials more - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Roller guided head for ease of movement - Fully automated bale ejector simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force:16 Ton Motor: 2.2 kW 16 Amp Power suppl: 220-240 V (1 Phase) Machine siz ...

Sieve Drum Waste Waste Product Drum Sieve Machine Screening System 2.24 m Diameter 7.5 Kw Stainless Steel Enclosure used Manufacturer: Lohse Total length: approx. 6337 mm Drum diameter: 2240 mm Height: approx. 4807 mm Plant width: approx. 3400 mm Sorting screen plate 1st zone: 8x60 mm Sorting screen plate 2nd zone: 6x40 mm Operating weight (filled): approx. 11000 kg Empty weight complete: approx. 9500 kg Drum housing is made of stainless steel, screen basket iron Motor data - drum drive Three-phase motor type R93DV 132M4 Power: 7.5 kW Engine speed: 1430 rpm Drive speed: 25 rpm Speed drum: 10 rpm Connection: 230/400 V Rated current: 16 A Frequency: 50 Hz Protection: IP54 Design: B3 The sieve drum has already been dismantled and cleaned. Item location 01587 Riesa, visit possible.

Horizontal vacuum bucket dryer mixer Knea dryer 7000 ltr. Used Double-walled vacuum mixer/dryer with heated wall and heated inner tube. With outlet opening, filling dome and service lid, for efficient drying, thickening of products and (contaminated) waste sludge waste. Built: 1997, is currently being regenerated Volume: 7,000 litres Temperature: 151°C Pressure / vacuum 5 bar / - 1 bar (according to pressure gauge), vacuum pump and electric boiler can be offered, as well as up to the customer-specific system Gearbox output speed: approx. 42 rpm (i = 32.8) Transmission power (1,400 rpm): 50 kW Mixer chamber: approx. 1,600 x L 4,400 mm Total dimensions: approx. 6,600 x 2,200 x 3,600 mm Changes and errors in the technical data, data and prices and intermediate sale reserved.

Ceetec's new A250 paint machine is here! As an official and exclusive sales partner for the German-speaking region, I am pleased to present our latest model to you. After almost 50 years of construction of the previous model since the beginning of the 1970s (better known as the GORI brush machine), the new model is now an extensive update with extended applications. Who is this machine suitable for? - Carpentry /carpentry that manufactures carports, facades, terraces, garden houses, etc. - Wood industry companies that paint, read or impregnate industrial boards / beams / slabs etc. Technical data: max. workpiece height: 250mm max. workpiece width: 250mm (or 380mm = Ceetec A380) Speed: 16-42m/min Connection: 400V / 1.5kw Benefits ggü. simple spray painting: 1. The wood protection is massaged evenly into all pores, which ensures a high resistance. 2. Different su ...

Cleaning plant for die casting emulsion, process wastewater treatment, waste water treatment used Manufacturer: VIBROCHEMICA / ROOS & Co Type: 1000 CA/1 Built: 2006 Power requirement: 1 kW Dimensions: approx. M The system includes the cloth belt filter / gravity filter with slitting system and tank, oil skimmer, collection tank with agitator and liquid detectors. The plant is used for the treatment of die-cast emulsion waste water and was in operation until the production site was completely dismantled.

Waste Recovery Machine (Opener and Fine Cleaner) OFC machine Year 2018 Model REA 120 Made in EU The function and process: The machine may be used for processing of: -virgin cotton, -cotton wastes, -Jute wastes, -hemp, -linen and other long or short staple fibers. -production capacity is to process 300kg of material per hour The long fibers are cottonized at the entry to the machine, it means the fibers are cut to the short staple length. With the REA – 120 OFC machines can recover up to 85% of LINT may be returned to the process as regenerated fibers. Please note: Rags cannot be opened on this machine. The machine's max. capacity is to process 300kg of material per hour. If we make a basic conservative calculation, we may calculate 250 kg of material per hour and we will obtain approx. 210 kg of good fibers out of that quantity. Calculating one turn of  ...

