waste heat used for sale

Wilms WLE-75 Oil-Fired Industrial Heater (2 units) Type: Oil-fired industrial heater Manufacturer: Wilms Model: WLE-75 Power: 70 kW Approx. machine dimensions (L x W x H): 1100 x 600 x 2300 mm Fuel consumption: approx. 5.9 kg/h Flue gas losses: 9.0% Airflow rate: 5,200 m³/h (at 20 °C) Heating type: direct-fired, free-blowing hot air Power supply: 230 V / 50 Hz Electrical consumption: 840 W Fuel type: Light fuel oil (Heizöl EL) Functionality not tested This items are delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-41

Ex-landlord devices Auction-ID: A1-45690-15

Type: AHT 2150-ek-so, with 3 Annealing-drums, max. temperature 200°C, heated by electric tube radiators, capacity 84kW (24 x 3,5 kW) , flowrate 50.000m3/h, build in isolated housing, dimensions approximately 6800x4600x4000mm, 2-door switch cabinet with ”Siemens” touchpanel, 1x Sander” multi position winder type AFW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 1x Sander” guidance unit type ABZ-1400-1200-12 (2023), 1x Sander” (un)winder type ABW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 4-door switch cabinet, Used floor space approximately: 15.500x6000mm. Auction-ID: A1-43459-8

- Heating coil 250 kW - Voltage: 575 V / 60 Hz More information on request!

Alfa Laval plate heat exchanger, type: MK15-BWFGR, serial number: 30105-31165, year of construction: 2005, volume S1-S2: 133.0 liter, PS: -1/16.0 bar, TS: -10/50 °C, PT: 22.9 bar, volume S3-S4: 134.0 liter, PS: -1/16.0 bar, TS:-10/50 °C, PT: 22.9 bar, dimensions: 2100 mm x 650 mm x 1800 mm.

Steel skid with Alfa Laval plate heat exchanger, type: MK15-BWFDR, serial number: 30105-31166, year of construction: 2005, volume S1-S2: 132.0 liter, PS: -1/22.0 bar, TS: 0/100 °C, PT: 31.5 bar, volume S3-S4: 130.0 liter, PS: -1/16.0 bar, TS: 0/40 °C, PT: 22.9 bar, including GEA purger. Please notice that the 2 WITT kältemaschinenfabrik GmbH float regulators and the pipework are not included.

2008 installed Electrically disconnected last year - last year only served as an emergency generator. Volledog working disconnected. 2 points of attention: fuel supply for sticky oil needs to be cleaned. Corrosion inspection of three-way valve for hot water distribution. Auction-ID: A3-43511-6058

Equipped with nr. 2 material trolleys, loading platform, new spare gasket for the door. Internal compartment volume: 1.5m³; internal measurements: 1000 x 1000 x h 1500mm; internal capacity: 400 Kg; Rated temperature: 250° C; maximum absorbed power: 29 Kw. Serial: 90256 Estimated weight: 1200 kg Approximate dimensions: 1800x1500xh2550 mm 1400x1200xh1000 mm Auction-ID: A7-44996-55

Consisting of 2x LU-VU SAV8S 2122 V/V high-performance condensers with 2 motors and 2 fans each, volume 44 l each, max. pressure 3 MPa each Auction-ID: A7-45702-40

Winterwarm TR100 gas-fired heater 100 KW power Can be used with natural gas or propane 230V connection for fans and control Including control box Auction-ID: A1-41992-117

Winterwarm EH Electric heater 400V connection Including control box Auction-ID: A1-41992-118

Plant Type: Industrial Process Cooling Plant / Chiller Manufacturer / Supplier: R. Tusa Kälte-Klima-Service Year of Make: 2004 Type: WS-45 CE marking: available Application area • Industrial process and machine cooling • Suitable for: Machine tools, production plants, hydraulic and oil cooling • Operating mode: Stationary indoor installation on steel platform Refrigeration system • Closed refrigeration circuit • Refrigerant: R507 • Max. refrigerant charge: approx. 25 kg • Direct drive compressor Compressor data • Volume flow: approx. 47.25 m³/h • Nominal speed: approx. 2,900 rpm • Compressor end pressure: approx. 30 bar Motorization • Electric motor with approx. 20 kW nominal power • Three-phase connection • Industrial-grade design for continuous operation Cooling medium • Secondary circuit with water or water-glycol mixture  ...

Equipped with: central heating connection, position switch for fan Auction-ID: A1-40104-81

Key data: 75 KW, 80 kVA, 400 V

Viessmann Gas-CHP Vitobloc 200 EM-70/115 Gas power and heat generator from 2013 with unknown operating hours, control with missing parts. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 43.2L8 C 6/4, 80 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM-70/115 Type: Gas CHP Serial Number: 7411148 3 02168 101 Engine: MAN E0836 E302 Power [KW]: 75 Power [KWel]: 70 Year of Make: 2013 Operating hours: unknown Weight unit [kg]: 2,500 Dimensions LxWxH [cm]: 340 x 90 x 180 AC Generator Leroy Somer LSA 43.2L8 C 6/4 Manufacturer: Leroy Somer Model: LSA 43.2L8 C 6/4 Type: AC Synchronous Generator Serial Number: 302845/2 Power [KVA]: 80 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 115 Speed [1/min]: 1,500 Year of Make: 2013

