waste heat used for sale

Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested

General SKU312X490 MakeGörgens Mahltechnik GmbH Dormagen TypeG-130 No.247 Year of construction2001 Main Features Motor110 KW Width1000 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeø 1300 x 680 mm Grinding room sizeø 1580 x 1000 mm Inlet1000 x 150 mm Motor110 kW 400 V Speed1100—1700 rpm Fine Impact Mills MaterialStainless steel 1.4301 (304) General LocationBarneveld With control cabinet(as is) Floor space2,68 x 1,84 m Total height2,08 m CEcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarFine Impact MillsAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicGörgens Mahltechnik GmbH DormagenIndustries > Recycling > Consumer  ...

Bio shredders/ mixers Seko Constellation 6000/200ME Electrically powered stationary organic shredder/mixer for processing garden waste, cellulosic waste, organic waste, market waste, green waste, etc. for composting Power: 180 KW Total weight: 11,100 KG Basic equipment: • Branch gearboxes with planetary gearboxes and electric motors • With control console to start the machine at full load • Automatic gearbox control and reversal of the chopping unit • Hopper made of wear-resistant steel • Spiral chopping shafts made of wear-resistant steel • Chopping blade made of high-strength steel • Replaceable, adjustable counter blades made of wear-resistant steel • Retractable discharge belt, discharge height up to 3m Condition of the machine The machine is in good technical and visual condition. Warranty: The machine will be sold in the condition existing ...

General SKU231Y132 LocationBarneveld MakeWam Main Features Motor3 KW Inlet diameter100 mm Width350 mm Specified Features - Lump breaker Lump breakercheck Double shaftcheck Teeth height50 mm With hopperbag dumping station InletDN100 OutletDN350 with valve Motor3,0 kW (400 V, 1430 rpm) Rotor speed60 rpm MaterialStainless steel 1.4307 (304L) General TypeDLP2035G Year of construction2010 Mounted on wheelscheck With switchcheck Floorspace1,30 x 1,25 m Total height1,70 mConsumer wastePowdered foodsGeneric medicinesLump breakersRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganicsAnimal feedOther feedNew arrivalsMinerals & inorganicWamIndustries > Recycling > Consumer wasteIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesBreakers > Lump breakersIndustries > Chemical >  ...

TECHNICAL DATA: Hopper opening: 700 x 360 mm Installed power: 15 kW Rotor: 600 x Ø 252 mm

General SKU204Y005 MakeFlottweg Serial009.006.01 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor75 KW Specified Features - Decanter Decantercheck Screw diameter600 mm Screw length2500 mm InletDN65 Liquid outlet250x800 mm Solids outlet700x800 mm Motor75 kW, 500 V 1483 rpm With hydraulic unitcheck Motor22 kW, 500 V 1465 rpm Max. rotor speed3000 rpm MaterialStainless steel 1.4463 General TypeZ6E-4/454 No.009.006.01 Year of construction1996 With switchgearControl panel (as is): No Electrical panel included Floorspace4,90x1,80 m Total height1,30 m Weight9750 kg Extra SpecificationsDrum speed 3000 rpm, screw differential speed 1-31 rpm,&:nbsp:Weir diameter 398 mm, drum inner diameter 620/420 mm,&:nbsp:max working temperature 100°C, &:nbsp:max sediment density 1,5 kg/dm3,with spare screw, spare parts, hydraulic pump,&:nbsp:Angle inclination 8 ...

General SKU223T197 LocationBarneveld MakeFlottweg-Dekanters (DE) TypeZ 32-3/401 Main Features MaterialStainless steel Motor20 KW Specified Features - Decanter Decantercheck Screw diameter320 mm Screw length934 Inletø 45 mm Liquid outletcheck Solids outletcheck Motor20 kW (400 V, 2940 rpm) Max. rotor speed5000 rpm MaterialStainless steel 1.4408 General No.902336 Year of construction1991 Floorspace2,1 x 1,3 m Total height0,8 m Weight1400 kgConsumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherOrganicsE-waste & metalAnimal feedDyes & pigmentsDecantersPlastic & rubberNew arrivalsMinerals & inorganicFlottwegIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > Catalysts & ...