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

Multi-blade saw Paul K 34 O Complete cutting system with Paul 18 E cross-cut saw and K 34 O/800 GL multi-blade saw Year of construction: 12/1998 -Chain conveyor with lifting platform -Roller conveyor -Cross-cut saw Paul Type 18 E, 12.5 kW -Conveyor belt -Defect roller -Ejection station for cuts -Waste conveyor belt -Roller conveyor -Centering -Multi-blade saw Paul Type K 34 O/800GL, 90 kW, Working width 800 mm, saw blade diameter. 210 mm, 5200 rpm, Synchronisation machine, shaft diameter 60 mm Drip tray Roller conveyor Hydraulic pump 5.5 kW, Miscellaneous 5 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 50 mm Input lengths on the cross-cut saw: 1000 mm to 5000 mm or more Multi-blade saw: 350 mm to 10 ...

Multi-chamber press C400 | C600 | C800 C400 (with two pressing chambers) C600 (with three pressing chambers) C800 (with four pressing chambers) Specifications: Motor 1,5kW Electronic voltage 230V/50Hz/1-F. Maximum pressing force 6.5t Working pressure 150bar Cylinder stroke 700mm Time press cycle 50s Press chamber (LxWxH) 730x600x830mm Insertion height 1060mm Insertion opening (LxW) 730x600mm package size (LxWxH) 730x600x400mm Package weight 30-40kg Binding rolls 8x6x4x Strap type (polyester) 9mm/250m Number of containers 4x3x2x Length ges. 3455m; 2615mm; 1775mm; 17775mm Width ges. 1050mm Height ges. 1955mm Weight ges. 1955mm Weight ges. 1090kg; 880kg; 670kg; 510kg Transport dimensions C400 !x container Length 1680 mm 840 mm Width 845 mm 845 mm Height 1955 mm 1060 mm Weight ges. 210 kg Multi-chamber press C400 (with two pressing chambers) C600 ( ...

with Freeflow Printserver and Clear Toner M. No.: 3130055185 Counter (m): 7.3 Colors: 4 + varnishes Format : A7 – A3+ (SRA3) Equipment / Additional information: Image Resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print Speeds—AWM • 80/100 ppm (8.5" x 11"/A4 letter), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 4800/6000 full process color A4 (letter) 4/0 impressions per hour • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 tabloid) 4/0 impressions per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper Format/Sizes • Maximum Sheet Size: 13" x 19.2" (330 x 488 mm) • Minimum Sheet Size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit supports for 4" x 6" (102 mm x 152 mm); see Optional High Capacity Feeder • Maximum Print Area: 12.83" x 19.05" (326 mm  ...

Nilfisk R154 Vacuum Cleaner R154V 5PP Industrial Vacuum Cleaner Vacuum Cleaner 400V, R154V, 114 Liters Cleaner Cleaning Disposal R-Series was developed for extraction of waste residues, cutting dust and production waste impresses with simple control and easy removal of the suction material flexibly movable thanks to rollers and two side handles Year of construction: 2020 Manufacturer's information on technical data: Item number: 4031600077 Voltage (V): 400 Frequency (Hz): 50 IP protection class: 55 Protection class: F Container volume (l): 114 Main filter type: NYLON MOD. R460 Main filter area (cm²): 11,500 Inlet (mm): 50 Weight (kg): 40 Input power (kW): 1.1 External dimensions: approx. 112 cm high approx. 60 cm wide (from handle to handle) EAN: 5711141081777 was officially tested for flawless functionality in 2020 after construc ...

Fully automatic optimization and sorting system for wood friezes, hard and softwood Plant is for sale due to cessation of operation. Plant was only in use for 1/2 year. Equipment of the plant: 2 pieces bunker/silo loading Collection Division into 2 parallel lines Sorting out waste Merge/isolate scanners Feeder WoodEye SortCut Scanner Scanner WoodEye SortCut Equipment: 4-sided profile measurement 4-sided fiber/texture analysis/angle measurement for hardwood and softwood Parallel division into 1.) to the optimization line or 2.) to the sorting line Equipment 1.) Optimization line: Equipment 2.) Sorting line: Fully automatic sorting of friezes in 2 sorting lines with a total of 6 sortings + 2 x waste and subdimensions Fully automatic feeding of the sorting stations Fully automatic exchange of sorting boxes full/empty Fully automatic output and coding of the full sortin ...