Key data: 997 KW, 1222 kVA, 400 V

For sale is a used gas generator of the brand Gastechnik with Deutz MWM TBG 620 V16 engine with accessories. The accessories consist of: 4 control cabinets. Gas line. Heat exchanger. Electric pump etc. Power: 1222 kVA / 997 kW Year of Make: 1998 Nominal voltage: 400/231 V Frequency: 50 Hz COS φ: 0.8 Generator: Stamford HC.1734F2-CG (Newage) Weight: approx. 10,000 kg

HUBER CC303 Polystat CC3 Bath and Circulation Heating Thermostat CC 303 Circulation Water Bath with CC3 Thermostat Working temperature: 55...300°C with cooling device: -20...300°C Dimensions (W x D x H): 335 x 382 x 433 mm Net weight: 22 kg Max. delivery power: 25 l/min; 0,7 Max. suction power: 18.5; 0.4 bar This model has been replaced by the CCx-315B vpc model

Key data: 180 KW, 223 kVA, 400 V

MDE Gas Generator (CHP) MBK 2876 LN Sewage gas electricity and heat generator from 2001 with unknown operating hours, control has defect. 173 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: MDE Model: MBK 2876 LN Type: Natural Gas Electricity and Heat Generator Serial number: E 20464 Power [KWel]: 173 Power [KWth]: 289 Voltage [V]: 400 Current [A]: 346 Frequency [Hz]: 50 Engine: MDE BK 2876 LN – sewage gas Engine power [KW]: 180 Year of Make: 2001 Operating hours: unknown Weight unit [kg]: 3,000 Dimensions LxWxH [m]: 3.40 x 1.90 x 2.20 AC Generator Leroy Somer LSA K46.1 VL12TR C11/4 Manufacturer: Leroy Somer Model: LSA K46.1 VL12TR C11/4 Type: AC Synchronous Generator Serial number: DJ07B532/02 Power [KVA]: 223 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 321 Speed [1/min]: 1,500 Year of Make: 2001 We ...

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-72

Quantity 2. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-71

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-5

Dimensions and weight per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-120

Quantity 2. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-70

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-14

Quantity 3. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-12

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-6

Quantity 2. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-30

Includes HELIOS Type STH 5 fan heater and foils, windshield cleaner Auction-ID: A1-45762-122

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-98

Dimensions and weight per unit. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-121

Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-7

Quantity 3. Collection on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-29

Quantity 2. Collection by appointment only on Wednesday 20 and Thursday 21 May 2026 from 09:00 to 16:30 (BST). This item is sold ex-foundation and consequently, all the logistical arrangements, including dismantling, packing loading the goods, transport, customs, and delivery to the final destination, are the responsibility of the Buyer. Auction-ID: A7-45642-8

Heating surface 230.5 m², test pressure 18 bar, operating temperature -40 to + 60 °C, with metal tray Auction-ID: A1-45682-34

This vertical plate heat exchanger from GEA Ahlborn is designed for efficient temperature exchange between two liquids. It is made of stainless steel and is designed for a permissible pressure of 16 bar and a permissible temperature of 100 °C, making it suitable for a wide range of industrial and brewing applications. The unit has a robust base construction with supports that ensure stability during operation. With dimensions of 1.55 m (L) × 0.45 m (W) × 1.50 m (H) and a weight of 1,500 kg, it offers a compact yet robust solution for heat transfer needs. Our team at VBW Asset Trade will be happy to answer your questions., Permissible pressure: 16 bar , Permissible temperature: 100 °C, Length: 1,55 m, Width: 0,45 m, Height: 1,50 m, Weight: 1500 kg, Material: stainless steel, Position: vertical, Base construction: mainstays

Additional title: one-stage, Allowable pressure (wort & water): 10 bar, Allowable temperature (wort & water): 120 °C, Test pressure: 13 bar, Volume: 572 l, Length: 1,537 m, Weight: 3898 kg, Features: DN80 dairy coupling; 421 plates; fluid group 1

This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 240 hl/h 2 stages, Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm, Operating pressure: 23 bar, Length: 2000 mm, Width: 700 mm, Height: 2000 mm

horizontal tubular heat exchanger, Additional title: for CIP or hotwater, Media flow: 500 hl/h, Working pressure orifice baffle: 10 bar, Working pressure piping: 8 bar, Working temperature piping: 200 °C, Length: 1,05 m, Width: 0,6 m, Height: 1,1 m, Weight: 300 kg

Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h, Additional title: 2-stage heat exchanger, Capacity: 600 hl/h, Hot water: 750 hl/h, Operating pressure: 21 bar, Operating temperature: 100 °C, Length: 2,15 m, Width: 0,95 m, Height: 2,15 m, Weight: 5000 kg, Material: EPDM HT / NBR / 1.4439

Technical data on request !

Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heati ...

In stock on pallet, total dimensions approx. 1280x790x1600 mm Auction-ID: A1-45790-553

Plate heat exchangers; isolated; on rack; width 50 cm, height 1.10 m, depth 20 cm, for an extra charge also with partial piping and 3 gate valves Loading FREE Truck

Flash pasteurizer for pasteurizing liquid food products. With pumps, preheater and control unit mounted on a common frame. Designed for a capacity of 1000 liters/hour., Additional title: Pasteurisation, Capacity: 1000 l/h, Compressed air: 6 bar for control air, Operation / Control: HMI on switch cabinet, Base construction: mounted on frame, Features: 2 x Alfa Laval plate heat exchangers, 2 x centrifugal pumps, pressure compensation tank, sight glass, temperature and pressure sensors, various other fittings and valves, HMI