waste heat used for sale

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-429

approx. 149m Waste cardboard conveyor / belt conveyor, SSI Schaefer, – used - Ex-site price (net): only 12.500.-€, dismantled, packed and loaded! Manufacturer: SSI Schaefer Year of manufacture: 2018 Conveyor belt drive: 1.5kW = 14 pieces Information such as belt width, etc. will follow Condition: good Available: from approx. October 2026 Location: Erfurt area

250 W motor Operating range from 3 to 10 m³/h Epoxy-based coating for corrosion protection High-voltage capacitors Copper motor winding Stainless steel motor shaft Integrated float that kicks in as soon as the water level rises Thermal protection against overheating Auction-ID: A7-49495-401

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-424

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-425

Power: 600 watts Voltage: 230 V~50 Hz Thermal protection: 65 °C Flow rate: 270 l/min Pressing distance: up to 80 m Pressing height: up to 8 m Auction-ID: A7-49495-252

250 W motor Operating range from 3 to 10 m³/h Epoxy-based coating for corrosion protection High-voltage capacitors Copper motor winding Stainless steel motor shaft Integrated float that kicks in as soon as the water level rises Thermal protection against overheating Auction-ID: A7-49495-301

Power: 600 watts Voltage: 230 V~50 Hz Thermal protection: 65 °C Flow rate: 270 l/min Pressing distance: up to 80 m Pressing height: up to 8 m Auction-ID: A7-49495-52

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-426

General SKU251Y229 LocationBarneveld MakeHeraues Main Features MaterialStainless steel Volume300 Ltr. Max.temp.200 °C Specified Features - Drying oven Drying ovencheck Max. temperature200 °C Number of compartments:1 Capacity300 l Internal width570 mm Internal depth600 mm Internal height900 mm Electric heatingcheck Electric capacity10 kW (380 V) Number of doors:1 With air circulationcheck With fan(230 m³/h) Motor0.13 kW (380V, 2810 rpm (Ex)) With racks(8x) MaterialStainless steel 1.4301 (304) General Serial83152-01 TypeFT60/200EX G4-G2/C Year of construction1983 With switchcheck Floorspace1,0 x 1,2 m Total height1,5 m Weight650 kg ATEX designedcheckConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed a ...

Waste Incineration Plant - Waste incineration: Biomass and municipal solid waste, - Capacity: 15-20 tons/hour - Technical output: 10 tons of steam, 340°C, 35 bar - Electrical output: 2500 kVA/20,000 V/400 V, 50 Hz - Reverse osmosis water treatment for steam generation: 10,000 liters/hour - Safety and storage tanks included. The plant is complete. Find more here - .ucymachines/ Contact us at - sales@ucymachines

General SKU291Y468 MakeHosokawa Alpine TypeOmniplex 40/32HA LocationBarneveld Main Features Motor15 KW Width335 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeø 260 x 300 mm Moving hammers18 Hammer width125 mm Without sieve cagecheck Housing dimensions 520 x 310 mm Inlet335 x 155 mm Motor15 kW (380 V 1460 rpm) General Floor space0,80 x 0,75 m Total height0,65 m Weight960 kg Extra SpecificationsStaal soort 1.2826Consumer wasteHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicHosokawa AlpineIndustries > Recycling > Consumer wasteMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > OrganicsIndustries > Recycling > E-waste & metalIndustries > Food & Feed > Animal feedIndustries > Food & Fee ...

General SKU291Y508 LocationBarneveld MakeStephan TypeUMC 12-F No.719.063.01 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume12 Ltr. Motor1.8 KW Specified Features - Cutter Cuttercheck Capacity12 l. Diameter320 mm Depth200 mm Knife diameter200 mm Number of knife blades1 With scrapermanual Inletcheck Outletcheck With jacketcheck Motor1,8 kW, 380 V With variable speed drivecheck Speed150—2800 rpm MaterialStainless steel 1.4301 (304) With jacketcheck General Year of construction1992 Mounted on wheelscheck With switchgearcheck Floorspace1,00 x 0,65 m Total height1,30 m Weight180 kg Extra SpecificationsWith vacuum pump, 0.37 kW, 220 V, 2700 rpm, Stephan temperature meter, and spare parts.Consumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersCuttersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganicsFood additiv ...

General SKU291Y511 MakeCondux TypeCUM 100 No.5988 Year of construction1992 Main Features MaterialStainless steel Shell (Material)Stainless steel Specified Features - Fine Impact Mill Grindercheck Rotor sizeø 95 mm Grinding room sizeø 100 mm With sieve cagecheck Housing dimensions ø 100 mm With hoppercheck Inletø 30 mm Feeding with vibro feedercheck Motorcheck With variable speed drivecheck Speed3000/6000 rpm Fine Impact Mills MaterialStainless steel General LocationBarneveld Mounted on wheelscheck With switchcheck Floor space0,90 x 0,60 m Total height1,60 m Weight200 kgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarFine Impact MillsAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharma ...

