waste oil used for sale

Working width: 2000mm, max. roll diameter: 800mm, length: 2700mm, width: 1250mm, height: 2050mm, weight: 250kg, with documentation, light table for transmitted light, light from above, winding and unwinding, side shift during winding, winding speed adjustable and counter, an on-site inspection is possible, has been regularly serviced, no videos available.

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,470 mm Total height: approx. 1,115 mm Material color: black Tyres: 4 tyres (2x braked) Material: Polyethylene (PE) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: SSI Schaefer Capacity: 770l Total width: approx. 1,350 mm Total depth: approx. 1,115 mm Total height: approx. 1,470 mm Material color bin: black Material color lid: green Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. A further desired transport or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Waste oil collection tank 950 litres approved for liquids of hazard class AI-III With test certificates State: Technically deficialy Optical: According to age

waste oil collecting tank: . filling capacity: 1000 Liter : . with level indicator: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 20,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 6,840 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 9,990 mm Diameter approx. 2,000 mm Weight approx. 6,500 kg Of course, you can also use your t ...

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

Used oil collector, mobile oil collection container -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg

Fuel tank - fuel tank - steel tank - tanks - used oil tank - tank system gas station - home station - storage tank - storage containers - farm service station - steel tanks 50.000 litres content - according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The tank is painted exterior green - no repainting. L = approx. 10.70 m / D = 2.50 m / weight CA. 9,0 tons. / free charged ex works.

1 pieces. tanks 30,000 litres, fuel oil tank fuel tank fuel station gas station home service station storage tank storage tanks Court gas station steel tank according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid, is used, cleaned, overhauled and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted RAL 7042 - traffic-grey. (Other RAL colours are possible upon request!) L = 10,00 m / D = 2.00 m / weight CA. 5,7 tons. / free charged ex works ...

Oil-air cooler Manufacturer : Hydac Model : OKA-EL6S/40/5.0 The cooler is NEW and fully functional, for more information see pictures.

Ladies and gentlemen, Pictures and further information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place of jurisdic ...

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

BTS-Bag Press With the BTS-Bag Press for waste bags large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the waste volume up to 90%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 90% - Reduces frequency of waste collection - Useable for wet and dry waste - Optimum utilization of waste container - Reduces the number of waste containers - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x ): 1861 x 1200 x 630 mm Transportation height: 1861 mm Machine weight: 325 kg Cycle time: 20 seconds Noise level: 68 dB Compaction up to: 90%

PET-/ Can Compactor, Special Waste Baler BTS-MF60hd The BTS-MF60hd Cans_PET Special Waste Baler is ideal for compacting difficult and hard materials such as plastics, cans, PET and many more. The special waste baler impresses with its ease of use and large filling volume, finished bales can be easily removed with the automatic bale ejector. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Solid bales with bale weight up to 70 kg - Compacts a variety of different materials such as PET bottles, beverage and food cans, paint cans, cardboard and plastic - Cross strapping tying system to hold difficult material in a bale - Fully automated bale ejector, simplifies removal of bale - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing  ...

Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

Abbot dressing plant for chemical (Basic) media (ammonium sulphate) the plant has been used year 2010 (pump 2012) 1 x, then the company has been closed with wild diaphragm pump with ARTA dry clutch DN15 - DN150 complete documents, certificates, declarations of conformity of the individual components possibly Verohrung to but not part of the sale 2011 was once again a wild pulsation dampers for 2800,-€ upgraded Material - new price 17.000,-€, used only by the finest components from ARTA, Düperthal, wild

Waster Baler BTS-MF60 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 60 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 1996 x 1040 x 720 mm Transportation height: 1630 mm Machine weigh ...

Ready exhibition machine MERCODOR ZM 52 Year 2015 Mercodor Shredder ZM 52 Cutting area 650 x 540 mm or 1050 x 540 mm with 22 kw

This is a second hand machine with 22 kw. Knife 24 3 mm hook complete with Hopper, base and switchgear.

Bin Compactor BTS-240L Bin Compactor With the BTS-240L Bin Compactor for 240 Lt. garbage bins large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing bin volume up to 80%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 80% - Reduces frequency of waste collection - Useable for wet and dry household and commercial waste - Optimum utilization of waste container - Reduces the number of waste containers - No climb into the garbage container more - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 2 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x D): 2360 x 780 x 780 mm Transportation height: 2360 mm Machine weight: 234 kg  ...

