waste compactor used for sale

6.5HP; 40cm/s; 13Kn; wheels; foldable; 6528 Auction-ID: A1-45506-4

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 20,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 6,840 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Of course, you can also use your tank ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Fuel oil tank tank system diesel tank and other hazardous substances. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled gerabuct including an officially recognised test certificate. The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length approx. 9,990 mm Diameter approx. 2,000 mm Weight approx. 6,500 kg Of course, you can also use your t ...

Ladies and gentlemen, Pictures and further information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place of jurisdic ...

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Fuel oil tank tank system diesel tank and other hazardous substances. 50,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 50,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9,000 kg Of course, you can also use  ...

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Ready exhibition machine MERCODOR ZM 52 Year 2015 Mercodor Shredder ZM 52 Cutting area 650 x 540 mm or 1050 x 540 mm with 22 kw

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

This is a second hand machine with 22 kw. Knife 24 3 mm hook complete with Hopper, base and switchgear.

Abbot dressing plant for chemical (Basic) media (ammonium sulphate) the plant has been used year 2010 (pump 2012) 1 x, then the company has been closed with wild diaphragm pump with ARTA dry clutch DN15 - DN150 complete documents, certificates, declarations of conformity of the individual components possibly Verohrung to but not part of the sale 2011 was once again a wild pulsation dampers for 2800,-€ upgraded Material - new price 17.000,-€, used only by the finest components from ARTA, Düperthal, wild

1 wastewater treatment plant for the treatment of industrial wastewater The wastewater load of approx. 136m³ / day from the albi fruit juice Production ranged from 2,000 mgO2/l to 8,000 mgO2/l Running time 24 hours, input approx. 5.6 m³/h, COD degradation up to 975 kg COD/day The complete wastewater treatment plant consists of the following components: A.) 1 free-standing company building to accommodate the 3 rotary lobe blowers an exhaust fan and control system S 7, in 5 control cabinets and 1 small control laboratory B.) 1 drain and measuring shaft, can be entered with stepladder inside of the operating building with 3 chambers for the regulation of the Equipped with Ind. flow meter from Endress & Hauser in DN50, max. effluent volume of activated sludge with solids content smaller than 1% with 0- 3 l per sec C.) 1 blower station with 3 sonically encaps ...

Auction-ID: A1-44302-309

Waste-Box Collector, waste collector, blower, fan, filter system - Monitoring device for waste quantity and waste quality in waste suction -for taking samples from teasels or cleaners -Dimensions: 1200/800/H1700 mm -Weight: 248 kg

AUTOMATIC GUILLOTINE type TAGLIABUE TIA 3050 second hand hydraulic cutting system Cutting length mm 3020 Pressor stroke mm 110 Electrical rear feed - Max rear feed width mm 1250 - min rear feed width mm.23 Hydraulic unit motor power Hp 10 Rear feed motor power Hp 0.75 Safety photocells Weight kg 4000

Waste oil collection tank 950 litres approved for liquids of hazard class AI-III With test certificates State: Technically deficialy Optical: According to age

Waste oil collection device, mobile oil collection container -Volume: 90 l -Dimensions: 650/450/H1200 mm -Weight: 35 kg

Waste oil collection container -Container: Ø 660 x 1250 mm -Container: tiltable -Weight: 30 kg

Wastewater treatment plant, drilling water purification, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -Equipment: as shown in pictures, conveyor belt filter/agitator -Dimensions: 1100/710/H1650 mm -Weight: 130 kg

XXL Large tire detwulster for OTR tires up to 1600 mm inner diameter! Mobile on rolling frame. Transport with unrolling tipper. Weight approx. 9500 kg, length approx. 6500 mm. Very good condition!