General SKU223T196 LocationBarneveld MakeFlottweg Dekanter (DE) TypeZ3L Main Features MaterialStainless steel Motor22 KW Specified Features - Decanter Decantercheck Screw diametermax. 420 / min. 226 mm Screw length900 mm Inletdia. 46 mm Liquid outletcheck Solids outletcheck Motor22 kW (400 V, 2940 rpm) Max. rotor speed4000 rpm MaterialStainless steel 1.4307 (304L) General No.F 831 Year of construction1981 With switchcheck With switchgear(as is) Floorspace2,3x1,3 m Total height1,9 m Weight2350 kgConsumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherOrganicsE-waste & metalAnimal feedDyes & pigmentsDecantersPlastic & rubberNew arrivalsMinerals & inorganicFlottwegIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Chemi ...

General SKU043R200 MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88 LocationBarneveld Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Hammer Mills MaterialStainless steel 2.4602 (Hastelloy C-22) General Floor space1,7x0,7 m Total height1,2 m Weight800 KgConsumer wasteHammer MillsCatalysts & fillersFeed additivesDiscountOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberMinerals & inorganicEngelsmannIndustries > Recycling > Consumer wasteMills > Hammer MillsIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesDiscountIndustries > Recycling > OrganicsIndustries > Recycling > E-waste & metalIndustries > Food & Feed > Animal feedIndustries > Food & Feed > Other feedIndustries  ...

General SKU269Y417 MakeStephan TypeTK 160 No.723.579 Year of construction1997 Mounted on framecheck Main Features MaterialStainless steel Volume150 Ltr. Motor24 KW Specified Features - Cutter Cuttercheck Capacity30—100 l. (150 l.) Diameter680 mm Depth425 mm Knife diameter350 mm Number of knife blades3 With scraper2,2 kW, 380 V, 1400/21 rpm Inlet250 x 250 mm Outlet330 x 280 mm Motor15/24 kW, 380 V, 750/1500 rpm Speed26 rpm Capacity800 kg/h MaterialStainless steel General LocationBarneveld With switch(as is) With switchgear(as is) Floorspace2,18 x 1,50 m Total height1,58 m Weight1130 kg CEcheckConsumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersCuttersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganicsFood additivesSolid pharmaceuticsDyes & pigmentsPlastic & rubberNew arrivalsStephanIndustries > Recycling > Consumer wasteIndustries  ...

General SKU106Z375 MakeLB Bohle Ennigerloh LocationBarneveld TypeTrockenschrank TS-30 D Main Features MaterialStainless steel Volume1800 Ltr. Specified Features - Drying oven Drying oven(1x) Number of compartments:1 Capacity1800 Ltr Internal width875mm Internal depth1450mm Internal height1450mm Steam heating(4 bar) Number of doors:1 With fancheck Motor1,5 KW, 220/380 Volt With rack mounted on wheels(1x) 2x 15 slots (800x530mm) MaterialStainless steel 1.4301 (304) General No.601 Year of construction1990 With switchgear(as is) Floorspace1,6x1,3 m Total height2,6 m Weight1100 kgConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganics ...

General SKU432X1359 LocationBarneveld CEcheck MakeGLATT / Glatt AG Pressure Working pressure6 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2375 Ltr. Max.temp.80 °C Specified Features - Drying oven Drying ovencheck Max. temperature80 °C Internal width1000 mm Internal depth1350 mm Internal height1760 mm Electric heatingcheck Electric capacity6 kW Number of doors:1 With air circulation2400 m³/h With fancheck Motor2.2 kW, 2840 rpm With rackscheck With rack mounted on wheelscheck With trays36 (800 x 600 x 35 mm), area 17.3 m2 With timercheck MaterialStainless steel 1.4301 (304) With jacketcheck General TypeGHT-U-600 Machine number101.586 Year of construction1998 Mounted on framecheck With switch(as is) With switchgear(as is) Weight1500 kgConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs ...

General SKU432X1357 LocationBarneveld MakeGlatt AG Pressure Working pressure6 Bar Main Features MaterialStainless steel Volume1578 Ltr. Max.temp.50 °C Specified Features - Drying oven Drying oven(Hordentrockner) Max. temperature50° Capacity1578 l. Internal diameter1200 x 920 x 1430 mm Internal width1200 mm Internal depth920 mm Internal height1430 mm Steam heatingcheck Number of doors:1 With air circulationcheck With fancheck MotorSupply fan motor: 2 kW Exhaust fan motor: 3 kW Total: 5 kW (motors only) With rackscheck With rack mounted on wheelscheck With trays24 (3 x 50 x 80 cm) area 9,6 m2 With timercheck With jacketcheck Drying ovens Tray sizes500 x 800 x 30 Specified Features - Drying oven MaterialStainless steel 1.4301 (304) General TypeGHT-U-250 Machine number101.145 Year of construction1993 With switchgear(as is) Floorspace1,1 x 1,8 m Total  ...