Hello, I have a chipper for sale with a 6-cylinder John Deere engine, about 250 HP The chipper, despite its age and appearance, is fully operational. Its strong advantage is its very simple structure. It does not require a complicated service for simple repairs. The same applies to the operation, which is very intuitive. A chipper for a wide variety of needs: - Various types of wood waste - The cuts - Pallets - The bark - blocks, waste - and many others Capacity about 80 m3 / h depending on the material, operator efficiency, type of material and sieves It is possible to install different sizes of screens depending on the needs The wide charging with dimensions of 4.10m x 1.90m allows you to backfill even with very large loaders The working width of the roller is 1.45 m and the sieves have a mesh size of 8 cm x 8 cm. Chippers of this type and power, regardless of age, kee ...

Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional

Packaging machine Beck Series Packer S 1732 - Used equipment built in 1986 -Operational The machine is equipped with a photo-electric control and regulates the work rhythm depending on the length of the packaged goods. This allows unequal parts to be packed in any order. The height and side adjustment of the machine takes place in seconds by means of a hand wheel. Functioning The machine works cycle by cycle, fully automatically with photo-electric control. The goods to be packed are introduced into the machine by means of a special infeed belt and shrink-wrapped on four sides. Oil hydraulics ensure exact operation of the welding system. The welding is carried out according to the impulse separation welding process and can be equipped with additional special welding elements. Odour nuisances are avoided by means of an exact, infinitely variable temperature adjustment of the w ...

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.

Hello, I will sell a powerful chipper of the German brand Willibald SR 5000 The engine of the reputable company MAN - 460 hp. These engines are distinguished by cheaper operation compared to concretions Year 1998 The chipper is in almost perfect condition for its age. The chipper is very well maintained in technical terms, I add a lot of expensive parts to the machine as well as all the documentation to facilitate the service of the chipper. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. Very easy access to the engine and other components thanks to the lifted hatch. The same applies to the operation, which is highly intuitive. A chipper for a very diverse demand: - Various types of wood waste - Carps, Carps - Zrzyny - Pallets - blocks, waste - hay, straw (after changing knives) - and many others Efficiency  ...

Hello I will sell a powerful chipper of the American brand Rotochopper model MC-166 Engine from a reputable company CAT 3406 - 360 HP. The chipper, despite its age and appearance, is fully functional. Its strong advantage is a very simple construction. It does not require complicated service for simple repairs. The same applies to the operation, which is highly intuitive. Drum-knife chipper for very diverse needs: - Wood, whole logs. - Various types of wood waste - tree trunks, stumps -Cuts - Pallets (It has a magnetic roller that captures metal) - blocks, waste - and many others Capacity approx. 90 m3/h depending on material, operator efficiency, type of material and screens. It has a mounted magnetic wheel that will allow you to get rid of metal parts from the material. It is possible to install different sizes of sieves depending on the needs. The wide hopper ...

Brodpol pallet board production line We present a complete line for the production of pallet boards from the Polish manufacturer BRODPOL A line of fully automatic disc sawmills installed and perfected for production. The rope is installed higher, while the entire conveyor belt infrastructure transfers the material between the individual operations, and the waste goes to the chipper. The line consists of Cross feeder with cascade for feeding round wood 4 m Longitudinal feeder before fitting Brodpol TT 5/600/400G fitting. Installed power 166.1kw 3.1. The flis falls into the transport towards the chipper 3.2. The side planks fall on the cross conveyors and are transferred to the off-cutting machine 3.3. The pile is transferred to the centering table in front of the multi-rip saw. 4.WP-165 Double Spindle Multi Rip Saw Installed Mac 132.2kw Cross conveyors dump ...

Cross-flow scraper mobile version for the treatment of mixed waste fractions (municipal waste, biowaste, scrap metal, packaging, etc.) - Material input via vibrating chute - Efficient shredding in QSZ (1,600 mm) - Material transport via discharge belt below QSZ - Material discharge via conveyor belt (foldable) - Metal sorting by means of an overbelt magnet (neodymium) - Hook lift holder for transport - Motor power: 160 kW, 50 Hz, 400 V -Material discharge: screen discharge made of wear-resistant steel, screen plates are individually replaceable, Various hole geometries and sizes possible, external discharge box with flange connection for dust extraction - Contaminant discharge: discharge opening with hydraulically operated slider, incl. hydraulic unit and inductive end position sensors - percussion mechanism: chain mounting system for the use of up to fou ...