When collected, the container will be completely emptied Size 500x230x90 Aluminum side doors available Auction-ID: A3-46152-11330

New container with roller wheels and pull-up hook. door can be opened in 2 parts. If desired, also available in black. Auction-ID: A3-46152-6892

New container with roller wheels and pull-up hook. door can be opened in 2 parts. If desired, also available in black. Auction-ID: A3-46152-6891

450x230x80 When collected, the container will be completely emptied Auction-ID: A3-46152-11327

The cleanroom washbasin with automatic faucet comes from the pharmaceutical industry. Doors with circumferential seal. The waste bins are opened by foot operation. Dimensions: 120x60x90 cm Material: stainless steel, plastic Auction-ID: A7-49816-147

Press force: approx. 1.5t/15kN Power: 1.1kW/8A Power supply: 230V Bale chamber approx. 730 × 500 × 930 mm Filling opening approx. 704 × 458 mm Bale size: approx. 700 × 500 × 500–700 mm Bale weight carton: up to approx. 30 kg Bale weight plastic: up to approx. 50 kg Cycle approx. 27 seconds Auction-ID: A1-49964-53

Will be delivered without chemicals please note no tools available for loading this container Auction-ID: A1-47444-124

Equipped with 400v connection; bale size: 120x80x110 cm; Filling opening: 120x67cm; Max press pressure: 30t; Max bale weight: 360 kg Auction-ID: A1-47360-10

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Cat. No. 07-109-3 in very good condition Standard: Manufacturer NEUMO Type DUPLEX 80/100 Operating/temperature 90C Maximum operating pressure 10 bar Adjustable V2A - Frame Heat conduction inside NW 50 Heat conduction outside NW 100 Product management NW 80 with 7 tubes x 6 m long without measuring technology and connections Dimensions and weight: Length: 620 cm Height: 140 cm Depth/width: 70 cm Weight: 755 kg For inquiries: Tel: 09353 90905-0 Fax: 09353 90 90 5-22 or 0171 651 8248 We also have other winery machines - request our complete catalogue! All prices ex works plus law VAT Intermediate sale reserved! Delivery time: immediately from stock The price quoted is only valid for 1 piece

Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition

Ladies and gentlemen, we offer: Biomass Container Heating incl. storage container with hydr. Shear floor discharge Plant complete with saemt installations Heating capacity 450 kW reachable by conversions now 480 kW Hot water production Fuel: coarse, moist spaene, wood chips up to 40% HF Best measurement results: Dust content 0.04 g/m3 at exhaust temperature of 170 degrees C For more information and pictures we are available. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any w ...

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED

Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!

Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in  ...

Choice of 3 x RENTEC n.v. (Belgium) steam heated autoclaves Internal dimensions: 3000mm dia x approx 2500mm long (inc. dished end and door), Working pressure 10 Bar, Hydraulic Bayonet type door Year of manufacture 1995 Drawings and documentation available. No controls or hydraulic unit for door (all 3 were running off 1 pump). In very good condition.

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

Many thanks for your interest on our new Heating/cooling table for chocolate or sugar-, candy dough, please find follow our offer: Heating table / cooling table / working table for sugar or chocolate mass Dimensions (lxbxw) : 1200 x 800 x 800mm / or (lxbxw) : 800 x 600 x 800mm (after customers request we are able to produce other dimensions) Execution completely in stainless steel: folded plates made of stainless steel Standing on 4 feet, (square tube 50 x 50) optional height adjustable with two wheels and two castors water heated, closed system with electr. Thermostat, heat exchanger, circulation pump, safety valve 0.5 bar) Plate heat exchanger technical changes reserved Wir bieten diese Maschine als Neumaschine zum Verkauf an. I offer this machine as New machine

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Fuel tank heating oil reservoirs for oil storage tank 20,000 Litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = approx. 6.90 m / D = 2.00 m / weight CA. 4,2 tons. / free charged ex works.

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...

Fuel tank heating oil reservoirs for oil storage tank 20,000 Litres capacity according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = approx. 6.90 m / D = 2.00 m / weight CA. 4,2 tons. / free charged ex works.

CLIMAVENETA AWR-MTD2-XE.0031MS Brand:CLIMAVENETA Type:AWR-MTD2-XE.0031MS Stock number:M23-4626 Cooling capacity:9.2 kW Application:Cooling / Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:3,5 kg Voltage:220 Volts Power consumption:5,19 kW Dimensions:900 x 420 x 1240 mm Weight:155 kg Year: New/unused Number in stock:3 piece(s) Price:Quotation request Description: New unused air-cooled Climaveneta water chiller/heat pump with a scroll compressor, water pump and expansion vessel. This machine is equipped with a separate control unit. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating: Q= 12,3kW at +40/45°C and +7°C). Visit our website: used-refrigeration

Fuel tank heating oil reservoirs for oil storage tank diesel storage tanks 40,000 Litres according to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 600 with domed lid is used, cleaned, overhauled and is equipped with the following fittings: 1 Filling tube with TW closure (filler cap) and dip tube 1 Sounding pipe provided with dip stick and sounding Rod seal, 1 Vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 Head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted according to customer requirements. L = 8.70 m / D = 2.50 m / weight CA. 7.5 tons. / free charged ex works.