General SKU050F238 TypeGHT-400 :Glatt Horden Trockner: LocationBarneveld Main Features MaterialStainless steel Volume1800 Ltr. Max.temp.100 °C Specified Features - Drying oven Drying oven(1x), make Glatt AG Pratteln Max. temperature100 Degr. C. Number of compartments:2 Capacity2x 900 Ltr Internal width700mm Internal depth950mm Internal height1300mm Steam heatingcheck Number of doors:2 With fancheck Motor3,3 KW, 380/660 Volt (Ex) With rack mounted on wheels(2x), With 15 slots each 500x800mm With trays/With 29 product containers each 495x800x35mm MaterialStainless steel 1.4301 (304) General No.101010 Year of construction1991 With switchgear(as is) Floorspace2,6x1,3 M Total height2,7 M Weight1600 KG ATEX designedcheckConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnolo ...

Waste-Box Collector, Waste Collector, Blower, Fan, Filter System, Radial Fan, Dust Extraction Blower, Fan, Extraction, Dust Blower -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners -Motor power: 2.2 kW -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

General SKU004F006 MakeVötsch Industrietechnik GmbH TypeNTU 60/40/60-S-GMP 400 C No.59526004580010 Year of construction2000 LocationBarneveld Main Features MaterialStainless steel Volume144 Ltr. Max.temp.400 °C Specified Features - Drying oven Drying ovenwith :outlet-air heat exchange system: (1x) Max. temperature400 Degr. C. Number of compartments:1 Capacity144 Ltr Internal width600mm Internal depth600mm Internal height400mm Electric heatingcheck Electric capacity21,6 KW, 400 Volt Number of doors:1 With fan(44 m3/Min) Motor1,5 KW, 230/400 Volt MaterialStainless steel 1.4301 (304) General With switchcheck Floorspace2,1x1,0 M Total height2,2 MConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPap ...

General SKU026E105 MakeEvans Universal Ltd. Leeds No.2042 Year of construction1999 Mounted on framecheck Specified Features - Drying oven Drying oven:Zinc crucible furnace: (1x) Number of compartments:1 Internal diameter425mm Internal height450mm, Inlet dia. 300mm Gas heating, Burner make Riello, type 40 GS 5 (120 KW) General LocationBarneveld With switchgear(as is) Floorspace4,2x2,1 M Total height2,3 M Weight2300 KGConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicEvans Lee ...

General SKU079B442 MakeLytzen Denmark TypeC No.891139 Year of construction1989 LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Max.temp.300 °C Specified Features - Drying oven Drying oven(1x) Max. temperature300 Degr. C. Number of compartments:1 Capacity1000 Ltr Internal width820mm Internal depth840mm Internal height1500mm Electric heatingcheck Electric capacity18 KW, 380 Volt Number of doors:1 With fancheck Motor1,5 KW, 220/380 Volt With rack mounted on wheels:Mobile rack: (11 slots 700x790mm) MaterialStainless steel General With switchgear(as is) Floorspace1,4x1,4 M Total height2,5 M Weight700 KG Extra Specificationsweek program is not programmable.Consumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersC ...

General SKU027E101 MakeApex Construction Ltd. Type114 DW-SF No.A-40880 Year of constructionunknown Mounted on framecheck Main Features Motor22 KW Inlet diameter260 mm Width295 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeø 260 x 295 mm Fixed hammerscheck With sieve cage2x pore size 1.25 mm: 1x 1.75 mm With hoppercheck Inletfeeding through twin screw metering screw Motor22 kW (380 V,1470 rpm) Speed750 rpm Hammer Mills Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) General LocationBarneveld Mounted on wheelscheck With switchcheck Floor space2,0 x 1,3 m Total height2,4 m Weight1100 kg Extra Specifications- Mirror polished finishing- Double Dosing Screw&:nbsp: &:nbsp: Motor 0.55 kW&:nbsp:&:nbsp:&:nbsp:&:nbsp:Gearbox output 5.7 – 34 rpm (manual variator)&:nbsp:&:nbsp:&:nbsp:&:nbsp:Dosing screw capacity: maximum  ...