Kronen TT450 Top and Tail machine Serial: 164 2011, stainless frame, ideal for removing the core of lettuce with flat stem (e.g. Frisee, Endive / Escarole, Romaine / Cos) and cutting leaf tips. automatic waste separation which can be perfected by appropriate waste and outfeed belt, 4000Kgs per hour, mobile, 3Ph

For sale are many components of the former company Viking Heatengines. A large bundle of machines and spare parts used and new. As well as a container facility. The CraftEngine can be operated with any waste heat source, to generate electricity. The CraftEngine™ can perform heat already below 100 °C and from approx. 50 kW and thus offers a variety of applications for waste heat recovery.

Technical data bale opener and dewiring line with weighing system Bale feeding belt, pos. 1: Belt length 11,000 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 7,000 kg Conveying speed 0.2 m/second Drive power 3 kW Pitch of idlers 250 mm Side wall height in feed area 70 mm Side wall height impact wall 1,000 mm Feed height 1,800 mm Industrial weighing system for the bale feeding belt (additional equipment): Weighing terminal type IT1 Ethernet 8 pieces of calibratable load cells with wishbones and a nominal load of 2,200 kg/each Preload of the system 5,000 kg Feed belt to bale opener and dewirer, pos. 2: Belt length 9,500 mm Width between side parts 1,460 mm Belt width 1,200 mm Max. Load 6,000 kg Conveying speed 0.25 m/second Drive power 9 kW Pitch of idlers 250 mm Side wall height 800 mm Pitch 13 Bale opener and dewiring station, pos. 3: Type B/E 3213 Year of manufactur ...

The main components in this installation is the natural gas engine: - Jenbacher engine 620 - Year 2021 - Running hours: 2,981 hours. - Fuel: Natural gas The full list of the equipment included in the scope is the next: MAIN PARTS – ENGINE Jenbacher 620 F 3,358 kWe YEAR 2021 – 2,981 running hours – GENERATOR AVK 6,3KV 50HZ – WASTE HEAT STEAM BOILER: ERENSAN WHB-ESB 160 1600 KG/H – ABSORTION CHILLER: BROAD AIR CONDITIONING 1028 KW 7-12 ºC 177 m3/h – MAIN TRAFO: ABB 4,2MVA 6,3/33kV AUXILIARIES – HT and LT Exchangers – Chiller Unit and its Pumps/Motors – Cooling Tower – HT Radiator – LT Radiator – Chimney – Economizer – Dirty Oil Tank – Clean Oil Tank – Star Point Resistance – Fresh Air Fans – Monorail Crane – All pumps, fittings, pipes, etc. auxiliary equipment in the Engine / Boiler / Chiller system – Generator P ...

Technical data baler: Manufacturer BOA Type 2100 75 (8) PR SD Year of manufacture 1995 Operating hours 9,163 hours, as of June 23 Pressing force main press 90 t Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Filling volume / pressing cycle 2.4 m³ Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 2 x 37 kW Connected load 92 kW Tying system 4-fold vertical, fully automatic, prepared for 8-fold cross binding Throughput rates for quality: B12 / B19 approx. 10 t/hour, bale weight up to 1200 kg/bale Foil approx. 10 t/hour, bale weight up to 800 kg/bale Hydraulic oil tank capacity 1,500 L PLC control system Siemens SIMATIC S7-1500, renewal in 2020 Press dimensions built up with hopper 15,000 x 6,000 x 6,500 mm (l x w x h) Transport dimensions 12,800 x 2,500 x 3,100 mm (l x w x h) Machine weight press approx. 30 t Noise level

AUTOOL HTS708 Automotive Dry Ice Cleaning Machine AUTOOL HTS708 Automotive Dry Ice Cleaner is a multi-purpose cleaning machine for the automotive repair and service field, which can be specially used for car engine carbon cleaning. The dry ice particles are accelerated by a high-speed airflow to remove carbon deposits. The cleaned dry ice evaporates in the environment and is safe and residue-free without damaging the vehicle. It can be used to clean the engine compartment, cylinder combustion chamber, intake valve, throttle valve and other carbon deposits, which serve the purpose of multi-purpose cleaning and maintenance. The device is particularly outstanding in terms of safety, reliability, intelligence and ease of use. Well designed The overall structure of AUTOOL HTS708 auto dry ice cleaner is simple, lightweight and practical. This device is equipped with a trolley bar, a  ...