Desposer kitchen waste disposal unit, waste shredder, garbage chute -Power: 0.75 kW -Voltage: 230/460 V -Speed: 1725 rpm (60Hz) -Connection: Ø 170 mm -Quantity: 2 available Price: per piece -Dimensions: 230/H440 mm -Weight: 20 kg

Includes various buckets Auction-ID: A1-41275-425

for pressing PET bottles

The scope of delivery includes: 01x Dumpster, second choice Manufacturer: Weber Total width: approx. 1,360 mm Total depth: approx. 770 mm Total height: approx. 1,310 mm Content: 360 kg Volume: 770 liters Further data / information: Material color bin: black Material color lid: yellow Usable width: approx. 1,085 mm Useful depth: approx. 640 mm Usable height: approx. 1,000 mm Material: Polyethylene (PE) Tyres: 4 tyres (2x braked) Net weight: 68 kg Note: Useful width, useful depth are tapered downwards. General information about the article: This item is for pickup only. An additional desired transport or shipment of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery from us.

Auction-ID: A1-41275-277

Doppstadt DW 3060 Biopower Type F - Built in 2017 - Hours 6118 - Engine MTU 490 hp - AD BLUE - Weight 25,000 kg - 42 teeth -Remote control - Humidification system - Rear conveyor 5.5m - Overbelt magnet Machine is overhauled and immediately available

ID2841 Wagner WS22 year/Bauahr 2010 ran only a little 3.7t Shredder, 22 KW Shredder, 22 KW

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

9 mobile waste bins, 4 x grey, 5 x blue each 600x350x750 mm Auction-ID: A7-45677-123

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg

Waste container galvanized, brand Schäfer with castors and plastic lid, BJ. 1992, 2..500 l capacity, perm. Total weight 1.5 tons, good condition for sale

UK Power Generators is selling Waste Heat Recovery Unit. We are leading supplier of Industrial Equipment for Power Plants and accessories. Contact us today if you are interested in the above listed product. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

ROLL WASCH Slitting line for wastewater Sludge centrifuge Model No.: RFC-20 400 V

Mercodor twin-shaft shredder with a cutting space of 1200x600 mm, knife loading, optionally e.g. 40 mm, 3 hooks or 20 mm, 25 hooks... Solid housing welded design with appropriate bearing and sealing to the cutting chamber.

Type of packing machine Height 1900 mm Width 1400 mm Length 2150 mm Power supply: 400V 50Hz 3N Total power 7.5 kW Main Material: Galvanized Steel Hunkeler Systeme AG Channel Press, Model:, HSM AK 12-600, Pressure: 16 tons, Power supply 380 V, 50 Hz, 7.5 kW, Overall dimensions: 2150 mm x 1400 mm x 1900 mm, 2900 mm x 1300 mm x 1850 mm, 1200 mm x 900 mm x 1200 mm 1600 mm x 400 mm x 350 mm.

Specifications Bag dimensions: 1m3 Year of Make: 1999-2000 Weight of the bag: do 500 kg Productivity: 500 kg/h Power connection: 400V/2.2 kW

Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 A Serial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Ballenformat / Bale format max. 700 x 500 x 500mm Ballengewicht / Bale weight 40 - 80Kg Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

SPECIFICATIONS: Installed power: 18.5 kW Inlet width: 300 mm Inlet height: 200 mm Rotor: Ø 252 mm Intake manifold: Ø 200 mm For the shredding of the following wood waste: - MDF strips - Pressed chipboard -Plywood -Cardboard EQUIPMENT: Motorized carpet: 11000 x 330 mm

Manufacturer:Husmann Model: HL II 1622 Year of Manufacture: 2020 - Maximum RPM: 20 – 40 - Operating Voltage: 230V / 400V - Operating Pressure: 400 bar - Power: 330 kW - Permissible Total Weight: 22,000 kg - CE Certified Find more here - / Contact us at -

waste oil collecting tank: . filling capacity: 1000 Liter : . with level indicator: . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 300 mm material thickness: 3 mm cross cut: weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5, 1, 1 m Coil Shredder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 tanks filled with e.g. fruit pomace, capacity 2 x 25,000 l Product is introduced into the tanks via a screw, set up on 2 frames for the underpass of the silo truck Height of the tanks: 6.50 m, D: 3.60 m with top-mounted walkway with railing

Waste compactor - 3.5 t pressure