General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decanter:Three phase twin drive decanter: (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel General LocationBarneveld With switchgear(as is) Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgConsumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherDiscountOrganicsE-waste & metalAnimal feedDyes & pigmentsDecantersPlastic & rubberMinerals & inorganicGEA WestfaliaIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Che ...

General SKU094Y625 MakeCondux TypeHR9/N3 No.92 Year of construction1988 LocationBarneveld Main Features MaterialStainless steel Motor13 KW Specified Features - Cutter Cutter:Slicer/chipper: (1x) Knife diameterdia. 900mm Inlet480x160mm, Outlet 700x250mm Motor± 13,0 KW MaterialStainless steel With jacketcheck General Floorspace1,3x1,2 M Total height1,8 MConsumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersCuttersFeed additivesPaper & otherDiscountDetergent & surf.CosmeticsOrganicsFood additivesSolid pharmaceuticsDyes & pigmentsPlastic & rubberConduxIndustries > Recycling > Consumer wasteIndustries > Food & Feed > Powdered foodsIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersMills > CuttersIndustries > Food & Feed > Feed additivesIndustries > Recycling > Paper & otherDiscountIndustries > Chemical > ...

General SKU160P705 MakePallmann TypePP 4 No.0668145 Year of construction1968 LocationBarneveld Main Features Motor22.5 KW Inlet diameter155 mm Width100 mm Specified Features - Fine Impact Mill Turbo cone millcheck 2 Driven rotorsimpeller &: co-rotating baffle plate Rotor sizeInner roter ø 396 mm: Outer roter 400 mm Grinding room sizeø 600 Inlet155 x 100 mm Motor15 kW + 7,5 kW, 380 V SpeedMax. 4100 rpm: Grinding disc 1450 rpm Fine Impact Mills MaterialMild steel General With switchgear(as is) Floorspace2,1 x 1,1 m Total height0,8 mConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarFine Impact MillsAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inor ...

General SKU248S161 MakeLMG Lübecker Maschinenbau Geselschaft mbH LocationBarneveld CEcheck TypeAK-6.1002 Pressure Working pressure6 Bar Working pressure jacket4 Bar Main Features MaterialMild steel Volume2750 Ltr. Motor22 KW Specified Features - Mild Steel Reactor Reactorcheck Capacity2750 ltr Vessel sizesdia. 1400x3000mm Conical bottomcheck Dished top sidecheck Manholedia. 400mm Top connectionsDN150 (1x), DN 80 (2x), DN25 (2x), DN15 (2x) OutletDN80 With jacket(254 / 187 ltr) Max. temperature300 degr. C With propellor stirrercheck Motor22 kW 380-420/660-725 Volt Speed mixing shaft1460 rpm Mild Steel Reactors MaterialMild steel Information No.4240077 Year of construction2004 Floorspace1,7x1,7 M Total height4,0 M Weight4500 KgConsumer wastePaints & coatingsOther chemicalRubberPlastic & polymersCatalysts & fillersSolventsDetergent & surf.OrganicsE-waste & ...

General SKU356W956 MakeBühler TypeDFZH-2 No.10267697 Year of construction1996 Main Features Motor185 KW Width850 mm Specified Features - Hammer Mill Hammer millcheck Rotor sizeDia. 780 x 120 mm (2x) Grinding room sizeDia. 850 x 160 mm (2x) Moving hammerscheck Hammer width7 mm With sieve cage3,5 mm (3x), 4 mm (3x), 5 mm (2x) With hopper(outlet hopper, outlet size 200 x 200 mm) Inlet320 x 200 mm Motor2x 90 kW (380 volt, 2966 rpm) Speed2966 rpm Hammer Mills MaterialMild steel General Mounted on framecheck LocationBarneveld Floor space2,40 x 1,70 m Total height4,3 m Weight3500 kg Extra Specificationsinlet with dosing unit. Buhler Type: DFAT-2with fan, type: FXH 15.06 spez ALSfan motor: 2,2kW, 400VConsumer wasteHammer MillsCatalysts & fillersFeed additivesOrganicsE-waste & metalAnimal feedOther feedDyes & pigmentsPlastic & rubberNew arrivalsMinerals & inorganicB ...