DUAL SHAFT SHREDDER (next-to-new), Shredding chamber 1.500 x 900 mm, 37 kW a.c.drive with inverter, Sturdy supporting structure, Generous loading hopper, Machine dimensions LxWxH 3,53 x 1,99 x 2,98 mt., for plastics, wood, WEEE, industrial waste, bulk domestic waste and more, installed power : 37

BA150E D285, This 6 inch diesel-driven waste water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/h and pressure up to 37 mwk, 80 mm bore and wear plate with cutting grooves., , Press x Suction (inches) 6 x 6, max. capacity (m3/hour) 500, max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hr) MP50 (50 m3/hr), Diesel engine Perkins//Caterpiller, max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Sound level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1600, , Throughput capacity: 470 m3/h, Max dirt passage: 80 mm, Motor brand: Perkins, Max. head: 37 MWK, Weight: 1600 kg, , = More information =, , Year of manufacture: 2018 ...

The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.

Desposer kitchen waste disposer, waste shredder, garbage chute -Power: 0.75 kW -Voltage: 230/460 V -Speed: 1725 rpm (60Hz) -Connection: Ø 140 mm -Number: 2x available -Price: per piece -Dimensions: 230/H440 mm -Weight: 20 kg

Cylindrical vibrator, tumbling facility, tumbling machine, mass finishing cylindrical vibrator, tumbling facility, continuous vibrator, vibration conveyor, oscillating conveyor, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood, small waste water system with spray device -Manufacturer: CETEMA, round vibrator type TM 500A -Working container: elastically mounted -Total volume: 500 liters -Outer diameter: 1450mm -Working basin width: 430 mm -Working basin height: 510 - 580 mm -Machine for: deburring, polishing, rounding edges -Dimensions machine: 1570/1430/H1140 mm -Dimensions of waste water system: 1010/520/510 mm -Total weight: 1450 kg

BA150E D285, This 6 inch diesel-driven waste water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/h and pressure up to 30 mwk, 80 mm bore and wear plate with cutting grooves., , Press x Suction (inches) 6 x 6, max. capacity (m3/hour) 470, max. head (mwc) 30, Dirt passage (mm) 80, Vacuum system (m3/hr) MP50 (50 m3/hr), Diesel engine Perkins, max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Sound level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1600, , Throughput capacity: 470 m3/h, Max dirt passage: 80 mm, Motor brand: Perkins, Max. head: 37 MWK, Weight: 2150 kg, , = More information =, , Year of manufacture: 2011, Applicable  ...

BA150E D285, This 6 inch diesel-driven waste water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/h and pressure up to 30 mwk, 80 mm bore and wear plate with cutting grooves., , Press x Suction (inches) 6 x 6, max. capacity (m3/hour) 470, max. head (mwc) 30, Dirt passage (mm) 80, Vacuum system (m3/hr) MP50 (50 m3/hr), Diesel engine Perkins, max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Sound level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1600, , Throughput capacity: 470 m3/h, Max dirt passage: 80 mm, Motor brand: Perkins, Max. head: 37 MWK, Weight: 2150 kg, , = More information =, , Year of manufacture: 2011, Applicable  ...

Average output 800-1200 kg/h depending on materials and moisture DIAGONAL LOADING BELT Steel structure, side walls,PVC anti-slip belt,1,4 kw motor, Dimensions: 850×6000 mm. AGGLOMERATOR D1300 Steel barrel diameter 1300 mm. Main motor 250 kw (available with 300 kw motor on request) Replaceable inner steel lining Side door for inspection and blades replacement, Sucking vent for steam extraction Oleodynamic power station 0,75 kw with electrovalve which controls opening of unloading door.water loop cycle for cooling hub bearings belt. Electrical cabinet Dimensions: L mm.3950, W.mm.2.280, H. mm.4652. DISCHARGING HOPPER Diagonal, engine moved auger for material extraction (1,1 kw) Discharging height 830 mm from ground Depressure pipe inspection window safety inner grid Appx dimensions : 1000×1500 mm. Auger diam.180 mm. The line is offered reconditioned. Complete with electrical drawings and  ...