We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,420 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
S1 - insulated 40,000 litres steel tank, aboveground storage tank, cased in zinc plates, heating coil inside, on 2 steel bases, former palm oil tank, good condition. Details of the tank: Contents: approx. 40 m³ / 40,000 litres material: stainless steel tank length: 9,00 m diameter: approx. 2.70 m incl. insulation / 2.50 m without insulation insulation: mineral wool approx. 10 cm, with zinc plating other: heating coil inside, single-walled The container is used, emptied inside and has been cleaned professionally. According with the age there are traces of use. This steel tank / container can be used as a storage tank for whey, vegetable oil, water, liquid food, many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. ...
used
used approx. 6 m³ / 6,000 litres polyester tank / GRP tank, transportation tank, Maier Rotband-tank, good condition. dimensions: height = 3.0 m (tank) = / 3.50 m (total) depth = 1.90 m (total) width = 1.22 m (inside tank) / 1.28 m (outside) Upright standing overground tank on base. Dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise ...
used
P2 - used 40 m³ / 40,000 litres steel tank, double walled, above ground or as underground tank, on 2 steel bases, in good condition. dimensions: diameter approx. 2.5 m (without base) length about 8.90 m height incl. base approximately 2.78 m base width approx. 0.90 m Stainless steel tank DIN6616 D, double-walled, inside plain steel, 2 steel bases. Former isopropanol tank / chemical tank. On request this tank can be refitted for ground installation with a bitumen coating on the outside. The container can be used as storage tank for water, manure, AHL, ASL, seeping juice, canola oil, nutritional oil, as rainwater cistern etc. Price upon request. Item location is 79098 Freiburg im Breisgau. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, feel free to ask us. It is not possible to update all our advertisements daily. Sinc ...
used
Horizontal vacuum bucket dryer mixer Knea dryer 7000 ltr. Used Double-walled vacuum mixer/dryer with heated wall and heated inner tube. With outlet opening, filling dome and service lid, for efficient drying, thickening of products and (contaminated) waste sludge waste. Built: 1997, is currently being regenerated Volume: 7,000 litres Temperature: 151°C Pressure / vacuum 5 bar / - 1 bar (according to pressure gauge), vacuum pump and electric boiler can be offered, as well as up to the customer-specific system Gearbox output speed: approx. 42 rpm (i = 32.8) Transmission power (1,400 rpm): 50 kW Mixer chamber: approx. 1,600 x L 4,400 mm Total dimensions: approx. 6,600 x 2,200 x 3,600 mm Changes and errors in the technical data, data and prices and intermediate sale reserved.
used
various small paddle puller for waste sorting of cutting goods by a conveyor belt. Driven by an electric motor. Pumping height approx. 1.000 mm, adjustable. Very powerful, up to 80 cycles/min
used
REVERS OSMOSIS APPLICATIONS: MILK CONCENTRATION, WHEY CONCENTRATION, WASTE WATER CONCENTRATION STRAINED YOGURT, QUARK, CAPACITIY: FROM 5.000 LT TO 50.000 LT PER HOUR FULLY AUTOMATION CONTROLLED WITH PLC AND TOUCH SCREE PANEL TURN KEY PROJECTS
used
automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...
used
Horn pump Cabinet consisting of: -2 x Horn pump MP 5 (700 l / min) -> For heating oil, diesel and bio-diesel Technical data: Max capacity: 700 l / min Supply voltage: 400 / 50 V / Hz Capacity: 2, 5kW Inlet: DN 80 Pressure connection: DN 80 Maximum suction height: 4, 5 m Protection class: IP 44 Pump Cabinet is painted and fully functional! The pumps can be expanded like at extra charge out of the closet, but we would prefer a sale as a complete package!
used
Automatic Deep Draw Thermoformer High speed mechanical intermittent motion fully automatic packaging machine, balcony structure, independent servo-driven stations, stainless steel finish, PC-controlled. Designed to fit pharmaceutical-production environments, it thermoforms trays for vials, ampoules, syringes and similar products out of thermoformable films such as PVC, PET, Polystyrene (PS), PP, PLA, multilayer laminates etc. Its sturdiness, modular structure, simple operation and the easy, tool-less change over make it reliable, highly flexible, efficient and easy to service. Main features: Independently servo-driven machine stations. Machine cycle-speed is adjustable from the main HMI, under size dedicated recipes. Two web-index grippers grant the highest precision in pitch repeatability Easy, tool-less change over: index change and size-related parameters automatically selecte ...
new
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...
new
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...
new
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg ...
new
High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx. ...