General SKU050A271 MakeD.O.S. Dutch Oven Systems Year of construction1995 LocationBarneveld Main Features MaterialMild steel Volume2500 Ltr. Specified Features - Drying oven Drying ovencheck Number of compartments:1 Capacity2500 Ltr. Internal width1050 mm Internal depth1450 mm Internal height1750 mm Gas heatingcheck Number of doors:1 With fancheck Motor2,2 KW MaterialMild steel General With switchgear(as is) Floorspace2,0 x 2,2 m Total height3,2 m Weight1500 kg CEcheck Extra Specifications- Burner make Weishaupt, type WG-10N/1A (10-42 KW)Consumer wastePaints & coatingsDrying ovensFine chemicalsOther chemicalRubberAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherDiscountCosmeticsOrganicsE-waste & metalDyes & pigmentsAPIPlastic & rubberMinerals & inorganicDutch Oven SystIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatings ...

General SKU404U1219 LocationBarneveld MakeAlbi Alois Binderberger Pressure Working pressure0.99 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume4000 Ltr. Motor3 KW Specified Features - Bioreactor Reactorcheck Capacity4000 Ltr. Vessel sizesDia. 1800x2460 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN50, DN25(2x) OutletDN50 Half coil jacketed(100 Ltr.) With paddle stirrercheck Motor3 kW, 380/660Volt, 1400/103rpm Speed mixing shaft103 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4571 (316Ti) General No.767 Year of construction1986 Floorspace1,85x1,85 m Total height2,46 m Weight±2500 kgConsumer wastePaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherSolventsDetergent  ...

General SKU201P112 LocationBarneveld MakeBOLZ GmbH No.M 1107 T 4402 Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume11800 Ltr. Motor15 KW Specified Features - Conical mixer Conical mixercheck Capacity11800 l (gross) Largest cone diameter2900 mm Cone height4900 mm Dished topcheck Manholeø 600mm With stainless steel armcheck Top drivecheck Motorscrew +/- 15 kW (400 V) 65 rpm Motorarm 1,5 kW (400 V) 35 rpm Cantilevered screwcheck With jacket1200 l (20m2) Max. temperature100°C MaterialStainless steel 1.4552 With jacketcheck General Year of construction1988 Floor space3,2 x 3,2 m Total height6,5 m Weight±7000 kg Extra Specifications- used as a cooler.Consumer wastePaints & coatingsPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalPlastic & polymersFeed additivesPaper & otherOther pharmaceuticsCosmeticsOrganic ...

General SKU041Z170 MakeForplex Chateaubriant TypeFL-4 No.562 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt Fine Impact Mills MaterialMild steel General Floorspace1,2x1,3 M Total height1,5 M Weight1900 KGConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarFine Impact MillsAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicForplexIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIn ...

General SKU016A149 Makeunknown, manufacturer plate is missing LocationBarneveld Material Housing materialStainless steel 1.4301 (304) Main Features Inlet diameter220 mm Width440 mm Specified Features - Lump breaker Lump breaker(1x) Rotor sizesdia. 220x450mm Material Rotor CuNi 90/10 Inletdia. 350mm, Inlet flange dia. 505mm General Extra SpecificationsMaterial Rotor CuNi 90/10Without motor&:nbsp:Gearbox ratio 15:1Consumer wastePowdered foodsGeneric medicinesLump breakersRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDiscountDetergent & surf.CosmeticsOrganicsAnimal feedOther feedMinerals & inorganic-Industries > Recycling > Consumer wasteIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesBreakers > Lump breakersIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Pl ...

General SKU201P079 MakePfaudler-Werke AG (DE) TypeT800 No.204401 Year of construction1971 LocationBarneveld Pressure Working pressure1.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialMild steel Volume898 Ltr. Motor1.5 KW Specified Features - Mild Steel Reactor Reactorcheck Capacity898 Ltr Vessel sizesdia.1100mm x1000mm Dished bottomcheck Dished top sidecheck Top connectionsdia.200mm, dia.80mm, (3x)dia.70mm Outletdia.50mm With jacket(174 Ltr) Max. temperature200 degr.C. With propellor stirrercheck Motor1,5 KW, 230/400 Volt (EEX) Speed mixing shaft86 rpm With jacketcheck Mild Steel Reactors MaterialMild steel General Floorspace1.4x1.2 M Total height2,6 M Weight1400 KG ATEX designedcheck Extra SpecificationsNot glassedConsumer wastePaints & coatingsOther chemicalRubberPlastic & polymersCatalysts & fillersPaper & otherSolvent ...