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 22,500 litre pressure vessel. This is a 22.5 cbm pressure vessel made of steel from the lined with an inner coating. Material S235JRG2 Steel . Container dimensions: Length : approx. 6,100 mm diameter: approx. 2,300 mm weight: approx. 5,500 kg Pressure: 10 Bar Shape: cylindrical ---------------------------------------------------------------------- --------------------- Of course, you can also help shape your tank system! All our systems are used in our company by selected employees extensively checked and checked. We also offer an inexpensive delivery on request. It is possible to  ...

GEA Ahlborn plate heaters used

Heating power: 18.5 kW maximum temperature: 350 ° C maximum capacity: 15 ltr. 380 V / 60 Hz

Plate apparatus Sigma 37 Manufacturer: API Schmidt-Bretten GmbH & Co.KG Type: Sigma 37 Serial number: 61/28925/06 Output: 18,000 l / h Year of construction: 1978 Product: Solution 60% TS Temperature: 20 ° C - 95 ° C Max. Betreibsüberdruck: 10 bar Chamber: Serial number: 61/17825/04 Output: 18,000 l / h Holding time: 40 s Year of construction: 1978 Max. Operating pressure: 6 bar Tension: Initial size (new seals): 1.345 mm Biomass (seals consumed): 1,277 mm Movable lid.

Cat.-No. 14.00230 in very good condition Cat.-N°: 14-00230L available: 1 unit 115 m tube in AISI 304 DN 40 Mount according to your Specifications Other Sizes upon Request Measurement and weight: total height: 400 mm Width: 700 mm total length: 3000 mm weight: 185 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg Subject to prior sale General terms and conditions listed on our website. Prices are subject to change without notice. Visit our Web-Site: www.eurolux-ag.com

Laboratory Heating Press EHSP20H – Used Demonstration Machine Table press / electric screw press with pressing pressure 20 KN (2 tons) With heating device up to 200 °C from above and below. Press drive with screw jack gear, reduction ratio 1 : 12, spindle diameter 32 mm, Pitch 6 mm, pressing area approx. 100 150 mm, clear height and stroke approx. 300 mm. Geared motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max. dynamic load 20 kN. With reversing control, control box and motor protection plug. Sturdy press frame made of steel. Undertable made of high-quality aluminium profiles 4545 mm, table surface 600600 mm, Table top made of multiplex board. Total weight approx. 100 kg. The table press has a pressing pressure of 20 kN (dynamic load). Typical applications are pressing work with exact lining. Suitable for pressing bonding, embo ...

Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Laboratory heating press REITZ EHSP5H – used demonstration machine Heating press with pressing pressure 5 KN (0.5 tons) With heating device up to 200 °C from above and below. - Electric screw press press press force 5 KN (0.5 to) - Screw jack with spindle 20 mm, pitch 5 mm - Gear reduction ratio 1 : 10, 0.5 mm spindle travel per revolution - Clear width approx. 60 mm - Pressing area 100150mm - Heating device with temperature control, 2 heating plates 100 x 150 mm - With TECO electric motor 0.18 KW - With reversing contactor control (up – down buttons) and emergency stop - Motor protection plug against overload, with main switch - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 100 kg . Suitable for foil bonding and embossing. Due to self-locking of the spindle, long holding time with constant pressure. The scr ...

Heating capacity: 10,5 kW Max. Temperature: 350 ° C maximum capacity: 12 ltr. 380 V / 50 Hz protection class IP 54. Pressure vessels: 9 kW 12 bar 4.2 ltr. Max. Operating temperature: 350 ° C Minimum flow rate: 0,4 m³ / h

Supply air heating system, NW250, 400V, 9KW, KMS, mint condition -80% Special price ! The current new price of a similar product is more than € 8,000 excluding VAT. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Top condition like a demonstration unit! The part was removed from a new machine that has demonstrably only run for approx. 100 operating hours. Technical data: - Supply air heater 9 KW - Heating cartridge with heating cross 400V 3x3000W - Incl. pipework, complete design in stainless steel + pipe insulation - Incl. corrugated flex sleeves - Stainless steel intermediate non-return valve AWS ZRK-VA-VA-200-F - Assembled incl. stainless steel mounting bracket - Price is without HEPA filter and Ex centrifugal fan, we are happy to offer - Parts list and drawing from KMS - Inlet side NW250 - Outlet side NW250 reduce ...