used
P30 - used appr. 3 m³ / 3,000 litres polyester tank / GRP-tank, aboveground, transport tank, good condition. Dimensions: l = 1.90 m; d = 1.70 m; h = 2.00 m (including base) Horizontally lying tank, incl. 2 steel base, dome on the front, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, AHL, ASL, seeping juice, canola oil, or as a rain water tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-ta ...
used
MAN D 2066 LF 12 - Euro 4-287 KW - 390 HP Motor was cpl. repaired according to RAL GZ-797: with new piston rings, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Old Engine must be returned
used
Cooler. Water - and oil coolers suitable for various engines from the manufacturers Iseki, Lombardini, Kubota, Yanmar. Used or like new.
new
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...
new
High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Foerder quantity: 32 l/min. - Engine: Honda GX390 petrol 8.7kW - Dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Manometer - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HD hose 3/8" + 10 m HD hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles Oylbt - Pistol with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning device that is ideal for cleaning and removing pipe blockages for pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages of house ...
used
Motor was sealed front and rear new - upgraded oil pump, thermostat, oil filter, fuel - engine was installed on engine test bench and a cpl. Test run was carried out 6 months warranty on the motor mechanism Mileage only 200,000 km old part pledge 4,500.00 = €
new
Oil-free, air-cooled, scroll compressor with refrigerant dryer. Zero working hours. Machine unused - new! Machine available because of purchase mistake!
pressure:1000 t stroke:800 mm total power requirement:45 kW weight of the machine ca.:97 t dimensions of the machine ca.:4500 x 4400 x 5300 m Return Capacity:40 t Main Cylinder:(d=500mm) 2 Stück :(140 x 80mm) 2 Stück speed of forward flow:40 - 110 mm/sec Return Speed:150 mm/sec Press speed (infinitely variable via PLC):3 - 12 mm/s Table size:3000 x 2300 x 200 mm Ram plate:3000 x 2300 x 1000 mm demand for oil:ca. 1300 l :210 l/min :600 sec :1500 x 150 mm Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²
used
MAN D 2876 LF 13 - Euro 4-390 KW - 530 HP Motor was cpl. repaired according to RAL GZ-797: with new pistons and liners, new bearings, new oil pump, AT cam shaft, AT injectors, new water pump, oil and fuel filters 1 year warranty without KM-limit Bauglieches old part must be returned
used
S5 - used 50 m³ / 50,000 litre steel tank, underground tank, firefighting water tank, water Container, water tank. In good condition, as underground tank or for aboveground use, steel tank, storage tank, water tank, firefighting water tank. Exterior with a new coat of bitumen. volume: 50 m³ / 50,000 litres material: stainless steel tank, single-walled dimensions: appr. 2.5 m diameter x 10.0 m length weight: appr. 8.0-10.0 t The container is used, emptied inside and has been professionally cleaned. According to the age traces of use are present. The container could be used as storage tank for water, waste water, sewage, liquid manure, seeping juice, canola oil, rain collection tank, water cistern, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update a ...
pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure ...
used
Tractor drive from 50KW, optionally with continuous or Variogetriebe, ca 500 PCs around the world,... Perfect compost quality in economic operation, over 20 years experience! For green waste, organic waste, contaminated soil, sewage sludge utilization, drying of biomass...
pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec
pressure:20 t passage width:600 mm stroke:400 mm Weight of machine approx.:2,8 t dimensions:1960 x 900 x 2500 mm power capacity:5,5 kW table plate:600x600 mm pestle plate:500x500 mm daylight:400 mm table height over floor:850 mm :1000-20000 kg :400 mm Approach Speed:max. 100 mm/sec Pressure Speed:1-15 mm/sec :100 mm/sec :1-15 mm :S7 1200 Oil Tank Capacity:250 l
used
Various air-, oil- and fuel-filters, starter engines and alternators to be sold as package after inspection and price negotiations. Please arrange appointment with Mr Kottowski
pressure:20 t distance between columns:200 mm stroke:200 mm weight of the machine ca.:1,5 t dimensions of the machine ca.:2000 x 1420 x 760 m heating plates :660 x 220 mm :200 mm :200 mm Oil Tank Capacity:70 l Table Height:1100 mm :125 mm Ram Height:250 mm
used
Drive system: SIEMENS DS - engine 55 kW,. average rotor diameter: 800 mm Rotation: 3,000 rpm Tools: 96 PCs Grinding gap: 8 - 0.5 mm Air volume: 3,000-3,700 m m²/h Total weight: 2,500 kg Engine data: 55 kW, 3.000 rpm, 400 V, 50 Hz, IP 54 Dimensions approx.: 2,350 X 1,400 X 1,200 (L X W X H) Usage area: Grinding of grain sizes approx. 20-250 µm in 2004, the storage and the engine were renovated and converted the plant to circulating oil lubrication with oil pump and accessories.