General SKU041Z171 MakeForplex Chateaubriant TypeFL-4 No.561 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt Fine Impact Mills MaterialMild steel General Floorspacemill 1,2x1,3 M Total height1,5 M Weight1900 KGConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarFine Impact MillsAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicForplexIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered fo ...

General SKU244U279 MakeAllgaier-Werle GmbH TypeTSM 2000/2 LocationBarneveld Main Features MaterialMild steel/Stainless steel Surface2.6 m2 Sizes diameter1850 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2.6 m² Number of sieve decks:2 Sieve sizesDia: 1850 mm With covercheck InletDia: 300 mm OutletDia: 190 mm Drive excentercheck Motor2,2 kW,220/380 Volt, 1410 rpm With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4301 (304) General No.2450 Year of construction1982 Floor space2,4x2,1 m Total height1,65 m Weight1000 kg Extra Specifications- No sieve deck includedConsumer wastePowdered foodsGeneric medicinesStarchOther chemicalRubberPlastic & polymersFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsTumbler screening machinesPlastic & r ...

General SKU284Y446 MakeMega Sp. J. TypeFrozen Lump Breaker No.12/343 Year of construction2012 Main Features Motor1.1 KW Width920 mm Specified Features - Lump breaker Breakercheck Roll breakercheck Teeth height20 mm Roll sizesø 230 x 467 mm With hopper± 1200 l. Inlet1220 x 920 mm Outlet560 x 830 Motor1,1 kW 230-400 V 1430 rpm With variable speed drivecheck MaterialStainless steel 1.4305 (303) General LocationBarneveld Floorspace1,52 x 0,94 m Total height2,8 m Weight430 kgConsumer wastePowdered foodsGeneric medicinesLump breakersRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganicsAnimal feedOther feedMinerals & inorganicMega Sp. J.Industries > Recycling > Consumer wasteIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesBreakers > Lump breakersIndustries > Chemica ...

General SKU284Y451 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor11 KW Specified Features - Decanter 3-Phase decantercheck Screw diameter230 mm Screw length690 mm Inletø 20 mm Liquid outletø 90 mm Solids outlet100 x 320 mm Motor11,6 kW, 400V, 2940 rpm and 4 kW, 400 V, 2905 rpm With variable speed drivefrequency converter Max. rotor speed6000 rpm Adjustable weircheck MaterialStainless steel 1.4463 General MakeFlottweg Serial002.183.13 TypeTricanter Z23-4/441 Year of construction2008 Mounted on framecheck With switchgear(as is) Floorspace1,8x1,8 m Total height1,5 m Weight1350 Extra Specificationsmax. density sediment: 2,4g/cm³Consumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherOrganicsE-waste & metalAnimal feedDyes & pigmentsDecantersPlastic & rubberNew arrivalsMinerals & inorganicFlottwegIn ...

General SKU079B444 MakeAviteq Vibrationstechnik TypeOA-1150/350-UVB No.6300095-001 Mounted on framecheck Specified Features - Vibro feeder Material finishPolished inside With jacketcheck Main Features MaterialStainless steel Length1150 mm Width350 mm Specified Features - Vibro feeder Vibro feeder(1x) Feeder width350mm Feeder length1150mm Feeder height275mm Closedcheck Inlet355x355mm With motor0,3 KW, 230/400 Volt (2x) MaterialStainless steel 1.4301 (304) General LocationBarneveld Floorspace1,8 x 0,9 m Total height1,0 m Weight380 kgConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalVibro feedersPlastic & rubberMinerals & inorganicAviteqIndus ...

General SKU253M221 LocationBarneveld MakeBauermeister &: Co. Norderstedt TypeUT-63 Main Features Motor185 KW Inlet diameter1200 mm Width400 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeDia. 1200x400mm Grinding room sizeDia. 1200x400mm With sieve cage(Pore size ø 220 µm) With grinding trackcheck Housing dimensions 2000x0,55x1800 mm InletDia. 400 mm Motor185,0 KW, 415 Volt Fine Impact Mills MaterialMild steel, Stainless steel 1.4462 (Duplex2205) General No.940785 Year of construction1989 Mounted on framecheck Floor space3,9x1,5 m Total height3,0 m Weight8500 kg Extra Specifications-- RECONDITIONED --Consumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchReconditionedAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarFine Impact MillsAnimal  ...