AUTOMATIC GUILLOTINE type TAGLIABUE TIA 3050 second hand hydraulic cutting system Cutting length mm 3020 Pressor stroke mm 110 Electrical rear feed - Max rear feed width mm 1250 - min rear feed width mm.23 Hydraulic unit motor power Hp 10 Rear feed motor power Hp 0.75 Safety photocells Weight kg 4000

BTS-MF40 Cans_PET Special Waste Baler The BTS-MF40 Cans_PET Special Waste Baler with perforator is ideal for compacting difficult and hard materials such as beverage cans and PET bottles. The perforator compaction head pierces empty but also full bottles and cans so air and liquid can escape and in the same process material will be compacted. The Special Waste Baler impresses with its easy operation throughput and large filling volume. - Solid bales with bale weight up to 40 kg - Suitable for empty and full cans and PET bottles - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Perforator compaction head for piercing closed cans or PET bottles so air and liquids can escape - Roller guided head for ease of movement - CE-certified - Quality product Made in Europe Pressing force: 8 Ton Motor: 2.2 kW 16 Amp Power suppl ...

used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width with additi ...

used baler Manufacturer: BOA Type: IMPRESS D225-Eco Year of construction: 2022 Operating hours: 1.178 (am 29.03.2023) Specifications: Pressing force: 2112 kn / 215 t Specific pressing force: 16.0 kg/cm² Filling opening: 1,620 x 1,000 mm Bale format: 1,100 x 1,200 x length (adjustable) mm Drive power: 3 x 45 kW theoretical output: approx. 750 m³/h (without material) Throughput under operating conditions: - at 30 kg/m³ approx. 16-18 t/h - at 60 kg/m³ approx. 28-30 t/h - at 100 kg/m³ approx. 40-42 t/h - at 150 kg/m³ approx. 50-52 t/h - at 200 kg/m³ approx. 62-64 t/h Total connected load: 250 kW / 500 A Operating voltage: 400 V / 50 Hz electrical insulation: IP 54 Binding: 5 x vertical + 5 x horizontal Bale weight: up to approx. 1,400 kg Machine dimensions: 13,400 x 2770 x 3,065 mm (L x W x H) Machine width wit ...

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Veneer saw Fabr. Mayer with 3500 mm cutting length , with planing unit for re-enforeconclusion with rear width stop

See photos

- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)

material width: 300 mm material thickness: 3 mm cross cut: weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5, 1, 1 m Coil Shredder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nijhuis waste water treatment system, consisting of: Nijhuis scraper, Efcon cabinet for taking water samples, various pumps, pH meters and flowmeters, total dimensions: 4500 mm x 3000 mm x 2700 mm.

Output: 300l/h, output: 300l/h, suitable for the treatment and reuse of rinse water, wash water, paint rinse water, cleaning solutions, waste water from crack testing and other liquid production residues.

for pressing PET bottles

two waste compactors (Bj92 and 95) Price refers to a press

Condition: like new, never used MatrixCompactor 140 All-in-one Units are designed to capture, convey, cut, collect and compact adhesive matrix and edge trim waste from all process machines. They can handle matrix and edge trim from 1 process machine and if edge trim only up to 4 process machines. Configuration of Granulator(s) is customised to the material and number of process machines. Maximum width of matrix Up to 550mm (22") Maximum air capacity 1,600 m³ / hour (940 CFM) Maximum speed 150 m / min (490 FPM) Maximum pipe size Dia. 160 mm (6") transfer Maximum suction distance Up to 10 m (32 feet) Size (LxWxH) 2.212x820x2.110 mm (6'-11" x 3'-3" x 7'-0") Weight 680 kg (1,500 lbs.) Motor fan 2,2kW (3 HP) Motor compactor 2,2kW (3 HP) Power 3 Phase, 230-460V, 50-60 Hz Sound 68-72 dB (A)

Offer here a veneer saw in a very good condition with air compressive tension. The saw comes from a small carpenter's workshop and was only occasionally used condition.

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: Weber Total width: approx. 1,360 mm Total depth: approx. 770 mm Total height: approx. 1,310 mm Content: 360 kg Volume: 770 liters Further data / information: Material color bin: black Material color lid: yellow Usable width: approx. 1,085 mm Useful depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. An additional desired transport or shipment of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery from us.

Hydraulic press for metal cans, make: Serman, model: HI, year: 2012, engine: 4 Kw (5,5 hp), drawer: 550x450 mm. MF-0068

Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available

187 kW 26500 kg The tractor is in working order. In good technical condition, without significant defects. more info on Whats app,

Veneer saw Scheer Type: FM 5-3000 Cutting length 3000 mm Saw motor approx. 1.85 kW Pneumatic pressure beam Maximum insertion height 70 mm Saw blade diameter maximum 180 mm Maximum cutting height approx. 45 mm Support table at the back Weight approx. 450 kg Dimensions: 3600 mm x 1000 mm x H 1300 mm

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-29 SCH Machine No.: 075777 3787/91 Year of construction: 07.1991 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 800 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³