pressure:400 t passage width:600 mm stroke:400 mm Weight of machine approx.:14 t dimensions:2380 x 1680 x 3580 mm Engine Output:36 kW Max Working height:750 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec column diameter:230 mm Return Capacity:40 t speed rapid traverse:25 mm/sec Travel:500 mm Oil Tank Capacity:600 l Oil Cooling:1,5 kW :6 m Monitor:WEG 12 Zoll :6800 ? :4200 ? Speed increase to 80 mm/sec.:19000 ? every additional meter conveyor belt:850 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--
used
Used deck baking oven MIWE, type: Ideal 1800.5 FO - In the bakery State baking surface: 18 m² Number of spots: 6 pieces Hearth size: 1,800 x 1,600 mm -With gas - oil burners according to customer requirements - manual control - fully assembled - State: well the stove is technically and visually in good condition and is ready for use immediately. Delivery and installation available on request. We like to overtake even the oven for you.
pressure:200 t stroke:800 mm total power requirement:25 kW draw back pressure:16 t :1 Stück Column-Diameter:150 mm dayligth:1200 mm Ram Height:1000 mm Ram size:1300 x 2220 mm table surface area:1500 x 1300 mm :1300 x 2220 mm :820 mm table surface area:1500 x 1300 mm table height:800 mm table load:8 t pre-running speed:1 - 9,8 mm/sec return speed:2,5 - 25 mm mm/sec quantity of oil:300 l weight of the machine ca.:17 t Dimensions (L/W/H):2420 x 1300 x 4782 mm :0 - 200 T :1 - 10 mm :elektrisch
used
Used deck baking oven MIWE, type: Ideal R - In the bakery State baking surface: 18 m² Number of cookers: 5 units Hearth size: 1,800 x 2,000 mm -With gas burners -Oil burner according to customer requirements - computer control - hood with fan - completely assembled the furnace is located in the State of the bakery and is immediately ready for use. Delivery and installation available on request. We like to overtake even the oven for you. Request
pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l
pressure:200 t distance between columns:2900 mm stroke:800 mm dimensions of the machine ca.:3300 x 2700 x 3100 mm Table dimensions:2500 x 2000 mm :4000 mm :33 mm/sec :33 mm/sec distance table - lower edge of ram:1100 mm table height over floor:750 mm :2300 mm return capacity:25 t total power requirement:15 kW Oil Cooling:1 kW stroke speed:18 mm/sec down speed:2 - 10 mm/sec :200 l table plate:100 mm distance between columns:2400 mm open height:1000 mm weight:9 t Table Height:750 mm :34 Lt./min. Impact leper extension removable (200 mm long):550 ? Table top flattened, with or without T-slots:7900 ?
pressure:2x 75 / 150 t passage width:2050 x 965 mm stroke:800 mm total power requirement:Hauptmotor 22 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:1500 x 1025 m :150 mm :150 mm :72 mm :2 kW :870 x 350 x 150 mm :1500 x 600 x 150 mm :1500 x 1025 x 75 mm :1500 x 1025 x 150 mm :120 mm :80 mm :350 l demand for oil:320 l :350 mm max. open height:1600 mm :15-0 mm/sec :100 mm/sec :2050 x 965 mm :6 mm :0,5 mm
pressure:150 t total power requirement:20 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:8800 x 1800 x 2200 mm Pressure adjustment via rotary control infinitely adjustable:15-150 t Cylinder diameter:100 mm Press speed (infinitely variable via joystick):0-9,9 mm/s servo motor:2 kW Cooling unit:1 kW Oil tank (under table):350 l Oil cooling (electric):1 kW (max)
used
Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 251 Gewaehrleitung: 12 months Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock
used
Helium leak detector Manufacturer: Leybold Type: UL 100 Condition: Tested and ready exhausted: Oil-lubred pump Connection: 230V Delivery time: 1 where. (u.ue.V.); Ready
pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung ...