Wastewater treatment plant designed to neutralise the pH of the wastewater prior to discharge to the sewage treatment works. The production wastewater is first collected in a stainless steel storage tank, which is equipped with a level control system, a circulation pump and an overflow pipe. The collection tank serves as a buffer against fluctuations in pH and volume, and helps to prevent peak loads in the neutralisation tank. Once a certain level is reached, the wastewater is fed into the neutralisation tank via a pneumatic shut-off valve. If the pH value in the neutralisation tank is too high, the pneumatic valve delays the flow of wastewater. In the neutralisation tank, the pH value of the wastewater is measured and a defined quantity of acid or alkali is fed from the chemical dosing station via ProMinent dosing pumps. A top-entry agitator ensures rapid mixing. Once a certain level is ...

General SKU404U1227 MakeLudwig Edel LocationBarneveld Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume5400 Ltr. Motor3 KW Vacuumcheck Specified Features - Bioreactor ReactorBioreactor Capacity5400 Ltr. (max. 7350 Ltr.) Vessel sizesdia. 1800x3250 mm Dished bottomcheck Dished top sidecheck ManholeDN450 Top connectionsDN100 OutletDN50 With jacket(73 Ltr.) Half coil jacketedcheck With paddle stirrer(double) Motor3 kW, 380/660Volt, 1400/90rpm Speed mixing shaft90 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4571 (316Ti) General No.85 239/1 Year of construction1986 Floorspace2x2 m Total height3,25 m Weight1600 kgConsumer wastePaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper ...

Centrisys decanter centrifuge set including: - a centrifuge -complete electrical cabinet -polymer preparation -eccentric pump All in perfect condition Currently in operation until the end of August 2026

Elevated Waste Plastic Transfer Powered Conveyor Approximate length 15-20 meters Auction-ID: A1-48805-76

General SKU251Y231 LocationBarneveld MakeXERION BERLIN LABORATORIES GmbH Serial4400/2020 Pressure Working pressure10 Bar Vacuum possiblecheck Main Features MaterialGraphite Max.temp.1800 °C Specified Features - Drying oven Drying ovenhigh-temperature graphitization furnace Max. temperature1800 °C Number of compartments:1 Electric heatingcheck Gas heatingPropane burner for ignition Electric capacity400 V Number of doors:1 Motorvacuum pump motor, lift bottom motor Suitable for nitrogencheck With cooling compressorrecirculating cooling system + emergency backup cooling With timercheck MaterialGraphite General TypeXGraphit Year of construction2021 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace1,5 x 1,7 m Total height2,5 m Weight3000 kg Extra SpecificationsMultiple protective gas options: Argon, Nitrogen (up to ~1,500°C)Automated  ...

General SKU251Y227 LocationBarneveld MakeFlottweg Main Features MaterialStainless steel Motor11 KW Specified Features - Decanter 3-Phase decantercheck Screw diameter230 mm Screw length690 mm Inletø 20 mm Liquid outletø 75 mm Solids outlet250x450 mm Motor11 kW (400V, 2940 rpm (Ex)) and 4 kW (400 V, 2905 rpm (Ex)) With variable speed drivecheck Max. rotor speed5500 rpm Adjustable weircheck MaterialStainless steel 1.4463 General Serial0.02.311.21 Typetricanter Z23-4/441 Year of construction2016 Mounted on framecheck With switchgear( as is) Floorspace1,9x1,7 m Total height1,4 m Weight1450 kg Extra Specificationsmax. density sediment: 2,9kg/dm³Consumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherOrganicsE-waste & metalAnimal feedDyes & pigmentsDecantersPlastic & rubberNew arrivalsMinerals & inorganicFlottwegIndustries  ...