used
Rotary vane vacuum pump single-stage Status: Generalueberholt Gewawting capacity: 12 months Manufacturer: Leybold Type: Sogevac SV 65 Kat. No.: 10906 Engine: 400V equipment: mineraloile nominal suction glit: 65 m3/h Final pressure: approx. 0.08 mbar (abs.) Zubehoer: operating instructions, oil filling (mineral oil) delivery time: ex works; ready for use
pressure:150 t passage width:1200 mm stroke:700 mm total power requirement:35 kW weight of the machine ca.:13,5 t dimensions:ca. 3600 x 1900 x 5200 mm return capacity:15 t column diameter:160 mm table height over floor:1000 mm ejector stroke:250 mm pressure of ejector:50 t ejector speed:150 mm/sec dayligth:ca. 1000 mm table clamping surface LxW:ca. 1200 x 800 mm clamping area of ram:ca. 1200 x 800 mm :inkl. Ram Height:800 mm :min. 350 mm/sec feed under pressure:min. 60 mm/sec feed under pressure:min. 20 mm/sec return speed:min. 300 mm/sec weight of upper tool min.:1000 kg weight of bottom tool min.:1000 kg weight of tools min.:2000 kg material thickness:0,1 - 0,5 (1.4301 / 1.4828) mm :0,2 mm pro m :10 - 100 % :inkl. Oil cooling (electric):inkl. SIEMENS Controller S7 1200:inkl. :inkl. :inkl. USB interface for data transfer:inkl. Monitor SIEMENS:12 Zoll :inkl. :inkl. tool clamping:24.000,- ...
pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Mot ...
used
Helium leak detector Manufacturer: Leybold Type: UL 200 Condition: Tested and ready for use Outing: Oil Lubricated & Dry Available! Connection: 230V Delivery time: 1 where. (u.ue.V.); Ready
pressure:100 t passage width:700 mm stroke:450 mm weight of the machine ca.:6 t dimensions:ca. 3000 x 1210 x 3100 mm return capacity:10 t :22 kW Max Working height:850 mm :1 - 100 mm speed of return flow:1 - 100 mm/sec :1 - 10 mm/sec. pestle plate:1090 x 600 mm table plate:1090 x 600 mm positioning accuracy:0,1 mm table height over floor:800 mm :300 l Oil cooling (electric):1,5 kW (max) ejector:d=100 mm ejector stroke:210 mm pressure of ejector:100 t no. of ejector pins:1 Stück Monitor WEG:15 Zoll :2.000,-- ? :2.400,-- ? :3.000,-- ? :2.400,-- ? :5.800,-- ?
used
Rotary vane vacuum pump Two-stage oel lubricated Manufacturer: Pfeiffer Type: DUO 250 Cat.-No.: PK D27 602 / K141 Status: Used (functional!) (A general recovery is offered) suction power: approx. 250 m3/h Endduck: > 5x10e-3 mbar Performance: 12 months (in case of general recovery) Including: user manual and oil Delivery time: ex works ; ready for use
pressure:300 t passage width:600 mm stroke:500 mm Weight of machine approx.:8,5 t dimensions:ca. 2275 x 1650 x 4050 mm Return Capacity:30 t Engine Output:30 kW Max Working height:800 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec Travel:500 mm Ram plate:600 x 600 mm Table size:600 x 600 mm Table height above ground level (approx.):850 mm Oil Tank Capacity:350 l Oil cooling (electric):1,5 kW (max) ejector stroke:250 mm pressure of ejector:50 t Maintenance Balcony:2.800 ? Drip pan to prevent oil spil:2.800 ? Upper and lower tooling (for 8kgs salt stone):11.000 ? automatic filling with 500 kg depot:58.000 ? speed increase to 80 mm/sec:19.000 every additional meter conveyor belt:850 ? Light barriers front and back:6.800 ? Side trim:4.200 ? 7m roller coaster-for salt stone transport and interim storage:12.900 ? Faster Version with approach and working speed at 60mm/sec ist avai ...
used
P55 used approx. 15 m³ / 15,000 litres polyester tank / GRP tank lying horizontally, aboveground, two steel bases, in good condition. dimensions: appr. diam. 2.00 m x length 4.60 m, height including base 2.30 m Juno tank on 2 steel bases, dome on the front side, multiple connections, in- and outlets, includes stainless steel valves / ball valves as shown in the pictures etc. The container can be used as a storage tank for many different media, such as water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, rain collection tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in ...
used
Rotary vane vacuum pump oil lubricated Manufacturer: Leybold Type: Trivac D 30 A & S 30 A Voltage: 400V / 50Hz suction power: approx. 30 m3/h end pressure: approx. 5x10e-3 mbar & 5x10e-2 Status: Generalueberholt Performance: 12 months Zubehoer: User manual mineraloel filling Quantity: several available delivery time. ready for use