General SKU281Y432 MakeAlfa Laval TypeAldec 10 No.5122673 Main Features MaterialStainless steel Motor10.8 KW Specified Features - Decanter 2-Phase decantercheck Screw diameter200 mm Screw length709 mm Inletø 22 mm Liquid outletø 35 mm Solids outlet310 x 170 mm Motor7,5 kW, 400 V, 2915 rpm:3,30 kW, 400 V, 5170 rpm With variable speed drivecheck Max. rotor speed5300 rpm MaterialStainless steel 1.4401 (316) General Year of construction2010 Mounted on framecheck LocationBarneveld With switchgear(as is) Floorspace2,10 x1,20 m Total height2,00 m Weight1000 kg CEcheck Extra SpecificationsMax density solids 3.0 kg/dm³,allowable temperature 0 — 60 °C,&:nbsp:Cone angle 10°, centrifugal force at maximum main speed 3146 G,control cabinet, spare screw,&:nbsp:Consumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherOrganicsE-wa ...

General SKU291Y499 MakeStephan TypeVCM 25 No.C 2554 Year of construction1983 Mounted on framecheck Main Features MaterialAluminium/Stainless steel Volume25 Ltr. Motor4 KW Specified Features - Cutter Bowl cuttercheck Capacity25 l. Diameter420 mm Depth250 mm Knife diameter260 mm, 280 mm, 320 mm With scrapercheck Can be tiltedcheck Motor4 kw, 380 V, 2900 rpm Speed1440/ 2900 rpm MaterialAluminium, Stainless steel 1.4301 (304) General LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace0,8x0,6 m Total height1,1 m Weight150 Extra SpecificationsWith toolingConsumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersCuttersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganicsFood additivesSolid pharmaceuticsDyes & pigmentsPlastic & rubberStephanIndustries > Recycling > Consumer wasteIndustries > Food & Feed > Powdered foodsIndustries > C ...

General SKU291Y509 MakeStephan Serial72207801 TypeUM/SK 5 Year of construction1995 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume5 Ltr. Motor0.75 KW Specified Features - Cutter Bowl cuttercheck Capacity5 l. Diameter220 mm Depth140 mm Knife diameter150 mm Number of knife blades1 With scraper(manual) Inletø 25 mm Outletø 15 mm With jacket( 0,7 l.) Max. temperature95 °C Motor0,75 kW, (400 V, 3000 rpm) With variable speed drivecheck Speed300—3000 rpm Materialstainless steel 1.4000 (aisi 429), Stainless steel 1.4306 (304L) With jacketcheck General Mounted on framecheck LocationBarneveld Mounted on wheelscheck With switchgear(as is) Floorspace1 x 1 m Total height1,45 m Weight300 kg Extra SpecificationsWith temperaturen control bath: Haake D8 (as is)Consumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersCuttersFeed ...

General SKU291Y547 LocationBarneveld MakeStephan TypeUm 12 Main Features MaterialStainless steel Volume12 Ltr. Motor1.9 KW Specified Features - Cutter Cuttercheck Bowl cuttercheck Capacity12 l. Diameter300 mm Depth200 mm Knife diameter190 mm Number of knife blades2 With scrapercheck Inletø 300 mm Outletø 300 mm Motor1,5/1,9 kW, 440 V Speed720—3400 rpm MaterialStainless steel 1.4016, Stainless steel 1.4301 (304) General No.714.381.07 Year of construction1989 Floorspace0,36 x 0,40 m Total height0,6 m Weight170 kgConsumer wastePowdered foodsRubberAgrochemicalsPlastic & polymersCuttersFeed additivesPaper & otherDetergent & surf.CosmeticsOrganicsFood additivesSolid pharmaceuticsDyes & pigmentsPlastic & rubberNew arrivalsStephanIndustries > Recycling > Consumer wasteIndustries > Food & Feed > Powdered foodsIndustries > Chemical > RubberIndustries > Chemical > A ...

Power: 600 watts Voltage: 230 V~50 Hz Thermal protection: 65 °C Flow rate: 270 l/min Pressing distance: up to 80 m Pressing height: up to 8 m Auction-ID: A7-49495-152

250 W motor Operating range from 3 to 10 m³/h Epoxy-based coating for corrosion protection High-voltage capacitors Copper motor winding Stainless steel motor shaft Integrated float that kicks in as soon as the water level rises Thermal protection against overheating Auction-ID: A7-49495-499

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-427

Fetra rolling tipper for the collection and transport of metal shavings, industrial waste or bulk materials. Equipped with a manual tilting system with locking and a chassis on wheels for easy movement. Robust steel construction suitable for workshops, warehouses, production and recycling areas. Content included according to photos. Auction-ID: A1-48554-428